RESUMEN
In this study 5-((2-((3-methoxy benzylidene)-amino)-phenyl)-diazenyl)-4,6-diphenyl pyrimidine-2(5H)-thione was synthesized. The pharmacological applications of pyrimidine analogs are restricted due to their poor pharmacokinetic properties. As a solution, a microbial exopolysaccharide (curdlan gum) was used to synthesize folic acid-conjugated pyrimidine-2(5H)-thione-encapsulated curdlan gum-PEGamine nanoparticles (FA-Py-CG-PEGamine NPs). The results of physicochemical properties revealed that the fabricated FA-Py-CG-PEGamine NPs were between 100 and 400 nm in size with a majorly spherical shaped, crystalline nature, and the encapsulation efficiency and loading capacity were 79.04 ± 0.79 %, and 8.12 ± 0.39 % respectively. The drug release rate was significantly higher at pH 5.4 (80.14 ± 0.79 %) compared to pH 7.2. The cytotoxic potential of FA-Py-CG-PEGamine NPs against MCF-7 cells potentially reduced the number of cells after 24 h with 42.27 µg × mL-1 as IC50 value. The higher intracellular accumulation of pyrimidine-2(5H)-thione in MCF-7 cells leads to apoptosis, observed by AO/EBr staining and flow cytometry analysis. The highest pyrimidine-2(5H)-thione internalization in MCF-7 cells may be due to folate conjugated on the surface of curdlan gum nanoparticles. Further, internalized pyrimidine-2(5H)-thione increases the intracellular ROS level, leading to apoptosis and inducing the decalin in mitochondrial membrane potential. These outcomes demonstrated that the FA-Py-CG-PEGamine NPs were specificity-targeting folate receptors on the plasma membranes of MCF-7 Cells.
RESUMEN
The Expansion of modern industry underscores the urgent need to address heavy metal pollution, which is a threat to human-health and environment. Efforts are underwent to develop precise technologies for detecting heavy metal ions (M+-ion). One promising approach involves the use of Conjugated Microporous Polymers (CMPs) modified with Triphenylamine (TPA) anderylene (Peryl), known as TPA-Peryl-CMP, which emits strong refluorescence. Various analytical techniques, such as Brunauer-Emmett-Teller analysis, Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, and thermogravimetric analysis (TGA), are utilized to characterize the synthesized TPA-Peryl-CMP and understand its functional properties. In addition to its remarkable fluorescence behavior, TPA-Peryl-CMP shows promise as a sensor for Fe3+ ions using a turn-off strategy. Due to its exceptional stability and robust π-electron system, this platform demonstrates remarkable sensitivity and selectivity, significantly improving detection capabilities for specific analytes. Detailed procedures related to the mechanism for detecting Fe3+ ions are outlined for sensing Fe3+ ions, revealing a notably strong linear correlation within the concentration range of 0-3 µM, with a correlation coefficient of 0.9936 and the Limit of detection (LOD) 20 nM. It is anticipated that development of such a kind of TPA-Peryl-CMP will observe broader applications in detecting various analytes related to environmental and biological systems.
RESUMEN
This study explores the synthesis and characterization of aggregation-induced emission enhancement (AIEE)-active gold nanoclusters (AuNCs), focusing on their near-infrared luminescence properties and potential applications in biological imaging. These AIEE-active AuNCs were synthesized via the NaBH4-mediated reduction of HAuCl4 in the presence of peptides. We systematically investigated the influence of the peptide sequence on the optical features of the AuNCs, highlighting the role of glutamic acid in enhancing their quantum yield (QY). Among the synthesized peptide-stabilized AuNCs, EECEE-stabilized AuNCs exhibited the maximum QY and a pronounced AIEE effect at pH 5.0, making them suitable for the luminescence imaging of intracellular lysosomes. The AIEE characteristic of the EECEE-stabilized AuNCs was demonstrated through examinations using transmission electron microscopy, dynamic light scattering, zeta potential analysis, and single-particle imaging. The formation of the EECEE-stabilized AuNCs was confirmed by size-exclusion chromatography and mass spectrometry. Spectroscopic and electrochemical examinations uncover the formation process of EECEE-stabilized AuNCs, comprising EECEE-mediated reduction, NaBH4-induced nucleation, complex aggregation, and subsequent cluster growth. Furthermore, we demonstrated the utility of these AuNCs as luminescent probes for intracellular lysosomal imaging, leveraging their pH-responsive AIEE behavior. Additionally, cyclic arginylglycylaspartic acid (RGD)-modified AIEE dots, derived from cyclic RGD-linked peptide-induced aggregation of EECEE-stabilized AuNCs, were developed for single- and two-photon luminescence imaging of αvß3 integrin receptor-positive cancer cells.
Asunto(s)
Oro , Integrina alfaVbeta3 , Lisosomas , Nanopartículas del Metal , Oro/química , Lisosomas/química , Lisosomas/metabolismo , Integrina alfaVbeta3/metabolismo , Integrina alfaVbeta3/análisis , Humanos , Nanopartículas del Metal/química , Péptidos/química , Péptidos/síntesis química , Fotones , Imagen ÓpticaRESUMEN
The synthesis and characterization of ReS2 nanodots (NDs) are detailed, by highlighting their structure, morphological, and optical properties. ReS2 NDs were synthesized using NH4ReO4 as a rhenium source, thiourea as a sulfur source, and N-acetyl cysteine as a capping agent. The synthesis involved the hydrothermal reaction of these precursors, leading to the nucleation and growth of ReS2 NDs. Characterization techniques including transmission electron microscopy, energy dispersive X-ray spectroscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy confirmed the formation of ReS2 NDs with a spherical morphology, crystalline structure, and rich sulfur sites. The fluorescence behavior of ReS2 NDs was found to be influenced by the solution pH, with fluorescence intensity increasing with rising pH values. This pH-dependent fluorescence response was attributed to the dissociation of functional groups and the subsequent impact on the excited-state proton transfer process. The fluorescence intensity of ReS2 NDs showed a correlation with solution pH, enabling pH detection from 3.0 to 12.5 with an interval of 0.5 pH unit. Additionally, the incorporation of ReS2 NDs into a polyvinyl alcohol (PVA) matrix resulted in pH-sensitive phosphorescence, offering a new avenue for pH sensing. The strong interaction between PVA and ReS2 NDs was proposed to enhance phosphorescence intensity and trigger a blue shift in the phosphorescent peak at high pH. The ReS2 NDs/PVA-deposited filter paper exhibited pH-sensitive fluorescence and phosphorescence, which could be utilized as unique identifiers or authentication markers. Moreover, the ReS2 NDs/PVA-deposited filter paper showed potential for discriminating between hydrogen chloride and ammonia, based on their distinct fluorescence and phosphorescence responses.
RESUMEN
In this study, the synthesis of biologically active copper(II) complex [Cu(im)2]Cl2 was achieved using a reported method. Subsequently, this copper(II) complex was strategically grafted onto graphene oxide, resulting in the formation of a nanocomposite denoted as copper(II)-complex-grafted graphene oxide (Cu-GO). The comprehensive characterization of Cu-GO was conducted through various techniques, including X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), UV-visible spectroscopy, emission spectra analysis, X-ray photoelectron spectroscopy (XPS), and Copper K-edge X-ray Absorption Near Edge Structure (XANES) spectroscopy. The antibacterial efficacy of Cu-GO compounds was assessed using disk diffusion and microbroth dilution methods. Notably, the copper complex exhibited the highest effectiveness, showcasing a Minimal Inhibitory Concentration (MIC) value of 500 µL against Klebsiella bacteria. The antibacterial activities of all compounds were systematically screened, revealing the superior performance of the copper complex compared to standalone copper compounds. Expanding the scope of the investigation, we explored the antioxidant and anti-obesity activities of the copper complexes against Klebsiella organisms. The results underscore promising directions for the further exploration of the diverse health-related applications of these compounds. Moreover, the photocatalytic performance of the Cu-GO nanocomposite was evaluated under sunlight irradiation. Notably, the antioxidant and anti-obesity activities of Cu-GO, assessed in terms of percentage inhibition at a concentration of 200 mg/mL, exhibited values of 41% and 45%, respectively. Additionally, the Cu-GO composite exhibited exceptional efficacy, achieving a degradation efficiency of 74% for RhB under sunlight irradiation, surpassing both graphite and GO. These findings not only demonstrate enhanced biological activity, but also highlight a notable level of moderate photocatalytic performance. Such dual functionality underscores the potential versatility of Cu-GO nanocomposites across various applications, blending heightened biological efficacy with controlled photocatalysis. Our study offers valuable insights into the multifunctional attributes of copper(II)-complex-grafted graphene oxide nanocomposites, thereby paving the way for their broader utilization in diverse fields.
RESUMEN
In the present investigation of copper ferrite, a CuFe2O4 nanocomposite adsorbent was synthesized using the sol-gel method, and its relevance in the adsorptive elimination of the toxic Congo red (CR) aqueous phase was examined. A variety of structural methods were used to analyze the CuFe2O4 nanocomposite; the as-synthesized nanocomposite had agglomerated clusters with a porous, irregular, rough surface that could be seen using FE-SEM, and it also contained carbon (23.47%), oxygen (44.31%), copper (10.21%), and iron (22.01%) in its elemental composition by weight. Experiments were designed to achieve the most optimized system through the utilization of a central composite design (CCD). The highest uptake of CR dye at equilibrium occurred when the initial pH value was 5.5, the adsorbate concentration was 125 mg/L, and the adsorbent dosage was 3.5 g/L. Kinetic studies were conducted, and they showed that the adsorption process followed a pseudo-second-order (PSO) model (regression coefficient, R2 = 0.9998), suggesting a chemisorption mechanism, and the overall reaction rate was governed by both the film and pore diffusion of adsorbate molecules. The process through which dye molecules were taken up onto the particle surface revealed interactions involving electrostatic forces, hydrogen bonding, and pore filling. According to isotherm studies, the equilibrium data exhibited strong agreement with the Langmuir model (R2 = 0.9989), demonstrating a maximum monolayer adsorption capacity (qmax) of 64.72 mg/g at pH 6 and 302 K. Considering the obtained negative ΔG and positive ΔHads and ΔSads values across all tested temperatures in the thermodynamic investigations, it was confirmed that the adsorption process was characterized as endothermic, spontaneous, and feasible, with an increased level of randomness. The CuFe2O4 adsorbent developed in this study is anticipated to find extensive application in effluent treatment, owing to its excellent reusability and remarkable capability to effectively remove CR in comparison to other adsorbents.
RESUMEN
Addressing the limitations observed in previous studies, where the quantitative range of nanoprobes for detecting K+ and adenosine triphosphate (ATP) did not cover concentrations found within living cells, the present study aimed to develop ratiometric nanoprobes that can accurately sense changes in K+ and ATP levels in living cells and quantify them in human fluids. The proposed nanoprobes consisted of recognition flares modified with 6-carboxyfluorescein (FAM) and 5-carboxytetramethylrhodamine (TAMRA), along with thiolate single-stranded DNA (ssDNA) and molybdenum disulfide nanosheets (MoS2 NSs). The thiolate ssDNA acts as a linker between the flares and the MoS2 NSs, directly forming a functional nanostructure at room temperature. The direct conjugation of labeled flares to the MoS2 NSs simplifies the fabrication process. In the absence of K+ and ATP, the hybridization of flares and thiolate ssDNA caused FAM to move away from TAMRA, suppressing the fluorescence resonance energy transfer (FRET) process. However, upon the introduction of K+ and ATP, the flares undergo a structural transformation via the formation of G-quadruplex formation and the generation of hairpin-shaped structures, respectively. This structural change leads to the release of the flares from the ssDNA-conjugated nanosheet surface. The release of the flares brings FAM and TAMRA into close proximity, allowing FRET to occur, leading to FRET and static quenching. By monitoring the ratio between the fluorescence intensities of FAM and TAMRA, the concentration of K+ (5-100 mM) and ATP (0.3-5 mM) can be accurately determined by the proposed nanoprobes. The advantages of these nanoprobes lie in their ability to provide ratiometric measurements, which enhance the accuracy and reliability of the quantification process. The proposed nanoprobes offer potential applications as ratiometric imaging probes for monitoring K+ and ATP-related reactions in living cells, providing valuable insights into cellular processes. Additionally, they can be employed for determining the levels of K+ and ATP in human fluids, offering potential diagnostic applications in various clinical settings.
Asunto(s)
Técnicas Biosensibles , ADN de Cadena Simple , Humanos , Adenosina Trifosfato , Molibdeno/química , Reproducibilidad de los Resultados , Transferencia Resonante de Energía de Fluorescencia/métodos , Oligonucleótidos , Iones , Potasio , Colorantes Fluorescentes/químicaRESUMEN
Gold nanoclusters (AuNCs) are promising nanomaterials for ratiometric fluorescent probes due to their tunable fluorescence wavelengths dependent on size and structure, as well as their biocompatibility and resistance to photobleaching. By incorporating an additional fluorescence spectral peak, dual-emission AuNC-based fluorescent probes have been developed to enhance the signal output reproducibility. These probes can be fabricated by integrating various luminescent nanomaterials with AuNCs. This review focuses on the preparation methods and applications of ratiometric fluorescent probes derived from AuNCs and other fluorescent nanomaterials or fluorescent dyes for both in vitro and in vivo bioimaging of target analytes. Additionally, the review delves into the sensing mechanisms of AuNC-based ratiometric probes, their synthetic strategies, and the challenges encountered when using AuNCs for ratiometric bioimaging. Moreover, we explore the application of protein-stabilized AuNCs and thiolate-capped AuNC-based ratiometric fluorescent probes for biosensing and bioimaging. Two primary methods for assembling AuNCs and fluorophores into ratiometric fluorescent probes are discussed: triggered assembly and self-assembly. Finally, we address the challenges and issues associated with ratiometric bioimaging using AuNCs and propose future directions for further advancing AuNCs as ratiometric imaging agents.
Asunto(s)
Nanopartículas del Metal , Nanoestructuras , Nanopartículas del Metal/química , Colorantes Fluorescentes/química , Oro/química , Reproducibilidad de los Resultados , Espectrometría de FluorescenciaRESUMEN
This study synthesized two azide-functionalized monomers through p-dichloro xylene and double-decker silsesquioxane (DDSQ) units with NaN3 to form DB-N3 and DDSQ-N3 monomers, respectively. In addition, five different propargyl-functionalized monomers were also prepared from hydroquinone, bisphenol A, bis(4-hydroxyphenyl)methanone, 2,4-dihydroxybenzaldehyde (then reacted with hydrazine hydrate solution) and 1,2-bis(4-hydroxyphenyl)-1,2-diphenylethene with propargyl bromide to form P-B, P-BPA, P-CO, P-NP, and P-TPE monomers, respectively. As a result, various DDSQ-based main chain copolymers could be synthesized using Cu(I)-catalyzed click polymerization through DDSQ-N3 with different propargyl-functionalized monomers, of which the chemical structure and molecular weight could be confirmed by using Fourier-transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), and gel permeation chromatography (GPC) analyses. Differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), scanning electron microscope (SEM), transmission electron microscopy (TEM), and photoluminescence (PL) spectroscopy analyses also could characterize the thermal stability, morphology, and optical behaviors of these DDSQ-based copolymers. All results indicate that the incorporation of an inorganic DDSQ cage could improve the thermal stability such as thermal decomposition temperature and char yield, because of the DDSQ dispersion homogeneously in the copolymer matrix, and this would then affect the optical properties of NP and TPE units in this work.
RESUMEN
This study fabricated yellow-emitting CDs (Y-CDs) by hydrothermal treatment of citric acid and urea and applied them as a fluorescence turn-on platform for sensitive and selective detection of lipopolysaccharide (LPS) based on the non-shifted AIEE of peptide-stabilized CD aggregates. The designed peptide (named K3) consisting of aggregation-active and LPS-recognition units triggered the aggregation of Y-CDs, switching on their fluorescence through the blue-shifted AIEE process. The formed K3-stabilized Y-CD aggregates (K3-YCDAs) specifically interacted with LPS at neutral pH, demonstrating that the sequence of the decorated peptide was highly connected with their selectivity and sensitivity. The K3-YCDAs provided a fast response time (within 5 min) to detect LPS with a quantification range of 0.5-100.0 nM and a limit of detection (LOD, signal-to-noise ratio of 3) of 300.0 pM. By integrating ultrafiltration membranes as a concentration device with K3-YCDAs as a sensing probe, the LOD for LPS was further reduced to 3.0 pM. The determination of picomolar levels of plasma LPS by the K3-YCDAs coupled to the centrifugation ultrafiltration was demonstrated to fall within the specificity range of clinical interest for sepsis patients. Also, the K3-YCDAs served as a fluorescent probe to selectively image and quantify E. coli cells. The distinct advantages of the K3-YCDAs for LPS include fast response time, wide linear range, low detection limit, and excellent selectivity compared to previously reported sensors.
Asunto(s)
Carbono , Lipopolisacáridos , Humanos , Escherichia coli , PéptidosRESUMEN
In this study, we have used the one-pot polycondensation method to prepare novel 2D conjugated microporous polymers (Th-F-CMP) containing thiophene (Th) and fluorene (Fl) moieties through the Suzuki cross-coupling reaction. The thermogravimetric analysis (TGA) data revealed that Th-F-CMP (Td10 = 418 °C, char yield: 53 wt%). Based on BET analyses, the Th-F-CMP sample displayed a BET specific surface area of 30 m2 g-1, and the pore size was 2.61 nm. Next, to show the effectiveness of our study, we utilized Th-F-CMP as a fluorescence probe for the selective detection of Fe3+ ions at neutral pH with a linear range from 2.0 to 25.0 nM (R2 = 0.9349). Furthermore, the electrochemical experimental studies showed that the Th-F-CMP framework had a superior specific capacity of 84.7 F g-1 at a current density of 0.5 A g-1 and outstanding capacitance retention (88%) over 2000 cycles.
RESUMEN
We developed a triple-readout probe for colorimetric, fluorescent, and fluorescence-lifetime sensing of alkaline phosphatase (ALP) through the hydrolyzed ascorbic acid phosphate (AAP)-mediated formation of silver nanoparticles (AgNPs) on Ag+-deposited MoS2 quantum dots (QDs). Ag+ ions were self-assembled on a monolayer MoS2 QD surface through the formation of Ag-S bonds. When ALP hydrolyzed AAP in an alkaline buffer, the resultant ascorbic acid (AA) triggered the reduction of the bound Ag+ ions into AgNPs on the MoS2 QD surface. The resultant AgNPs induced an efficient fluorescence quenching of the MoS2 QDs through simultaneous static and dynamic quenching processes, generated an intense surface plasmon resonance peak, and triggered a reduction in the fluorescence lifetime of the MoS2 QDs. Electron microscopy and spectroscopic techniques revealed the successful fabrication of Ag+-deposited MoS2 QDs and the ALP-mediated formation of AgNPs on the MoS2 QD surface. The linear quantification ranges for ALP were 0.05-2.5, 0.1-4, and 1-4 units L-1 in the fluorescent, colorimetric, and fluorescence-lifetime detection modes, respectively. In addition, the proposed probe integrated with an ALP-linked sandwich immunoassay exhibited high sensitivity and selectivity for the fluorescence sensing of rabbit immunoglobulin G with a detection limit of 8 pg mL-1 and linear range of 25-1000 pg mL-1. The sensitivity of the probe is comparable to those of previously reported immunoassays involving ultrasensitive electrochemical detection, hydrogen evolution reactions, or electron spin resonance. The probe integrated with the sandwich assay serves as a promising platform for the detection of target proteins in clinical samples.
Asunto(s)
Fosfatasa Alcalina/metabolismo , Colorimetría/métodos , Disulfuros/química , Fluorescencia , Molibdeno/química , Puntos Cuánticos/química , Plata/química , Animales , ConejosRESUMEN
BACKGROUND/PURPOSE: Adequate decompression is the primary goal during surgical management of patients with traumatic brain injury (TBI). Therefore, it may seem counterintuitive to use minimally-invasive strategies to treat these patients. However, recent studies show that endoscopic-assisted minimally-invasive neurosurgery (MIN) can provide both adequate decompression (which is critical for preserving viable brain tissue) and maximize neurological recovery for patients with TBI. Hence, we reviewed the pertinent literature and shared our experiences on the use of MIN. METHODS: This was a retrospective multi-center study. We collected data of 22 TBI patients receiving endoscopic-assisted MIN within 72 hours after the onset, with Glasgow Coma Scale (GCS) scores of 6-14 and whose hemorrhage volume ranging from 30 to 70 mL. RESULTS: We have applied MIN techniques to a group of 22 patients with traumatic ICH (TICH), epidural hematoma (EDH), and subdural hematoma (SDH). The mean pre-operative GCS score was 7.5 (median 7), and mean hemorrhage volume was 57.14 cm3 Surgery time was shortened with MIN approaches to a mean of 59.6 min. At 6-month follow-up, the mean GCS score had improved to 12.3 (median 15). By preserving more normal brain tissue, MIN for patients with TBI can result in beneficial effects on recoveries and neurological outcomes. CONCLUSION: Endoscopic-assisted MIN in TBI is safe and effective in a carefully selected group of patients.
Asunto(s)
Lesiones Traumáticas del Encéfalo , Hematoma Epidural Craneal , Neurocirugia , Lesiones Traumáticas del Encéfalo/cirugía , Escala de Coma de Glasgow , Hematoma Epidural Craneal/cirugía , Hematoma Subdural/cirugía , Humanos , Estudios Multicéntricos como Asunto , Estudios Retrospectivos , Resultado del TratamientoRESUMEN
The modification of protein-stabilized gold nanoclusters with fluorophores has been intensively applied for the ratiometric detection of biomolecules, metal ions, and anions. This study developed a straightforward strategy to prepare lysozyme nanoparticle-encapsulated gold nanoclusters (LysNP-AuNCs) as a dual-emission probe for the ratiometric sensing of cyanide through fluorescence resonance energy transfer (FRET) without the conjugation of additional fluorophores. The reduction of gold ion precursors with lysozyme generated lysozyme-stabilized AuNCs under an alkaline pH, which were demonstrated to self-assemble into nanoaggregates during the formation of AuNCs. The aggregated lysozyme molecules on the AuNCs were treated with glutaraldehyde, triggering the conversion of the aggregated lysozymes into blue-emitting lysozyme nanoparticles. As a result, the AuNCs were well distributed inside a single lysozyme nanoparticle, as demonstrated by transmission electron microscopy. The presence of cyanide triggered the etching of the AuNCs in the LysNP-AuNCs, leading to the suppression of FRET from lysozyme nanoparticle to AuNCs. The LysNP-AuNC probe was implemented for FRET detection of cyanide with a linear range of 3-100 µM. Additionally, the selectivity of the LysNP-AuNC probe for cyanide toward other anions was remarkably high. The practicality of the proposed probe was evaluated by quantifying cyanide in tap water and soils and monitoring the liberation of hydrogen cyanide from cyanogenic glycoside-containing foods.
Asunto(s)
Oro , Nanopartículas del Metal , Cianuros/análisis , Glicósidos , Oro/química , Nanopartículas del Metal/química , Muramidasa/química , Suelo , Espectrometría de Fluorescencia , AguaRESUMEN
The phosphorescence of solid-state carbon dots (CDs) has been demonstrated to be susceptible to water molecules. However, solution-based CDs have been rarely exploited for phosphorescence detection of trace amounts of water in organic solvents. Here, we present a straightforward method to embed the CDs into NaCl nanocrystals and show their application for phosphorescence detection of the water content in organic solvents. The phosphorescent CDs inside NaCl nanocrystals were fabricated by hydrothermal treatment of poly(diallyldimethylammonium) (PDDA) polymers and their counter chloride ions (Cl-) in the presence of NaOH. Because of the interaction with quaternary ammonium surface groups of PDDA-based CDs (PDDA-CDs), the Cl- ions serve as a nucleation site to trigger NaCl nanocrystal formation. Electron microscopy and spectroscopy techniques demonstrate the embedment of PDDA-CDs into NaCl nanocrystals (PDDA-CDs@NaCl). The PDDA-CDs@NaCl exhibited excitation-independent phosphorescence and excitation-dependent fluorescence in ethanol, methanol, dimethyl sulfoxide, and dimethylformamide. In four different organic solvents, the phosphorescence QYs and lasting times of PDDA-CDs@NaCl range from 23 to 35% and 1.2 to 1.5 s, respectively. Once trace amounts of water are present in an organic solvent, the water-induced dissolution of NaCl nanocrystals switches off the phosphorescence of PDDA-CDs@NaCl. It was found that PDDA-CDs@NaCl was capable of detecting as low as 0.25% v/v water in ethanol and 0.125% v/v water in methanol. The above-discussed results provide fundamental insights regarding the embedment of phosphorescent CDs into a solid matrix as a solution-based sensor.
Asunto(s)
Carbono , Nanopartículas , Carbono/química , Cloruro de Sodio , Solventes/química , AguaRESUMEN
Acrylamide is a group 2A carcinogen and potential endocrine disruptor that can enter the ecosystem by various routes and has recently become a dangerous pollutant. This widely used chemical can enter the human body via air inhalation, food or water consumption, or skin contact. In this study, we developed a peptide probe for the detection of acrylamide by matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) after its micro-tagging with a peptide. Direct detection of acrylamide by MALDI-TOF MS is not feasible due to its poor ionization in the MALDI interface, which hinders its analysis by the technique. After microwave irradiation for 2 min, the formed acrylamide-peptide derivative was detected easily by MALDI-TOF MS without the need for extraction procedures. The procedure does not involve organic solvents and a water-soluble peptide that allows detection of acrylamide in small sample volumes with a limit of detection (LOD) of 0.05 ng/µL. The relative standard deviation (RSD) and relative error (RE) of the measurements were < 6.7% for intra- and inter-day assays. Gel-washing solutions from a polyacrylamide gel experiment were used as a model to study the efficiency of the developed method. Finally, we used the proposed method for the detection of free acrylamide in small volumes of lung epithelial cells (a model to test the air inhalation of acrylamide under a tiny volume of sample) and human urine. The developed method will enable rapid acrylamide detection in environmental and biological samples via a green approach based on microwave-assisted derivatization in water alongside the use of a less toxic derivatization reagent, reusable target plate, and miniaturization protocols.
Asunto(s)
Acrilamida/análisis , Sondas Moleculares/química , Péptidos/química , Acrilamida/orina , Animales , Línea Celular , Células Epiteliales/química , Humanos , Límite de Detección , Pulmón/química , Pulmón/citología , Ratones , Reproducibilidad de los Resultados , Solventes/química , Espectrometría de Masa por Láser de Matriz Asistida de Ionización Desorción/métodosRESUMEN
Sensors that can specifically and accurately detect glycosaminoglycans are rare. Here, a dual-mode platform for fluorescence intensity and lifetime sensing of plasma heparin and fluorescence imaging of heparan sulfate proteoglycan-expressed cancer cells was developed by stabilizing the intramolecular charge transfer (ICT) state of dansyl acid-labeling AG73 (DA-AG73) peptide with glutathione-capped gold nanoclusters (GSH-AuNCs). DA-AG73 peptides, including an electron-donor dimethylamino group and an electron-withdrawing sulfonamide moiety in the labeled DA molecules, emitted weak fluorescence due to the formation of the twisted ICT excited state. The complexation of heparin with DA-AG73 peptides followed by interacting with the GSH-AuNCs could restrict the rotation of the dimethylamino groups of the labeled DA molecules, triggering the transition from their twisted ICT state to ICT excited state. As a result, the fluorescence intensity and lifetime of the labeled DA molecules in DA-AG73 peptides were gradually enhanced with increasing the heparin concentration. The proposed platform provided excellent selectivity toward heparin and heparan sulfate and exhibited two linear calibration curves for quantifying 20-800 nM and 20-1000 nM heparin in the fluorescence intensity and lifetime modes, respectively. The proposed platform was practically applied for the fluorescence intensity and lifetime determination of plasma heparin and for the selective imaging of heparan sulfate proteoglycan-expressed cells.
Asunto(s)
Técnicas Biosensibles , Glicosaminoglicanos , Compuestos de Dansilo , Glutatión , Oro , Heparina , PéptidosRESUMEN
We disclose a straightforward approach to fabricate nanocomposites for efficient capture of Cr(VI) from an aqueous solution through the self-assembly of poly(ethyleneimine)-modified graphitic carbon nitride nanosheets (PEI-g-C3N4 NSs) and lysozyme fibrils (LFs). The as-made PEI-g-C3N4 NSs@LFs exhibited mesoporous structures with a high specific surface area of 39.6 m2 g-1, a large pore volume of 0.25 cm3 g-1, several functional groups (e.g., -N, -NH, -NH2, and -COOH), and a zero-point charge at pH 9.1. These merits allow the PEI-g-C3N4 NSs@LFs to further enhance their physical adsorption and electrostatic attraction with the negatively charged Cr(VI) species of HCrO4- and CrO42-, which is beneficial for the uptake of Cr(VI), >80%, from an aqueous solution in a wide pH range. Interestingly, X-ray photoelectron spectra indicate that the PEI-g-C3N4 NSs@LFs converted Cr(VI) to Cr(III) through visible-light-induced photoreduction. The adsorption of Cr(VI) on the surface of PEI-g-C3N4 NSs@LFs was found to obey the Freundlich isotherm model, signifying that they have a heterogeneous surface for the multilayer uptake of Cr(VI). In contrast, the PEI-g-C3N4 NSs and LFs as Cr(VI) adsorbents followed the Langmuir isotherm model. Adsorption kinetic studies showed that the uptake of Cr(VI) through the PEI-g-C3N4 NSs@LFs was highly correlated with a pseudo-first-order model, suggesting that physisorption dominates the interaction of Cr(VI) and the PEI-g-C3N4 NSs@LFs. In real-life applications, the PEI-g-C3N4 NSs@LFs were used for the detoxification of the total chromium in the industrial effluent and sludge samples.
RESUMEN
Oversulfated chondroitin sulfate (OSCS), a non-natural sulfated glycosaminoglycan, recognizes as a significant containment in the pharmaceutical heparin, and it could trigger adverse reactions. Chromatography-, electrophoresis-, electrochemistry-, and spectroscopy-related techniques are currently available for accurate and precise analysis of a trace amount of OSCS in heparin. Recently, emerging studies focus on developing colorimetric and fluorescent probes to monitor OSCS containments in heparin. Therefore, this current review aims to describe the sensing principle and procedure of the reported probes that are sensitive and selective toward OSCS in heparin without the interferences of other sulfated glycosaminoglycans. The reported OSCS-specific probes are comprehensively discussed according to the recognition elements of OSCS, including coralyne, AG73 peptides, positively charged tetraphenylethene derivatives, polythiophene polymer, and poly-L-lysine, protamine, superpositively charged green fluorescent proteins, and poly (diallyldimethylammonium chloride). The sensing of OSCS in heparin is generally achieved using, (i) the specific affinity of the recognition element with OSCS and heparin, (ii) heparinase-mediated hydrolysis of heparin, and (iii) OSCS-induced inhibition of heparinase activity. Additionally, coralyne-based DNA probes can detect OSCS in heparin in the presence of Ca2+ ions without the assistance of heparinase. This review will pave the way to design another sensing probe towards other sulfated contaminants, like dermatan sulfate.
Asunto(s)
Sulfatos de Condroitina , Heparina , Colorimetría/métodos , Contaminación de Medicamentos , Heparina/metabolismo , Liasa de Heparina/metabolismoRESUMEN
Currently, few phosphorescent materials (PMs) possess a long phosphorescence lasting time and have potential for application in chemical sensors. Herein, we disclose that the incorporation of few-layer molybdenum disulfide quantum dots (FL-MoS2 QDs) into poly(vinyl alcohol) (PVA) matrices leads to the emission of bright green phosphorescence with a long lasting time of 3.0 s and a phosphorescence quantum yield of 20%. This enhanced phosphorescence originates from the formation of O-Hâ¯S hydrogen bonding networks between the rich sulfur sites of the FL-MoS2 QDs and the hydroxyl groups of the PVA molecules, which not only rigidifies the vibration modes of the FL-MoS2 QDs but also provides an oxygen barrier. Further investigations reveal that the FL-MoS2 QD/PVA composites exhibit a longer phosphorescence lasting time than N,S-doped carbon dots, few layer tungsten disulfide quantum dots, Rhodamine 6G, and Rhodamine B in PVA matrices. Since heat efficiently induced the removal of water moisture from PVA matrices, the FL-MoS2 QD/PVA composites could be implemented for phosphorescence turn-on and naked-eye detection of temperature variations ranging from 30 to 70 °C. By contrast, the carbon dot/PVA composites were incapable of sensing environmental temperature due to their weak hydrogen bonding with the hydroxyl groups of PVA matrices. Additionally, this study reveals the potential of the FL-MoS2 QD/PVA composites as an advanced security ink for anti-counterfeiting and encryption applications. The given results could open a new direction for potential application of two-dimensional quantum dots in phosphorescence-based sensors and security inks.