Enhanced Electroactive Phases of Poly(vinylidene Fluoride) Fibers for Tissue Engineering Applications.

Nanofibrous materials generated through electrospinning have gained significant attention in tissue regeneration, particularly in the domain of bone reconstruction. There is high interest in designing a material resembling bone tissue, and many scientists are trying to create materials applicable to bone tissue engineering with piezoelectricity similar to bone. One of the prospective candidates is highly piezoelectric poly(vinylidene fluoride) (PVDF), which was used for fibrous scaffold formation by electrospinning. In this study, we focused on the effect of PVDF molecular weight (180,000 g/mol and 530,000 g/mol) and process parameters, such as the rotational speed of the collector, applied voltage, and solution flow rate on the properties of the final scaffold. Fourier Transform Infrared Spectroscopy allows for determining the effect of molecular weight and processing parameters on the content of the electroactive phases. It can be concluded that the higher molecular weight of the PVDF and higher collector rotational speed increase nanofibers' diameter, electroactive phase content, and piezoelectric coefficient. Various electrospinning parameters showed changes in electroactive phase content with the maximum at the applied voltage of 22 kV and flow rate of 0.8 mL/h. Moreover, the cytocompatibility of the scaffolds was confirmed in the culture of human adipose-derived stromal cells with known potential for osteogenic differentiation. Based on the results obtained, it can be concluded that PVDF scaffolds may be taken into account as a tool in bone tissue engineering and are worth further investigation.

Reaction kinetics of sonochemical oxidation of potassium hexacyanoferrate(II) in aqueous solutions.

We studied sonochemical reactions resulting from ultrasonic treatment of potassium hexacyanoferrate(II) in aqueous solutions using a custom-built apparatus working at 536 kHz. We concluded that primary reactions are completely dominated by oxidation of Fe(II) to Fe(III) and did not find any evidences for degradation of cyanide. At the highest concentration used in the present study (0.1 M) we detected formation of pentacyanoaquaferrate(II) complex, which is most probably formed in reactions between hexacyanoferrate(III) anions and hydrogen atoms or hydrated electrons formed in sonochemical processes. We also determined that hydroxyl radicals formation rate in our system, (8.7 ± 1.5)∙10-8 M∙s-1, is relatively high compared to other reported experiments. We attribute this to focusing of the ultrasonic wave in the sample vessel. Finally, we suggest that oxidation rate of hexacyanoferrate(II) anions can be a convenient benchmark of efficiency of sonochemical reactors.

Ultrasound assessment of the conversion of sound energy into heat in tissue phantoms enriched with magnetic micro- and nanoparticles.

PURPOSE: Nowadays, the improvement of ultrasonic hyperthermia therapy is often achieved by adding hard particles to the sonicated medium in order to increase the heating efficiency. The explanation of the phenomenon of ultrasonic heating still requires testing on tissue mimicking materials (TMMs), enriched with particles of different sizes and physical properties. Our goal was to determine, by comparing their quantitative acoustic properties, which TMMs, with magnetic micro- or nanoparticles, convert more ultrasonic energy into heat or which of the particles embedded in the agar gel act as more effective thermal sonosensitizers. METHODS: We manufactured a pure agar gel and an agar gel with the addition of magnetic micro- or nanoparticles in two proportions of 8 and 16 mg/ml. Ultrasound quantitative techniques, the broadband reflection substitution technique and backscattered spectrum analysis were used to characterize the samples by speed of sound (SOS), frequency-dependent attenuation, and backscattering coefficients. The integrated backscattering coefficients were also calculated. The quantitative parameters, scattering, and attenuation coefficients of ultrasound in phantoms with micro- and nanoparticles were estimated. Based on the attenuation and scattering of ultrasound in the samples, the ultrasonic energy absorption, which determines the heating efficiency, was evaluated. Additionally, the temperature increase during sonication of the phantoms by an ultrasonic beam was directly measured using thermocouples. RESULTS: The density of the materials with nanoparticles was higher than for the materials with microparticles with the same fractions of particles. The SOS for all materials ranged from 1489 to 1499 m/s. The attenuation in the whole frequency range (3-8 MHz) was higher for the materials with nanoparticles than for the materials with microparticles. For the materials with the lower content (8 mg/ml) of particles, the attenuation coefficient was 0.2 dB/(MHz cm). For the 16 mg/ml concentration of nanoparticles and microparticles, the attenuation coefficients were 0.66 and 0.45 dB/(MHz cm), respectively. The value of backscattering coefficient in the whole frequency range was greater for the materials with microparticles than for the materials with nanoparticles. The values of the integrated backscattering coefficient were 0.05 and 0.08 1/m for the materials with nanoparticles and 0.46 and 0.82 1/m for the materials with microparticles and concentrations of 8 and 16 mg/ml, respectively. The rates of temperature increase in the first 3 s due to ultrasonic heating were higher for the materials with nanoparticles than for the materials with microparticles. CONCLUSIONS: Based on acoustical measurements, we confirmed that all materials can be used as tissue phantoms in the study of ultrasonic hyperthermia, as their properties were in the range of soft tissue properties. We found that the nanoparticle-doped materials had greater attenuation and smaller scattering of ultrasound than the materials with microparticles, so absorption in these materials is greater. Thus, the TMMs with nanoparticles convert more acoustic energy into heat and we conclude that magnetic nanoparticles are more effective thermal sonosensitizers than microparticles. This conclusion is confirmed by direct measurement of the temperature increase in the samples subjected to sonification.

Ultrasonic scanner for in vivo measurement of cancellous bone properties from backscattered data.

A dedicated ultrasonic scanner for acquiring RF echoes backscattered from the trabecular bone was developed. The design of device is based on the goal of minimizing of custom electronics and computations executed solely on the main computer processor and the graphics card. The electronic encoder-digitizer module executing all of the transmission and reception functions is based on a single low-cost field programmable gate array (FPGA). The scanner is equipped with a mechanical sector-scan probe with a concave transducer with 50 mm focal length, center frequency of 1.5 MHz and 60% bandwidth at -6 dB. The example of femoral neck bone examination shows that the scanner can provide ultrasonic data from deeply located bones with the ultrasound penetrating the trabecular bone up to a depth of 20 mm. It is also shown that the RF echo data acquired with the scanner allow for the estimation of attenuation coefficient and frequency dependence of backscattering coefficient of trabecular bone. The values of the calculated parameters are in the range of corresponding in vitro data from the literature but their variation is relatively high.

Effect of ultrasound on nucleated erythrocytes.

In this experimental study, carp erythrocytes were used as nucleated cell models to test the hypothesis that ultrasound (US) exposure can cause the change in plasma membranes and hemoglobin. To identify target cell damage, we studied hemolysis, osmotic fragility, lipid peroxidation of red blood cells and oxidation of hemoglobin in the erythrocytes. The erythrocytes were exposed to 1 MHz continuous-wave US at the intensities of 0.61 to 2.44 W/cm2 for 5 min. These results showed that US sonication at the intensities of 1.90 and 2.44 W/cm2 led to an increase in the degree of hemolysis and, at the highest used intensity (2.44 W/cm2), an increase in osmotic fragility. Ultrasound in all the used intensities induced an increase in lipid peroxidation. The results obtained showed that the level of methemoglobin has a tendency to increase after US exposure. Our results suggest that the changes in biomembranes can be due to inertial cavitation induced by US, but we cannot say which stage of the inertial event causes the damage.