Cesium-mediated electron redistribution and electron-electron interaction in high-pressure metallic CsPbI3.

Electron-phonon coupling was believed to govern the carrier transport in halide perovskites and related phases. Here we demonstrate that electron-electron interaction enhanced by Cs-involved electron redistribution plays a direct and prominent role in the low-temperature electrical transport of compressed CsPbI3 and renders Fermi liquid (FL)-like behavior. By compressing δ-CsPbI3 to 80 GPa, an insulator-semimetal-metal transition occurs, concomitant with the completion of a slow structural transition from the one-dimensional Pnma (δ) phase to a three-dimensional Pmn21 (ε) phase. Deviation from FL behavior is observed upon CsPbI3 entering the metallic ε phase, which progressively evolves into a FL-like state at 186 GPa. First-principles density functional theory calculations reveal that the enhanced electron-electron coupling results from the sudden increase of the 5d state occupation in Cs and I atoms. Our study presents a promising strategy of cationic manipulation for tuning the electronic structure and carrier scattering of halide perovskites at high pressure.

Synthesis of Atomically Thin Hexagonal Diamond with Compression.

Atomically thin diamond, also called diamane, is a two-dimensional carbon allotrope and has attracted considerable scientific interest because of its potential physical properties. However, the successful synthesis of a pristine diamane has up until now not been achieved. We demonstrate the realization of a pristine diamane through diamondization of mechanically exfoliated few-layer graphene via compression. Resistance, optical absorption, and X-ray diffraction measurements reveal that hexagonal diamane (h-diamane) with a bandgap of 2.8 ± 0.3 eV forms by compressing trilayer and thicker graphene to above 20 GPa at room temperature and can be preserved upon decompression to ∼1.0 GPa. Theoretical calculations indicate that a (-2110)-oriented h-diamane is energetically stable and has a lower enthalpy than its few-layer graphene precursor above the transition pressure. Compared to gapless graphene, semiconducting h-diamane offers exciting possibilities for carbon-based electronic devices.

Synergistic enhancement of electrocatalytic CO2 reduction to C2 oxygenates at nitrogen-doped nanodiamonds/Cu interface.

To date, effective control over the electrochemical reduction of CO2 to multicarbon products (C ≥ 2) has been very challenging. Here, we report a design principle for the creation of a selective yet robust catalytic interface for heterogeneous electrocatalysts in the reduction of CO2 to C2 oxygenates, demonstrated by rational tuning of an assembly of nitrogen-doped nanodiamonds and copper nanoparticles. The catalyst exhibits a Faradaic efficiency of ~63% towards C2 oxygenates at applied potentials of only -0.5 V versus reversible hydrogen electrode. Moreover, this catalyst shows an unprecedented persistent catalytic performance up to 120 h, with steady current and only 19% activity decay. Density functional theory calculations show that CO binding is strengthened at the copper/nanodiamond interface, suppressing CO desorption and promoting C2 production by lowering the apparent barrier for CO dimerization. The inherent compositional and electronic tunability of the catalyst assembly offers an unrivalled degree of control over the catalytic interface, and thereby the reaction energetics and kinetics.

Cavity-Enhanced Raman Emission from a Single Color Center in a Solid.

We demonstrate cavity-enhanced Raman emission from a single atomic defect in a solid. Our platform is a single silicon-vacancy center in diamond coupled with a monolithic diamond photonic crystal cavity. The cavity enables an unprecedented frequency tuning range of the Raman emission (100 GHz) that significantly exceeds the spectral inhomogeneity of silicon-vacancy centers in diamond nanostructures. We also show that the cavity selectively suppresses the phonon-induced spontaneous emission that degrades the efficiency of Raman photon generation. Our results pave the way towards photon-mediated many-body interactions between solid-state quantum emitters in a nanophotonic platform.

Strongly Cavity-Enhanced Spontaneous Emission from Silicon-Vacancy Centers in Diamond.

Quantum emitters are an integral component for a broad range of quantum technologies, including quantum communication, quantum repeaters, and linear optical quantum computation. Solid-state color centers are promising candidates for scalable quantum optics due to their long coherence time and small inhomogeneous broadening. However, once excited, color centers often decay through phonon-assisted processes, limiting the efficiency of single-photon generation and photon-mediated entanglement generation. Herein, we demonstrate strong enhancement of spontaneous emission rate of a single silicon-vacancy center in diamond embedded within a monolithic optical cavity, reaching a regime in which the excited-state lifetime is dominated by spontaneous emission into the cavity mode. We observe 10-fold lifetime reduction and 42-fold enhancement in emission intensity when the cavity is tuned into resonance with the optical transition of a single silicon-vacancy center, corresponding to 90% of the excited-state energy decay occurring through spontaneous emission into the cavity mode. We also demonstrate the largest coupling strength (g/2π = 4.9 ± 0.3 GHz) and cooperativity (C = 1.4) to date for color-center-based cavity quantum electrodynamics systems, bringing the system closer to the strong coupling regime.

Vertical-Substrate MPCVD Epitaxial Nanodiamond Growth.

Color center-containing nanodiamonds have many applications in quantum technologies and biology. Diamondoids, molecular-sized diamonds have been used as seeds in chemical vapor deposition (CVD) growth. However, optimizing growth conditions to produce high crystal quality nanodiamonds with color centers requires varying growth conditions that often leads to ad-hoc and time-consuming, one-at-a-time testing of reaction conditions. In order to rapidly explore parameter space, we developed a microwave plasma CVD technique using a vertical, rather than horizontally oriented stage-substrate geometry. With this configuration, temperature, plasma density, and atomic hydrogen density vary continuously along the vertical axis of the substrate. This variation allowed rapid identification of growth parameters that yield single crystal diamonds down to 10 nm in size and 75 nm diameter optically active center silicon-vacancy (Si-V) nanoparticles. Furthermore, this method may provide a means of incorporating a wide variety of dopants in nanodiamonds without ion irradiation damage.

Time-Resolved Luminescence Nanothermometry with Nitrogen-Vacancy Centers in Nanodiamonds.

Measuring temperature in nanoscale spatial resolution either at or far from equilibrium is of importance in many scientific and technological applications. Although negatively charged nitrogen-vacancy (NV(-)) centers in diamond have recently emerged as a promising nanometric temperature sensor, the technique has been applied only under steady state conditions so far. Here, we present a three-point sampling method that allows real-time monitoring of the temperature changes over ±100 K and a pump-probe-type experiment that enables the study of nanoscale heat transfer with a temporal resolution of better than 10 µs. The utility of the time-resolved luminescence nanothermometry was demonstrated with 100 nm fluorescent nanodiamonds spin-coated on a glass substrate and submerged in gold nanorod solution heated by a near-infrared laser, and the validity of the measurements was verified with finite-element numerical simulations. The combined theoretical and experimental approaches will be useful to implement time-resolved temperature sensing in laser processing of materials and even for devices in operation at the nanometer scale.

Tracking the engraftment and regenerative capabilities of transplanted lung stem cells using fluorescent nanodiamonds.

Lung stem/progenitor cells are potentially useful for regenerative therapy, for example in repairing damaged or lost lung tissue in patients. Several optical imaging methods and probes have been used to track how stem cells incorporate and regenerate themselves in vivo over time. However, these approaches are limited by photobleaching, toxicity and interference from background tissue autofluorescence. Here we show that fluorescent nanodiamonds, in combination with fluorescence-activated cell sorting, fluorescence lifetime imaging microscopy and immunostaining, can identify transplanted CD45(-)CD54(+)CD157(+) lung stem/progenitor cells in vivo, and track their engraftment and regenerative capabilities with single-cell resolution. Fluorescent nanodiamond labelling did not eliminate the cells' properties of self-renewal and differentiation into type I and type II pneumocytes. Time-gated fluorescence imaging of tissue sections of naphthalene-injured mice indicates that the fluorescent nanodiamond-labelled lung stem/progenitor cells preferentially reside at terminal bronchioles of the lungs for 7 days after intravenous transplantation.

SAX microscopy with fluorescent nanodiamond probes for high-resolution fluorescence imaging.

We report the use of fluorescent nanodiamonds (FNDs) as a photostable fluorescent probe for high resolution saturated excitation (SAX) microscopy. We confirmed that FNDs show a nonlinear fluorescence response under saturated excitation conditions generated by intense excitation light. Using FNDs, we quantified the spatial resolution improvement inherent in SAX microscopy, and experimentally demonstrated the scalability of the spatial resolution of SAX microscopy. The photostability of the FNDs allowed us to perform nanoparticle imaging of a multicolor-stained macrophage cell with a spatial resolution beyond the diffraction limit.

The biocompatibility of fluorescent nanodiamonds and their mechanism of cellular uptake.

The labeling of cells with fluorescent nanoparticles is promising for various biomedical applications. The objective of this study is to evaluate the biocompatibility and the mechanism of the cellular uptake of fluorescent nanodiamonds (FNDs) in cancer cells (HeLa) and pre-adipocytes (3T3-L1). With flow cytometry and the use of a battery of metabolic and cytoskeletal inhibitors, we found that the mechanism of the FND uptake in both cells is by energy-dependent clathrin-mediated endocytosis. In addition, the surface charge of FND influences its cellular uptake, as the uptake of poly-L-lysine-coated FNDs is better than that of oxidative-acid-purified FNDs at the same concentration in regular medium with or without serum. We also confirm that the proliferative potential of FND-treated and untreated cells does not exhibit any significant differences when measured at bulk cultures, and more stringently at clonal cell density. Further biocompatibility studies indicate that the in vitro differentiation of 3T3-L1 pre-adipocytes and 489-2 osteoprogenitors is not affected by the FND treatment. Our results show that FNDs are biocompatible and ideal candidates for potential applications in human stem cell research.

Alkali-hydroxide-doped matrices for structural characterization of neutral underivatized oligosaccharides by MALDI time-of-flight mass spectrometry.

We report new approaches using alkali-hydroxide-doped matrices to facilitate structural characterization of neutral underivatized oligosaccharides by matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) MS. The approaches involved pretreatment of the analytes with NaOH or LiOH in aqueous solution, followed by mixing them with MALDI matrices prior to MS analysis. It was found that for open-ended neutral underivatized oligosaccharides partial alkaline degradation occurred upon laser desorption and ionization of the hydroxide-pretreated analytes in 2,5-dihydroxybenzoic acid (DHBA). The effect intensified when nonacidic compounds such as 2,4,6-trihydroxyacetophenone (THAP) and 5-amino-2-mercapto-1,3,4-thiadiazole (AMT) were used as matrix. The degradation allowed facile identification of the reducing end residue of the analyte and facilitated its structural characterization by postsource decay TOF-MS. Applying the same technique using matrices composed of LiOH and THAP or AMT led to the production of singly as well as multiple lithiated ions of oligosaccharides containing hexoses with free 3-OH groups. Extensive lithiation through multiple hydrogen-lithium exchanges up to 6 Li atoms was observed for maltoheptaose, beta-cyclodextrin, and dextran 1500. Such a 'lithium tagging' technique makes it possible to differentiate positional isomers of milk-neutral oligosaccharides, lacto-N-difucohexaose I and II (LNDFH-I and LNDFH-II), without the need of chemical derivatization or tandem MS analysis.

Facile MALDI-MS analysis of neutral glycans in NaOH-doped matrixes: microwave-assisted deglycosylation and one-step purification with diamond nanoparticles.

A streamlined protocol has been developed to accelerate, simplify, and enhance matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) mass spectrometry (MS) of neutral underivatized glycans released from glycoproteins. It involved microwave-assisted enzymatic digestion and release of glycans, followed by rapid removal of proteins and peptides with carboxylated/oxidized diamond nanoparticles, and finally treating the analytes with NaOH before mixing them with acidic matrix (such as 2,5-dihydroxybenzoic acid) to suppress the formation of both peptide and potassiated oligosaccharide ions in MS analysis. The advantages of this protocol were demonstrated with MALDI-TOF-MS of N-linked glycans released from ovalbumin and ribonuclease B.

Mass production and dynamic imaging of fluorescent nanodiamonds.

Fluorescent nanodiamond is a new nanomaterial that possesses several useful properties, including good biocompatibility, excellent photostability and facile surface functionalizability. Moreover, when excited by a laser, defect centres within the nanodiamond emit photons that are capable of penetrating tissue, making them well suited for biological imaging applications. Here, we show that bright fluorescent nanodiamonds can be produced in large quantities by irradiating synthetic diamond nanocrystallites with helium ions. The fluorescence is sufficiently bright and stable to allow three-dimensional tracking of a single particle within the cell by means of either one- or two-photon-excited fluorescence microscopy. The excellent photophysical characteristics are maintained for particles as small as 25 nm, suggesting that fluorescent nanodiamond is an ideal probe for long-term tracking and imaging in vivo, with good temporal and spatial resolution.

High-speed mass analysis of whole erythrocytes by charge-detection quadrupole ion trap mass spectrometry.

Herein, we report an application of charge-detection quadrupole ion trap mass spectrometry to the measurement of total dry masses of mammalian and poultry erythrocytes evaporated/ionized by laser-induced acoustic desorption. The method is rapid and widely applicable. Eight different types of red blood cells (RBCs) have been successfully analyzed, including those of human, goat, cow, mouse, pig, and chicken. The measured mean masses (weights per corpuscle) range from 0.58 x 10(13) Da (9.6 pg) of goat RBCs to 2.80 x 10(13) Da (46.5 pg) of chicken RBCs. The total dry weights determined for human RBCs from a healthy male adult, a patient with iron-deficiency anemia, and a patient with thalassemia are 34.8, 28.8, and 20.6 pg, respectively. These weights, except that of thalassemia, are all approximately 10% higher than their corresponding mean corpuscular hemoglobin values determined by a commercial automated hematology analyzer. The mass distribution profiles of the cells are all near-Gaussian, with a standard deviation of 15% for the normal human RBCs. The deviation increases significantly to 20% for RBCs with thalassemia characteristics and 27% for RBCs with iron-deficiency anemia characteristics. All the observations are in accord with their corresponding mean corpuscular volume measurements, indicating an increase in anisocytosis (variation in RBC size) in the anemic samples. Our results suggest a broad and promising application of this new technology to high-speed mass analysis of RBCs and other biological whole cells as well.

Two-photon excited fluorescence of nitrogen-vacancy centers in proton-irradiated type Ib diamond.

Two-photon fluorescence spectroscopy of negatively charged nitrogen-vacancy [(N-V)-] centers in type Ib diamond single crystals have been studied with a picosecond (7.5 ps) mode-locked Nd:YVO(4) laser operating at 1064 nm. The (N-V)- centers were produced by radiation damage of diamond using a 3 MeV proton beam, followed by thermal annealing at 800 degrees C. Prior to the irradiation treatment, infrared spectroscopy of the C-N vibrational modes at 1344 cm(-1) suggested a nitrogen content of 109 +/- 10 ppm. Irradiation and annealing of the specimen led to the emergence of a new absorption band peaking at approximately 560 nm. From a measurement of the integrated absorption intensity of the sharp zero-phonon line (637 nm) at liquid nitrogen temperature, we determined a (N-V)- density of (4.5 +/- 1.1) x 10(18) centers/cm3 (or 25 +/- 6 ppm) for the substrate irradiated at a dose of 1 x 1016) H(+)/cm(2). Such a high defect density allowed us to observe two-photon excited fluorescence and measure the corresponding fluorescence decay time. No significant difference in the spectral feature and fluorescence lifetime was observed between one-photon and two-photon excitations. Assuming that the fluorescence quantum yields are the same for both processes, a two-photon absorption cross section of sigma(TPA) = (0.45 +/- 0.23) x 10(-50) cm(4).s/photon at 1064 nm was determined for the (N-V)- center based on its one-photon absorption cross section of sigma(OPA) = (3.1 +/- 0.8) x 10(-17) cm2 at 532 nm. The material is highly photostable and shows no sign of photobleaching even under continuous two-photon excitation at a peak power density of 3 GW/cm(2) for 5 min.