RESUMEN
P-type Bi2-xSbxTe3 compounds are crucial for thermoelectric applications at room temperature, with Bi0.5Sb1.5Te3 demonstrating superior performance, attributed to its maximum density-of-states effective mass (m*). However, the underlying electronic origin remains obscure, impeding further performance optimization. Herein, we synthesized high-quality Bi2-xSbxTe3 (00 l) films and performed comprehensive angle-resolved photoemission spectroscopy (ARPES) measurements and band structure calculations to shed light on the electronic structures. ARPES results directly evidenced that the band convergence along the [Formula: see text]-[Formula: see text] direction contributes to the maximum m* of Bi0.5Sb1.5Te3. Moreover, strategic manipulation of intrinsic defects optimized the hole density of Bi0.5Sb1.5Te3, allowing the extra valence band along [Formula: see text]-[Formula: see text] to contribute to the electrical transport. The synergy of the above two aspects documented the electronic origins of the Bi0.5Sb1.5Te3's superior performance that resulted in an extraordinary power factor of ~5.5 milliwatts per meter per square kelvin. The study offers valuable guidance for further performance optimization of p-type Bi2-xSbxTe3.
RESUMEN
Entropy-engineered materials are garnering considerable attention owing to their excellent mechanical and transport properties, such as their high thermoelectric performance. However, understanding the effect of entropy on thermoelectrics remains a challenge. In this study, we used the PbGeSnCdxTe3+x family as a model system to systematically investigate the impact of entropy engineering on its crystal structure, microstructure evolution, and transport behavior. We observed that PbGeSnTe3 crystallizes in a rhombohedral structure at room temperature with complex domain structures and transforms into a high-temperature cubic structure at â¼373 K. By alloying CdTe with PbGeSnTe3, the increased configurational entropy lowers the phase-transition temperature and stabilizes PbGeSnCdxTe3+x in the cubic structure at room temperature, and the domain structures vanish accordingly. The high-entropy effect results in increased atomic disorder and consequently a low lattice thermal conductivity of 0.76 W m-1 K-1 in the material owing to enhanced phonon scattering. Notably, the increased crystal symmetry is conducive to band convergence, which results in a high-power factor of 22.4 µW cm-1 K-1. As a collective consequence of these factors, a maximum ZT of 1.63 at 875 K and an average ZT of 1.02 in the temperature range of 300-875 K were obtained for PbGeSnCd0.08Te3.08. This study highlights that the high-entropy effect can induce a complex microstructure and band structure evolution in materials, which offers a new route for the search for high-performance thermoelectrics in entropy-engineered materials.
RESUMEN
The class I-III-VI2 diamondoid compounds with tetrahedral bonding are important semiconductors widely applied in optoelectronics. Understanding their heat transport properties and developing an effective method to predict the diamondoid solid solutions' thermal conductivity will help assess their impact as thermoelectrics. In this work, we investigated in detail the heat transport properties of CuGa1-xInxTe2 and Cu1-xAgxGaTe2 and found that in the Ag-alloyed solid solutions, the Ag atom off-centering effect results in crystallographic distortion and extra strong acoustic-optical phonon scattering and an extremely low lattice thermal conductivity. Moreover, we integrate the alloy scattering and the off-centering effect with the crystallographic distortion parameter to develop a modified Klemens model that predicts the thermal conductivity of diamondoid solid solutions. Finally, we demonstrate that Cu1-xAgxGaTe2 solid solutions are promising p-type thermoelectric materials, with a maximum ZT of 1.23 at 850 K for Cu0.58Ag0.4GaTe2.
RESUMEN
Carrier transport engineering in bulk semiconductors using inclusion phases often results in the deterioration of carrier mobility (µ) owing to enhanced carrier scattering at phase boundaries. Here, we show by leveraging the temperature-induced structural transition between the α-Cu2Se and ß-Cu2Se polymorphs that the incorporation of Cu4TiSe4 inclusions within the Cu2Se matrix results in a gradual large drop in the carrier mobility at temperatures below 400 K (α-Cu2Se), whereas the carrier mobility remains unchanged at higher temperatures, where the ß-Cu2Se polymorph dominates. The sharp discrepancy in the electronic transport within the α-Cu2Se and ß-Cu2Se matrices is associated with the formation of incoherent α-Cu2Se/Cu4TiSe4 interfaces, owing to the difference in their atomic structures and lattice parameters, which results in enhanced carrier scattering. In contrast, the similarity of the Se sublattices between ß-Cu2Se and Cu4TiSe4 gives rise to coherent phase boundaries and good band alignment, which promote carrier transport across the interfaces. Interestingly, the different cation arrangements in Cu4TiSe4 and ß-Cu2Se contribute to enhanced phonon scattering at the interfaces, which leads to a reduction in the lattice thermal conductivity. The large reduction in the total thermal conductivity while preserving the high power factor of ß-Cu2Se in the (1-x)Cu2Se/(x)Cu4TiSe4 composites results in an improved ZT of 1.2 at 850 K, with an average ZT of 0.84 (500-850 K) for the composite with x = 0.01. This work highlights the importance of structural similarity between the matrix and inclusions when designing thermoelectric materials with improved energy conversion efficiency.
RESUMEN
The ability to control the relative density of electronic point defects as well as their energy distribution in semiconductors could afford a systematic modulation of their electronic, optical, and optoelectronic properties. Using a model binary hybrid system Cu2Se-CuInSe2, we have investigated the correlation between phase composition, microstructure, and electronic transport behavior in the synthesized composites. We found that both Cu2Se and CuInSe2 phases coexist at multiple length scales, ranging from sub-ten nanometer to several micrometers, leading to the formation of a hybrid hierarchical microstructure. Astonishingly, the electronic phase diagram of the (1 - x)Cu2Se-(x)CuInSe2 (15% ≤ x ≤ 100%) hierarchical composites remarkably deviates from the trend normally expected for composites between a heavily doped semiconductor (Cu2Se) and a poorly conducting phase (CuInSe2). A sudden 3-fold increase in the electrical conductivity and carrier concentration along with a marginal increase in the carrier mobility is observed for composites at the vicinity of equimolar composition (48% ≤ x ≤ 52%). The carrier concentration increases from â¼1.5 × 1020 cm-3 for the composites with x ≤ 45% to 5.0 × 1020 cm-3 for x = 50%, and remains constant at 4.5 × 1020 cm-3 with x value in the range of 52% < x ≤ 90%, then quickly drops to 8 × 1018 cm-3 for pristine CuInSe2 phase (x = 100%). The atypical electronic behavior was rationalized in the light of the formation of an inter-band (IB) within the band gap, which arises from the hybridization of native electronic point defects from both Cu2Se and CuInSe2 phases in the resulting hierarchical composites. The result points to a new strategy to modulate the electronic structure of semiconductor composites to maximize interaction and coupling between two fundamentally contrasting properties enabling access to electronic hybrid systems with potential applications as interactive and stimuli-responsive multifunctional materials.
RESUMEN
The understanding of thermoelectric properties of ternary I-III-VI2 type (I = Cu, Ag; III = Ga, In; and VI = Te) chalcopyrites is less well developed. Although their thermal transport properties are relatively well studied, the relationship between the electronic band structure and charge transport properties of chalcopyrites has been rarely discussed. In this study, we reveal the unusual electronic band structure and the dynamic doping effect that could underpin the promising thermoelectric properties of Cu1-xAgxGaTe2 compounds. Density functional theory (DFT) calculations and electronic transport measurements suggest that the Cu1-xAgxGaTe2 compounds possess an unusual non-parabolic band structure, which is important for obtaining a high Seebeck coefficient. Moreover, a mid-gap impurity level was also observed in Cu1-xAgxGaTe2, which leads to a strong temperature-dependent carrier concentration and is able to regulate the carrier density at the optimized value for a wide temperature region and thus is beneficial to obtaining the high power factor and high average ZT of Cu1-xAgxGaTe2 compounds. We also demonstrate a great improvement in the thermoelectric performance of Cu1-xAgxGaTe2 by introducing Cu vacancies and ZnTe alloying. The Cu vacancies are effective in increasing the hole density and the electrical conductivity, while ZnTe alloying reduces the thermal conductivity. As a result, a maximum ZT of 1.43 at 850 K and a record-high average ZT of 0.81 for the Cu0.68Ag0.3GaTe2-0.5%ZnTe compound are achieved.
RESUMEN
The monoclinic α-Cu2Se phase is the first multipolar antiferroelectric semiconductor identified recently by electron microscopy. As a semiconductor, although there are no delocalized electrons to form a static macroscopic polarization, a spontaneous and localized antiferroelectric polarization was found along multiple directions. In conventional ferroelectrics, the polarity can be switched by an applied electric field, and a ferroelectric to paraelectric transition can be modulated by temperature. Here, we show that a reversible and robust antiferroelectric to paraelectric switching in a Cu2Se semiconductor can be tuned electrically by low-voltage and high-frequency electric pulses, and the structural transformations are imaged directly by transmission electron microscopy (TEM). The atomic mechanism of the transformation was assigned to an electrically triggered cation rearrangement with a low-energy barrier. Due to differences of the antiferroelectric and paraelectric phases regarding their electrical, mechanical, and optical properties, such an electrically tunable transformation has a great potential in various applications in microelectronics.
RESUMEN
Converting waste heat into useful electricity using solid-state thermoelectrics has a potential for enormous global energy savings. Lead chalcogenides are among the most prominent thermoelectric materials, whose performance decreases with an increase in chalcogen amounts (e.g., PbTe > PbSe > PbS). Herein, we demonstrate the simultaneous optimization of the electrical and thermal transport properties of PbS-based compounds by alloying with GeS. The addition of GeS triggers a complex cascade of beneficial events as follows: Ge2+ substitution in Pb2+ and discordant off-center behavior; formation of Pb5Ge5S12 as stable second-phase inclusions through valence disproportionation of Ge2+ to Ge0 and Ge4+. PbS and Pb5Ge5S12 exhibit good conduction band energy alignment that preserves the high electron mobility; the formation of Pb5Ge5S12 increases the electron carrier concentration by introducing S vacancies. Sb doping as the electron donor produces a large power factor and low lattice thermal conductivity (κlat) of â¼0.61 W m-1 K-1. The highest performance was obtained for the 14% GeS-alloyed samples, which exhibited an increased room-temperature electron mobility of â¼121 cm2 V-1 s-1 for 3 × 1019 cm-3 carrier density and a ZT of 1.32 at 923 K. This is â¼55% greater than the corresponding Sb-doped PbS sample and is one of the highest reported for the n-type PbS system. Moreover, the average ZT (ZTavg) of â¼0.76 from 400 to 923 K is the highest for PbS-based systems.
RESUMEN
Electric field-induced changes in the electrical resistance of a material are considered essential and enabling processes for future efficient large-scale computations. However, the underlying physical mechanisms of electroresistance are currently remain largely unknown. Herein, an electrically reversible resistance change has been observed in the thermoelectric α-Cu2Se. The spontaneous electric dipoles formed by Cu+ ions displaced from their positions at the centers of Se-tetrahedrons in the ordered α-Cu2Se phase are examined, and α-Cu2Se phase is identified to be a multipolar antiferroelectric semiconductor. When exposed to the applied voltage, a reversible switching of crystalline domains aligned parallel to the polar axis results in an observed reversible resistance change. The study expands on opportunities for semiconductors with localized polar symmetry as the hardware basis for future computational architectures.
RESUMEN
We report the observation of an anomalous nonlinear optical response of the prototypical three-dimensional topological insulator bismuth selenide through the process of high-order harmonic generation. We find that the generation efficiency increases as the laser polarization is changed from linear to elliptical, and it becomes maximum for circular polarization. With the aid of a microscopic theory and a detailed analysis of the measured spectra, we reveal that such anomalous enhancement encodes the characteristic topology of the band structure that originates from the interplay of strong spin-orbit coupling and time-reversal symmetry protection. The implications are in ultrafast probing of topological phase transitions, light-field driven dissipationless electronics, and quantum computation.
RESUMEN
Mobile ion-enabled phenomena make ß-Zn4Sb3 a promising material in terms of the re-entry phase instability behavior, mixed electronic ionic conduction, and thermoelectric performance. Here, we utilize the fast Zn2+ migration under a sawtooth waveform electric field and a dynamical growth of 3-dimensional ionic conduction network to achieve ultra-fast synthesis of ß-Zn4Sb3. Moreover, the interplay between the mobile ions, electric field, and temperature field gives rise to exquisite core-shell crystalline-amorphous microstructures that self-adaptively stabilize ß-Zn4Sb3. Doping Cd or Ge on the Zn site as steric hindrance further stabilizes ß-Zn4Sb3 by restricting long-range Zn2+ migration and extends the operation temperature range of high thermoelectric performance. These results provide insight into the development of mixed-conduction thermoelectric materials, batteries, and other functional materials.
RESUMEN
The entanglement of lattice thermal conductivity, electrical conductivity, and Seebeck coefficient complicates the process of optimizing thermoelectric performance in most thermoelectric materials. Semiconductors with ultralow lattice thermal conductivities and high power factors at the same time are scarce but fundamentally interesting and practically important for energy conversion. Herein, an intrinsic p-type semiconductor TlCuSe that has an intrinsically ultralow thermal conductivity (0.25 W m-1 K-1 ), a high power factor (11.6 µW cm-1 K-2 ), and a high figure of merit, ZT (1.9) at 643 K is described. The weak chemical bonds, originating from the filled antibonding orbitals p-d* within the edge-sharing CuSe4 tetrahedra and long TlSe bonds in the PbClF-type structure, in conjunction with the large atomic mass of Tl lead to an ultralow sound velocity. Strong anharmonicity, coming from Tl+ lone-pair electrons, boosts phonon-phonon scattering rates and further suppresses lattice thermal conductivity. The multiband character of the valence band structure contributing to power factor enhancement benefits from the lone-pair electrons of Tl+ as well, which modify the orbital character of the valence bands, and pushes the valence band maximum off the Γ-point, increasing the band degeneracy. The results provide new insight on the rational design of thermoelectric materials.
RESUMEN
Owing to the diversity of composition and excellent transport properties, the ternary I-III-VI2 type diamond-like chalcopyrite compounds are attractive functional semiconductors, including as thermoelectric materials. In this family, CuInTe2 and CuGaTe2 are well investigated and achieve maximum ZT values of â¼1.4 at 950 K and an average ZT of 0.43. However, both compounds have poor electrical conductivity at low temperature, resulting in low ZT below 450 K. In this work, we have greatly improved the thermoelectric performance in the quinary diamondoid compound (Cu0.8Ag0.2)(In0.2Ga0.8)Te2 by understanding and controlling the effects of different constituent elements on the thermoelectric transport properties. Our combined theoretical and experimental effort indicates that Ga in the In site of the lattice decreases the carrier effective mass and improves the electrical conductivity and power factor of Cu0.8Ag0.2In1-xGaxTe2. Furthermore, Ag in the Cu site strongly suppresses the heat transport via the enhanced acoustic phonon-optical phonon coupling effects, leading to the ultralow thermal conductivity of â¼0.49 W m-1 K-1 at 850 K in Cu0.8Ag0.2In0.2Ga0.8Te2. Defect formation energy calculations suggest intrinsic Cu vacancies introduce defect levels that are important to the temperature-dependent hole density and electrical conductivity. Therefore, we introduced extra Cu vacancies to optimize the hole carrier density and improve the power factor of Cu0.8Ag0.2In0.2Ga0.8Te2. As a result, a maximum ZT of â¼1.5 at 850 K and an average ZT of 0.78 in the temperature range of 400-850 K are obtained, which is among the highest in the diamond-like compound family.
RESUMEN
The manipulation of individual intrinsic point defects is crucial for boosting the thermoelectric performances of n-Bi2Te3-based thermoelectric films, but was not achieved in previous studies. In this work, we realize the independent manipulation of Te vacancies VTe and antisite defects of TeBi and BiTe in molecular beam epitaxially grown n-Bi2Te3 films, which is directly monitored by a scanning tunneling microscope. By virtue of introducing dominant TeBi antisites, the n-Bi2Te3 film can achieve the state-of-the-art thermoelectric power factor of 5.05 mW m-1 K-2, significantly superior to films containing VTe and BiTe as dominant defects. Angle-resolved photoemission spectroscopy and systematic transport studies have revealed two detrimental effects regarding VTe and BiTe, which have not been discovered before: (1) The presence of BiTe antisites leads to a reduction of the carrier effective mass in the conduction band; and (2) the intrinsic transformation of VTe to BiTe during the film growth results in a built-in electric field along the film thickness direction and thus is not beneficial for the carrier mobility. This research is instructive for further engineering defects and optimizing electronic transport properties of n-Bi2Te3 and other technologically important thermoelectric materials.
RESUMEN
We present an effective approach to favorably modify the electronic structure of PbSe using Ag doping coupled with SrSe or BaSe alloying. The Agâ 4d states make a contribution to in the top of the heavy hole valence band and raise its energy. The Sr and Ba atoms diminish the contribution of Pbâ 6s2 states and decrease the energy of the light hole valence band. This electronic structure modification increases the density-of-states effective mass, and strongly enhances the thermoelectric performance. Moreover, the Ag-rich nanoscale precipitates, discordant Ag atoms, and Pb/Sr, Pb/Ba point defects in the PbSe matrix work together to reduce the lattice thermal conductivity, resulting a record high average ZTavg of around 0.86 over 400-923â K.
RESUMEN
Atomic-scale incorporation of CuAlSe2 inclusions within the Cu2Se matrix, achieved through a solid-state transformation of CuSe2 template precursor using elemental Cu and Al, enables a unique temperature-dependent dynamic doping of the Cu2Se matrix. The CuAlSe2 inclusions, due to their ability to accommodate a large fraction of excess metal atoms within their crystal lattice, serve as a "reservoir" for Cu ions diffusing away from the Cu2Se matrix. Such unidirectional diffusion of Cu ions from the Cu2Se matrix to the CuAlSe2 inclusion leads to the formation, near the CuAlSe2/Cu2Se interface, of a high density of Cu-deficient ß-Cu2-δSe nanoparticles within the α-Cu2Se matrix and the formation of Cu-rich Cu1+yAlSe2 nanoparticles with the CuAlSe2 inclusions. This gives rise to a large enhancement in carrier concentration and electrical conductivity at elevated temperatures. Furthermore, the nanostructuring near the CuAlSe2/Cu2Se interface, as well as the extensive atomic disorder in the Cu2Se and CuAlSe2 phases, significantly increases phonon scattering, leading to suppressed lattice thermal conductivity. Consequently, a significant improvement in ZT is observed for selected Cu2Se/CuAlSe2 composites. This work demonstrates the use of in situ-formed interactive secondary phases in a semiconducting matrix as an elegant alternative approach for further improvement of the performance of leading thermoelectric materials.
RESUMEN
Designing crystalline solids in which intrinsically and extremely low lattice thermal conductivity mainly arises from their unique bonding nature rather than structure complexity and/or atomic disorder could promote thermal energy manipulation and utilization for applications ranging from thermoelectric energy conversion to thermal barrier coatings. Here, we report an extremely low lattice thermal conductivity of â¼0.34 W m-1 K-1 at 300 K in the new complex sulfosalt MnPb16Sb14S38. We attribute the ultralow lattice thermal conductivity to a synergistic combination of scattering mechanisms involving (1) strong bond anharmonicity in various structural building units, owing to the presence of stereoactive lone-electron-pair (LEP) micelles and (2) phonon scattering at the interfaces between building units of increasing size and complexity. Remarkably, low-temperature heat capacity measurement revealed a Cp value of 0.206 J g-1 K-1 at T > 300 K, which is 22% lower than the Dulong-Petit value (0.274 J g-1 K-1). Further analysis of the Cp data and sound velocity (ν = 1834 m s-1) measurement yielded Debye temperature values of 161 and 187 K, respectively. The resulting Grüneisen parameter, γ = 1.65, further supports strong bond anharmonicity as the dominant mechanism responsible for the observed extremely low lattice thermal conductivity.
RESUMEN
The applications of mixed ionic-electronic conductors are limited due to phase instability under a high direct current and large temperature difference. Here, it is shown that Cu2 Se is stabilized through regulating the behaviors of Cu+ ions and electrons in a Schottky heterojunction between the Cu2 Se host matrix and in-situ-formed BiCuSeO nanoparticles. The accumulation of Cu+ ions via an ionic capacitive effect at the Schottky junction under the direct current modifies the space-charge distribution in the electric double layer, which blocks the long-range migration of Cu+ and produces a drastic reduction of Cu+ ion migration by nearly two orders of magnitude. Moreover, this heterojunction impedes electrons transferring from BiCuSeO to Cu2 Se, obstructing the reduction reaction of Cu+ into Cu metal at the interface and hence stabilizes the ß-Cu2 Se phase. Furthermore, incorporation of BiCuSeO in Cu2 Se optimizes the carrier concentration and intensifies phonon scattering, contributing to the peak figure of merit ZT value of ≈2.7 at 973 K and high average ZT value of ≈1.5 between 400 and 973 K for the Cu2 Se/BiCuSeO composites. This discovery provides a new avenue for stabilizing mixed ionic-electronic conduction thermoelectrics, and gives fresh insights into controlling ion migration in these ionic-transport-dominated materials.
RESUMEN
Defect chemistry is critical to designing high performance thermoelectric materials. In SnTe, the naturally large density of cation vacancies results in excessive hole doping and frustrates the ability to control the thermoelectric properties. Yet, recent work also associates the vacancies with suppressed sound velocities and low lattice thermal conductivity, underscoring the need to understand the interplay between alloying, vacancies, and the transport properties of SnTe. Here, we report solid solutions of SnTe with NaSbTe2 and NaBiTe2 (NaSnmSbTem+2 and NaSnmBiTem+2, respectively) and focus on the impact of the ternary alloys on the cation vacancies and thermoelectric properties. We find introduction of NaSbTe2, but not NaBiTe2, into SnTe nearly doubles the natural concentration of Sn vacancies. Furthermore, DFT calculations suggest that both NaSbTe2 and NaBiTe2 facilitate valence band convergence and simultaneously narrow the band gap. These effects improve the power factors but also make the alloys more prone to detrimental bipolar diffusion. Indeed, the performance of NaSnmBiTem+2 is limited by strong bipolar transport and only exhibits modest maximum ZTs ≈ 0.85 at 900 K. In NaSnmSbTem+2 however, the doubled vacancy concentration raises the charge carrier density and suppresses bipolar diffusion, resulting in superior power factors than those of the Bi-containing analogues. Lastly, NaSbTe2 incorporation lowers the sound velocity of SnTe to give glasslike lattice thermal conductivities. Facilitated by the favorable impacts of band convergence, vacancy-augmented hole concentration, and lattice softening, NaSnmSbTem+2 reaches high ZT ≈ 1.2 at 800-900 K and a competitive average ZTavg of 0.7 over 300-873 K. The difference in ZT between two chemically similar compounds underscores the importance of intrinsic defects in engineering high-performance thermoelectrics.
RESUMEN
Crystal polymorphism selection during synthesis is extremely challenging. However, promoting the formation of a specific metastable polymorph enables modulation of the functional properties of phase-change materials through alteration of the relative abundance of various polymorphs. Here, we demonstrate the stabilization of the superionic ß-Cu2Se phase under ambient conditions and the direct control over the relative ratio between the α-Cu2Se and ß-Cu2Se polymorphs in (x)CuGaSe2/(1-x)Cu2Se composites using CuGaSe2 nanoseeds. We found that the small lattice mismatch between ß-Cu2Se (cubic) and the ab plane of tetragonal CuGaSe2 nanoseeds promotes the formation of low-energy coherent CuGaSe2/ß-Cu2Se interfaces, leading to preferential stabilization of ß-Cu2Se. Astonishingly, the hierarchical microstructure of the resulting composites enables a remarkable decoupling of charge and heat transport, which is manifested by a breakdown of the Wiedemann-Franz law.