Tetragonal CoMn2O4 nanocrystals on electrospun carbon fibers as high-performance battery-type supercapacitor electrode materials.

We herein report a simple two-step procedure for fabricating tetragonal CoMn2O4 spinel nanocrystals on carbon fibers. The battery-type behavior of these composite fibers arises from the redox activity of CoMn2O4 in an alkaline aqueous solution, which, in combination with the carbon fibers, endows good electrochemical performance and long-term stability. The C@CoMn2O4 electrode exhibited high specific capacity, up to 62 mA h g-1 at 1 A g-1 with a capacity retention of around 90% after 4000 cycles. A symmetrical coin-cell device assembled with the composite electrodes delivered a high energy density of 7.3 W h kg-1 at a power density of 0.1 kW kg-1, which is around 13 times higher than that of bare carbon electrodes. The coin cell was cycled for 5000 cycles with 96.3% capacitance retention, at a voltage of up to 0.8 V, demonstrating excellent cycling stability.

Preparation and modeling of three-layered PCL/PLGA/PCL fibrous scaffolds for prolonged drug release.

The authors present the preparation procedure and a computational model of a three-layered fibrous scaffold for prolonged drug release. The scaffold, produced by emulsion/sequential electrospinning, consists of a poly(D,L-lactic-co-glycolic acid) (PLGA) fiber layer sandwiched between two poly(ε-caprolactone) (PCL) layers. Experimental results of drug release rates from the scaffold are compared with the results of the recently introduced computational finite element (FE) models for diffusive drug release from nanofibers to the three-dimensional (3D) surrounding medium. Two different FE models are used: (1) a 3D discretized continuum and fibers represented by a simple radial one-dimensional (1D) finite elements, and (2) a 3D continuum discretized by composite smeared finite elements (CSFEs) containing the fiber smeared and surrounding domains. Both models include the effects of polymer degradation and hydrophobicity (as partitioning) of the drug at the fiber/surrounding interface. The CSFE model includes a volumetric fraction of fibers and diameter distribution, and is additionally enhanced by using correction function to improve the accuracy of the model. The computational results are validated on Rhodamine B (fluorescent drug l) and other hydrophilic drugs. Agreement with experimental results proves that numerical models can serve as efficient tools for drug release to the surrounding porous medium or biological tissue. It is demonstrated that the introduced three-layered scaffold delays the drug release process and can be used for the time-controlled release of drugs in postoperative therapy.

Cefazolin-loaded polycaprolactone fibers produced via different electrospinning methods: Characterization, drug release and antibacterial effect.

Antibiotic containing polycaprolactone (PCL) fibers were produced by using three electrospinning methods: blend, emulsion and co-axial electrospinning (labeled as S1, S2 and S3, respectively). The profiles of drug release from three different systems were studied and antimicrobial properties of produced materials were evaluated. Morphology of the produced fibers was characterized and revealed that cefazolin-loaded PCL fibers had smaller diameter compared to neat PCL fibers, while the chemical interaction between the antibiotic and PCL showed that cefazolin neither had reacted with PCL phase, nor had degraded during the electrospinning process. The crystallinity and thermal characterization of fabricated fibers showed that the addition of cefazolin decreased the crystallinity of PCL. The results of the drug release behavior of the blend and co-axial electrospun fibers was on a higher level (~68% and ~43%, respectively) compared to the emulsion electrospun fibers (~5%), after a period of 30 days. The obtained data had the best fitting with the first order model and the Higuchi model, while the Korsmeyer-Peppas model showed a Pseudo-Fickian diffusion of the drug. Antibacterial evaluations showed that cefazolin-loaded PCL fibers had better effects on Staphylococcus aureus compared to Escherichia coli during the treatment period and that the effect of the emulsion fibers was notably weaker than the other two studied systems. The aim of the study was to test different systems for control drug release of different dynamics, which will be applied for prevent bacterial accumulation when indwelling urinary catheters, applied for different periods of time.

Predictive modeling of the mechanical properties of particulate hydroxyapatite reinforced polymer composites.

The influence of particle geometry and volume fraction on the mechanical properties of a hydroxyapatite (HAp) particulate reinforced polymer (poly-L-lactide and collagen) matrix composite was investigated through finite-element (FE) analysis. For cube-shaped (near sharp and curved corners and edges) embedded particles, it was found that the maximum stress concentration factor (SCF) in the matrix decreases with an increase of the HAp particle volume fraction (PVF). The maximum stress concentration in the matrix material containing a spherical inclusion has low sensitivity to the PVF. The compressive Young's modulus was found to be slightly dependent on particle shape, but very sensitive to PVF. Calculated stiffness values from FE analysis were compared to the experimental results available in the literature and with predictions from the Halpin-Tsai model.