Plastic waste management in recycling facilities: Intentionally generated MPs as an emerging contaminant.

There is little knowledge about microplastic (MP) pollution in plastic recycling facility (PRF) wastewater. In this study, MPs in the wastewaters of four PRFs located in Türkiye were characterized for size, shape, color, and polymer types after sieving from 5,000 µm to the lowest 75 µm with seven sieves. The wet peroxide oxidation procedure was applied before attenuated total reflectance fourier transform infrared spectroscopy analysis for polymer identification. Polyethylene, and polypropylene were the dominant (75 % of total count) MP types within 22 polymer types. Average hit qualities of polymers increased from 69 % to above 84 % for the device software (OPUS) and open software (OpenSpecy). The abundance of MPs was determined as 53,987 MPs/L and 0.8 g MP/L for mixed PRFs 7,582 MPs/L and 4.6 g/L for the LDPE recycling facility, and 2,196 MPs/L and 0.06 g MPs/L for the granulation cooling water by count and weight, respectively. Small-sized MPs are found in the bottom sample much more than the surface and effluent samples in the washing tank. This indicated that MPs adsorbed the pollutants settled in the washing tank due to adsorbed pollution/biofilm. A maximum of 4.6 kg MP/ton of plastic recycled can be discharged as MPs that can be recovered. Considering the plastics recycling capacity, discharged MPs in these PRFs are possibly above 30,000 tons.

Evaluation of ciprofloxacin (CIP) and clarithromycin (CLA) adsorption with weathered PVC microplastics.

The sorption kinetics of two of the most frequently used antibiotics onto recycled (weathered) polyvinyl chloride (PVC) was investigated, using Freundlich and Langmuir isotherm models. Various experimental conditions were set, including pH, contact time, rotational speed, temperature, and initial concentration. The batch experimental results indicated that Freundlich model was better fitted than Langmuir (R2: 98.7 and 84.7, for CIP and CLA respectively). Maximum adsorption capacity is 45.9 mg/g and 22.0 mg/g for CIP and CLA, respectively. Enthalpy (ΔH), and entropy (ΔS) values were negative for CIP, indicating that the reaction was exothermic and spontaneous, respectively. It was vice versa for CLA. Field emission scanning electron microscope (FESEM) and Fourier transform infrared spectrometer (FT-IR) analysis confirmed the physical adsorption mechanism. The results demonstrated that the recycled PVC microplastic has a good capacity for adsorption for both antibiotics.

A New Piperidine Derivatized-Schiff Base Based "Turn-on" Cu2+Chemo-Sensor.

In this study, we report the synthesis of new Schiff base E-1-(((1-benzylpiperidin-4-yl)imino)methyl)naphthalenee-2-ol (L) and evaluation of its fluorescence response toward Cu2+ ion. Preliminary, solvent effect, metal selectivity and metal ligand ratio were analyzed through UV-Visible study. Fluorescence response toward Cu2+ was carried to assess the fluorescent property of synthesized Schiff base. The probe exhibited a higher fluorescence enhancement in the presence of Cu2+ over other metal ions (Ni2+, Zn2+, Hg2+, Co2+, Cd2+, Al3+, Fe2+, and Pb2+). The binding stoichiometry between L and Cu2+ has been investigated using Job's plot and Benesi-Hildebrand equation and it was found that ligand L can form 1:1 L-Cu2+ complex with binding constant (K a) of 4 × 104 LM-1.

Melittin adsorption and lipid monolayer disruption at liquid-liquid interfaces.

Melittin, a membrane-active peptide with antimicrobial activity, was investigated at the interface formed between two immiscible electrolyte solutions (ITIES) supported on a metallic electrode. Ion-transfer voltammetry showed well-defined semi-reversible transfer peaks along with adsorptive peaks. The reversible adsorption of melittin at the liquid-liquid interface is qualitatively discussed from voltammetric data and experimentally confirmed by real-time image analysis of video snapshots. It is also demonstrated that polarization of the water/1,2-DCE interface results in drastic drop shape variations caused by large variations of the interfacial tension. The experimental data also confirmed that maximum adsorption occurs near the ion transfer potential. Finally, the interaction of melittin with a monolayer of L-α-dipalmitoyl phosphatidylcholine (DPPC) was also investigated showing that melittin destabilizes the lipidic monolayer facilitating its desorption. The non-covalent complex formation between melittin and DPPC was confirmed by mass spectrometry.