Performance evaluation and kinetic modeling of an upflow anaerobic sludge blanket septic tank for domestic wastewater treatment.

This work evaluated the UASB-septic tank performance using different kinetic models that correlated process efficiency and methane production with hydraulic and organic loading rates through experiments with five different HRT (48 h, 36 h, 24 h, 18 h, and 12 h) using synthetic domestic wastewater. The modified Stover-Kincannon model provided the best fitting to calculate kinetics constants, with an R2 above 98% for linear regression, and predicted the effluent COD more accurately than the other models. Methane yield was 0.3294 L CH4/g COD removed, being closer to the theoretical value, and the Van der Meer and Heertjes model had the highest R2 for methane production. Organic matter and solids removal were 45% for TS, 70% and 68% for total and soluble COD, and 85% for TSS. Pollutant removal markedly decreased when the reactor operated HRT below 24 h; thus, it is recommended to operate the UASB-septic tank at this HRT.

Analysis of the Physicochemical and Mineralogical Properties of the Materials Used in the Preparation of Recoblocks.

The construction sector generates 14,000 t/d of construction waste in Mexico City, these materials do not have real applications and end up accumulating in landfills. This work, the objective of which was to analyze the physicochemical and mineralogical properties of soil and construction waste used in the manufacture of Recoblocks, is divided in five stages. First, the excavation material was submitted to field tests. Physical and chemical tests were then carried out on construction waste. Subsequently, the optimal mixture for making Recoblocks was determined. Next, Recoblocks were evaluated and compared with blocks made with water only, without mucilage of Opuntia ficus, and finally a feasibility study was performed. The X-ray diffraction study showed the presence of plagioclase, minerals that improve bending resistance, hardness, durability, as well as resistance to stress in a material. Compared to blocks manufactured without mucilage, the use of Opuntia ficus mucilage increased the compressive strength of the material by 59%, as well as the erodibility. Recoblocks are an environmentally friendly option because they are based on recycled materials, dried under the sun, which eliminates the use of brick oven. The production cost per unit is just USD 0.19, so it is a viable option as a building material.

Efficiency of Opuntia ficus in the phytoremediation of a soil contaminated with used motor oil and lead, compared to that of Lolium perenne and Aloe barbadensis.

Industrial pollutants such as heavy metals and hydrocarbons in soils represent a serious concern due to their persistence and negative effects on the environment, affecting cellular processes in living organisms and even causing mutations and cancer. The main objectives of this work were to evaluate the efficiency of Opuntia ficus in the phytoremediation of a soil polluted with used motor oil. Two other species, one with different and one with similar characteristics, relatively, were used for comparison purposes: Lolium perenne and Aloe barbadensis. The effect of the plants on lead solubility and bioaccumulation, the biomass production of each specie and the microbial counts and bacterial identification for each experiment was studied. Total petroleum hydrocarbons (TPH) were measured every 5 weeks throughout the 20-week phytoremediation experiment. At the end of the experiment soluble Pb, Pb extracted by the plant species, microbiological counts, total biomass and bacterial species in soil were analyzed. Even though Lolium perenne showed the highest TPH removal (47%), Opuntia ficus produced the highest biomass and similar removal (46%). Since Opuntia ficus requires low amounts of water and grows fast, it would be a suitable option in the remediation of soils polluted with hydrocarbons and/or heavy metals.

Exploration of the ability of Coleus blumei to accumulate aluminum.

In this study, the capacity of an ornamental species (Coleus blumei) to extract and accumulate aluminum was evaluated. The analyzed parameters were amount of soluble aluminum, radical growth, tolerance rate, bioaccumulation factor, and tissues aluminum concentration. The main limiting factor for aluminum accumulation is the availability of the metal. However, Coleus blumei can grow and accumulate up to 1445.7 mg kg(-1) of aluminum dry base. This plant can play an important role in the treatment of polluted water with metals, since it can grow in conditions with a pH of around 4.8. The aluminum tolerance rate showed for this plant ranged between 18.8% and 25%. Therefore, this species behaves as a non-accumulator, even though the bioaccumulation factor was 3098.5 L kg(-1).