SPINE workshop on automated X-ray analysis: a progress report.

The Structural Proteomics In Europe (SPINE) consortium contained a workpackage to address the automated X-ray analysis of macromolecules. The aim of this workpackage was to increase the throughput of three-dimensional structures while maintaining the high quality of conventional analyses. SPINE was able to bring together developers of software with users from the partner laboratories. Here, the results of a workshop organized by the consortium to evaluate software developed in the member laboratories against a set of bacterial targets are described. The major emphasis was on molecular-replacement suites, where automation was most advanced. Data processing and analysis, use of experimental phases and model construction were also addressed, albeit at a lower level.

Spherically averaged phased translation function and its application to the search for molecules and fragments in electron-density maps.

The molecular-replacement method has been extended to locate molecules and their fragments in an electron-density map. The approach is based on a new spherically averaged phased translation function. The position of the centre of mass of a search model is found prior to determination of its orientation. The orientation is subsequently found by a phased rotation function. The technique also allows superposition of distantly related macromolecules. The method has been implemented in a computer program MOLREP and successfully tested using experimental data sets.

Comparison of the decameric structure of peroxiredoxin-II by transmission electron microscopy and X-ray crystallography.

The decameric human erythrocyte protein torin is identical to the thiol-specific antioxidant protein-II (TSA-II), also termed peroxiredoxin-II (Prx-II). Single particle analysis from electron micrographs of Prx-II molecules homogeneously orientated across holes in the presence of a thin film of ammonium molybdate and trehalose has facilitated the production of a >/=20 A 3-D reconstruction by angular reconstitution that emphasises the D5 symmetry of the ring-like decamer. The X-ray structure for Prx-II was fitted into the transmission electron microscopic reconstruction by molecular replacement. The surface-rendered transmission electron microscopy (TEM) reconstruction correlates well with the solvent-excluded surface of the X-ray structure of the Prx-II molecule. This provides confirmation that transmission electron microscopy of negatively stained specimens, despite limited resolution, has the potential to reveal a valid representation of surface features of protein molecules. 2-D crystallisation of the Prx-II protein on mica as part of a TEM study resulted in the formation of a p2 crystal form with parallel linear arrays of stacked rings. This latter 2-D form correlates well with that observed from the 2.7 A X-ray structure of Prx-II solved from a new orthorhombic 3-D crystal form.

Crystal structure of decameric 2-Cys peroxiredoxin from human erythrocytes at 1.7 A resolution.

BACKGROUND: The peroxiredoxins (Prxs) are an emerging family of multifunctional enzymes that exhibit peroxidase activity in vitro, and in vivo participate in a range of cellular processes known to be sensitive to reactive oxygen species. Thioredoxin peroxidase B (TPx-B), a 2-Cys type II Prx from erythrocytes, promotes potassium efflux and down-regulates apoptosis and the recruitment of monocytes by endothelial tissue. RESULTS: The crystal structure of human decameric TPx-B purified from erythrocytes has been determined to 1.7 [corrected)] A resolution. The structure is a toroid comprising five dimers linked end-on through predominantly hydrophobic interactions, and is proposed to represent an intermediate in the in vivo reaction cycle. In the crystal structure, Cys51, the site of peroxide reduction, is oxidised to cysteine sulphinic acid. The residue Cys172, lies approximately 10 A away from Cys51 [corrected]. CONCLUSIONS: The oxidation of Cys51 appears to have trapped the structure into a stable decamer, as confirmed by sedimentation analysis. A comparison with two previously reported dimeric Prx structures reveals that the catalytic cycle of 2-Cys Prx requires significant conformational changes that include the unwinding of the active-site helix and the movement of four loops. It is proposed that the stable decamer forms in vivo under conditions of oxidative stress. Similar decameric structures of TPx-B have been observed by electron microscopy, which show the protein associated with the erythrocyte membrane.

Automated production of small-molecule dictionaries for use in crystallographic refinements.

Many macromolecules are now being studied crystallographically in complexes with a range of ligands and other associated molecules. It is necessary to have templates describing the expected geometry of such molecules before refinement and model building can be carried out. This paper describes a method for generating templates beginning from the SMILES description of the molecule, the final format of the molecular template being based on the mmCIF definitions for chemical composition. Additionally, the program SMILE2DICT, which converts the SMILES string to a more extended format, is described. The description details the input required, the output produced and how the program relates to attempts to automate the procedure of model building for crystallographic refinement. Examples of input to and output from the program are given.

Efficient anisotropic refinement of macromolecular structures using FFT.

This paper gives the equations for the use of fast Fourier transformations in individual atomic anisotropic refinement. Restraints on bonded atoms, on the sphericity of each atom and between non-crystallographic symmetry related atoms are described. These have been implemented in the program REFMAC and its performance with several examples is analysed. All the tests show that anisotropic refinement not only reduces the R value and Rfree but also improves the fit to geometric targets, indicating that this parameterization is valuable for improving models derived from experimental data. The computer time taken is comparable to that for isotropic refinements.

Refinement of macromolecular structures by the maximum-likelihood method.

This paper reviews the mathematical basis of maximum likelihood. The likelihood function for macromolecular structures is extended to include prior phase information and experimental standard uncertainties. The assumption that different parts of a structure might have different errors is considered. A method for estimating sigma(A) using 'free' reflections is described and its effects analysed. The derived equations have been implemented in the program REFMAC. This has been tested on several proteins at different stages of refinement (bacterial alpha-amylase, cytochrome c', cross-linked insulin and oligopeptide binding protein). The results derived using the maximum-likelihood residual are consistently better than those obtained from least-squares refinement.

Three-dimensional structure of catalase from Micrococcus lysodeikticus at 1.5 A resolution.

The three-dimensional crystal structure of catalase from Micrococcus lysodeikticus has been solved by multiple isomorphous replacement and refined at 1.5 A resolution. The subunit of the tetrameric molecule of 222 symmetry consists of a single polypeptide chain of about 500 amino acid residues and one haem group. The crystals belong to space group P4(2)2(1)2 with unit cell parameters a = b = 106.7 A, c = 106.3 A, and there is one subunit of the tetramer per asymmetric unit. The amino acid sequence has been tentatively determined by computer graphics model building and comparison with the known three-dimensional structure of beef liver catalase and sequences of several other catalases. The atomic model has been refined by Hendrickson and Konnert's least-squares minimisation against 94,315 reflections between 8 A and 1.5 A. The final model consists of 3,977 non-hydrogen atoms of the protein and haem group, 426 water molecules and one sulphate ion. The secondary and tertiary structures of the bacterial catalase have been analyzed and a comparison with the structure of beef liver catalase has been made.

Comparison of structures of dry and wet hen egg-white lysozyme molecule at 1.8 A resolution.

A high resolution structure of hen egg-white lysozyme containing 36 +/- 1 mol H2O per mol of protein has been obtained using triclinic (P1) crystals cross-linked with glutaraldehyde. Analysis of dehydration-induced structural changes has revealed displacement in relative position of domains and numerous small displacements in positions of individual atoms with r.m.s. deviation of main atoms 0.60 A, and that of all atoms 0.97 A. An increase in the average packing density of atoms in dry lysozyme by 4-6% seems to be the most probable reason for the loss of its activity and mobility.

[Localization of active sites in human ceruloplasmin from data of intra- and intermolecular homology]. / Lokalizatsiia aktivnykh tsentrov v tseruloplazmine cheloveka po dannym vnutri- i mezhmolekuliarnoi gomologii.

The identification of possible copper ligands in human ceruloplasmin was carried out by the computer similarity analysis for sequences of ceruloplasmin and several other copper oxidases: azurin, plastocyanin, superoxide dismutase, tyrosinase and hemocyanin. It follows from the analysis of inter- and intramolecular homology that copper active sites of different types appeared to be in close contacts within the ceruloplasmin molecule.

[The length of DNA determines the degree of regularity of crystals of the cro-repressor complex]. / Dlina DNK opredeliaet stepen' uporiadochennosti kristallov kompleksa s cro-repressorom.

The DNA-cro-repressor complex crystals have been obtained, five DNA fragments of the same nucleotide sequence and different length being used. The rotation function for crystals of complexes with hexamer (pGpT)3 . (pApC)3 and with octamer (pGpT)3 . (pApC)3 have been calculated. The order of cro-DNA complex crystals is shown to vary with DNA length, the crystal of the complex with octamer being the most perfect among all investigated complexes.

Three-dimensional structure of catalase from Penicillium vitale at 2.0 A resolution.

The three-dimensional structure analysis of crystalline fungal catalase from Penicillium vitale has been extended to 2.0 A resolution. The crystals belong to space group P3(1)21, with the unit cell parameters of a = b = 144.4 A and c = 133.8 A. The asymmetric unit contains half a tetrameric molecule of 222 symmetry. Each subunit is a single polypeptide chain of approximately 670 amino acid residues and binds one heme group. The amino acid sequence has been tentatively determined by computer graphics model building (using the FRODO system) and comparison with the known sequence of beef liver catalase. The atomic model has been refined by the Hendrickson & Konnert (1981) restrained least-squares program against 68,000 reflections between 5 A and 2 A resolution. The final R-factor is 0.31 after 24 refinement cycles. The secondary and tertiary structure of the catalase has been analyzed.

Comparison of beef liver and Penicillium vitale catalases.

The structures of Penicillium vitale and beef liver catalase have been determined to atomic resolution. Both catalases are tetrameric proteins with deeply buried heme groups. The amino acid sequence of beef liver catalase is known and contains (at least) 506 amino acid residues. Although the sequence of P. vitale catalase has not yet been determined chemically, 670 residues have been built into the 2 A resolution electron density map and have been given tentative assignments. A large portion of each catalase molecule (91% of residues in beef liver catalase and 68% of residues in P. vitale catalase) shows structural homology. The root-mean-square deviation between 458 equivalenced C alpha atoms is 1.17 A. The dissimilar parts include a small fragment of the N-terminal arm and an additional "flavodoxin-like" domain at the carboxy end of the polypeptide chain of P. vitale catalase. In contrast, beef liver catalase contains one bound NADP molecule per subunit in a position equivalent to the chain region, leading to the flavodoxin-like domain, of P. vitale catalase. The position and orientation of the buried heme group in the two catalases, relative to the mutually perpendicular molecular dyad axes, are identical within experimental error. A mostly hydrophobic channel leads to the buried heme group. The surface opening to the channel differs due to the different disposition of the amino-terminal arm and the presence of the additional flavodoxin-like domain in P. vitale catalase. Possible functional implications of these comparisons are discussed.