Design and Characterization of an Osmotic Pump System for Optimal Feeding and pH Control in E. coli Culture to Increase Biomass.

Background: Batch cultures used for various purposes, such as expression screening and recombinant protein production in laboratories, usually have some drawbacks due to the bolus addition of carbon sources, such as glucose and buffers, that lead to overflow metabolism, decreased pH, high osmolality, low biomass yield, and low protein production. Objectives: This study aimed to overcome the problems of batch culture using the controlled release concept by a controlled porosity osmotic pump (CPOP) system. Methods: The CPOP was formulated with glucose as a carbon source feeding and sodium carbonate as a pH modifier in the core of the tablet that was coated with a semipermeable membrane containing cellulose acetate and polyethylene glycol (PEG) 400. The release rate was regulated with Eudragit L100 as a retardant agent in the core and PEG 400 as a pore-former agent in the coating membrane. Fourier-transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM) were used to elucidate compatibility between components and release mechanism, respectively. The in-vitro release of glucose and Na2CO3 studies were performed for 24 hours in a mineral culture medium (M9). Then, the effectiveness of CPOP in the growth of Escherichia coli (E. coli BL21) as a microorganism model was evaluated. Glucose consumption, changes in medium's pH, and acetate concentration as a by-product were also monitored during the bacterial growth. Results: Fourier-transform infrared spectroscopy confirmed the compatibility between the components in the osmotic pump, and SEM elucidated the release mechanism due to in-situ delivery pores created by dissolving soluble components (PEG 400) on the coated membrane upon contact with the dissolution medium. The in-vitro release studies indicated that the osmotic pump was able to deliver glucose and sodium carbonate in a zero-order manner. The use of CPOP in E. coli (BL21) cultivation resulted in a statistically significant improvement in biomass (over 80%), maintaining the pH of the medium (above 6.8) during the exponential phase, and reducing metabolic by-product formation (acetate), compared to bolus feeding (P < 0.05). Conclusions: The use of CPOP, which is capable of controlled release of glucose as a carbon source and sodium carbonate as a pH modifier, can overcome the drawbacks of bolus feeding, such as decreased pH, increased acetate concentration, and low productivity. It has a good potential for commercialization.

Exploring the biological application of Penicillium fimorum-derived silver nanoparticles: In vitro physicochemical, antifungal, biofilm inhibitory, antioxidant, anticoagulant, and thrombolytic performance.

This study showed the anti-candida, biofilm inhibitory, antioxidant, anticoagulant, and thrombolytic properties of biogenic silver nanoparticles (AgNPs) fabricated by using the supernatant of Penicillium fimorum (GenBank accession number OQ568180) isolated from soil. The biogenic AgNPs were characterized by using different analytical techniques. A sharp surface plasmon resonance (SPR) peak of the colloidal AgNPs at 429.5 nm in the UV-vis spectrum confirmed the fabrication of nanosized silver particles. The broth microdilution assay confirmed the anti-candida properties of AgNPs with a minimum inhibitory concentration (MIC) of 4 µg mL-1. In the next step, the protein and DNA leakage assays as well as reactive oxygen species (ROS) assay were performed to evaluate the possible anti-candida mechanisms of AgNPs representing an increase in the total protein and DNA of supernatant along with a climb-up in ROS levels in AgNPs-treated samples. Flow cytometry also confirmed a dose-dependent cell death in the AgNPs-treated samples. Further studies also confirmed the biofilm inhibitory performance of AgNPs against Candia albicans. The AgNPs at the concentrations of MIC and 4*MIC inhibited 79.68 ± 14.38% and 83.57 ± 3.41% of biofilm formation in C. albicans, respectively. Moreover, this study showed that the intrinsic pathway may play a significant role in the anticoagulant properties of AgNPs. In addition, the AgNPs at the concentration of 500 µg mL-1, represented 49.27%, and 73.96 ± 2.59% thrombolytic and DPPH radical scavenging potential, respectively. Promising biological performance of AgNPs suggests these nanomaterials as a good candidate for biomedical and pharmaceutical applications.

Different Respiratory Samples for COVID-19 Detection by Standard and Direct Quantitative RT-PCR: A Literature Review.

The most common diagnostic method for detecting severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection is real-time quantitative reverse transcriptase-polymerase chain reaction (RT-qPCR). Upper respiratory tract samples, including nasopharyngeal swab (NPS), oropharyngeal swab (OPS), saliva and lower respiratory tract samples such as sputum, are the most widely used specimens for diagnosis of SARS-CoV-2 using RT-qPCR. This study aimed to compare the diagnostic performance of different samples for Coronavirus disease 2019 (COVID-19) detection. It was found that NPS, the reference respiratory specimen for COVID-19 detection, is more sensitive than OPS. However, the application of NPS has many drawbacks, including challenging sampling process and increased risk of transmission to healthcare workers (HCWs). Saliva samples can be collected less invasively and quickly by HCWs with less contact or by own patients, and they can be considered as an alternative to NPS for COVID-19 detection by RT-qPCR. Additionally, sputum, which demonstrates higher viral load can be applied in patients with productive coughs and negative results from NPS. Commonly, after viral RNA purification from patient samples, which is time-consuming and costly, RT-qPCR is performed to diagnose SARS-CoV-2. Herein, different approaches including physical (heat inactivation) and chemical (proteinase K treatment) methods, used in RNA extraction free- direct RT-qPCR, were reviewed. The results of direct RT-qPCR assays were comparable to the results of standard RT-qPCR, while cost and time were saved. However, optimal protocol to decrease cost and processing time, proper transport medium and detection kit should be determined.

Digital Citizen Science for Responding to COVID-19 Crisis: Experiences from Iran.

The Coronavirus Disease 2019 (COVID-19) pandemic has so far been the most severe global public health emergency in this century. Generally, citizen science can provide a complement to authoritative scientific practices for responding to this highly complex biological threat and its adverse consequences. Several citizen science projects have been designed and operationalized for responding to COVID-19 in Iran since the infection began. However, these projects have mostly been overlooked in the existing literature on citizen science. This research sheds light on the most significant online citizen science projects to respond to the COVID-19 crisis in Iran. Furthermore, it highlights some of the opportunities and challenges associated with the strengths and weaknesses of these projects. Moreover, this study captures and discusses some considerable insights and lessons learned from the failures and successes of these projects and provides solutions to overcome some recognized challenges and weaknesses of these projects. The outcomes of this synthesis provide potentially helpful directions for current and future citizen science projects-particularly those aiming to respond to biological disasters such as the COVID-19 pandemic.

A comparative review of immunoassays for COVID-19 detection.

Introduction: The gold standard for diagnosis of coronavirus disease 2019 (COVID-19) is detecting severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) by reverse transcription polymerase chain reaction (RT-PCR), which is expensive, time-consuming and may result in false-negative results. Serological tests can be employed for RT-PCR negative patients, contact tracing, determining the probability of protection against re-infection, and seroepidemiological studies.Areas covered: The main methodologies of serology-based tests for the detection of SARS-CoV-2 including enzyme-linked immunosorbent assays (ELISAs), chemiluminescent immunoassays (CLIAs) and lateral flow immunoassays (LFIAs) were reviewed and their diagnostic performances were compared. Herein, a literature review on the databases of PubMed, Scopus and Google Scholar between January 1, 2020 and June 30, 2020 based on the main serological methods for COVID-19 detection with the focus on comparative experiments was performed. The review was updated on December 31, 2020.Expert opinion: Serology testing could be considered as a part of diagnostic panel two-week post symptom onset. Higher sensitivity for serology-based tests could be achieved by determining combined IgG/IgM titers. Furthermore, higher sensitive serological test detecting neutralization antibody could be developed by targeting spike (S) antigen. It was also demonstrated that the sensitivity of ELISA/CLIA-based methods are higher than LFIA devices.

Favipiravir Effects on the Control of Clinical Symptoms of Hospitalized COVID-19 Cases: An Experience with Iranian Formulated Dosage Form.

Coronavirus disease -19 (COVID-19) pandemic, caused by SARS-CoV-2, has gradually spread worldwide, becoming a major public health event. This situation requires designing a novel antiviral agent against the SARS-CoV-2; however, this is time-consuming and the use of repurposed medicines may be promising. One such medicine is favipiravir, primarily introduced as an anti-influenza agent in east world. The aim of this study was to evaluate the efficacy and safety of favipiravir in comparison with lopinavir-ritonavir in SARS-CoV-2 infection. In this randomized clinical trial, 62 patients were recruited. These patients had bilateral pulmonary infiltration with peripheral oxygen saturation lower than 93%. The median time from symptoms onset to intervention initiation was seven days. Favipiravir was not available in the Iranian pharmaceutical market, and it was decided to formulate it at the research laboratory of School of Pharmacy, Shahid Beheshti University of Medical Sciences, Tehran, Iran. The patients received favipiravir tablet at a dose of 1600 mg orally twice a day for day one and then 600 mg orally twice a day for days 2 to 6. In the second group, the patients received lopinavir-ritonavir combination tablet at a dose of 200/50 mg twice a day for seven days. Fever, cough, and dyspnea were improved significantly in favipiravir group in comparison with lopinavir-ritonavir group on days four and five. Mortality rate and ICU stay in both groups were similar, and there was no significant difference in this regard (P = 0.463 and P = 0.286, respectively). Chest X-ray improvement also was not significantly different between the two groups. Adverse drug reactions occurred in both groups, and impaired liver enzymes were the most frequent adverse effect. In conclusion, early administration of oral favipiravir may reduce the duration of clinical signs and symptoms in patients with COVID-19 and hospitalization period. The mortality rate also should be investigated in future clinical trials.

Emerging Antineoplastic Biogenic Gold Nanomaterials for Breast Cancer Therapeutics: A Systematic Review.

Breast cancer remains as a concerning global health issue, being the second leading cause of cancer deaths among women in the United States (US) in 2019. Therefore, there is an urgent and substantial need to explore novel strategies to combat breast cancer. A potential solution may come from the use of cancer nanotechnology, an innovative field of study which investigates the potential of nanomaterials for cancer diagnosis, therapy, and theranostic applications. Consequently, the theranostic functionality of cancer nanotechnology has been gaining much attention between scientists during the past few years and is growing exponentially. The use of biosynthesized gold nanoparticles (AuNPs) has been explored as an efficient mechanism for the treatment of breast cancer. The present study supposed a global systematic review to evaluate the effectiveness of biogenic AuNPs for the treatment of breast cancer and their anticancer molecular mechanisms through in vitro studies. Online electronic databases, including Cochrane, PubMed, Scopus, Web of Science, Science Direct, ProQuest, and Embase, were searched for the articles published up to July 16, 2019. Our findings revealed that plant-mediated synthesis was the most common approach for the generation of AuNPs. Most of the studies reported spherical or nearly spherical-shaped AuNPs with a mean diameter less than 100 nm in size. A significantly larger cytotoxicity was observed when the biogenic AuNPs were tested towards breast cancer cells compared to healthy cells. Moreover, biogenic AuNPs demonstrated significant synergistic activity in combination with other anticancer drugs through in vitro studies. Although we provided strong and comprehensive preliminary in vitro data, further in vivo investigations are required to show the reliability and efficacy of these NPs in animal models.

Green Nanotechnology-based Gold Nanomaterials for Hepatic Cancer Therapeutics: A Systematic Review.

The objective of the current study was to systematically review the in-vitro anticancer activity of green synthesized gold nanoparticles (AuNPs) against hepatic cancer cells. The articles were identified through electronic databases, including PubMed, Scopus, Embase, Web of Science, Science Direct, ProQuest, and Cochrane. In total, 20 articles were found eligible to enter into our systematic review. Our findings showed that 65% of the articles used herbal extracts for the synthesis of AuNPs. Significantly, almost all of the articles stated the biofabrication of AuNPs below 100 nm in diameter. Impressively, most of the studies showed significant anticancer activity against HepG2 cells. Molecular studies stated the induction of apoptosis through the AuNPs-treated cells. We provided valuable information about the molecular mechanisms of AuNPs-induced cytotoxicity against HepG2 cells as well as their biocompatibility. The studies represented that AuNPs can be effective as anticancer drug nanocarrier for drug delivery systems. In addition, AuNP surface functionalization provides an opportunity to design multifunctional nanoparticles by conjugating them to diagnostic and/or therapeutic agents for theranostic purposes. Overall, our findings depicted considerable biogenic AuNPs-induced cytotoxicity, however, future studies should assess the anticancer activity of biogenic AuNPs through in-vivo studies, which was missing from such studies.

A Systematic Review of the Genotoxicity and Antigenotoxicity of Biologically Synthesized Metallic Nanomaterials: Are Green Nanoparticles Safe Enough for Clinical Marketing?

Background and objectives: Although studies have elucidated the significant biomedical potential of biogenic metallic nanoparticles (MNPs), it is very important to explore the hazards associated with the use of biogenic MNPs. Evidence indicates that genetic toxicity causes mutation, carcinogenesis, and cell death. Materials and Methods: Therefore, we systematically review original studies that investigated the genotoxic effect of biologically synthesized MNPs via in vitro and in vivo models. Articles were systematically collected by screening the literature published online in the following databases; Cochrane, Web of Science, PubMed, Scopus, Science Direct, ProQuest, and EBSCO. Results: Most of the studies were carried out on the MCF-7 cancer cell line and phytosynthesis was the general approach to MNP preparation in all studies. Fungi were the second most predominant resource applied for MNP synthesis. A total of 80.57% of the studies synthesized biogenic MNPs with sizes below 50 nm. The genotoxicity of Ag, Au, ZnO, TiO2, Se, Cu, Pt, Zn, Ag-Au, CdS, Fe3O4, Tb2O3, and Si-Ag NPs was evaluated. AgNPs, prepared in 68.79% of studies, and AuNPs, prepared in 12.76%, were the two most predominant biogenic MNPs synthesized and evaluated in the included articles. Conclusions: Although several studies reported the antigenotoxic influence of biogenic MNPs, most of them reported biogenic MNP genotoxicity at specific concentrations and with a dose or time dependence. To the best of our knowledge, this is the first study to systematically evaluate the genotoxicity of biologically synthesized MNPs and provide a valuable summary of genotoxicity data. In conclusion, our study implied that the genotoxicity of biologically synthesized MNPs varies case-by-case and highly dependent on the synthesis parameters, biological source, applied assay, etc. The gathered data are required for the translation of these nanoproducts from research laboratories to the clinical market.

Fungus-mediated Extracellular Biosynthesis and Characterization of Zirconium Nanoparticles Using Standard Penicillium Species and Their Preliminary Bactericidal Potential: A Novel Biological Approach to Nanoparticle Synthesis.

Biological synthesis of nanoparticles (NPs) has gained extensive attention during recent years by using various biological resources such as plant extracts and microorganisms as reducing and stabilizing agents. The objective of the present study was to biosynthesize zirconium NPs using Penicillium species as a reliable and eco-friendly protocol for the first time. The synthesized NPs were characterized using Scanning Electron Microscope (SEM), Atomic Force Microscope (AFM), Dynamic Light Scattering (DLS), Energy Dispersive X-ray (EDX), and Fourier Transform Infrared (FT-IR). The results showed that three Penicillium species were able to synthesize zirconium NPs extracellularly with spherical morphology below 100 nm. Moreover, the preliminary antibacterial activity of zirconium NPs represented considerable antibacterial potential against Gram-negative bacteria. Overall, the current study demonstrated a novel bio-based approach for preparation of zirconium NPs. Further studies are required to expend this laboratory-based investigation to an industrial scale owing to their superiorities over traditional physicochemical methods such as cost-effectiveness and eco-friendliness.

Optimization of Growth Conditions of Lentinus edodes Mycelium and Polysaccharides on Walnut Shell by-Products Using Response Surface Analysis.

Lentinus edodes (L. edodes) is one of the most widely used traditional Chinese medicines and a high producer of various bioactive compounds such as polysaccharides. It has been shown that L. edodes polysaccharides (LEPLS) have several physiological effects with potential medical applications. In addition, the ability of L. edodes to grow and produce bioactive compounds on industrial by-products makes it an excellent candidate for the lage-scale production of such compounds. The objective of this study was to optimize mycelium and polysaccharide production by L. edodes on walnut shell through a two-step procedure including a one-factor-at-a-time approach to select the most important factors and a response surface methodology design to determine their optimum combinations. Several factors were evaluated in the first step and among them inoculum size, incubation time, and C/N ratio were selected for optimization of using RSM. The RSM model estimated that a maximal yield of biomass and LEPLS (0.043 mg/g and 46.80 mg/g respectively) could be obtained when inoculum size, incubation time, and C/N ratio were set at 23.41, 30, 10 units, respectively. These values were also verified by validation experiments.

Effect of Acyl Homoserine Lactone on Recombinant Production of Human Insulin-like Growth Factor-1 in Batch Culture of Escherichia coli.

BACKGROUND: IGF-I as a human growth factor produced in Escherichia coli is a single, non-glycosylated, polypeptide chain containing 70 amino acids and having a molecular mass of 7.6 kDa. Up to now, E. coli expression system has been widely used as the host to produce rhIGF-1 with high yields. Acyl Homoserine Lactones (AHLs) are intercellular signaling molecules used in quorum sensing by Gram-negative bacteria. Quorum sensing is a cell density-dependent gene regulation process that allows bacterial cells to express specific genes only when signaling molecules reach the sufficient concentration. OBJECTIVE: For the first time, this study focuses on the N-hexanoyl-L- Homoserine Lactone (HHL) activity on increasing the cell growth and rh-IGF-1concentration in batch culture of E. coli. METHOD: The maximum production of rhIGF-I was previously optimized in 32y culture medium at 32°C with 0.05 mM IPTG as inducer and 10 g/l glucose concentration. Under this condition, different amounts of HHL (0.001 µg/ml, 1 µg/ml, and 100µg/ml) were evaluated as an inducer for IGF-1 production. RESULTS: Generally, with increasing of HHL concentration, an increase in dry cell weight (2.45 mg/ml to 4.63 mg/ml) and IGF-I expression level (0.4 mg/ml to 0.77 mg/ml) was observed. CONCLUSION: HHL or other types of AHLs can be considered as protein production inducer in bacterial expression systems through the quorum sensing pathways.

An efficient biotransformation of progesterone into 11α-hydroxyprogesterone by Rhizopus microsporus var. oligosporus.

Rhizopus microsporus var. oligosporus is a fungus that belongs to the Mucoraceae family that is used for the preparation of some soy-fermented foods. Microbial biotransformation of progesterone by R. microsporus var. oligosporus afforded some monohydroxylated and dihydroxylated metabolites. The main product was purified using chromatographic methods and identified as 11α-hydroxyprogesterone on the basis of its spectroscopic features. Time course studies by high-performance thin-layer chromatography demonstrated that this fungi efficiently hydroxylated progesterone at the 11α-position for 3 days with a yield of 76.48%, but beyond this time, the microorganism transformed 11α-hydroxyprogesterone into dihydroxylated metabolites. 11α-Hydroxyprogesterone is widely used as a precursor in the synthesis of hydrocortisone and other steroidal anti-inflammatory agents.

Simultaneous Optimization of the Production of Organic Selenium and Cell Biomass in Saccharomyces Cerevisiae by Plackett-Burman and Box-Behnken Design.

Selenium (Se) as a vital trace element has many biological activities such as anti-inflammation and anti-oxidation. Selenomethionine as an organic selenium plays a vital role in the response to oxidative stress. At present, Saccharomyces cerevisiae is one of the best microorganisms that has the ability to accumulate selenium. Production of Seleno-yeast was done by growing Saccharomyces cerevisiae in the presence of water soluble selenium salt (Na2SeO3) as a part of the medium. The yield of selenium biotransformation and yeast biomass can be improved by optimizing the process conditions in two steps. First, the effects of several culture parameters (culture conditions and culture media) were studied using the Plackett-Burman design. After that, determining the optimum levels of the effective parameters was performed by Box-Behnken response surface methodology. Optimization of the conditions was performed with the aim of simultaneously optimizing the biomass and selenium biotransformation. In this investigation, the effect of the eleven culture parameters was studied with Plackett-Burman design. Then, four significant culture parameters such as glucose concentration, aeration, selenium concentration, and temperature were optimized with Box-Behnken response surface methodology.

Baeyer-Villiger oxidation of progesterone by Aspergillus sojae PTCC 5196.

Microbial transformations are capable of producing steroid substances difficult to synthesize by chemical methods. Strains belonging to the genus Aspergillus are effective facilitators of microbial biotransformations due to their enzymatic diversity. In this study, the biotransformation of progesterone by the fungus Aspergillus sojae (A. sojae) PTCC 5196 was examined. Analysis of the bioconversion process revealed that progesterone was converted to testololactone through a three-step pathway (17ß-acetyl side chain cleavage, 17ß-hydroxyl oxidation, and oxygenative lactonization of 17-ketone), indicating the presence of Baeyer-Villiger monooxygenase (BVMO) activity in the fungal strain. GC analysis confirmed the production of testololactone with a yield of 99% in 24 h. Faster testololactone production was induced in the presence of both C-21 (progesterone) and C-19 (androstenedione, testosterone, and dehydroepiandrosterone [DHEA]) steroid substances. Due to the high biotransformation rate observed in the present study, A. sojae may be a novel and promising candidate in the production of testololactone.

Biosynthesis and Characterization of Biogenic Tellurium Nanoparticles by Using Penicillium chrysogenum PTCC 5031: A Novel Approach in Gold Biotechnology.

Production of nanoparticles has been attractive by biological based fabrication as an alternative to physical and chemical approaches due to exceeding need to develop safe, reliable, clean and eco-friendly methods for the preparation of nanoparticle for pharmaceutical and biomedical applications. In the present study, biogenic tellurium nanoparticles (TeNPs) were successfully prepared using potassium tellurite (K2TeO3, 3H2O) via an eco-friendly and simple green approach by exploiting extracellular enzymes and biomolecules secreted from Penicillium chrysogenum PTCC 5031 at room temperature for the first time. The biofabricated TeNPs were characterized by Atomic Force Microscope (AFM), Scanning Electron Microscopy (SEM), Dynamic Light Scattering (DLS), Energy Dispersive X-ray spectroscopy (EDX), and Fourier Transform Infrared (FT-IR) spectrum. The AFM and SEM images revealed that the TeNPs were fairly uniform in size with a spherical shape and superior monodispersity. Furthermore, the DLS indicated that the average hydrodynamic diameter of TeNPs was around 50.16 nm and polydispersity index (PdI) of 0.012. The EDX results depicted that TeNPs display an absorption peak at 3.8 keV, indicating the presence of the elemental tellurium. Additionally, the FT-IR analysis of TeNPs exhibited the presence of possible functional groups that may have a role as bioreducers and capping agents. Overall, the results strongly suggested that P. chrysogenum can be a potential nanofactory for the preparation of TeNPs due to several advantages including non-pathogenic organism, fast growth rate, and high capacity of elemental ions reduction, as well as facile and economical biomass handling.

RP-HPLC Method Development and Validation for Determination of Eptifibatide Acetate in Bulk Drug Substance and Pharmaceutical Dosage Forms.

A new, rapid, economical and isocratic reverse phase high performance liquid chromatography (RP-HPLC) method was developed for the determination of eptifibatide acetate, a small synthetic antiplatelet peptide, in bulk drug substance and pharmaceutical dosage forms. The developed method was validated as per of ICH guidelines. The chromatographic separation was achieved isocratically on C18 column (150 x 4.60 mm i.d., 5 µM particle size) at ambient temperature using acetonitrile (ACN), water and trifluoroacetic acid (TFA) as mobile phase at flow rate of 1 mL/min and UV detection at 275 nm. Eptifibatide acetate exhibited linearity over the concentration range of 0.15-2 mg/mL (r2=0.997) with limit of detection of 0.15 mg/mL The accuracy of the method was 96.4-103.8%. The intra-day and inter-day precision were between 0.052% and 0.598%, respectively. The present successfully validated method with excellent selectivity, linearity, sensitivity, precision and accuracy was applicable for the assay of eptifibatide acetate in bulk drug substance and pharmaceutical dosage forms.

Challenges to Design and Develop of DNA Aptamers for Protein Targets. II. Development of the Aptameric Affinity Ligands Specific to Human Plasma Coagulation Factor VIII Using SEC-SELEX.

Protein specific aptamers are highly applicable affinity ligands in different fields of research and clinical applications. They have been developed against various targets, in particular, bio-macromolecules such as proteins. Among human proteins, the coagulation factors are the most attractive targets for aptamer selection and their specific aptamers have valuable characteristics in therapeutic and analytical applications. In this study, a plasma derived coagulation factor VIII was considered as the protein target for DNA aptamer selection using size exclusion chromatography-SELEX. Potential aptameric oligonucleotides with high affinity and specificity were achieved during eight rounds of selection. Binding affinity constant of selected aptamer and aptameric enriched pool were in nanomolar range that was comparable to monoclonal antibodies. Further improvement studies can result in aptamers that are more promising as an industrial affinity ligand for the purification of anti-hemophilia factor from plasma source.

L-Asparaginase Activity in Cell Lysates and Culture Media of Halophilic Bacterial Isolates.

The objective of this study was to isolate halophilic bacteria with the ability to produce intracellular or extracellular L-asparaginase. A total number of 120 halophilic bacteria were isolated from 17 different saline habitats of Iran including salt lakes, wetlands, brine springs and deserts. Among these, 68 were able to grow in the presence of 1.5 M NaCl and 52 demonstrated the ability to grow in the selection medium containing 3.5 M NaCl. None of the isolates appeared to produce appreciable amounts of extracellular L-asparaginase. Among the isolates that produced intracellular L-asparaginase, 5 moderate and 1 extreme halophiles were selected for further study based on their observed activity level. The moderately halophilic isolates were shown to belong to the genus Halomonas while the extreme halophile was identified as a member of the genus Aidingimonas.

Enhanced Production of Insulin-like Growth Factor I Protein in Escherichia coli by Optimization of Five Key Factors.

Human insulin-like growth factor I (hIGF-I) is a kind of growth factor with clinical significance in medicine. Up to now, E. coli expression system has been widely used as a host to produce rhIGF-1 with high yields. Batch cultures as non-continuous fermentations were carried out to overproduce rhIGF-I in E. coli. The major objective of this study is over- production of recombinant human insulin-like growth factor I (rhIGF-I) through a developed process by recruiting effective factors in order to achieve the most recombinant protein. In this study we investigated the effect of culture medium, induction temperature and amount of inducer on cell growth and IGF-1 production. Taguchi design of experiments (DOE) method was used as the statistical method. Analysis of experimental data showed that maximum production of rhIGF-I was occurred in 32y culture medium at 32 °C and 0.05 Mm IPTG. Under this condition, 0.694 g/L of rhIGF-I was produced as the inclusion bodies. Following optimization of these three factors, we have also optimized the amount of glucose and induction time in 5 liter top bench bioreactor. Full factorial design of experiment method was used for these two factors as the statistical method. 10 g/L and OD600=5 were selected as the optimum point of Glucose amount and induction time, respectively. Finally, we reached to a concentration of 1.26 g/L rhIGF-1 at optimum condition.