A neutral rhenium-biimidazole complex for the selective recognition of fluoride ions.

The neutral rhenium(I)-biimidazole complex [Re(CO)3(biimH)(1,4-NVP)] (1) was designed and synthesized by a one-pot reaction of Re2(CO)10, 2,2'-biimidazole (biimH2) and 4-(1-naphthylvinyl)pyridine (1,4-NVP). The structure of 1 was characterized by various spectroscopic techniques including IR, 1H NMR, FAB-MS, and elemental analysis and further confirmed by a single-crystal X-ray diffraction analysis. The mononuclear complex 1, a relatively simple structure with an octahedral geometry, is comprised of facial-arranged carbonyl groups, one chelated biimH monoanion, and one 1,4-NVP. Complex 1 shows the lowest energy absorption band at around 357 nm and an emission band at 408 nm in THF. The luminescent characteristics of 1 combined with the hydrogen bonding ability of the partially coordinated monoionic biimidazole ligand permits the complex to selectively recognize fluoride ions (F-) in the presence of other halides through a dramatic luminescence enhancement. The recognition mechanism of 1 can be convincingly explained in terms of H-bond formation and proton abstraction upon the addition of F- ions by 1H and 19F NMR titration experiments. The electronic properties of 1 were further supported by time dependent density functional theory (TDDFT) computational studies.

Host-guest interaction studies of polycyclic aromatic hydrocarbons (PAHs) in alkoxy bridged binuclear rhenium (I) complexes.

The interaction of two neutral alkoxy bridged binuclear rhenium(I) complexes, 1 and 2 [{Re(CO)3(1,4-NVP)}2(µ2-OR)2] (1, R = C4H9; 2, R = C10H21; 1,4-NVP = 4-(1-naphthylvinyl)pyridine] with polycyclic aromatic hydrocarbons (PAH) is investigated. UV-vis absorption, emission, 1H NMR spectral titrations, TCSPC lifetime studies and DFT theoretical calculations were carried out to examine the binding responses of complexes 1 and 2 with various PAHs such as pyrene, naphthalene, anthracene and phenanthrene. The UV-Vis absorption spectra showed an increase in absorbance of the metal-to ligand charge-transfer (MLCT) and ligand centered (LC) bands upon addition of various PAH molecules to 1 and 2, whereas the emission behavior was found to show emission quenching, which might occur through energy transfer pathway. The binding constants (K) of complexes 1 and 2 for various PAHs are found to be in the order of 104 M-1 with a 1:1 binding mode, as determined from UV-vis absorption and emission spectral titration studies. 1H NMR spectral studies show that the chemical shifts of pyrene guest and the 1,4-NVP moiety of 2 are shifted up-field, whilst the alkoxy protons do not show any appreciable change in their chemical shifts. It is believed that the open cavities present in the Re(I) complexes may lead to the recognition of PAHs via CH···π interaction.

Development of luminescent sensors based on transition metal complexes for the detection of nitroexplosives.

The detection of chemical explosives is a major area of research interest and is essential for the military as well as homeland security to counter the catastrophic effects of global terrorism. In recent years, tremendous effort has been devoted to the development of luminescent materials for the detection of explosives in the vapor, solution, and solid states with a high degree of selectivity and sensitivity and a rapid response time. Apart from the wide range of organic fluorescent chemosensors, transition metal complexes play a prominent role in the sensing of nitroaromatic explosives owing to their rich photophysical characteristics. This review briefly summarizes the salient features of the design and preparation of transition metal (Zn(ii), Ir(iii), Pd(ii), Pt(ii), Re(i) and Ru(ii)) complexes/metallacycles/metallosupramolecules with emphasis on their photophysical properties, sensing behavior, mechanism of action, and the driving forces for detecting explosives and future prospects and challenges. Most of the probes that have been reported to date act as "turn-off" luminescent sensors because their emission (intensity, lifetime, and quantum yield) is eventually quenched upon sensing with nitroaromatic compounds (NACs) through photo-induced electron or energy transfer. These unique properties of transition metal complexes in response to explosives open up new vistas for the development of real world applications such as on-site detection, in-field security, forensic research, etc.

Alkoxy bridged binuclear rhenium (I) complexes as a potential sensor for ß-amyloid aggregation.

Alkoxy bridged binuclear rhenium(I) complexes are used as a probe for the selective and sensitive detection of aggregation of ß-amyloid fibrils that are consorted with Alzheimer's disease (AD). The strong binding of the complexes is affirmed by the fluorescence enhancement and calculated binding constant value in the order of 10(5)M(-1) is obtained from the Scatchard plots. The binding of ß-amyloid can be attributed to π-π stacking interaction of naphthalene moiety present in rhenium(I) complexes, and it is supported by docking studies. The selectivity is quite high towards other proteins and the formation of fibrils can be observed in the range of 30-40 nm through the AFM and TEM techniques.

Aggregation-induced emission enhancement in alkoxy-bridged binuclear rhenium(I) complexes: application as sensor for explosives and interaction with microheterogeneous media.

The aggregation-induced emission enhancement (AIEE) characteristics of the two alkoxy-bridged binuclear Re(I) complexes [{Re(CO)3(1,4-NVP)}2(µ2-OR)2] (1, R = C4H9; 2, C10H21) bearing a long alkyl chain with 4-(1-naphthylvinyl)pyridine (1,4-NVP) ligand are illustrated. These complexes in CH2Cl2 (good solvent) are weakly luminescent, but their intensity increased enormously by almost 500 times by the addition of poor solvent (CH3CN) due to aggregation. By tracking this process via UV-vis absorption and emission spectral and TEM techniques, the enhanced emission is attributed to the formation of nanoaggregates. The nanoaggregate of complex 2 is used as a sensor for nitroaromatic compounds. Furthermore, the study of the photophysical properties of these binuclear Re(I) complexes in cationic, cetyltrimethylammonium bromide (CTAB), anionic, sodium dodecyl sulfate (SDS), and nonionic, p-tert-octylphenoxypolyoxyethanol (TritonX-100, TX-100), micelles as well as in CTAB-hexane-water and AOT-isooctane-water reverse micelles using steady-state and time-resolved spectroscopy and TEM analysis reveals that the nanoaggregates became small and compact size.

Sensitized near-infrared luminescence from Nd(III), Yb(III) and Er(III) complexes by energy-transfer from ruthenium 1,3-Bis([1,10]phenanthroline-[5,6-d]-imidazol-2 -yl)benzene.

The luminescent ruthenium 1,3 -bis([1,10]phenanthroline-[5,6 -d]- imidazol-2 -yl)benzene (bpibH2) complex, a potentially useful bridging ligand with a vacant diimine site, has been used as 'metallo ligand' to make heterodinuclear d-f complexes by attachment of a {Ln(dik)3} fragment (dik = 1,3-diketonate) at the vacant site. When Ln = Nd, Yb, or Er the lanthanide centre has low-energy f-f excited states capable of accepting energy from the (3)MLCT excited state of the Ru(II) centre, there is quenching in the (3)MLCT luminescence of the Ru(II) centre, that affords sensitized lanthanide(III) based luminescence in the near-IR region. Nd(III) was found to be the most effective at quenching the (3)MLCT luminescence of the ruthenium component because of the high density of f-f excited states of the appropriate energy which make it as effective energy-acceptor compared to Er and Yb complexes.

Control of light-promoted [2+2] cycloaddition reactions by a remote ancillary regulatory group that is covalently attached to rhenium rectangles.

The high-yielding self-assembly of three neutral rhenium(I) rectangles, [Re(2)(CO)(6)(L)(bpe)](2) (1 a, L=2,2'-biimidazolate (biim); 1 b, L=2,2'-bisbenzimidazolate (bbim); 1 c, L=2,2'-bis(4,5-dimethylimidazolate) (bdmim); bpe=trans-1,2-bis(4-pyridyl)ethylene), under hydrothermal conditions is described. The rectangles were structurally characterized by spectroscopic techniques and further confirmed by single-crystal X-ray diffraction. Upon irradiation with a Hg lamp at 365 nm, the bpe ligands of rectangles 1 a and 1 b underwent [2+2] photocycloaddition reactions to produce [{(Re(CO)(3))(2)L}(2)(4,4'-tpcb)(2)] (2 a, L=biim; 2 b, L=bbim; 4,4'-tpcb=1,2,3,4-tetrakis(4-pyridyl)cyclobutane) through a single-crystal-to-single-crystal (SCSC) transformation. However, rectangle 1 c, which contained methyl groups on the 2,2'-biimidazolate ligand, failed to undergo cycloaddition, even after prolonged irradiation. This result indicates that the light-induced cycloaddition reaction can be preferentially controlled by the remote regulatory substituents, which are attached onto the same backbone of the rectangle complex. This transformation is the first reported utilization of a remote ancillary regulatory ligand that is covalently attached onto a coordination compound to control the [2+2] cycloaddition reaction.

Neutral metallacyclic rotors.

A prototype of a neutral Re-based metallacyclic rotor, assembled in a one-step process, possesses a para-phenylene rotor that rotates in solution with respect to the stator.