RESUMEN
Identifying sources is crucial for proposing effective actions to combat marine litter pollution. Here, we used an innovative approach to identify hotspots of mismanaged plastic waste (MPW) within Brazil and subsequent leakage to the ocean, based on population density, socio-economic conditions, municipal solid waste management and environmental parameters. We estimated plastic waste generation and MPW for each of the 5570 Brazilian municipalities, which totaled 3.44 million metric tons per year. Then, we estimated the probability of litter mobilization and transport (P) and the relative risk of leakage to the ocean (MPW × P). The Guanabara Bay and La Plata River comprised the main oceanic entry hotspots of litter produced in Brazil. The use of national databases allowed us to increase spatial and temporal granularity, offering a detailed baseline for the application of prevention and mitigation actions. However, overcoming data limitations is still a challenge in Brazil as in other Global South countries.
Asunto(s)
Plásticos , Administración de Residuos , Brasil , Contaminación Ambiental , Residuos Sólidos , Residuos , Monitoreo del AmbienteRESUMEN
Mismanaged municipal solid waste (MSW), the major source of plastics pollution and a key contributor to climate forcing, in Global South cities poses public health and environmental problems. This study analyses the first consistent and quality assured dataset available for cities distributed worldwide, featuring a comprehensive set of solid waste management performance indicators (Wasteaware Cities Benchmark Indicators - WABI). Machine learning (multivariate random forest) and univariate non-linear regression are applied, identifying best-fit converging models for a broad range of explanatory socioeconomic variables. These proxies describe in a variety of ways generic levels of progress, such as Gross Domestic Product - Purchasing Power per capita, Social Progress Index (SPI) and Corruption Perceptions Index. Specifically, the research tests and quantitatively confirms a long-standing, yet unverified, hypothesis: that variability in cities' performance on MSW can be accounted for by socioeconomic development indices. The results provide a baseline for measuring progress as cities report MSW performance for the sustainable development goal SDG11.6.1 indicator: median rates of controlled recovery and disposal are approximately at 45 % for cities in low-income countries, 75 % in lower-middle, and 100 % for both upper-middle and high-income. Casting light on aspects beyond the SDG metric, on the quality of MSW-related services, show that improvements in service quality often lag improvements in service coverage. Overall, the findings suggest that progress in collection coverage, and controlled recovery and disposal has already taken place in low- and middle-income cities. However, if cities aspire to perform better on MSW management than would have been anticipated by the average socioeconomic development in their country, they should identify ways to overcome systemic underlying failures associated with that socioeconomic level. Most alarmingly, 'business as usual' development would substantially increase their waste generation per capita unless new policies are found to promote decoupling.
RESUMEN
The global plastics reprocessing sector is likely expand as the circular economy becomes more established and efforts to curb plastic pollution increase. Via a critical systematic scoping review (PRISMA-ScR), we focused on two critical challenges for occupational and public health that will require consideration along with this expansion: (1) Legacy contamination in secondary plastics, addressing the risk of materials and substances being inherited from the previous use and carried (circulated or transferred) through into new products when reprocessed material enters its subsequent use phase (recycled, secondary plastic); and, (2) Extrusion of secondary plastics during the final stage of conventional mechanical reprocessing. Based on selected literature, we semi-quantitatively assessed nine risk scenarios and ranked them according to the comparative magnitude of risk to human health. Our analysis highlights that despite stringent regulation, industrial diligence and enforcement, occasionally small amounts of potentially hazardous substances contained in waste plastics are able to pass through established safeguards and re-enter (cascade into) the next use phase (product cycle) after being recycled. Although many of these 'inherited' chemical substances are present at concentrations unlikely to pose a serious and imminent threat, their existence may indicate a wider or possible increase in pollution dispersion. Our assessment indicates that the highest risk results from exposure to these substances during extrusion by mechanical reprocessors in contexts where only passive ventilation, dilution and dispersion are used as control measures. Our work sets the basis to inform improved future risk management protocols for a non-polluting circular economy for plastics.
Asunto(s)
Plásticos , Administración de Residuos , Humanos , Plásticos/química , Salud Pública , Reciclaje , Contaminación Ambiental , Sustancias PeligrosasRESUMEN
Over the coming decades, a large additional mass of plastic waste will become available for recycling, as efforts increase to reduce plastic pollution and facilitate a circular economy. New infrastructure will need to be developed, yet the processes and systems chosen should not result in adverse effects on human health and the environment. Here, we present a rapid review and critical semi-quantitative assessment of the potential risks posed by eight approaches to recovering value during the resource recovery phase from post-consumer plastic packaging waste collected and separated with the purported intention of recycling. The focus is on the Global South, where there are more chances that high risk processes could be run below standards of safe operation. Results indicate that under non-idealised operational conditions, mechanical reprocessing is the least impactful on the environment and therefore most appropriate for implementation in developing countries. Processes known as 'chemical recycling' are hard to assess due to lack of real-world process data. Given their lack of maturity and potential for risk to human health and the environment (handling of potentially hazardous substances under pressure and heat), it is unlikely they will make a useful addition to the circular economy in the Global South in the near future. Inevitably, increasing circular economy activity will require expansion towards targeting flexible, multi-material and multilayer products, for which mechanical recycling has well-established limitations. Our comparative risk overview indicates major barriers to changing resource recovery mode from the already dominant mechanical recycling mode towards other nascent or energetic recovery approaches.
Asunto(s)
Plásticos , Reciclaje , Humanos , Plásticos/química , Contaminación Ambiental , Embalaje de Productos , Sustancias PeligrosasRESUMEN
Large quantities of mismanaged plastic waste threaten the health and wellbeing of billions worldwide, particularly in low- and middle-income countries where waste management capacity is being outstripped by increasing levels of consumption and plastic waste generation. One of the main self-management strategies adopted by 2 billion people who have no waste collection service, is to burn their discarded plastic in open, uncontrolled fires. While this strategy provides many benefits, including mass and volume reduction, it is a form of plastic pollution that results in the release of chemical substances and particles that may pose serious risks to public health and the environment. We followed adapted PRISMA guidelines to select and review 20 publications that provide evidence on potential harm to human health from open burning plastic waste, arranging evidence into eight groups of substance emissions: brominated flame retardants; phthalates; potentially toxic elements; dioxins and related compounds; bisphenol A; particulate matter; and polycyclic aromatic hydrocarbons. We semiquantitatively assessed 18 hazard-pathway-receptor combination scenarios to provide an indication of the relative harm of these emissions so that they could be ranked, compared and considered in future research agenda. This assessment overwhelmingly indicated a high risk of harm to waste pickers, a large group of 11 million informal entrepreneurs who work closely with waste, delivering a circular economy but often without protective equipment or a structured, safe system of work. Though the risk to human health from open burning emissions is high, this remains a substantially under-researched topic.
Asunto(s)
Retardadores de Llama , Eliminación de Residuos , Humanos , Plásticos , Salud Pública , ReciclajeRESUMEN
The uncertainty arising from laboratory sampling (sub-sampling) can compromise the accuracy of analytical results in highly inherent heterogeneous materials, such as solid waste. Here, we aim at advancing our fundamental understanding on the possibility for relatively unbiased, yet affordable and practicable sub-sampling, benefiting from state of the art equipment, theoretical calculations by the theory of sampling (ToS) and implementation of best sub-sampling practices. Solid recovered fuel (SRF) was selected as a case of a solid waste sample with intermediate heterogeneity and chlorine (Cl) as an analyte with intermediate variability amongst waste properties. ToS nomographs were constructed for different sample preparation scenarios presenting the trend of uncertainty during sub-sampling. Nomographs showed that primary shredding (final d90 ≤ 0.4 cm) can reduce the uncertainty 11 times compared to an unshredded final sub-sample (d ≈ 3 cm), whereas cryogenic shredding in the final sub-sample can decrease the uncertainty more than three times compared to primary shredding (final d90 ≤ 0.015 cm). Practices that can introduce bias during sub-sampling, such as mass loss, moisture loss and insufficient Cl recovery were negligible. Experimental results indicated a substantial possibility to obtain a representative final sub-sample (uncertainty ≤ 15%) with the established sub-sampling plan (57-93%, with 95% confidence), although this possibility can be considerably improved by drawing two final sub-samples instead (91-98%, with 95% confidence). The applicability of ToS formula in waste-derived materials has to be investigated: theoretical ToS calculations assume a poorer performance of the sub-sampling plan than evidenced by the experimental results.
Asunto(s)
Eliminación de Residuos , Cloro , Residuos Sólidos/análisis , IncertidumbreRESUMEN
Plastic pollution is a pervasive and growing problem. To estimate the effectiveness of interventions to reduce plastic pollution, we modeled stocks and flows of municipal solid waste and four sources of microplastics through the global plastic system for five scenarios between 2016 and 2040. Implementing all feasible interventions reduced plastic pollution by 40% from 2016 rates and 78% relative to "business as usual" in 2040. Even with immediate and concerted action, 710 million metric tons of plastic waste cumulatively entered aquatic and terrestrial ecosystems. To avoid a massive build-up of plastic in the environment, coordinated global action is urgently needed to reduce plastic consumption; increase rates of reuse, waste collection, and recycling; expand safe disposal systems; and accelerate innovation in the plastic value chain.
Asunto(s)
Contaminantes Ambientales , Contaminación Ambiental/prevención & control , Plásticos , Reciclaje , Modelos TeóricosRESUMEN
Thermogravimetric analysis (TGA) is the most widespread thermal analytical technique applied to waste materials. By way of critical review, we establish a theoretical framework for the use of TGA under non-isothermal conditions for compositional analysis of waste-derived fuels from municipal solid waste (MSW) (solid recovered fuel (SRF), or refuse-derived fuel (RDF)). Thermal behaviour of SRF/RDF is described as a complex mixture of several components at multiple levels (including an assembly of prevalent waste items, materials, and chemical compounds); and, operating conditions applied to TGA experiments of SRF/RDF are summarised. SRF/RDF mainly contains cellulose, hemicellulose, lignin, polyethylene, polypropylene, and polyethylene terephthalate. Polyvinyl chloride is also used in simulated samples, for its high chlorine content. We discuss the main limitations for TGA-based compositional analysis of SRF/RDF, due to inherently heterogeneous composition of MSW at multiple levels, overlapping degradation areas, and potential interaction effects among waste components and cross-contamination. Optimal generic TGA settings are highlighted (inert atmosphere and low heating rate (⩽10°C), sufficient temperature range for material degradation (⩾750°C), and representative amount of test portion). There is high potential to develop TGA-based composition identification and wider quality assurance and control methods using advanced thermo-analytical techniques (e.g. TGA with evolved gas analysis), coupled with statistical data analytics.
Asunto(s)
Residuos de Alimentos , Eliminación de Residuos , Incineración , Residuos Sólidos/análisis , TermogravimetríaRESUMEN
The level of uncertainty during quantification of hazardous elements/properties of waste-derived products is affected by sub-sampling. Understanding sources of variability in sub-sampling can lead to more accurate risk quantification and effective compliance statistics. Here, we investigate a sub-sampling scheme for the characterisation of solid recovered fuel (SRF) - an example of an inherently heterogeneous mixture containing hazardous properties. We used statistically designed experiments (DoE) (nested balanced ANOVA) to quantify uncertainty arising from material properties, sub-sampling plan and analysis. This was compared with the theoretically estimated uncertainty via theory of sampling (ToS). The sub-sampling scheme derives representative analytical results for relatively uniformly dispersed properties (moisture, ash, and calorific content: RSDâ¯≤â¯6.1 %). Much higher uncertainty was recorded for the less uniformly dispersed chlorine (Cl) (RSD: 18.2 %), but not considerably affecting SRF classification. The ToS formula overestimates the uncertainty from sub-sampling stages without shredding, possibly due to considering uncertainty being proportional to the cube of particle size (FE â d3), which may not always apply e.g. for flat waste fragments. The relative contribution of sub-sampling stages to the overall uncertainty differs by property, contrary to what ToS stipulates. Therefore, the ToS approach needs adaptation for quantitative application in sub-sampling of waste-derived materials.
RESUMEN
The European Commission (EC) recently introduced a 'Circular Economy Package', setting ambitious recycling targets and identifying waste plastics as a priority sector where major improvements are necessary. Here, the authors explain how different collection modalities affect the quantity and quality of recycling, using recent empirical data on household (HH) post-consumer plastic packaging waste (PCPP) collected for recycling in the devolved administration of England over the quarterly period July-September 2014. Three main collection schemes, as currently implemented in England, were taken into account: (i) kerbside collection (KS), (ii) household waste recycling centres (HWRCs) (also known as 'civic amenity sites'), and (iii) bring sites/banks (BSs). The results indicated that: (a) the contribution of KS collection scheme in recovering packaging plastics is higher than HWRCs and BBs, with respective percentages by weight (wt%) 90%, 9% and 1%; (b) alternate weekly collection (AWC) of plastic recyclables in wheeled bins, when collected commingled, demonstrated higher yield in KS collection; (c) only a small percentage (16%) of the total amount of post-consumer plastics collected in the examined period (141â¯kt) was finally sent to reprocessors (22â¯kt); (c) nearly a third of Local Authorities (LAs) reported insufficient or poor data; and (d) the most abundant fractions of plastics that finally reached the reprocessors were mixed plastic bottles and mixed plastics.
Asunto(s)
Plásticos , Reciclaje , Eliminación de Residuos , Inglaterra , Embalaje de Productos , Administración de ResiduosRESUMEN
This paper presents an integrated modelling approach for value assessments, focusing on resource recovery from waste. The method tracks and forecasts a range of values across environmental, social, economic and technical domains by attaching these to material-flows, thus building upon and integrating unidimensional models such as material flow analysis (MFA) and lifecycle assessment (LCA). We argue that the usual classification of metrics into these separate domains is useful for interpreting the outputs of multidimensional assessments, but unnecessary for modelling. We thus suggest that multidimensional assessments can be better performed by integrating the calculation methods of unidimensional models rather than their outputs. To achieve this, we propose a new metric typology that forms the foundation of a multidimensional model. This enables dynamic simulations to be performed with material-flows (or values in any domain) driven by changes in value in other domains. We then apply the model in an illustrative case highlighting links between the UK coal-based electricity-production and concrete/cement industries, investigating potential impacts that may follow the increased use of low-carbon fuels (biomass and solid recovered fuels; SRF) in the former. We explore synergies and trade-offs in value across domains and regions, e.g. how changes in carbon emissions in one part of the system may affect mortality elsewhere. This highlights the advantages of recognising complex system dynamics and making high-level inferences of their effects, even when rigorous analysis is not possible. We also indicate how changes in social, environmental and economic 'values' can be understood as being driven by changes in the technical value of resources. Our work thus emphasises the advantages of building fully integrated models to inform conventional sustainability assessments, rather than applying hybrid approaches that integrate outputs from parallel models. The approach we present demonstrates that this is feasible and lays the foundations for such an integrated model.
RESUMEN
Over the last 60 years plastics production has increased manifold, owing to their inexpensive, multipurpose, durable and lightweight nature. These characteristics have raised the demand for plastic materials that will continue to grow over the coming years. However, with increased plastic materials production, comes increased plastic material wastage creating a number of challenges, as well as opportunities to the waste management industry. The present overview highlights the waste management and pollution challenges, emphasising on the various chemical substances (known as "additives") contained in all plastic products for enhancing polymer properties and prolonging their life. Despite how useful these additives are in the functionality of polymer products, their potential to contaminate soil, air, water and food is widely documented in literature and described herein. These additives can potentially migrate and undesirably lead to human exposure via e.g. food contact materials, such as packaging. They can, also, be released from plastics during the various recycling and recovery processes and from the products produced from recyclates. Thus, sound recycling has to be performed in such a way as to ensure that emission of substances of high concern and contamination of recycled products is avoided, ensuring environmental and human health protection, at all times.
RESUMEN
This paper addresses a major problem in international solid waste management, which is twofold: a lack of data, and a lack of consistent data to allow comparison between cities. The paper presents an indicator set for integrated sustainable waste management (ISWM) in cities both North and South, to allow benchmarking of a city's performance, comparing cities and monitoring developments over time. It builds on pioneering work for UN-Habitat's solid waste management in the World's cities. The comprehensive analytical framework of a city's solid waste management system is divided into two overlapping 'triangles' - one comprising the three physical components, i.e. collection, recycling, and disposal, and the other comprising three governance aspects, i.e. inclusivity; financial sustainability; and sound institutions and proactive policies. The indicator set includes essential quantitative indicators as well as qualitative composite indicators. This updated and revised 'Wasteaware' set of ISWM benchmark indicators is the cumulative result of testing various prototypes in more than 50 cities around the world. This experience confirms the utility of indicators in allowing comprehensive performance measurement and comparison of both 'hard' physical components and 'soft' governance aspects; and in prioritising 'next steps' in developing a city's solid waste management system, by identifying both local strengths that can be built on and weak points to be addressed. The Wasteaware ISWM indicators are applicable to a broad range of cities with very different levels of income and solid waste management practices. Their wide application as a standard methodology will help to fill the historical data gap.