RESUMEN
Perfluorooctanoic acid (PFOA) is an artificial chemical of global concern due to its high environmental persistence and potential human health risk. Electrochemical methods are promising technologies for water treatment because they are efficient, cheap, and scalable. The electrochemical reduction of PFOA is one of the current methodologies. This process leads to defluorination of the carbon chain to hydrogenated products. Here, we describe a mechanistic study of the electrochemical reduction of PFOA in gold electrodes. By using linear sweep voltammetry (LSV), an E0' of -1.80 V vs Ag/AgCl was estimated. Using a scan rate diagnosis, we determined an electron-transfer coefficient (αexp) of 0.37, corresponding to a concerted mechanism. The strong adsorption of PFOA into the gold surface is confirmed by the Langmuir-like isotherm in the absence (KA = 1.89 × 1012 cm3 mol-1) and presence of a negative potential (KA = 3.94 × 107 cm3 mol-1, at -1.40 V vs Ag/AgCl). Based on Marcus-Hush's theory, calculations show a solvent reorganization energy (λ0) of 0.9 eV, suggesting a large electrostatic repulsion between the perfluorinated chain and water. The estimated free energy of the transition state of the electron transfer (ΔG = 2.42 eV) suggests that it is thermodynamically the reaction-limiting step. 19F - 1H NMR, UV-vis, and mass spectrometry studies confirm the displacement of fluorine atoms by hydrogen. Density functional theory (DFT) calculations also support the concerted mechanism for the reductive defluorination of PFOA, in agreement with the experimental values.
RESUMEN
Electrochemical water splitting offers the potential for environmentally friendly hydrogen and oxygen gas generation. Here, we present the synthesis, characterization, and electrochemical analyses of four organic polymers where metalloporphyrins are the active center nodes. These materials were obtained from the polymerization reaction of poly(p-phenylene terephtalamide) (PPTA) with the respective amino-functionalized metalloporphyrins, where M = Fe, 1; Co, 2; Ni, 3; Cu, 4. Scanning and transmission electron microscopy images (SEM and TEM) show that these polymers exhibit a layer-type morphology, which is attributed to hydrogen bonding and π-π stacking between the metalloporphyrin nodes. The synthesized materials were characterized by X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), UV-Vis spectroscopy, and Fourier-transform infrared spectroscopy (FT-IR). Among the materials studied, the cobalt-based polymer, 2, demonstrates a bifunctional electrocatalytic activity for oxygen (OER) and hydrogen (HER) evolution reactions with overpotentials (η10) of 337 mV and 435 mV, respectively. The Fe, 1, and Ni, 2, polymers are less active for HER with maximum current densities (jmax) of 12.6 and 19.1 mA cm-2 and η10 678 mV, 644 mV. Polymer 2 achieves a jmax of 37.7 mA cm-2 for HER and 133 mA cm-2 for OER. The copper-based material, 4, on the other hand, shows selectivity towards HER with an overpotential (η) of 436 mV and a maximum current density (j) of 45.5 mA cm-2. The bifunctional electrocatalytic performance was tested in the overall water-splitting setup, where polymer 2 requires a cell voltage of 1.64 V at 10 mA cm-2. This work presents a novel approach to heterogenized molecular systems, providing materials with exceptional structural characteristics and enhanced electrocatalytic capabilities.
RESUMEN
The unavoidable and detrimental formation of silica scale in engineered processes necessitates the urgent development of effective, economic, and sustainable strategies for dissolved silica removal from water. Herein, we demonstrate a rapid, chemical-free, and selective silica removal method using electrosorption. Specifically, we confirm the feasibility of exploiting local pH dynamics at the electrodes in flow-through electrosorption, achieved through a counterintuitive cell configuration design, to induce ionization and concomitant electrosorption of dissolved silica. In addition, to improve the feasibility of silica electrosorption under high-salinity solutions, we developed a silica-selective anode by functionalizing porous activated carbon cloths with aluminum hydroxide nanoparticles (Al(OH)3-p-ACC). The modification markedly enhances silica sorption capacity (2.8 vs 1.1 mgsilica ganode-1) and reduces the specific energy consumption (13.3 vs 19.8 kWh kgsilica-1). Notably, the modified electrode retains remarkable silica sorption capacity even in the presence of high concentrations of co-occurring ions (up to 100 mM NaCl). The mechanisms underlying the superior silica removal stability and selectivity with the Al(OH)3-p-ACC electrode are also elucidated, revealing a synergistic interaction involving outer-sphere and inner-sphere complexation between dissolved silica and Al(OH)3 nanoparticles on the electrodes. Moreover, we find that effective regeneration of the electrodes may be achieved by applying a reverse potential during discharge, although complete regeneration of the modified electrodes may necessitate alternative materials or process optimization. We recommend the adoption of feedwater-specific designs for the development of future silica-selective electrodes in electrosorption capable of meeting silica removal demands across a wide range of engineered systems.
Asunto(s)
Purificación del Agua , Agua , Dióxido de Silicio , Estudios de Factibilidad , Cloruro de Sodio , ElectrodosRESUMEN
Electron spin polarization is identified as a promising avenue for enhancing the oxygen evolution reaction (OER), which is the bottleneck that limits the energy efficiency of water-splitting. Here, we report that both ferrimagnetic (f-Fe3O4) and superparamagnetic iron oxide (s-Fe3O4) catalysts can exhibit external magnetic field (Hext)-induced OER enhancement, and the activity is proportional to their intrinsic magnetic moment. Additionally, the chirality-induced spin selectivity (CISS) effect was utilized in synergy with Hext to get a maximum enhancement of up to 89% improvement in current density (at 1.8 V vs RHE) with a low onset potential of 270 mV in s-Fe3O4 catalysts. Spin polarization and the resultant spin selectivity suppress the production of H2O2 and promote the formation of ground state triplet O2 during the OER. Furthermore, the design of chiral s-Fe3O4 with synergistic spin potential effect demonstrates a high spin polarization of â¼42%, as measured using conductive atomic force microscopy (c-AFM).
RESUMEN
Increased gas adsorption in a series of post-synthetically modified metal-organic frameworks (MOFs) of the type HKUST-1 was achieved by the partial cation exchange process. Manipulation of post-synthetic conditions demonstrates high tunability in the site substitution and gas adsorption properties during the dynamic equilibrium process. In this work, post-synthetic modification of Cu3(BTC)2 is carried on by exposure to TM2+ solutions (TM = Mn, Fe, Co, Ni) at different time intervals. The crystal structure, composition, and morphology were studied by powder X-ray diffraction, Fourier-transform infrared spectroscopy, inductively coupled plasma optical emission spectroscopy, and scanning electron microscopy. Structural analysis supports the retention of the crystal structure and partial substitution of the Cu metal nodes within the framework. A linear increase in the transmetalation process is observed with Fe and Co with a maximum percentage of 39 and 18%, respectively. Conversely, relatively low cation exchange is observed with Mn having a maximum percentage of 2.40% and Ni with only 2.02%. Gas adsorption measurements and surface area analysis were determined for each species. Interestingly, (Cu/Mn)3(BTC)2 revealed the highest CO2 adsorption capacity of 5.47 mmol/g, compared to 3.08 mmol/g for Cu3(BTC)2. The overall increased gas adsorption can be attributed to the formation of defects in the crystal structure during the cation exchange process. These results demonstrate the outstanding potential of post-synthetic ion exchange as a general approach to fine-tuning the physical properties of existing MOF architectures.
RESUMEN
Eradication of biofilms that may harbor pathogens in water distribution systems is an elusive goal due to limited penetration of residual disinfectants. Here, we explore the use of engineered filamentous coliphage M13 for enhanced biofilm affinity and precise delivery of lytic polyvalent phages (i.e., broad-host-range phages lysing multiple host strains after infection). To promote biofilm attachment, we modified the M13 major coat protein (pVIII) by inserting a peptide sequence with high affinity for Pseudomonas aeruginosa (P. aeruginosa) extracellular polysaccharides (commonly present on the surface of biofilms in natural and engineered systems). Additionally, we engineered the M13 tail fiber protein (pIII) to contain a peptide sequence capable of binding a specific polyvalent lytic phage. The modified M13 had 102- and 5-fold higher affinity for P. aeruginosa-dominated mixed-species biofilms than wildtype M13 and unconjugated polyvalent phage, respectively. When applied to a simulated water distribution system, the resulting phage conjugates achieved targeted phage delivery to the biofilm and were more effective than polyvalent phages alone in reducing live bacterial biomass (84 vs 34%) and biofilm surface coverage (81 vs 22%). Biofilm regrowth was also mitigated as high phage concentrations induced residual bacteria to downregulate genes associated with quorum sensing and extracellular polymeric substance secretion. Overall, we demonstrate that engineered M13 can enable more accurate delivery of polyvalent phages to biofilms in flow-through systems for enhanced biofilm control.
Asunto(s)
Bacteriófagos , Bacteriófagos/genética , Matriz Extracelular de Sustancias Poliméricas , Biopelículas , Pseudomonas aeruginosa , Colifagos , Péptidos/farmacología , Polisacáridos/farmacología , AguaRESUMEN
Water splitting is considered a promising approach for renewable and sustainable energy conversion. The development of water splitting electrocatalysts that have low-cost, long-lifetime, and high-performance is an important area of research for the sustainable generation of hydrogen and oxygen gas. Here, we report a metal-free porphyrin-based two-dimensional crystalline covalent organic polymer obtained from the condensation of terephthaloyl chloride and 5,10,15,20-tetrakis(4-aminophenyl) porphyrin which is stabilized by an extensive hydrogen bonding network. This material exhibits bifunctional electrocatalytic performance towards water splitting with onset overpotentials, η, of 36 mV and 110 mV for HER (in 0.5 M H2SO4) and OER (in 1.0 M KOH), respectively. The as-synthesized material is also able to perform water splitting in neutral phosphate buffer saline solution, with 294 mV for HER and 520 mV for OER, respectively. Characterized by electrochemical impedance spectroscopy (EIS) and chronoamperometry, the as-synthesized material also shows enhanced conductivity and stability compared to its molecular counterpart. Inserting a non-redox active zinc metal center in the porphyrin unit leads to a decrease in electrochemical activity towards both HER and OER, suggesting the four-nitrogen porphyrin core is the active site. The high performance of this metal-free material towards water splitting provides a sustainable alternative to the use of scarce and expensive metal electrocatalysts in energy conversion for industrial applications.
RESUMEN
Due to their persistent and pervasive distribution and their adverse effects on human health, the removal of per- and polyfluoroalkyl substances (PFAS) from the environment has been the focus of current research. Recent studies have shown that engineered nanomaterials provide great opportunities for their removal by chemical, physical and electrochemical adsorption methods, or as photo- or electrocatalysts that promote their degradation. This review summarizes and discusses the performance of recently reported nanomaterials towards PFAS removal in water treatment applications. We discuss the performance, mechanisms, and PFAS removal conditions of a variety of nanomaterials, including carbon-based, non-metal, single-metal, and multi-metal nanomaterials. We show that nanotechnology provides significant opportunities for PFAS remediation and further nanomaterial development can provide solutions for the removal of PFAS from the environment. We also provide an overview of the current challenges.
Asunto(s)
Fluorocarburos , Nanoestructuras , Contaminantes Químicos del Agua , Purificación del Agua , Adsorción , Fluorocarburos/análisis , Humanos , Contaminantes Químicos del Agua/análisisRESUMEN
Clean water is critical for drinking, industrial processes, and aquatic organisms. Existing water treatment and infrastructure are chemically-intensive and based on nearly century-old technologies that fail to meet modern large and decentralized communities. The next-generation of water processes can transition from outdated technologies by utilizing nanomaterials to harness energy from across the electromagnetic spectrum, enabling electrified and solar-based technologies. The last decade was marked by tremendous improvements in nanomaterial design, synthesis, characterization, and assessment of material properties. Realizing the benefits of these advances requires placing greater attention on embedding nanomaterials onto and into surfaces within reactors and applying external energy sources. This will allow nanomaterial-based processes to replace Victorian-aged, chemical intensive water treatment technologies.
RESUMEN
Nano-sized hematite (α-Fe2O3) is not well suited for magnetic heating via an alternating magnetic field (AMF) because it is not superparamagnetic-at its best, it is weakly ferromagnetic. However, manipulating the magnetic properties of nano-sized hematite (i.e., magnetic saturation (Ms), magnetic remanence (Mr), and coercivity (Hc)) can make them useful for nanomedicine (i.e., magnetic hyperthermia) and nanoelectronics (i.e., data storage). Herein we study the effects of size, shape, and crystallinity on hematite nanoparticles to experimentally determine the most crucial variable leading to enhancing the radio frequency (RF) heating properties. We present the synthesis, characterization, and magnetic behavior to determine the structure-property relationship between hematite nano-magnetism and RF heating. Increasing particle shape anisotropy had the largest effect on the specific adsorption rate (SAR) producing SAR values more than 6 × greater than the nanospheres (i.e., 45.6 ± 3 W/g of α-Fe2O3 nanorods vs. 6.89 W/g of α-Fe2O3 nanospheres), indicating α-Fe2O3 nanorods can be useful for magnetic hyperthermia.
RESUMEN
A series of highly efficient adsorbents were developed using Ni3(BTC)2 and Co3(BTC)2 metal-organic frameworks (MOFs) and Fe3O4 magnetic nanoparticles (MNPs) to functionalize graphene oxide (GO). XRD results show high crystallinity of the prepared nanomaterials and the successful decoration of Ni3(BTC)2 and Co3(BTC)2 MOFs over the GO substrate (BTC = benzene-1,3,5-tricarboxylic acid). SEM and TEM imaging show the successful formation of nanoscale MOFs and Fe3O4 MNPs over GO. IR spectroscopy supports the characterization and successful preparation of the Fe3O4/MOF@GO hybrid composite nanoadsorbents. The prepared composite nanoadsorbents were used to sorb Methylene Blue (MB) as a model for common organic pollutants in water and common ions (Na+, Ca2+, Mg2+, SO42-, SiO32-) from a brackish water model. The adsorbed concentration at equilibrium of MB of the prepared composite nanoadsorbents increases by an average of 30.52 and 13.75 mg/g for the Co and Ni composite, respectively, when compared to the MOFs parent materials. The adsorbed amount of sulfate ions increases by 92.1 mg/g for the Co composite and 112.1 mg/g for the Ni composite, when compared to graphene oxide. This adsorption enhancement is attributed to suppressed aggregation through increased dispersive forces in the MOFs due to the presence of GO, formation of nanoscale MOFs over the GO platform, and the hindering of stacking of the graphene layers by the MOFs. Leaching tests show that the release of Co and Ni ions to water is reduced from 105.2 and 220 mg/L, respectively, in the parent MOF materials to 0.5 and 16.4 mg/L, respectively, in the composite nanoadsorbents. These findings show that the newly developed composite nanoadsorbents can sorb organic pollutants, and target sulfate and silicate anions, which makes them suitable candidates for water and wastewater treatments.
RESUMEN
We report the synthesis and characterization of a series of dimolybdenum paddlewheel complexes of the type Mo2(DAniF)4-n(hpp)n (n = 1-3), where DAniF is the anion of N,N'-di-p-anisyl-formamidine and hpp is the anion of 1,3,4,6,7,8-hexahydro-2H-pyrimido[1,2-a]pyrimidine. The effect on the electronic structure of these tetragonal paddlewheel dimolybdenum compounds was studied upon systematic substitution of formamidinate ligands by the more basic guanidinates. Mo-Mo distances in the paddlewheel structures decreased upon guanidinate ligand substitution, and were found to be 2.0844(6) and 2.0784(6), for Mo2(DAniF)3(hpp) (1) and trans-Mo2(DAniF)2(hpp)2 (2), respectively. Electrochemical studies show that the half-wave potential of the Mo25+/Mo24+ couple shifts cathodically upon ancillary ligand substitution ranging from -0.286 V for the tetraformamidinate complex to -1.795 V for the tetraguanidinate analogue and with redox potentials of -0.75, -1.07, and -1.14 V for 1, 2, and 3 (Mo2(DAniF)(hpp)3), respectively. The presence of a second redox event assigned to the Mo26+/Mo25+ couple was not observed until two guanidinate ligands were introduced. Raman spectroscopy shows that the v(M-M) stretch gets systematically strengthened upon formamidinate ligand substitution by the guanidinate ligand hpp. The induced delta bond destabilization by the basic hpp ligand was measured using DFT calculations by tracking the energy of the frontier orbitals. The decrease in the HOMO-LUMO energy gap was supported by the red shift in the UV-vis spectra of the compounds: 412, 442, and 450 nm for 1, 2, and 3, respectively.
RESUMEN
Composite magnetic aluminum hydroxide at iron oxide nanomaterials, Al(OH)3@Fe3O4, with a well-defined core-shell structure, were used as pretreatment adsorbents for the removal of silica in brackish water. The Al(OH)3 outer shell confers silica adsorption capacity, and the superparamagnetic Fe3O4 core allows material separation and magnetic recovery. The as-prepared nanomaterials (2 g L-1) remove â¼95 and â¼80% silica from Si-rich solutions with 0.5 and 2 mM initial silica concentrations, respectively. Regeneration under basic conditions was evaluated, and post-adsorption treatment with 0.05 M NaOH yielded optimal material reusability. After four regeneration cycles, the Al(OH)3@Fe3O4 nanomaterials retain their magnetic property while still being able to remove â¼40% silica from solutions at an adsorbent concentration of 2 g L-1. The mechanism of silica adsorption onto the surface of the nanomaterials was probed using several spectroscopic techniques. ATR-FTIR (attenuated total reflection-Fourier transform infrared) integrated with two-dimensional correlation analysis shows that silica species vary from Q2 to Q4 with adsorption time corresponding to silica polymerization. 29Si solid-state NMR spectra show an upfield chemical shift displacement of the Q2 signal, which indicates the formation of Q4 units, suggesting silica polymerization onto the Al(OH)3 shell. In addition, a laboratory-scale reverse osmosis setup was used to evaluate Al(OH)3@Fe3O4 as pretreatment materials for silica removal. Results show that silica scaling was significantly alleviated, and water recovery was enhanced when feed waters were pretreated with the magnetic nanomaterials. Taken together, our study highlights the promise of magnetic Al(OH)3@Fe3O4 nanomaterials in treating brackish water and achieving higher water recovery for inland desalination.
Asunto(s)
Dióxido de Silicio , Contaminantes Químicos del Agua , Adsorción , Aluminio , Hierro , ÓsmosisRESUMEN
No other resource is as necessary for life as water, and providing it universally in a safe, reliable and affordable manner is one of the greatest challenges of the twenty-first century. Here, we consider new opportunities and approaches for the application of nanotechnology to enhance the efficiency and affordability of water treatment and wastewater reuse. Potential development and implementation barriers are discussed along with research needs to overcome them and enhance water security.
RESUMEN
Herein, we report a crystalline CoTcPP-based [TcPP = the anion of meso-tetra(4-carboxyphenyl)porphyrin] polymeric system, 1, as a hydrogen evolution reaction (HER) electrocatalyst in acidic aqueous media. The material was characterized by powder X-ray diffraction (p-XRD), Fourier transform infrared (FT-IR) spectroscopy, and energy dispersive X-ray (EDX) analysis and its morphology was probed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Polymer 1 shows a surface area of 441.74 m3 g-1, while the discrete CoTcPP molecule (2) shows a surface area of 3.44 m3 g-1. The HER catalytic performance was evaluated by means of linear sweep voltammetry in the presence of 0.5 M H2SO4 aqueous solution. To achieve 10 mA cm-2 cathodic current density, 1 and 2 respectively require an overpotential of 0.475 V and 0.666 V, providing strong evidence that the extended network of cobalt-based porphyrin leads to enhanced HER efficiency. The polymer also shows great tolerance for HER electrolysis in the presence of an acid remaining active over 10 hours.
RESUMEN
Free-base meso-tetra(pentafluorophenyl)porphyrin, 1, is electrocatalytically active for hydrogen gas generation in the presence of p-toluenesulfonic acid. The electrochemical potential of hydrogen evolution (-1.31 V vs. Fc/Fc+ in THF) is comparable to those of metal containing electrocatalysts such as metallated porphyrins or other metallated macrocycles. Combining experimental observations and DFT computations, we propose the most favorable hydrogen generation mechanism to be a (1) reduction, (2) protonation, (3) reduction, (4) protonation (E-P-E-P) pathway.
RESUMEN
After more than 50 years, the synthesis and electronic structure of the first and only reported "U0 complex" [U(bipy)4 ] (1) has been reinvestigated. Additionally, its one-electron reduced product [Na(THF)6 ][U(bipy)4 ] (2) has been newly discovered. High resolution crystallographic analyses combined with magnetic and computational data show that 1 and its derivative 2 are best described as highly reduced species containing mid-to-high-valent uranium ligated by redox non-innocent ligands.
RESUMEN
Variable-temperature magnetic and structural data of two pairs of diruthenium isomers, one pair having an axial ligand and the formula Ru2(DArF)4Cl (where DArF is the anion of a diarylformamidine isomer and Ar = p-anisyl or m-anisyl) and the other one being essentially identical but devoid of axial ligands and having the formula [Ru2(DArF)4]BF4, show that the axial ligand has a significant effect on the electronic structure of the diruthenium unit. Variable temperature crystallographic and magnetic data as well as density functional theory calculations unequivocally demonstrate the occurrence of π interactions between the p orbitals of the chlorine ligand and the π* orbitals in the Ru2(5+) units. The magnetic and structural data are consistent with the existence of combined ligand σ/metal σ and ligand pπ/metal-dπ interactions. Electron paramagnetic resonance data show unambiguously that the unpaired electrons are in metal-based molecular orbitals.
RESUMEN
Although cisplatin is considered as an effective anti-cancer agent, it has shown limitations and may produce toxicity in patients. Therefore, we synthesized two cis-dichlorideplatinum(II) compounds (13 and 14) composed of meta- and para-N,N-diphenyl pyridineamine ligands through a reaction of the amine precursors and PtCl2 with respective yields of 16 and 47 %. We hypothesized that compounds 13 and 14, with lipophilic ligands, should transport efficiently in cancer cells and demonstrate more effectiveness than cisplatin. When tested for biological activity, compounds 13 and 14 were found to inhibit the growth of MCF 7 and MDA-MB-231 cells (IC50s 1 ± 0.4 µM and 1 ± 0.2 µM for 13 and 14, respectively, and IC50 7.5 ± 1.3 µM for compound 13 and 1 ± 0.3 µM for compound 14). Incidentally, these doses were found to be lower than cisplatin doses (IC50 5 ± 0.7 µM for MCF 7 and 10 ± 1.1 µM for MDA-MB-231). Similar to cisplatin, 13 and 14 interacted with DNA and induced apoptosis. However, unlike cisplatin, they blocked the migration of MDA-MB-231 cells suggesting that in addition to apoptotic and DNA-binding capabilities, these compounds are useful in blocking the metastatic migration of breast cancer cells. To delineate the mechanism of action, computer-aided analyses (DFT calculations) were conducted for compound 13. Results indicate that in vivo, the pyridineamine ligands are likely to dissociate from the complex, forming a platinum DNA adduct with anti-proliferative activity. These results suggest that complexes 13 and 14 hold promise as potential anti-cancer agents.
Asunto(s)
Aminopiridinas/química , Antineoplásicos/síntesis química , Antineoplásicos/farmacología , Neoplasias de la Mama/patología , Compuestos Organoplatinos/síntesis química , Compuestos Organoplatinos/farmacología , Antineoplásicos/química , Proliferación Celular/efectos de los fármacos , Supervivencia Celular/efectos de los fármacos , Cristalografía por Rayos X , Relación Dosis-Respuesta a Droga , Ensayos de Selección de Medicamentos Antitumorales , Humanos , Células MCF-7 , Modelos Moleculares , Estructura Molecular , Compuestos Organoplatinos/química , Relación Estructura-Actividad , Células Tumorales CultivadasRESUMEN
Metal complexes of derivatized 2,12-dimethyl-3,7,11,17-tetraazabicyclo[11.3.1]heptadeca-1(17),2,11,13,15-pentane (bapa) ligands were prepared from 4-substituted diacetylpyridine derivatives by templated condensation with 3,3'-diaminodipropylamine in the presence of a metal halide or nitrate. The diacetylpyridine derivatives with Pacman and Hangman scaffolds are delivered from borylation of the 4-postion of diacetylpyridine and subsequent Suzuki coupling with the appropriate Hangman or Pacman backbone. Electrochemical examination of the parent [Co(bapa)](2+) scaffold reveals it to be a catalyst for the hydrogen evolution reaction (HER) in acetonitrile. Similar studies of the Hangman complex appear to be obscured by trace amounts of residual palladium remaining from the Suzuki coupling reaction to provide a cautionary note for the use of such cross-coupling methodologies in the preparation of HER catalysts.