RESUMEN
BACKGROUND: Sporicidal products containing hydrogen peroxide (HP), peracetic acid (PAA), and acetic acid (AA) are used widely in multiple industries, including healthcare. Despite widespread use in healthcare, few studies have assessed associations between exposures to HP, PAA, and AA, and work-related symptoms in these settings. METHODS: In 2018, we performed a health and exposure assessment at a hospital where a sporicidal product consisting of HP, PAA, and AA, was used as the primary cleaner on hospital surfaces. We collected 56 personal and mobile air samples for HP, PAA, and AA on participants while they performed their regular cleaning duties; collected area samples for HP (n = 28), PAA (n = 28), and AA (n = 70) in multiple hospital locations where cleaning was performed; and administered a postshift survey to assess eye, skin, and upper and lower airway symptoms that occurred cross-shift or in the previous 4 weeks. RESULTS: Full-shift exposure levels for HP (range: <3-559 ppb), PAA (range: <0.2-8 ppb), and AA (range: <5-915 ppb) were all below US occupational exposure limits. We observed positive associations (p < 0.05) between shift, departmental average, and departmental 95th percentile exposures to HP, PAA, and AA vapors, and work-related acute (cross-shift) and chronic (previous 4 weeks) eye, upper airway, and lower airway symptoms after adjusting for age, gender, smoking status, use of other cleaning products containing sensitizers and irritants, allergic status, and stress. CONCLUSIONS: Our observations of work-related upper and lower airway symptoms among hospital workers exposed to vapors from a sporicidal product containing HP, PAA, and AA indicate a need for a combination of engineering, administrative, and PPE controls to reduce exposure. Additionally, alternative nonchemical disinfection technologies should be further investigated as a means to simultaneously reduce healthcare workers' exposure to disinfectants while also minimizing costly healthcare-acquired infections.
Asunto(s)
Desinfectantes , Ácido Peracético , Humanos , Ácido Acético , Peróxido de Hidrógeno , Personal de HospitalAsunto(s)
Café , Exposición Profesional , Estudios Transversales , Humanos , Exposición Profesional/análisisRESUMEN
Coffee production workers are exposed to complex mixtures of gases, dust, and vapors, including the known respiratory toxins, diacetyl, and 2,3-pentanedione, which occur naturally during coffee roasting and are also present in flavorings used to flavor coffee. This study evaluated the associations of these two α-diketones with lung function measures in coffee production workers. Workers completed questionnaires, and their lung function was assessed by spirometry and impulse oscillometry (IOS). Personal exposures to diacetyl, 2,3-pentanedione, and their sum (SumDA+PD) were assigned to participants, and metrics of the highest 95th percentile (P95), cumulative, and average exposure were calculated. Linear and logistic regression models for continuous and binary/polytomous outcomes, respectively, were used to explore exposure-response relationships adjusting for age, body mass index, tenure, height, sex, smoking status, race, or allergic status. Decrements in percent predicted forced expiratory volume in 1 second (ppFEV1) and forced vital capacity (ppFVC) were associated with the highest-P95 exposures to 2,3-pentanedione and SumDA+PD. Among flavoring workers, larger decrements in ppFEV1 and ppFVC were associated with highest-P95 exposures to diacetyl, 2,3-pentanedione, and SumDA+PD. Abnormal FEV1, FVC, and restrictive spirometric patterns were associated with the highest-P95, cumulative, and average exposures for all α-diketone metrics; some of these associations were also present among flavoring and non-flavoring workers. The combined category of small and peripheral airways plus small and large airways abnormalities on IOS had elevated odds for highest-P95 exposure to α-diketones. These results may be affected by the small sample size, few cases of abnormal spirometry, and the healthy worker effect. Associations between lung function abnormalities and exposure to α-diketones suggest it may be prudent to consider exposure controls in both flavoring and non-flavoring settings.
Asunto(s)
Diacetil , Exposición Profesional , Aromatizantes , Humanos , Pulmón , PentanonasRESUMEN
Coffee production workers can be exposed to inhalational hazards including alpha-diketones such as diacetyl and 2,3-pentanedione. Exposure to diacetyl is associated with the development of occupational lung disease, including obliterative bronchiolitis, a rare and irreversible lung disease. We aimed to identify determinants contributing to task-based exposures to diacetyl and 2,3-pentanedione at 17 U.S. coffee production facilities. We collected 606 personal short-term task-based samples including roasting (n = 189), grinding (n = 74), packaging (n = 203), quality control (QC, n = 44), flavoring (n = 15), and miscellaneous production/café tasks (n = 81), and analyzed for diacetyl and 2,3-pentanedione in accordance with the modified OSHA Method 1013/1016. We also collected instantaneous activity-based (n = 296) and source (n = 312) samples using evacuated canisters. Information on sample-level and process-level determinants relating to production scale, sources of alpha-diketones, and engineering controls was collected. Bayesian mixed-effect regression models accounting for censored data were fit for overall data (all tasks) and specific tasks. Notable determinants identified in univariate analyses were used to fit all plausible models in multiple regression analysis which were summarized using a Bayesian model averaging method. Grinding, flavoring, packaging, and production tasks with ground coffee were associated with the highest short-term and instantaneous-activity exposures for both analytes. Highest instantaneous-sources of diacetyl and 2,3-pentanedione included ground coffee, flavored coffee, liquid flavorings, and off-gassing coffee bins or packages. Determinants contributing to higher exposures to both analytes in all task models included sum of all open storage sources and average percent of coffee production as ground coffee. Additionally, flavoring ground coffee and flavoring during survey contributed to notably higher exposures for both analytes in most, but not all task groups. Alternatively, general exhaust ventilation contributed to lower exposures in all but two models. Additionally, among facilities that flavored, local exhaust ventilation during flavoring processes contributed to lower 2,3-pentanedione exposures during grinding and packaging tasks. Coffee production facilities can consider implementing additional exposure controls for processes, sources, and task-based determinants associated with higher exposures to diacetyl and 2,3-pentanedione, such as isolating, enclosing, and directly exhausting grinders, flavoring mixers, and open storage of off-gassing whole bean and ground coffee, to reduce exposures and minimize risks for lung disease among workers.
Asunto(s)
Café , Diacetil , Enfermedades Pulmonares , Exposición Profesional , Pentanonas , Teorema de Bayes , Diacetil/análisis , Aromatizantes/análisis , Humanos , Exposición Profesional/análisis , Pentanonas/análisisRESUMEN
Electronic cigarette, or vaping, products are used to heat an e-liquid to form an aerosol (liquid droplets suspended in gas) that the user inhales; a portion of this aerosol deposits in their respiratory tract and the remainder is exhaled, thereby potentially creating opportunity for secondhand exposure to bystanders (e.g., in homes, automobiles, and workplaces). Particle size, a critical factor in respiratory deposition (and therefore potential for secondhand exposure), could be influenced by e-liquid composition. Hence, the purposes of this study were to (1) test the influence of laboratory-prepared e-liquid composition [ratio of propylene glycol (PG) to vegetable glycerin (VG) humectants, nicotine, and flavorings] on particle size distribution and (2) model respiratory dosimetry. All e-liquids were aerosolized using a second-generation reference e-cigarette. We measured particle size distribution based on mass using a low-flow cascade impactor (LFCI) and size distribution based on number using real-time mobility sizers. Mass median aerodynamic diameters (MMADs) of aerosol from e-liquids that contained only humectants were significantly larger compared with e-liquids that contained flavorings or nicotine (p = 0.005). Humectant ratio significantly influenced MMADs; all aerosols from e-liquids prepared with 70:30 PG:VG were significantly larger compared with e-liquids prepared with 30:70 PG:VG (p = 0.017). In contrast to the LFCI approach, the high dilution and sampling flow rate of a fast mobility particle sizer strongly influenced particle size measurements (i.e., all calculated MMAD values were < 75 nm). Dosimetry modeling using LFCI data indicated that a portion of inhaled particles will deposit throughout the respiratory tract, though statistical differences in aerosol MMADs among e-liquid formulations did not translate into large differences in deposition estimates. A portion of inhaled aerosol will be exhaled and could be a source for secondhand exposure. Use of laboratory-prepared e-liquids and a reference e-cigarette to standardize aerosol generation and a LFCI to measure particle size distribution without dilution represents an improved method to characterize physical properties of volatile aerosol particles and permitted determination of MMAD values more representative of e-cigarette aerosol in situ, which in turn, can help to improve dose modeling for users and bystanders.
Asunto(s)
Sistemas Electrónicos de Liberación de Nicotina , Fenómenos Fisiológicos Respiratorios , Aerosoles , Aromatizantes , Humanos , Higroscópicos , Nicotina , Tamaño de la Partícula , Sistema RespiratorioRESUMEN
Cleaning and disinfecting products consisting of a mixture of hydrogen peroxide (HP), peracetic acid (PAA), and acetic acid (AA) are widely used as sporicidal agents in health care, childcare, agricultural, food service, and food production industries. HP and PAA are strong oxidants and their mixture is a recognized asthmagen. However, few exposure assessment studies to date have measured HP, PAA, and AA in a health care setting. In 2015, we performed a health and exposure assessment at a hospital where a new sporicidal product, consisting of HP, PAA, and AA was introduced 16 months prior. We collected 49 full-shift time-weighted average (TWA) air samples and analyzed samples for HP, AA, and PAA content. Study participants were observed while they performed cleaning duties, and duration and frequency of cleaning product use was recorded. Acute upper airway, eye, and lower airway symptoms were recorded in a post-shift survey (n = 50). A subset of 35 cleaning staff also completed an extended questionnaire that assessed symptoms reported by workers as regularly occurring or as having occurred in the previous 12 months. Air samples for HP (range: 5.5 to 511.4 ppb) and AA (range: 6.7 to 530.3 ppb) were all below established US occupational exposure limits (OEL). To date, no full-shift TWA OEL for PAA has been established in the United States, however an OEL of 0.2 ppm has been suggested by several research groups. Air samples for PAA ranged from 1.1 to 48.0 ppb and were well below the suggested OEL of 0.2 ppm. Hospital cleaning staff using a sporicidal product containing HP, PAA, and AA reported work-shift eye (44%), upper airway (58%), and lower airway (34%) symptoms. Acute nasal and eye irritation were significantly positively associated with increased exposure to the mixture of the two oxidants: HP and PAA, as well as the total mixture (TM)of HP, PAA, and AA. Shortness of breath when hurrying on level ground or walking up a slight hill was significantly associated with increased exposure to the oxidant mixture (P = 0.017), as well as the TM (P = 0.026). Our results suggest that exposure to a product containing HP, PAA, and AA contributed to eye and respiratory symptoms reported by hospital cleaning staff at low levels of measured exposure.
Asunto(s)
Ácido Acético , Contaminantes Ocupacionales del Aire , Desinfectantes , Peróxido de Hidrógeno , Exposición Profesional , Ácido Peracético , Personal de Hospital/estadística & datos numéricos , Trastornos Respiratorios , Ácido Acético/análisis , Ácido Acético/toxicidad , Adulto , Contaminantes Ocupacionales del Aire/análisis , Contaminantes Ocupacionales del Aire/toxicidad , Desinfectantes/análisis , Desinfectantes/toxicidad , Femenino , Humanos , Peróxido de Hidrógeno/análisis , Peróxido de Hidrógeno/toxicidad , Masculino , Exposición Profesional/efectos adversos , Exposición Profesional/análisis , Ácido Peracético/análisis , Ácido Peracético/toxicidad , Trastornos Respiratorios/inducido químicamente , Trastornos Respiratorios/epidemiologíaRESUMEN
This method was designed for sampling select quaternary ammonium (quat) compounds in air or on surfaces followed by analysis using ultraperformance liquid chromatography tandem mass spectrometry. Target quats were benzethonium chloride, didecyldimethylammonium bromide, benzyldimethyldodecylammonium chloride, benzyldimethyltetradecylammonium chloride, and benzyldimethylhexadecylammonium chloride. For air sampling, polytetrafluoroethylene (PTFE) filters are recommended for 15-min to 24-hour sampling. For surface sampling, Pro-wipe® 880 (PW) media was chosen. Samples were extracted in 60:40 acetonitrile:0.1% formic acid for 1 hour on an orbital shaker. Method detection limits range from 0.3 to 2 ng/ml depending on media and analyte. Matrix effects of media are minimized through the use of multiple reaction monitoring versus selected ion recording. Upper confidence limits on accuracy meet the National Institute for Occupational Safety and Health 25% criterion for PTFE and PW media for all analytes. Using PTFE and PW analyzed with multiple reaction monitoring, the method quantifies levels among the different quats compounds with high precision (<10% relative standard deviation) and low bias (<11%). The method is sensitive enough with very low method detection limits to capture quats on air sampling filters with only a 15-min sample duration with a maximum assessed storage time of 103 days before sample extraction. This method will support future exposure assessment and quantitative epidemiologic studies to explore exposure-response relationships and establish levels of quats exposures associated with adverse health effects.
Asunto(s)
Cromatografía Liquida/métodos , Monitoreo del Ambiente/métodos , Contaminantes Ambientales/análisis , Compuestos de Amonio Cuaternario/análisis , Espectrometría de Masas en Tándem/métodos , Contaminantes Atmosféricos/análisis , Humanos , Límite de Detección , Estados UnidosRESUMEN
INTRODUCTION: Healthcare workers are at increased risk for respiratory disorders. The purpose of our respiratory health survey was to estimate the prevalence of current asthma and asthma-like symptoms and their association with workplace exposures and tasks among healthcare workers at a Veterans Administration (VA) Medical Center. MATERIAL AND METHODS: Information on respiratory health and work characteristics, including tasks performed, products used, and exposures, were collected by questionnaire from a convenience sample of workers employed at the VA Medical Center during 2012-2014. Associations of asthma and asthma-like symptoms with cleaning and disinfecting tasks and products as well as exposure to dampness and molds, and construction dust were evaluated using log-binomial regression. RESULTS: The prevalence of current asthma was 17.6% and almost half of all workers reported asthma-like symptoms. We observed elevated prevalence of current asthma among the VA healthcare workers compared to the U.S. general and working adult populations. Asthma and asthma-like symptoms were significantly associated with mold, dampness, and construction material exposures; cleaning and disinfecting products; and cleaning or disinfecting tasks. CONCLUSIONS: Workplace exposures and tasks associated with current asthma and asthma-like symptoms were identified but further research is needed to investigate the temporal association between workplace exposures and current asthma and asthma-like symptoms.
Asunto(s)
Asma/epidemiología , Personal de Salud/estadística & datos numéricos , Hospitales de Veteranos/estadística & datos numéricos , Adulto , Anciano , Materiales de Construcción , Tos , Detergentes , Disnea , Femenino , Administración Hospitalaria , Humanos , Humedad , Masculino , Persona de Mediana Edad , Atención al Paciente , Ruidos Respiratorios , Encuestas y Cuestionarios , Evaluación de Síntomas , Estados Unidos/epidemiología , United States Department of Veterans Affairs , Adulto JovenRESUMEN
BACKGROUND: Aluminum potroom exposure is associated with increased mortality of COPD but the association between potroom exposure and annual decline in lung function is unknown. We have measured lung volumes annually using spirometry from 1986 to 1996. The objective was to compare annual decline in forced expiratory volume in 1 s (dFEV1) and forced vital capacity (dFVC). METHODS: The number of aluminum potroom workers was 4,546 (81% males) and the number of workers in the reference group was 651 (76% males). The number of spirometries in the index group and the references were 24,060 and 2,243, respectively. RESULTS: After adjustment for confounders, the difference in dFEV1 and dFVC between the index and reference groups were 13.5 (P < 0.001) and -8.0 (P = 0.060) ml/year. CONCLUSION: Aluminum potroom operators have increased annual decline in FEV1 relative to a comparable group with non-exposure to potroom fumes and gases.
Asunto(s)
Aluminio , Volumen Espiratorio Forzado , Metalurgia , Enfermedades Profesionales/fisiopatología , Exposición Profesional/efectos adversos , Adulto , Contaminantes Ocupacionales del Aire/efectos adversos , Femenino , Humanos , Pulmón/fisiopatología , Enfermedades Pulmonares/etiología , Enfermedades Pulmonares/fisiopatología , Masculino , Persona de Mediana Edad , Noruega , Enfermedades Profesionales/etiología , Estudios Prospectivos , Espirometría , Capacidad Vital/fisiologíaRESUMEN
BACKGROUND: The Norwegian aluminum industry developed and implemented a protocol for prospective monitoring of employees' exposure using personal samplers. We analyzed these data to develop prediction lines to construct a job exposure matrix (JEM) for the period 1986-1995. METHODS: The protocol for personal monitoring of exposure was implemented in all seven Norwegian aluminum plants in 1986 and continued until 1995. Personal samplers were used to collect total dust, fluorides, and total polycyclic aromatic hydrocarbons (PAH). In addition, exposure could be categorized according to process, i.e. prebake, Søderberg, and 'other'. We constructed four-dimensional JEMs characterized by: Plant, Job descriptor, Process, and Year. Totally 8074, 6734, and 3524 measurements were available for dust, fluorides, and PAH, respectively. The data were analyzed using linear mixed models with two-way interactions. The models were assessed using the Akaike criterion (AIC) and unadjusted R (2). The significance level was set to 10% (two-sided) for retaining variables in the model. RESULTS: In 1986, the geometric mean (95% confidence interval in parentheses) for total dust, total fluorides, and PAH were 3.18 (0.46-22.2) mg m(-3), 0.58 (0.085-4.00) mg m(-3), and 33.9 (2.3-504) µg m(-3), respectively. During 10 years of follow-up, the exposure to total dust, fluorides, and PAH decreased by 9.2, 11.7, and 14.9% per year, respectively. Each model encompassed from 49 to 72 significant components of the interaction terms. The interaction components were at least as important as the main effects, and 65 to 91% of the significant components of the interaction terms were time-dependent. CONCLUSION: Our prediction models indicated that exposures were highly time-dependent. We expect that the time-dependent changes in exposure are of major importance for longitudinal studies of health effects in the aluminum industry.
Asunto(s)
Aluminio , Polvo/análisis , Fluoruros/análisis , Exposición por Inhalación/análisis , Metalurgia , Exposición Profesional/análisis , Hidrocarburos Policíclicos Aromáticos/análisis , Monitoreo del Ambiente/métodos , Femenino , Humanos , Masculino , Modelos Estadísticos , Noruega , Material Particulado , Estudios Prospectivos , Factores de TiempoRESUMEN
The present paper summarizes the outcome of the discussions at the First International Scientific Workshop on Harmonization of Strategies to Measure and Analyze Exposure to (Manufactured) Nano-objects in Workplace Air that was organized and hosted by the Netherlands Organization for Applied Scientific Research (TNO) and the Institute for Occupational Safety and Health of the German Social Accident Insurance (IFA) (Zeist, The Netherlands, December 2010). It reflects the discussions by 25 international participants in the area of occupational (nano) exposure assessment from Europe, USA, Japan, and Korea on nano-specific issues related to the three identified topics: (i) measurement strategies; (ii) analyzing, evaluating, and reporting of exposure data; and (iii) core information for (exposure) data storage. Preliminary recommendations were achieved with respect to (i) a multimetric approach to exposure assessment, a minimal set of data to be collected, and basic data analysis and reporting as well as (ii) a minimum set of contextual information to be collected and reported. Other issues that have been identified and are of great interest include (i) the need for guidance on statistical approaches to analyze time-series data and on electron microscopy analysis and its reporting and (ii) the need for and possible structure of a (joint) database to store and merge data. To make progress in the process of harmonization, it was concluded that achieving agreement among researchers on the preliminary recommendations of the workshop is urgent.