Simulating high-pressure surface reactions with molecular beams.

Using a reactive molecular beam with high kinetic energy (Ekin), it is possible to speed gas-surface reactions involving high activation barriers (Eact), which would require elevated pressures (P0) if a random gas with a Maxwell-Boltzmann distribution is used. By simply computing the number of molecules that overcome the activation barrier in a random gas at P0 and in a molecular beam at Ekin = Eact, we establish an Ekin-P0 equivalence curve, through which we postulate that molecular beams are ideal tools to investigate gas-surface reactions that involve high activation energies. In particular, we foresee the use of molecular beams to simulate gas surface reactions within the industrial-range (>10 bar) using surface-sensitive ultra-high vacuum (UHV) techniques, such as X-ray photoemission spectroscopy (XPS). To test this idea, we revisit the oxidation of the Cu(111) surface combining O2 molecular beams and XPS experiments. By tuning the kinetic energy of the O2 beam in the range of 0.24-1 eV, we achieve the same sequence of surface oxides obtained in ambient pressure photoemission (AP-XPS) experiments, in which the Cu(111) surface was exposed to a random O2 gas up to 1 mbar. We observe the same surface oxidation kinetics as in the random gas, but with a much lower dose, close to the expected value derived from the equivalence curve.

Estimating the Orientation of 4f Magnetic Moments by Classical Photoemission.

To use efficiently the magnetic functionalities emerging at the surfaces or interfaces of novel lanthanides-based materials, there is a need for complementary methods to probe the atomic-layer resolved magnetic properties. Here, we show that 4f photoelectron spectroscopy is highly sensitive to the collective orientation of 4f magnetic moments and, thus, a powerful tool for characterizing the related properties. To demonstrate this, we present the results of systematic study of a family of layered crystalline 4f-materials, which are crystallized in the body-centered tetragonal ThCr2Si2 structure. Analysis of 4f spectra indicates that the 4f moments at the surface experience a strong reorientation with respect to the bulk, caused by changes of the crystal-electric field. The presented database of the computed 4f spectra for all trivalent rare-earth ions in their different MJ states will facilitate the estimation of the orientation of the 4f magnetic moments in the layered 4f-systems for efficient control of their magnetic properties.

Interlayer Coupling of a Two-Dimensional Kondo Lattice with a Ferromagnetic Surface in the Antiferromagnet CeCo2P2.

The f-driven temperature scales at the surfaces of strongly correlated materials have increasingly come into the focus of research efforts. Here, we unveil the emergence of a two-dimensional Ce Kondo lattice, which couples ferromagnetically to the ordered Co lattice below the P-terminated surface of the antiferromagnet CeCo2P2. In its bulk, Ce is passive and behaves tetravalently. However, because of symmetry breaking and an effective magnetic field caused by an uncompensated ferromagnetic Co layer, the Ce 4f states become partially occupied and spin-polarized near the surface. The momentum-resolved photoemission measurements indicate a strong admixture of the Ce 4f states to the itinerant bands near the Fermi level including surface states that are split by exchange interaction with Co. The temperature-dependent measurements reveal strong changes of the 4f intensity at the Fermi level in accordance with the Kondo scenario. Our findings show how rich and diverse the f-driven properties can be at the surface of materials without f-physics in the bulk.

High-Quality Graphene Using Boudouard Reaction.

Following the game-changing high-pressure CO (HiPco) process that established the first facile route toward large-scale production of single-walled carbon nanotubes, CO synthesis of cm-sized graphene crystals of ultra-high purity grown during tens of minutes is proposed. The Boudouard reaction serves for the first time to produce individual monolayer structures on the surface of a metal catalyst, thereby providing a chemical vapor deposition technique free from molecular and atomic hydrogen as well as vacuum conditions. This approach facilitates inhibition of the graphene nucleation from the CO/CO2 mixture and maintains a high growth rate of graphene seeds reaching large-scale monocrystals. Unique features of the Boudouard reaction coupled with CO-driven catalyst engineering ensure not only suppression of the second layer growth but also provide a simple and reliable technique for surface cleaning. Aside from being a novel carbon source, carbon monoxide ensures peculiar modification of catalyst and in general opens avenues for breakthrough graphene-catalyst composite production.

Atomically-Precise Texturing of Hexagonal Boron Nitride Nanostripes.

Monolayer hexagonal boron nitride (hBN) is attracting considerable attention because of its potential applications in areas such as nano- and opto-electronics, quantum optics and nanomagnetism. However, the implementation of such functional hBN demands precise lateral nanostructuration and integration with other two-dimensional materials, and hence, novel routes of synthesis beyond exfoliation. Here, a disruptive approach is demonstrated, namely, imprinting the lateral pattern of an atomically stepped one-dimensional template into a hBN monolayer. Specifically, hBN is epitaxially grown on vicinal Rhodium (Rh) surfaces using a Rh curved crystal for a systematic exploration, which produces a periodically textured, nanostriped hBN carpet that coats Rh(111)-oriented terraces and lattice-matched Rh(337) facets with tunable width. The electronic structure reveals a nanoscale periodic modulation of the hBN atomic potential that leads to an effective lateral semiconductor multi-stripe. The potential of such atomically thin hBN heterostructure for future applications is discussed.

Extreme Biomimetics: Designing of the First Nanostructured 3D Spongin-Atacamite Composite and its Application.

The design of new composite materials using extreme biomimetics is of crucial importance for bioinspired materials science. Further progress in research and application of these new materials is impossible without understanding the mechanisms of formation, as well as structural features at the molecular and nano-level. It presents a challenge to obtain a holistic understanding of the mechanisms underlying the interaction of organic and inorganic phases under conditions of harsh chemical reactions for biopolymers. Yet, an understanding of these mechanisms can lead to the development of unusual-but functional-hybrid materials. In this work, a key way of designing centimeter-scale macroporous 3D composites, using renewable marine biopolymer spongin and a model industrial solution that simulates the highly toxic copper-containing waste generated in the production of printed circuit boards worldwide, is proposed. A new spongin-atacamite composite material is developed and its structure is confirmed using neutron diffraction, X-ray diffraction, high-resolution transmission electron microscopy/selected-area electron diffraction, X-ray photoelectron spectroscopy, near-edge X-ray absorption fine structure spectroscopy, and electron paramagnetic resonance spectroscopy. The formation mechanism for this material is also proposed. This study provides experimental evidence suggesting multifunctional applicability of the designed composite in the development of 3D constructed sensors, catalysts, and antibacterial filter systems.

Electronic Structures and Surface Reconstructions in Magnetic Superconductor RbEuFe4As4.

In pnictide RbEuFe4As4, superconductivity sets in at 36 K and coexists, below 15-19 K, with the long-range magnetic ordering of Eu 4f spins. Here we report scanning tunneling experiments performed on cold-cleaved single crystals of the compound. The data revealed the coexistence of large Rb-terminated and small Eu-terminated terraces, both manifesting 1 × 2 and 2×2 reconstructions. On 2×2 surfaces, a hidden electronic order with a period ∼5 nm was discovered. A superconducting gap of ∼7 meV was seen to be strongly filled with quasiparticle states. The tunneling spectra compared with density functional theory calculations confirmed that flat electronic bands due to Eu 4f orbitals are situated ∼1.8 eV below the Fermi level and thus do not contribute directly to Cooper pair formation.

Spin-polarized Fermi surface, hole-doping and band gap in graphene with boron impurities.

Embedding foreign atoms in graphene and interchanging the underlying substrate are proved to be efficient methods for manipulating the properties of graphene. Combining ARPES experiments with DFT calculations we show that boron-doped graphene (B-graphene) grown on a Co(0001) substrate by chemical vapor deposition (CVD) becomes hole doped and its Fermi surface near the K-point reveals strongly spin-polarized states. The latter stems from the spin-polarized mini Dirac cone that is an intrinsic two-dimensional feature of the graphene/Co(0001) interface and is formed by a mixture of C 2pz and Co 3d states. Since the CVD method allows the achievement of up to 20 at% of incorporated B atoms, this provides a certain flexibility for handling the spin-polarized properties of the system. We also show that the bonding of the B-graphene layer to the Co(0001) substrate can be released by intercalation of Li into the interface. This allows the exploration of the doping effect in detail. Finally, our ARPES data indicate a gap opening in the Dirac cone as a result of the highly unbalanced boron concentrations in the two graphene sublattices.

Cobalt-assisted recrystallization and alignment of pure and doped graphene.

Recrystallization of bulk materials is a well-known phenomenon, which is widely used in commercial manufacturing. However, for low-dimensional materials like graphene, this process still remains an unresolved puzzle. Thus, the understanding of the underlying mechanisms and the required conditions for recrystallization in low dimensions is essential for the elaboration of routes towards the inexpensive and reliable production of high-quality nanomaterials. Here, we unveil the details of the efficient recrystallization of one-atom-thick pure and boron-doped polycrystalline graphene layers on a Co(0001) surface. By applying photoemission and electron diffraction, we show how more than 90% of the initially misoriented graphene grains can be reconstructed into a well-oriented and single-crystalline layer. The obtained recrystallized graphene/Co interface exhibits high structural quality with a pronounced sublattice asymmetry, which is important for achieving an unbalanced sublattice doping of graphene. By exploring the kinetics of recrystallization for native and B-doped graphene on Co, we were able to estimate the activation energy and propose a mechanism of this process.

Effect of the fluorination technique on the surface-fluorination patterning of double-walled carbon nanotubes.

Double-walled carbon nanotubes (DWCNTs) are fluorinated using (1) fluorine F2 at 200 °C, (2) gaseous BrF3 at room temperature, and (3) CF4 radio-frequency plasma functionalization. These have been comparatively studied using transmission electron microscopy and infrared, Raman, X-ray photoelectron, and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. A formation of covalent C-F bonds and a considerable reduction in the intensity of radial breathing modes from the outer shells of DWCNTs are observed for all samples. Differences in the electronic state of fluorine and the C-F vibrations for three kinds of the fluorinated DWCNTs are attributed to distinct local surroundings of the attached fluorine atoms. Possible fluorine patterns realized through a certain fluorination technique are revealed from comparison of experimental NEXAFS F K-edge spectra with quantum-chemical calculations of various models. It is proposed that fluorination with F2 and BrF3 produces small fully fluorinated areas and short fluorinated chains, respectively, while the treatment with CF4 plasma results in various attached species, including single or paired fluorine atoms and -CF3 groups. The results demonstrate a possibility of different patterning of carbon surfaces through choosing the fluorination method.

Raman Spectroscopy of Lattice-Matched Graphene on Strongly Interacting Metal Surfaces.

Regardless of the widely accepted opinion that there is no Raman signal from single-layer graphene when it is strongly bonded to a metal surface, we present Raman spectra of a graphene monolayer on Ni(111) and Co(0001) substrates. The high binding energy of carbon to these surfaces allows formation of lattice-matched (1 × 1) structures where graphene is significantly stretched. This is reflected in a record-breaking shift of the Raman G band by more than 100 cm-1 relative to the case of freestanding graphene. Using electron diffraction and photoemission spectroscopy, we explore the aforementioned systems together with polycrystalline graphene on Co and analyze possible intercalation of oxygen at ambient conditions. The results obtained are fully supported by Raman spectroscopy. Performing a theoretical investigation of the phonon dispersions of freestanding graphene and stretched graphene on the strongly interacting Co surface, we explain the main features of the Raman spectra. Our results create a reliable platform for application of Raman spectroscopy in diagnostics of chemisorbed graphene and related materials.

Spin Orientation of Two-Dimensional Electrons Driven by Temperature-Tunable Competition of Spin-Orbit and Exchange-Magnetic Interactions.

Finding ways to create and control the spin-dependent properties of two-dimensional electron states (2DESs) is a major challenge for the elaboration of novel spin-based devices. Spin-orbit and exchange-magnetic interactions (SOI and EMI) are two fundamental mechanisms that enable access to the tunability of spin-dependent properties of carriers. The silicon surface of HoRh2Si2 appears to be a unique model system, where concurrent SOI and EMI can be visualized and controlled by varying the temperature. The beauty and simplicity of this system lie in the 4f moments, which act as a multiple tuning instrument on the 2DESs, as the 4f projections parallel and perpendicular to the surface order at essentially different temperatures. Here we show that the SOI locks the spins of the 2DESs exclusively in the surface plane when the 4f moments are disordered: the Rashba-Bychkov effect. When the temperature is gradually lowered and the system experiences magnetic order, the rising EMI progressively competes with the SOI leading to a fundamental change in the spin-dependent properties of the 2DESs. The spins rotate and reorient toward the out-of-plane Ho 4f moments. Our findings show that the direction of the spins and the spin-splitting of the two-dimensional electrons at the surface can be manipulated in a controlled way by using only one parameter: the temperature.

Large-Scale Sublattice Asymmetry in Pure and Boron-Doped Graphene.

The implementation of future graphene-based electronics is essentially restricted by the absence of a band gap in the electronic structure of graphene. Options of how to create a band gap in a reproducible and processing compatible manner are very limited at the moment. A promising approach for the graphene band gap engineering is to introduce a large-scale sublattice asymmetry. Using photoelectron diffraction and spectroscopy we have demonstrated a selective incorporation of boron impurities into only one of the two graphene sublattices. We have shown that in the well-oriented graphene on the Co(0001) surface the carbon atoms occupy two nonequivalent positions with respect to the Co lattice, namely top and hollow sites. Boron impurities embedded into the graphene lattice preferably occupy the hollow sites due to a site-specific interaction with the Co pattern. Our theoretical calculations predict that such boron-doped graphene possesses a band gap that can be precisely controlled by the dopant concentration. B-graphene with doping asymmetry is, thus, a novel material, which is worth considering as a good candidate for electronic applications.

A curious interplay in the films of N-heterocyclic carbene Pt(II) complexes upon deposition of alkali metals.

The recently synthesized series of Pt(II) complexes containing cyclometallating (phenylpyridine or benzoquinoline) and N-heterocyclic carbene ligands possess intriguing structures, topologies, and light emitting properties. Here, we report curious physicochemical interactions between in situ PVD-grown films of a typical representative of the aforementioned Pt(II) complex compounds and Li, Na, K and Cs atoms. Based on a combination of detailed core-level photoelectron spectroscopy and quantum-chemical calculations at the density functional theory level, we found that the deposition of alkali atoms onto the molecular film leads to unusual redistribution of electron density: essential modification of nitrogen sites, reduction of the coordination Pt(II) centre to Pt(0) and decrease of electron density on the bromine atoms. A possible explanation for this is formation of a supramolecular system "Pt complex-alkali metal ion"; the latter is supported by restoration of the system to the initial state upon subsequent oxygen treatment. The discovered properties highlight a considerable potential of the Pt(II) complexes for a variety of biomedical, sensing, chemical, and electronic applications.

Experimental and Computational Insight into the Chemical Bonding and Electronic Structure of Clathrate Compounds in the Sn-In-As-I System.

Inorganic clathrate materials are of great fundamental interest and potential practical use for application as thermoelectric materials in freon-free refrigerators, waste-heat converters, direct solar thermal energy converters, and many others. Experimental studies of their electronic structure and bonding have been, however, strongly restricted by (i) the crystal size and (ii) essential difficulties linked with the clean surface preparation. Overcoming these handicaps, we present for the first time a comprehensive picture of the electronic band structure and the chemical bonding for the Sn(24-x-δ)InxAs(22-y)I8 clathrates obtained by means of photoelectron spectroscopy and complementary quantum modeling.

Epitaxial B-Graphene: Large-Scale Growth and Atomic Structure.

Embedding foreign atoms or molecules in graphene has become the key approach in its functionalization and is intensively used for tuning its structural and electronic properties. Here, we present an efficient method based on chemical vapor deposition for large scale growth of boron-doped graphene (B-graphene) on Ni(111) and Co(0001) substrates using carborane molecules as the precursor. It is shown that up to 19 at. % of boron can be embedded in the graphene matrix and that a planar C-B sp(2) network is formed. It is resistant to air exposure and widely retains the electronic structure of graphene on metals. The large-scale and local structure of this material has been explored depending on boron content and substrate. By resolving individual impurities with scanning tunneling microscopy we have demonstrated the possibility for preferential substitution of carbon with boron in one of the graphene sublattices (unbalanced sublattice doping) at low doping level on the Ni(111) substrate. At high boron content the honeycomb lattice of B-graphene is strongly distorted, and therefore, it demonstrates no unballanced sublattice doping.

Observation of single-spin Dirac fermions at the graphene/ferromagnet interface.

With the discovery and first characterization of graphene, its potential for spintronic applications was recognized immediately. Since then, an active field of research has developed trying to overcome the practical hurdles. One of the most severe challenges is to find appropriate interfaces between graphene and ferromagnetic layers, which are granting efficient injection of spin-polarized electrons. Here, we show that graphene grown under appropriate conditions on Co(0001) demonstrates perfect structural properties and simultaneously exhibits highly spin-polarized charge carriers. The latter was conclusively proven by observation of a single-spin Dirac cone near the Fermi level. This was accomplished experimentally using spin- and angle-resolved photoelectron spectroscopy, and theoretically with density functional calculations. Our results demonstrate that the graphene/Co(0001) system represents an interesting candidate for applications in devices using the spin degree of freedom.

Insight into bio-metal interface formation in vacuo: interplay of S-layer protein with copper and iron.

The mechanisms of interaction between inorganic matter and biomolecules, as well as properties of resulting hybrids, are receiving growing interest due to the rapidly developing field of bionanotechnology. The majority of potential applications for metal-biohybrid structures require stability of these systems under vacuum conditions, where their chemistry is elusive, and may differ dramatically from the interaction between biomolecules and metal ions in vivo. Here we report for the first time a photoemission and X-ray absorption study of the formation of a hybrid metal-protein system, tracing step-by-step the chemical interactions between the protein and metals (Cu and Fe) in vacuo. Our experiments reveal stabilization of the enol form of peptide bonds as the result of protein-metal interactions for both metals. The resulting complex with copper appears to be rather stable. In contrast, the system with iron decomposes to form inorganic species like oxide, carbide, nitride, and cyanide.

Oxygen reduction by lithiated graphene and graphene-based materials.

Oxygen reduction reaction (ORR) plays a key role in lithium-air batteries (LABs) that attract great attention thanks to their high theoretical specific energy several times exceeding that of lithium-ion batteries. Because of their high surface area, high electric conductivity, and low specific weight, various carbons are often materials of choice for applications as the LAB cathode. Unfortunately, the possibility of practical application of such batteries is still under question as the sustainable operation of LABs with carbon cathodes is not demonstrated yet and the cyclability is quite poor, which is usually associated with oxygen reduced species side reactions. However, the mechanisms of carbon reactivity toward these species are still unclear. Here, we report a direct in situ X-ray photoelectron spectroscopy study of oxygen reduction by lithiated graphene and graphene-based materials. Although lithium peroxide (Li2O2) and lithium oxide (Li2O) reactions with carbon are thermodynamically favorable, neither of them was found to react even at elevated temperatures. As lithium superoxide is not stable at room temperature, potassium superoxide (KO2) prepared in situ was used instead to test the reactivity of graphene with superoxide species. In contrast to Li2O2 and Li2O, KO2 was demonstrated to be strongly reactive.

The chemistry of imperfections in N-graphene.

Many propositions have been already put forth for the practical use of N-graphene in various devices, such as batteries, sensors, ultracapacitors, and next generation electronics. However, the chemistry of nitrogen imperfections in this material still remains an enigma. Here we demonstrate a method to handle N-impurities in graphene, which allows efficient conversion of pyridinic N to graphitic N and therefore precise tuning of the charge carrier concentration. By applying photoemission spectroscopy and density functional calculations, we show that the electron doping effect of graphitic N is strongly suppressed by pyridinic N. As the latter is converted into the graphitic configuration, the efficiency of doping rises up to half of electron charge per N atom.