Bone Metabolism and Dental Implant Insertion as a Correlation Affecting on Marginal Bone Remodeling: Texture Analysis and the New Corticalization Index, Predictor of Marginal Bone Loss-3 Months of Follow-Up.

Background/Objectives: The general condition of implantology patients is crucial when considering the long- and short-term survival of dental implants. The aim of the research was to evaluate the correlation between the new corticalization index (CI) and patients' condition, and its impact on marginal bone loss (MBL) leading to implant failure, using only radiographic (RTG) images on a pixel level. Method: Bone near the dental implant neck was examined, and texture features were analyzed. Statistical analysis includes analysis of simple regression where the correlation coefficient (CC) and R2 were calculated. Detected relationships were assumed to be statistically significant when p < 0.05. Statgraphics Centurion version 18.1.12 (Stat Point Technologies, Warrenton, VA, USA) was used to conduct the statistical analyses. Results: The research revealed a correlation between MBL after 3 months and BMI, PTH, TSH, Ca2+ level in blood serum, phosphates in blood serum, and vitamin D. A correlation was also observed between CI and PTH, Ca2+ level in blood serum, vitamin D, LDL, HDL, and triglycerides on the day of surgery. After 3 months of the observation period, CI was correlated with PTH, TSH, Ca2+ level in blood serum, and triglycerides. Conclusion: The results of the research confirm that the general condition of patients corresponds with CI and MBL. A patient's general condition has an impact on bone metabolism around dental implants. Implant insertion should be considered if the general condition of the patient is not stable. However, CI has not yet been fully investigated. Further studies are necessary to check and categorize the impact of corticalization on marginal bone loss near dental implants.

Association Study of Serotonin 1A Receptor Gene, Personality, and Anxiety in Women with Alcohol Use Disorder.

Alcohol use disorder is considered a chronic and relapsing disorder affecting the central nervous system. The serotonergic system, mainly through its influence on the mesolimbic dopaminergic reward system, has been postulated to play a pivotal role in the underlying mechanism of alcohol dependence. The study aims to analyse the association of the rs6295 polymorphism of the 5HTR1A gene in women with alcohol use disorder and the association of personality traits with the development of alcohol dependence, as well as the interaction of the rs6295, personality traits, and anxiety with alcohol dependence in women. The study group consisted of 213 female volunteers: 101 with alcohol use disorder and 112 controls. NEO Five-Factor and State-Trait Anxiety Inventories were applied for psychometric testing. Genotyping of rs6295 was performed by real-time PCR. We did not observe significant differences in 5HTR1A rs6295 genotypes (p = 0.2709) or allele distribution (p = 0.4513). The AUD subjects scored higher on the anxiety trait (p < 0.0001) and anxiety state (p < 0.0001) scales, as well as on the neuroticism (p < 0.0001) and openness (p = 0134) scales. Significantly lower scores were obtained by the AUD subjects on the extraversion (p < 0.0001), agreeability (p < 0.0001), and conscientiousness (p < 0.0001) scales. Additionally, we observed a significant effect of 5HTR1A rs6295 genotype interaction and alcohol dependency, or lack thereof, on the openness scale (p = 0.0016). In summary, this study offers a comprehensive overview of alcohol dependence among women. It offers valuable insights into this complex topic, contributing to a more nuanced understanding of substance use among this specific demographic. Additionally, these findings may have implications for developing prevention and intervention strategies tailored to individual genetic and, most importantly, personality and anxiety differences.

New Radiological Corticalization Index as an Indicator of Implant Success Rate Depending on Prosthetic Restoration-5 Years of Follow-Up.

The new Radiological Corticalization Index (CI) is an indicator that describes bone remodeling near the dental implant's neck at the pixel level and is not visible to the naked eye. The aim of this research was to evaluate the correlation between the CI and bone remodeling using only radiographic (RTG) images. RTG samples were divided into groups depending on prosthetic restoration; the implant neck area around dental implants was examined, and texture features of the RTG images were analyzed. The study also investigated the type of prosthetic restoration and its influence as a factor on bone structure. The statistical analysis included evaluating feature distribution, comparing means (t-test) or medians (W-test), and performing a regression analysis and one-way analysis of variance or the Kruskal-Wallis test, as no normal distribution or between-group variance was indicated for the significant differences in the investigated groups. Differences or relationships were considered statistically significant at p < 0.05. The research revealed correlations between single crowns, overdenture restoration, bridge restoration, platform switching, prosthetic fracture, CI, and also marginal bone loss where p was lower than 0.05. However, the corticalization phenomenon itself has not yet been fully explored. The findings suggest that, depending on the type of prosthetic restoration, the corticalization index may correlate with marginal bone loss or not. Further research is necessary, as the index is suspected to not be homogeneous.

Efficacy of Computed Tomography and Magnetic Resonance Imaging in the Assessment of Depth of Invasion in Oral Squamous Cell Carcinoma: Analysis of 125 Clinical Cases.

Radiological diagnosis of oral squamous cell carcinoma (OSCC) is one of the main steps in treatment planning. T (tumor size), DOI (depth of invasion) (AJCC 8th edition), and nodal metastases (N+) were evaluated using CT and MRI to assess the most effective imaging method. The effectiveness of the radiological imaging methods was compared with histopathological results. Imaging diagnostic studies were performed and retrospectively analyzed in 125 patients with OSCC (CT n = 54 and MRI n = 71). Histopathology evaluated T, DOI, and N+. The radiological T results of CT in comparison with histopathological examination showed agreement in 62.5% of cases for T1, 56.25% for T2, 25% for T3, and 42.8% for T4 (p-value = 0.07), and regarding MRI, 52.2% for T1, 36.4% for T2, 33.3% in T3, and 33.3% for T4. The DOI results of CT and MRI juxtaposed against the histopathological findings were as follows: for CT, n = 18 for DOI ≤ 10 mm and n = 36 for >10 mm; for MRI, n = 29 for DOI ≤ 10 mm and n = 42 for >10 mm (DOI CT vs. DOI hist. pat. p-value = 0.23; DOI MRI vs. DOI hist. pat. p-value = 0.006). Regarding nodal metastasis, n = 21 for N0 and n = 32 for N+ for CT (p-value = 0.02), and n = 49 for N0 and n = 22 for N+ for MRI (p-value = 0.1). In the radiological N+ group, the histopathological findings coincided with the results of MRI and CT in 27% and 62.5% of cases, respectively (N0: 83.6% for MRI; 85.7% for CT). Upon evaluating T, a decreasing percentage of overlapping results with an increasing tumor size was observed. The accuracy of both imaging studies was at a similar level, with a slight advantage for MRI. Among the patients on whom CT was performed, DOI analysis did not show statistically significant differences. This led to the conclusion that, in most cases, the DOI results based on CT overlapped with those described via histopathological examination. However, among the group of patients with MRI as the imaging method of choice, the differences proved to be statistically significant (p-value = 0.006). The results of this study indicate that CT is a more accurate method for DOI assessment. The results of the radiologic metastasis evaluation (N+ group) overlapped more in the CT group, while the percentage of corresponding results in the radiologic N0 vs. hist. pat. N0 group was high and similar in both groups. These results indicate that it is easier to confirm the absence of a metastasis than its presence.

Which of the 37 Plates Is the Most Mechanically Appropriate for a Low-Neck Fracture of the Mandibular Condyle? A Strength Testing.

(1) Background: The mandible is the most frequently injured component of the facial skeleton, with 25-45% of mandibular fractures involving the condylar process. This study aims to mechanically compare which plates are most suitable for use in low-neck fractures of the condyle. (2) Methods: Polyurethane mandibular models with simulated low-neck fractures were tested using 37 distinct plate designs. These plates were fabricated from 1 mm thick, grade 23 titanium sheets. The models were then subjected to force tests on a strength machine, and the correlation between applied force and fracture displacement was recorded. (3) Results: For low-neck fractures, XCP side-dedicated 3+5 and ACP-T plates demonstrated strength comparable to that of two straight plates, the current gold standard in osteosynthesis. (4) Conclusions: The Mechanical Excellence Factor (MEF) introduced by the authors provides a more accurate metric for theoretically predicting a plate's mechanical strength compared to the Plate Design Factor (PDF). Eight plate characteristics were utilized to calculate the MEF. Employing the MEF allows for rapid, preliminary validation before undertaking strength tests. Furthermore, the findings of this study can guide the selection of the most durable plate designs for subsequent fatigue testing.

Oral squamous cell carcinoma - do we always need elective neck dissection? evaluation of clinicopathological factors of greatest prognostic significance: a cross-sectional observational study.

The aim of the study was to find clinical and pathological factors with the greatest prognostic significance in patients with OSCC. The analysis included 125 patients grouped according to the tumor primary site (TPS): the floor of the mouth (FOM), tongue (TC) and retromolar triangle (RMT). Grading (G), tumor size (pT), nodal metastases (NM), local recurrence (LR), nodal recurrence (NR), perineural invasion (PNI), lymphovascular invasion (LVI), extranodal extension (pENE), and nodal yield (NY) were evaluated in each group. Results: With regard to TPS, FOM appeared to be the most metastatic. However, the recurrence rate was similar to TC tumors, which were characterized by higher G than those in other locations. When analyzing G, the highest percentage of LR (40.5%) and NM (34.5%) was observed among patients with G2. As G increased, so did the number of pENE G1 - 7.4%; G2 - 31%; G3 - 35.7%; LVI: G1 - 25.9%; G2 - 50%; G3 - 57.1%; PNI: G1 - 29.6%; G2 - 47.6%; G3 - 92.9%; NR G1 - 14.8%; G2 - 32.1%; G3 - 21.4%. Grading did not affect the type of growth and did not directly affect the occurrence of NR. pT and DOI increased the frequency of NM but we did not observe any effect of pT and DOI on LR, PNI, and LVI. NY in the study group did not increase the risk of NR. Conclusion: Tumor primary sites within the FOM, TC, and pT classification are the factors that increase the risk of NM and LR. However, apart from the primary site predisposing to the occurrence of NM, the histological structure of the tumor turned out to be the most important feature affecting the patient's prognosis. The number of cases of pENE+, LVI+, PNI+, NM+, and NR+ increased with the increase in G. Although the pT, DOI increased the frequency of NM, we did not observe the effect of the pT and DOI on LR, PNI and LVI. Thus, even in the case of a small tumor of the FOM and TC with at least G2, elective neck dissection should be performed each time.

Is Corticalization in Radiographs Related to a Higher Risk of Bone Loss around Dental Implants in Smoking Patients? A 5-Year Observation of Radiograph Bone-Texture Changes.

BACKGROUND: Currently, the topic of dental implants is widely researched. However, still compromising are the factors that can affect implant loss as a consequence of marginal bone loss. One of the factors is smoking, which has a devastating effect on human health and bone structure. Oral health and jaw condition are also negatively affected by smoking. The aim of this study was to evaluate the peri-implant jawbone corticalization phenomenon in tobacco smokers. METHODS: A total of 2196 samples from 768 patients with an implant in the neck area were checked, and texture features were analyzed. The corticalization phenomenon was investigated. All analyses were performed in MaZda Software. The influence of corticalization was investigated as a factor on bone structure near the implant neck. The statistical analysis included a feature distribution evaluation, mean (t-test) or median (W-test) comparison, analysis of regression and one-way analysis of variance or Kruskal-Wallis test as no normal distribution or between-group variance was indicated for the significant differences in the investigated groups. Detected differences or relationships were assumed to be statistically significant when p < 0.05. RESULTS: The research revealed that MBL was correlated with smoking after 5 years (0.42 mm ± 1.32 mm 0 mm ± 1.25 mm), the Corticalization Index was higher in the smoker group on the day of surgery, and it became higher after 5y of observation (185.98 ± 90.8 and 243.17 ± 155.47). The implant-loss frequency was higher in the group of smokers, too, compared to non-smokers (6.74% and 2.87%). The higher the torque value during the implant placement, the higher the Corticalization Phenomenon Index. CONCLUSIONS: The research revealed a correlation between smoking and changes in bone structure in radio textures near the implants. The corticalization phenomenon is important, may be detected immediately after implant placement and may be one of the indicators of the implant success rate.

Exploring the Importance of Corticalization Occurring in Alveolar Bone Surrounding a Dental Implant.

Several measures describing the transformation of trabecular bone to cortical bone on the basis of analysis of intraoral radiographs are known (including bone index or corticalization index, CI). At the same time, it has been noted that after functional loading of dental implants such transformations occur in the bone directly adjacent to the fixture. Intuitively, it seems that this is a process conducive to the long-term maintenance of dental implants and certainly necessary when immediate loading is applied. The authors examined the relationship of implant design features to marginal bone loss (MBL) and the intensity of corticalization over a 10-year period of functional loading. This study is a general description of the phenomenon of peri-implant bone corticalization and an attempt to interpret this phenomenon to achieve success of implant treatment in the long term. Corticalization significantly increased over the first 5-year functional loading (CI from 200 ± 146 initially to 282 ± 182, p < 0.001) and maintained a high level (CI = 261 ± 168) in the 10-year study relative to the reference bone (149 ± 178). MBL significantly increased throughout the follow-up period­5 years: 0.83 ± 1.26 mm (p < 0.001), 10 years: 1.48 ± 2.01 mm (p < 0.001). MBL and radiographic bone structure (CI) were evaluated in relation to intraosseous implant design features and prosthetic work performed. In the scope of the study, it can be concluded that the phenomenon of peri-implant jawbone corticalization seems an unfavorable condition for the future fate of bone-anchored implants, but it requires further research to fully explain the significance of this phenomenon.

Are Torque-Induced Bone Texture Alterations Related to Early Marginal Jawbone Loss?

The reason why marginal bone loss (MBL) occurs after dental implant insertion without loading has not yet been clearly investigated. There are publications that confirm or reject the notion that there are factors that induce marginal bone loss, but no research investigates what exactly occurs in the bone surrounding the implant neck. In this study, 2196 samples of dental implant neck bone radiographs were analyzed. The follow-up period was 3 months without functional loading of the implant. Marginal bone loss was evaluated in relation to the torque used during the final phase of implant insertion. Radiographic texture features were also analyzed and evaluated. The analyses were performed individually for the anterior and posterior part of the alveolar crest in both the mandible and maxilla. After 3 months, an MBL relation with higher torque (higher than 40 Ncm; p < 0.05) was observed, but only in the lower jaw. The texture features Sum Average (SumAverg), Entropy, Difference Entropy (DifEntr), Long-Run Emphasis (LngREmph), Short-Run Emphasis (ShrtREmph), and discrete wavelet decomposition transform features were changed over time. This study presents that MBL is related to the torque value during dental implant insertion and the location of the procedure. The increasing values of SumAverg and LngREmph correlated with MBL, which were 64.21 to 64.35 and 1.71 to 2.01, respectively. The decreasing values of Entr, DifEntr, and ShrtREmph also correlated with MBL, which were 2.58 to 2.47, 1.11 to 1.01, and 0.88 to 0.84, respectively. The analyzed texture features may become good indicators of MBL in digital dental surgery.

What Does Bone Corticalization around Dental Implants Mean in Light of Ten Years of Follow-Up?

The phenomenon of peri-implant bone corticalization after functional loading does not yet have a definite clinical significance and impact on prognosis. An attempt was made to assess the clinical significance of this phenomenon. This prospective study included 554 patients. Standardized intraoral radiographs documenting the jawbone environment of 1556 implants were collected. The follow-up period was 10 years of functional loading. Marginal alveolar bone loss (MBL) and radiographic bone structure (bone index, BI) were evaluated in relation to intraosseous implant design features and prosthetic work performed. After five years, bone structure abnormalities expressed by a reduction of BI to 0.47 ± 0.21 and MBL = 0.88 ± 1.27 mm were observed. Both values had an inverse relationship with each other (p < 0.0001). Reference cancellous bone showed BI = 0.85 ± 0.18. The same relationship was observed after ten years of functional loading: BI = 0.48 ± 0.21, MBL = 1.49 ± 1.94 mm, and again an inverse relationship (p < 0.0001). Increasing corticalization (lower BI) is strongly associated with increasing marginal bone loss and increasing corticalization precedes future marginal bone loss. Marginal bone loss will increase as corticalization progresses.

Are recent available blended collagen-calcium phosphate better than collagen alone or crystalline calcium phosphate? Radiotextural analysis of a 1-year clinical trial.

OBJECTIVES: The purpose of this study is to compare bone regeneration properties of recently available collagen-calcium phosphate (C-CP) blend as bone substitute (BS) material in oral surgery with calcium phosphate (CP) as well as collagen material (Collagen). Is C-CP better than the classic loose CP, or is it at least equally effective in the jawbone regeneration with the superiority of a coherent consistency? MATERIALS AND METHODS: This study included 102 patients during 12-month follow-up. All patients underwent the following surgical procedures: sinus lift (52patients) and tooth extraction (50patients). Patients were divided into 3 groups which are as follows: experimental group with C-CP, CP and pure Collagen as control groups. Texture analysis was performed in intra-oral radiographs. Analyses were performed in the MaZda 4.6 software. Average 2444-pixel ROIs were established in the image of BS materials and normal trabecular bone for texture comparison to evaluate the jawbone regeneration process. Four features were calculated and investigated. RESULTS: Texture analyses revealed that all 4 features described the healing process well. Reference textural value of feature SumOfSqrs < 102.37 was soft tissue, DifEntr < 1.1 was not the bone, Entr < 2.62 was not a bone and LngREmph > 1.8 was soft tissue. For 12 months, bone regeneration was proved by 3 of 4 investigated features. Only Entr indicated to CP remnants in the ROI (p < 0.05). CONCLUSIONS: This study proves that blended collagen-calcium phosphate as a BS material can bring satisfactory and predictable outcomes in jawbone regeneration. CLINICAL RELEVANCE: Clinicians can choose a satisfactory and predictable material for bone regeneration treatment.

Fast-Versus Slow-Resorbable Calcium Phosphate Bone Substitute Materials-Texture Analysis after 12 Months of Observation.

The development of oral surgery and implantology has led to the need for better and more predictable materials. Various substitute materials are now used for bone regeneration. The replacement of scaffolding material by new bone tissue is the most important condition. This study aimed to evaluate the effects of the resorbability of bone substitute materials during regeneration to the jawbone. The study included 88 patients during the 12-month follow-up. All the patients had undergone oral surgical procedures using two different substitute materials-Cerasorb (high-rate resorbable (ß-tricalcium phosphate)) and Endobone (low-rate resorbable (hydroxyapatite)). Texture analysis was performed in intraoral radiographs, in which regions of interest were established for the bone substitute materials and reference bone. Five texture features were calculated, namely the sum average (SumAverg), entropy (Entropy), and three Harr discrete wavelet transform coefficients. This study revealed that all 5 features described the healing process well. Entropy was decreased in both cases with time; however, in Cerasorb cases, the texture feature values were very close to those of the reference bone after 12 months of healing (p < 0.05). The wavelet transform coefficient at scale 6 also showed that longitudinal objects appeared in implantation sites, similar to trabecular bone (p < 0.05) after 12 months of healing. The slow-resorbing material restored the structure of the alveolar crest better in terms of producing large objects similar to the components of a barrel bone image (wavelet coefficients), but required a longer time for reconstruction. The fast-resorbing material showed a texture image with a similar scattering of structures to that of the reference bone (entropy) after 12 months.

Influence of General Mineral Condition on Collagen-Guided Alveolar Crest Augmentation.

The local regeneration of bone defects is regulated by general hormone, enzyme, ion, and vitamin levels. General diseases and dysregulation of the human mineral system can impact this process, even in alveolar crest. The aim of this study is to investigate a relation between bone density, measured in two-dimensional X-rays, and general mineral condition of patients. The study included 42 patients on whom tooth extractions were performed. Data were divided into two groups: the region where collagen scaffold (BRM) was used and the reference region of intact normal bone (REF). Two-dimensional intraoral radiographs were taken in all cases just after the surgery (00 M) and 12 months later (12 M). Thyrotropin (TSH), parathormone (PTH), Ca2+ in serum, HbA1c, vitamin 25(OH)D3, and spine densitometry were checked. Digital texture analysis in MaZda 4.6 software was done. Texture Index (TI: BRM 1.66 ± 0.34 in 00 M, 1.51 ± 0.41 in 12 M, and REF 1.72 ± 0.28) and Bone Index (BI: BRM 0.73 ± 0.17 in 00 M, 0.65 ± 0.22 41 in 12 M, and REF 0.80 ± 0.14) were calculated to evaluate bone regeneration process after 12 months of healing (TI (p < 0.05) and BI (p < 0.01) are lower in BRM 12 M than in REF). This showed a relation between BI and TSH (R2 = 26%, p < 0.05), as well as a between BI and patient age (R2 = 65%, p < 0.001), and a weak relation between TI and TSH level (R2 = 10%, p < 0.05). This study proved that a collagen scaffold can be successfully used in alveolar crest regeneration, especially in patients with a high normal level of TSH in the middle-aged population.

New Oral Surgery Materials for Bone Reconstruction-A Comparison of Five Bone Substitute Materials for Dentoalveolar Augmentation.

This article presents a comparison of bone replacement materials in terms of their ability to produce living bone image at the place of their implantation. Five bone replacement materials are compared (Osteovit-porous collagen, Cerasorb Foam-collagen scaffolding of synthetic ß tricalcium phosphate, Osbone-synthetic hydroxyapatite, Endobone-deproteinized bovine-derived cancellous bone hydroxyapatite, and Cerasorb-synthetic ß tricalcium phosphate). Intraoral radiographs are taken immediately after implantation and 12 months later. The texture analysis was performed to assess (texture index, TI) the level of structure chaos (entropy) in relation to the presence of longitudinal elements visible in radiographs (run length emphasis moment). The reference ratio of the chaotic trabecular pattern (Entropy) to the number of longitudinal structures, i.e., trabeculae (LngREmph), is 176:100 (i.e., 1.76 ± 0.28). Radiological homogeneity immediately after the implantation procedure is a result of the similar shape of its particles (Osbone, Endobone and Cerasorb) or radiolucency (Osteovit, Cerasorb Foam). The particles visible in radiographs were similar in the LngREmph parameters applied to the reference bone, but not in the co-occurrence matrix features. The TI for Osteovit during a 12-month follow-up period changed from 1.55 ± 0.26 to 1.48 ± 0.26 (p > 0.05), for Cerasorb Foam from 1.82 ± 0.27 to 1.63 ± 0.24 (p < 0.05), for Osbone from 1.97 ± 0.31 to 1.74 ± 0.30 (p < 0.01), and for Endobone from 1.86 ± 0.25 to 1.84 ± 0.25 (p > 0.05), The observed structure in the radiological image of bone substitute materials containing calcium phosphates obtains the characteristics of a living bone image after twelve months.

Two different techniques of manufacturing TMJ replacements - A technical report.

INTRODUCTION: Presently, during the surgical treatment of the patients in maxillofacial surgery, one can use various medical implants. Moreover custom made implants are being used. Replacements may be fitted to the structure and shape of the human skull owing to CAD/CAM (custom aided design/manufacture) called customized implants. This study was aimed to report for the first time clinical material from which custom implants, using two different techniques, were manufactured to reconstruct the temporomandibular joint (TMJ). MATERIAL AND METHODS: In this study, eleven patients with an average age of 54 years were included. All of the patients underwent TMJ reconstruction using direct metal laser sintering (DMLS) or computer numerical control milling (CNC) techniques for implant manufacture. Four of the eleven patients had a malignancy diagnosis, and seven had a benign diagnosis. Patients complained of hypomobility of the TMJ, facial asymmetry, pain and swelling of the preauricular region. Treatment included 7 CNC milled implants and 4 implants in DMLS. RESULTS: More metallic implant parts with a rough surface were associated with the DMLS technique. Post operational, uneventful healing was observed in all clinical cases during an average of 26.8 months of follow-up. Three months post-operation, facial nerve palsy, swallowing disturbances and pain were not observed. Infections, allergic reactions to materials and re-ankylosis were also not observed. Replacements received correct forms and functions owing to the CAM techniques. Post-operational maximal interincisal opening improved (p < 0.01) and was not significantly related to preoperational opening, age, sex, diagnosis or adjuvant radiotherapy. CONCLUSION: Considering both methods, the feature that differentiates the manufacture technique is the more subtractive surface finishing required for the DMLS implant than the CNC implant. Both techniques resulted the same clinical outcomes and can be used successfully in patients with neoplastic lesions and other TMJ disorders. Unfortunately, DMLS is more vulnerable to fracture.