Functional extracellular vesicles from SHEDs combined with gelatin methacryloyl promote the odontogenic differentiation of DPSCs for pulp regeneration.

BACKGROUND: Pulp regeneration is a novel approach for the treatment of immature permanent teeth with pulp necrosis. This technique includes the combination of stem cells, scaffolds, and growth factors. Recently, stem cell-derived extracellular vesicles (EVs) have emerged as a new methodology for pulp regeneration. Emerging evidence has proven that preconditioning is an effective scheme to modify EVs for better therapeutic potency. Meanwhile, proper scaffolding is of great significance to protect EVs from rapid clearance and destruction. This investigation aims to fabricate an injectable hydrogel loaded with EVs from pre-differentiated stem cells from human exfoliated deciduous teeth (SHEDs) and examine their effects on pulp regeneration. RESULTS: We successfully employed the odontogenic induction medium (OM) of SHEDs to generate functional EV (OM-EV). The OM-EV at a concentration of 20 µg/mL was demonstrated to promote the proliferation and migration of dental pulp stem cells (DPSCs). The results revealed that OM-EV has a better potential to promote odontogenic differentiation of DPSCs than common EVs (CM-EV) in vitro through Alizarin red phalloidin, alkaline phosphatase staining, and assessment of the expression of odontogenic-related markers. High-throughput sequencing suggests that the superior effects of OM-EV may be attributed to activation of the AMPK/mTOR pathway. Simultaneously, we prepared a photocrosslinkable gelatin methacryloyl (GelMA) to construct an OM-EV-encapsulated hydrogel. The hydrogel exhibited sustained release of OM-EV and good biocompatibility for DPSCs. The released OM-EV from the hydrogel could be internalized by DPSCs, thereby enhancing their survival and migration. In tooth root slices that were subcutaneously transplanted in nude mice, the OM-EV-encapsulated hydrogel was found to facilitate dentinogenesis. After 8 weeks, there was more formation of mineralized tissue, as well as higher levels of dentin sialophosphoprotein (DSPP) and dentin matrix protein-1 (DMP-1). CONCLUSIONS: The effects of EV can be substantially enhanced by preconditioning of SHEDs. The functional EVs from SHEDs combined with GelMA are capable of effectively promoting dentinogenesis through upregulating the odontogenic differentiation of DPSCs, which provides a promising therapeutic approach for pulp regeneration.

Fabrication and properties of PLA/ß-TCP scaffolds using liquid crystal display (LCD) photocuring 3D printing for bone tissue engineering.

Introduction: Bone defects remain a thorny challenge that clinicians have to face. At present, scaffolds prepared by 3D printing are increasingly used in the field of bone tissue repair. Polylactic acid (PLA) has good thermoplasticity, processability, biocompatibility, and biodegradability, but the PLA is brittle and has poor osteogenic performance. Beta-tricalcium phosphate (ß-TCP) has good mechanical properties and osteogenic induction properties, which can make up for the drawbacks of PLA. Methods: In this study, photocurable biodegradable polylactic acid (bio-PLA) was utilized as the raw material to prepare PLA/ß-TCP slurries with varying ß-TCP contents (ß-TCP dosage at 0%, 10%, 20%, 30%, 35% of the PLA dosage, respectively). The PLA/ß-TCP scaffolds were fabricated using liquid crystal display (LCD) light-curing 3D printing technology. The characterization of the scaffolds was assessed, and the biological activity of the scaffold with the optimal compressive strength was evaluated. The biocompatibility of the scaffold was assessed through CCK-8 assays, hemocompatibility assay and live-dead staining experiments. The osteogenic differentiation capacity of the scaffold on MC3T3-E1 cells was evaluated through alizarin red staining, alkaline phosphatase (ALP) detection, immunofluorescence experiments, and RT-qPCR assays. Results: The prepared scaffold possesses a three-dimensional network structure, and with an increase in the quantity of ß-TCP, more ß-TCP particles adhere to the scaffold surface. The compressive strength of PLA/ß-TCP scaffolds exhibits a trend of initial increase followed by decrease with an increasing amount of ß-TCP, reaching a maximum value of 52.1 MPa at a 10% ß-TCP content. Degradation rate curve results indicate that with the passage of time, the degradation rate of the scaffold gradually increases, and the pH of the scaffold during degradation shows an alkaline tendency. Additionally, Live/dead staining and blood compatibility experiments suggest that the prepared PLA/ß-TCP scaffold demonstrates excellent biocompatibility. CCK-8 experiments indicate that the PLA/ß-TCP group promotes cell proliferation, and the prepared PLA/ß-TCP scaffold exhibits a significant ability to enhance the osteogenic differentiation of MC3T3-E1 cells in vitro. Discussion: 3D printed LCD photocuring PLA/ß-TCP scaffolds could improve surface bioactivity and lead to better osteogenesis, which may provide a unique strategy for developing bioactive implants in orthopedic applications.

Silenced SOX2-OT alleviates ventricular arrhythmia associated with heart failure by inhibiting NLRP3 expression via regulating miR-2355-3p.

BACKGROUND: Nucleotide-binding oligomerization domain-like receptor family pyrin domain containing 3 (NLRP3) inflammasomes are the most important factors in ventricular arrhythmia associated with heart failure (VA-HF). However, how the relationship between lncRNA and NLRP3 inflammasomes is regulated in VA-HF has not been investigated in detail. Thus, we aimed to determine the effects of SOX2-overlapping transcripts (SOX2-OT) by targeting NLRP3 in rats with VA-HF. METHODS: We established rats (SPF, male, weight: 240 ± 10 g) with VA-HF by aortic coarctation and constant-current stimulation, then injected them with small interfering SOX2-OT and anti-miR-2355-3p. Six weeks later, SOX2-OT and miR-2355-3p expression was measured using the quantitative reverse transcriptase-polymerase chain reaction and NLRP3, ASC, caspase-1, IL-1ß, and TGF-ß1 expression were measured by Western blot analysis; the ventricular chambers were histopathologically analyzed by staining with hematoxylin and eosin, Masson trichrome, and Picro Sirius Red and reactive oxygen species (ROS) levels were assessed by flow cytometry. The targeting relationship between miR-2355-3p and SOX2-OT or NLRP3 was verified using dual-luciferase reporter gene assays. RESULTS: The expression of SOX2-OT and levels of NLRP3 inflammasomes gradually increased in normal rats, and in those with heart failure and with VA-HF. Silencing SOX2-OT expression inhibited NLRP3, ASC, caspase-1, IL-1ß, and TGF-ß1 expression and ROS production, reduced the degrees of cardiomyocyte necrosis and fibrosis and alleviated cardiac dysfunction in rats with VA-HF. MicroR-2355-3p can bind the SOX2-OT and the 3'-untranslated region of NLRP3. Inhibiting miR-2355-3p reversed the effect of SOX2-OT in rats with VA-HF. CONCLUSIONS: Silencing SOX2-OT alleviated cardiac dysfunction in rats by reducing the activation of NLRP3 inflammasomes via regulating miR-2355-3p.

Identification of Potential Gene Interactions in Heart Failure Caused by Idiopathic Dilated Cardiomyopathy.

BACKGROUND Many heart failure (HF) cases are caused by idiopathic dilated cardiomyopathy (iDCM). This study explored the mechanisms of the development and progression of HF caused by iDCM. MATERIAL AND METHODS The gene expression profiles of 102 samples were downloaded from the GEO database (GSE5406). Differentially expressed genes (DEGs) were identified through GO analysis and a KEGG pathway analysis, respectively. A protein-protein interaction (PPI) network was constructed and analyzed to screen potential regulatory proteins. In addition, MCODE and a cytoHubba plugin were used to identify the module and hub genes of DEGs. Finally, transcription factors (TFs) were predicted using PASTAA. We did not perform whole-exome sequencing (WES) for detecting mitochondrial DNA (mtDNA). RESULTS A total of 197 DEGs were screened, and 3 modules, and 4 upregulated and 11 downregulated hub genes were screened. The GO analysis focused on the terms and 12 KEGG pathways were enriched. The FOS, TIMP1, and SERPINE1 hub genes, as well as some key TFs, demonstrated important roles in the progression of HF caused by iDCM. CEBPD, CEBOB, CDC37L1, and SRGN may be new targets for HF in iDCM patients. CONCLUSIONS The identified DEGs and their enriched pathways provide references for exploring the mechanisms of the development and progression of HF patients with iDCM. Moreover, modules, hub genes, and TFs may be useful in the treatment and diagnosis of HF patients with iDCM. However, mtDNA was not investigated.

Acetone gas sensor based on NiO/ZnO hollow spheres: Fast response and recovery, and low (ppb) detection limit.

NiO/ZnO composites were synthesized by decorating numerous NiO nanoparticles on the surfaces of well dispersed ZnO hollow spheres using a facile solvothermal method. Various kinds of characterization methods were utilized to investigate the structures and morphologies of the hybrid materials. The results revealed that the NiO nanoparticles with a size of ∼10nm were successfully distributed on the surfaces of ZnO hollow spheres in a discrete manner. As expected, the NiO/ZnO composites demonstrated dramatic improvements in sensing performances compared with pure ZnO hollow spheres. For example, the response of NiO/ZnO composites to 100ppm acetone was ∼29.8, which was nearly 4.6 times higher than that of primary ZnO at 275°C, and the response/recovery time were 1/20s, respectively. Meanwhile, the detection limit could extend down to ppb level. The likely reason for the improved gas sensing properties was also proposed.

Design of α-Fe2O3 nanorods functionalized tubular NiO nanostructure for discriminating toluene molecules.

A novel tubular NiO nanostructure was synthesized by a facile and low-cost hydrothermal strategy and then further functionalized by decorating α-Fe2O3 nanorods. The images of electron microscopy indicated that the α-Fe2O3 nanorods were assembled epitaxially on the surfaces of NiO nanotubes to form α-Fe2O3/NiO nanotubes. As a proof-of-concept demonstration of the function, gas sensing devices were fabricated from as-prepared α-Fe2O3/NiO nanotubes, and showed enhanced gas response and excellent selectivity toward toluene, giving a response of 8.8 to 5 ppm target gas, which was about 7.8 times higher than that of pure NiO nanotubes at 275 °C. The improved gas sensing performance of α-Fe2O3/NiO nanotubes could be attributed to the unique tubular morphology features, p-n heterojunctions and the synergetic behavior of α-Fe2O3 and NiO.

Template-free synthesis of hierarchical ZnFe2O4 yolk-shell microspheres for high-sensitivity acetone sensors.

Metal oxides with hierarchical microstructures have attracted tremendous attention with respect to their enhanced gas sensing properties. Herein, we reported the facile synthesis of hierarchical ZnFe2O4 yolk-shell microspheres via a template-free solvothermal strategy and the subsequent annealing and chemical etching process. Electron microscopy images undoubtedly demonstrated that the novel ZnFe2O4 architecture was constructed of a large number of nanosheet subunits with a thickness around 20 nm. As a proof-of-concept demonstration of the function, when evaluated as gas sensing materials, the as-prepared ZnFe2O4 yolk-shell microspheres manifested an extremely high response and a low detection limit to acetone at the operating temperature of 200 °C. Significantly, the response to 20 ppm acetone was retained well even after 200 cycles and continuous measurement for 30 days, indicating superior cyclability and long-term stability.