In Situ Growth of Sodium Manganese Hexacyanoferrate on Carbon Nanotubes for High-Performance Sodium-Ion Batteries.

Sodium manganese hexacyanoferrate (NaMnHCF) has emerged as a research hotspot among Prussian blue analogs for sodium-ion battery cathode materials due to its advantages of high voltage, high specific capacity, and abundant raw materials. However, its practical application is limited by its poor electronic conductivity. In this study, we aim to solve this problem through the in situ growth of NaMnHCF on carbon nanotubes (CNTs) using a simple coprecipitation method. The results show that the overall electronic conductivity of NaMnHCF is significantly improved after the introduction of CNTs. The NaMnHCF@10%CNT sample presents a specific capacity of 90 mA h g-1, even at a current density of 20 C (2400 mA g-1). The study shows that the optimized composite exhibits a superior electrochemical performance at different mass loadings (from low to high), which is attributed to the enhanced electron transport and shortened electron pathway. Surprisingly, the cycling performance of the composites was also improved, resulting from decreased polarization and the subsequent reduction in the side reactions at the cathode/electrolyte interface. Furthermore, we revealed the evolution of potential plateau roots from the extraction of crystal water during the charge-discharge process of NaMnHCF based on the experimental results. This study is instructive not only for the practical application of NaMnHCF materials but also for advancing our scientific understanding of the behavior of crystal water during the charge-discharge process.

The Pillar Effect of Large-Size Alkaline Ions on the Electrochemical Stability of Sodium Manganese Hexacyanoferrate for Sodium-Ion Batteries.

Sodium manganese hexacyanoferrate (NaMnHCF) is an attractive candidate as a cathode material for sodium-ion batteries due to its low cost and high energy density. However, its practical application is hindered by poor electrochemical stability caused by the Jahn-Teller effect of Mn and the unstable structure of NaMnHCF. Here, this paper aims to address this issue by introducing highly stable AMnHCF (where A = K, Rb, or Cs) through a facile method to composite with NaMnHCF. The findings reveal that all AMnHCFs have a "pillar effect" on the crystal structure of NaMnHCF. It is observed that the degree of pillar effect varies depending on the specific AMnHCF used. The less electrochemically inactive the alkaline ion is and the greater the degree of compositing with NaMnHCF, the more dramatic the pillar effect. KMnHCF shows limited pillar effect due to its rough composition with NaMnHCF and the loss of K+ upon (de)intercalation. RbMnHCF has lower electrochemical activity and can be better composited with NaMnHCF. On the other hand, CsMnHCF exhibits the strongest pillar effect due to the inactivation of Cs+ and the excellent coherent structure formed by CsMnHCF and NaMnHCF. This research provides a new perspective on stabilizing NaMnHCF with other alkaline elements.

Unveiling a Novel Role of Cdc42 in Pyruvate Metabolism Pathway to Mediate Insecticidal Activity of Beauveria bassiana.

The small GTPase Cdc42 acts as a molecular switch essential for cell cycles and polar growth in model yeast, but has not been explored in Beaurveria bassiana, an insect-pathogenic fungus serving as a main source of fungal formulations against arthropod pests. Here, we show the indispensability of Cdc42 for fungal insecticidal activity. Deletion of cdc42 in B. bassiana resulted in a great loss of virulence to Galleria mellonella, a model insect, via normal cuticle infection as well as defects in conidial germination, radial growth, aerial conidiation, and conidial tolerance to heat and UVB irradiation. The deleted mutant's hyphae formed fewer or more septa and produced unicellular blastospores with disturbed cell cycles under submerged-culture conditions. Transcriptomic analysis revealed differential expression of 746 genes and dysregulation of pyruvate metabolism and related pathways, which were validated by marked changes in intracellular pyruvate content, ATP content, related enzyme activities, and in extracellular beauvericin content and Pr1 protease activity vital for fungal virulence. These findings uncover a novel role for Cdc42 in the pathways of pyruvate metabolism and the pyruvate-involved tricarboxylic acid cycle (TCA cycle) and a linkage of the novel role with its indispensability for the biological control potential of B. bassiana against arthropod pests.

Confined Polysulfides in N-Doped 3D-CNTs Network for High Performance Lithium-Sulfur Batteries.

Improving the utilization efficiency of active materials and suppressing the dissolution of lithium polysulfides into the electrolyte are very critical for development of high-performance lithium-sulfur batteries. Herein, a novel strategy is proposed to construct a three-dimensional (3D) N-doped carbon nanotubes (CNTs) networks to support lithium polysulfides (3D-NCNT-Li2S6) as a binder-free cathode for high-performance lithium-sulfur batteries. The 3D N-doped CNTs networks not only provide a conductive porous 3D architecture for facilitating fast ion and electron transport but also create void spaces and porous channels for accommodating active sulfur. In addition, lithium polysulfides can be effectively confined among the networks through the chemical bond between Li and N. Owing to the synergetic effect of the physical and chemical confinement for the polysulfides dissolution, the 3D-NCNT-Li2S6 cathodes exhibit enhanced charge capacity and cyclic stability with lower polarization and faster redox reaction kinetics. With an initial discharge capacity of 924.8 mAh g-1 at 1 C, the discharge capacity can still maintain 525.1 mAh g-1 after 200 cycles, which is better than that of its counterparts.

A Three-Dimensional Electrospun Li6.4La3Zr1.4Ta0.6O12-Poly (Vinylidene Fluoride-Hexafluoropropylene) Gel Polymer Electrolyte for Rechargeable Solid-State Lithium Ion Batteries.

Developing high-quality solid-state electrolytes is important for producing next-generation safe and stable solid-state lithium-ion batteries. Herein, a three-dimensional highly porous polymer electrolyte based on poly (vinylidenefluoride-hexafluoropropylene) (PVDF-HFP) with Li6.4La3Zr1.4Ta0.6O12 (LLZTO) nanoparticle fillers (PVDF-HFP-LLZTO) is prepared using the electrospinning technique. The PVDF-HFP-LLZTO gel polymer electrolyte possesses a high ionic conductivity of 9.44 × 10-4 S cm-1 and a Li-ion transference number of 0.66, which can be ascribed that the 3D hierarchical nanostructure with abundant porosity promotes the liquid electrolyte uptake and wetting, and LLZTO nanoparticles fillers decrease the crystallinity of PVDF-HFP. Thus, the solid-state lithium battery with LiFePO4 cathode, PVDF-HFP-LLZTO electrolyte, and Li metal anode exhibits enhanced electrochemical performance with improved cycling stability.

A Stretchable and Safe Polymer Electrolyte with a Protecting-Layer Strategy for Solid-State Lithium Metal Batteries.

An elastic and safe electrolyte is demanded for flexible batteries. Herein, a stretchable solid electrolyte comprised of crosslinked elastic polymer matrix, poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP), and flameproof triethyl phosphate (TEP) is fabricated, which exhibits ultrahigh elongation of 450%, nonflammability and ionic conductivity above 1 mS cm-1. In addition, in order to improve the interface compatibility between the electrolyte and Li anode and stabilize the solid-electrolyte interphase (SEI), a protecting layer containing poly(ethylene oxide) (PEO) is designed to effectively prevent the anode from reacting with TEP and optimize the chemical composition in SEI, leading to a tougher and more stable SEI on the anode. The LiFePO4/Li cells employing this double-layer electrolyte exhibit an 85.0% capacity retention after 300 cycles at 1 C. Moreover, a flexible battery based on this solid electrolyte is fabricated, which can work in stretched, folded, and twisted conditions. This design of a stretchable double-layer solid electrolyte provides a new concept for safe and flexible solid-state batteries.

Improved Ionic Conductivity and Li Dendrite Suppression Capability toward Li7P3S11-Based Solid Electrolytes Triggered by Nb and O Cosubstitution.

It is still a big challenge to simultaneously enhance the ionic conductivity, dendrite suppression capability, and interfacial compatibility of sulfide solid electrolytes. In this work, a novel Li7P2.88Nb0.12S10.7O0.3 solid electrolyte is prepared via Nb and O cosubstitution of glass-ceramic Li7P3S11. This sulfide-based electrolyte possesses a high ionic conductivity (3.59 mS cm-1) at 298 K, improved critical current density (1.16 mA cm-2), and excellent interfacial compatibility between the sulfide electrolyte and Li2S active material. The improved electrochemical stability of the sulfide solid electrolyte against metallic lithium is attributed to the formation of Nb and Li2O at the interface, which can induce uniform Li deposition and prevent further side reaction. The all-solid-state Li/Li2S batteries based on this electrolyte exhibit remarkably enhanced cycling stability and rate performance.

Correction to: Screening of pectinase-producing bacteria from citrus peel and characterization of a recombinant pectate lyase with applied potential.

In the original article.

Archives of microbiology: screening of pectinase-producing bacteria from citrus peel and characterization of a recombinant pectate lyase with applied potential.

Pectinase is widely used in numerous industrial fields, including the food, wine, and paper industries. In this work, seven bacteria were isolated from orange peel and their pectinase production activity was assayed. One bacterium (OR-B2) identified as a Bacillus sp. showed the highest enzyme activity towards others. A gene encoding a pectate lyase designed as PelB-B2 in this work was amplified and heterogeneous expressed in E.coli. PelB-B2 was defined as a member of the PelB pectate lyase family after phylogenic tree analysis. 3D model of PelB-B2 was constructed by SWISS-MODEL and PelB-B2 showed conserved para-ß structure. After inducing culture and purified by Ni-affinity chromatography, the properties of the purified PelB-B2 were assayed. Optimal pH and temperature for PelB-B2 was pH 8.0 and 50 °C, respectively. PelB-B2 showed excellent pH stability and thermostability. It was stable within pH range 3.0-11.0 and retained more than 51% activity after incubation at 40 °C, 50 °C, or 60 °C for 1 h. Furthermore, we determined that PelB-B2 was a Ca2+-dependent pectinase and the pectin extracted from citrus was the benefit substrate for PelB-B2. The Km and Vmax of PelB-B2 were 1.64 g/L and 232.56 mol/(L min), respectively. The OR-B2 can be a new resource for pectinase production and the PelB-B2 has potential for industrial application. 7 bacteria were isolated from orange peel, namely OR-B1 to OR-B7 and their pectinase activities were assayed. One pectate lyase belongs to PelB family was cloned from OR-B2 and heterogeneous expressed in E. coli. Purified PelB-B2 was further studied with its properties. Effects of pH, temperature, chemicals, substrate on the enzyme activity were assayed and the enzyme kinetic was also measured.

Porous Carbon Hosts for Lithium-Sulfur Batteries.

Lithium-sulfur batteries (LSBs) are considered to be one of the most promising alternatives to the current lithium-ion batteries (LIBs) to meet the increasing demand for energy storage owing to their high energy density, natural abundance, low cost, and environmental friendliness. Despite great success, LSBs still suffer from several problems, including undermined capacity arising from low utilization of sulfur, unsatisfactory rate performance and poor cycling life owing to the shuttle effect of polysulfides, and poor electrical conductivity of sulfur. Under such circumstances, the design/fabrication of porous carbon-sulfur composite cathodes is regarded as an effective solution to overcome the above problems. In this review, different synthetic methods of porous carbon hosts and their corresponding integration into carbon-sulfur cathodes are summarized. The pore formation mechanism of porous carbon hosts is also addressed. The pore size effect on electrochemical performance is highlighted and compared. The enhanced mechanism of the porous carbon host on the sulfur cathode is systematically reviewed and revealed. Finally, the combination of porous carbon hosts and high-profile solid-state electrolytes is demonstrated, and the challenges to realize large-scale commercial application of porous carbon-sulfur cathodes is discussed and future trends are proposed.

Bi-containing Electrolyte Enables Robust and Li Ion Conductive Solid Electrolyte Interphase for Advanced Lithium Metal Anodes.

The notorious lithium dendrite growth, causing the safety concern, hinders the practical application of high-capacity Li metal anodes for rechargeable batteries. Here, a robust and highly ionic conductive solid electrolyte interphase (SEI) layer to protect Li metal anode is in-situ constructed by introducing trace additive of tetrapotassium heptaiodobismuthate (K4BiI7) into electrolyte. The K4BiI7-added electrolyte enables Li metal anode to display a stable cycling for over 600 cycles at 1.0 mA cm-2/1.0 mAh cm-2 and over 400 cycles at 5.0 mA cm-2/5.0 mAh cm-2. In situ optical microscopy observations also conform the suppression of Li dendrites at high current density. Moreover, the in-situ SEI layer modified Li anode exhibits an average Coulombic efficiency of 99.57% and less Li dendrite growth. The Li-S full sells with the modified electrolyte also show improved electrochemical performance. This research provides a cost-efficient method to achieve a highly ionic conductive and stable SEI layer toward advanced Li metal anodes.

Metal-Embedded Porous Graphitic Carbon Fibers Fabricated from Bamboo Sticks as a Novel Cathode for Lithium-Sulfur Batteries.

Lithium-sulfur batteries (LSBs) are deemed to be among the most prospective next-generation advanced high-energy batteries. Advanced cathode materials fabricated from biological carbon are becoming more popular due to their unique properties. Inspired by the fibrous structure of bamboo, herein we put forward a smart strategy to convert bamboo sticks for barbecue into uniform bamboo carbon fibers (BCF) via a simple hydrothermal treatment proceeded in alkaline solution. Then NiCl2 is used to etch the fibers through a heat treatment to achieve Ni-embedded porous graphitic carbon fibers (PGCF/Ni) for LSBs. The designed PGCF/Ni/S electrode exhibits improved electrochemical performances including high initial capacity (1198 mAh g-1 at 0.2 C), prolonged cycling life (1030 mAh g-1 at 0.2 C after 200 cycles), and improved rate capability. The excellent properties are attributed to the synergistic effect of 3D porous graphitic carbon fibers with highly conductive Ni nanoparticles embedded.

Construction of Nitrogen-Doped Carbon-Coated MoSe2 Microspheres with Enhanced Performance for Lithium Storage.

Exploring advanced anode materials with highly reversible capacity have gained great interests for large-scale lithium storage. A facile two-step method is developed to synthesize nitrogen-doped carbon coated MoSe2 microspheres via hydrothermal plus thermal polymerization. The MoSe2 microspheres composed of interconnected nanoflakes are homogeneously coated by a thin nitrogen-doped carbon (N-C) layer. As an anode for lithium ion batteries, the MoSe2 /N-C composite shows better reversibility, smaller polarization, and higher electrochemical reactivity as compared to the unmodified MoSe2 microspheres. The MoSe2 /N-C electrode delivers a high specific capacity of 698 mAh g-1 after 100 cycles at a current density of 100 mA g-1 and good high rate performance (471 mAh g-1 at a high current density of 2000 mA g-1 ). The improved electrochemical performance is attributed to the conductive N-C coating and hierarchical microsphere structure with fast ion/electron transfer characteristics.

Performance Enhancement of a Sulfur/Carbon Cathode by Polydopamine as an Efficient Shell for High-Performance Lithium-Sulfur Batteries.

Lithium-sulfur batteries (LSBs) are considered to be among the most promising next-generation high-energy batteries. It is a consensus that improving the conductivity of sulfur cathodes and impeding the dissolution of lithium polysulfides are two key accesses to high-performance LSBs. Herein we report a sulfur/carbon black (S/C) cathode modified by self-polymerized polydopamine (pDA) with the assistance of polymerization treatment. The pDA acts as a novel and effective shell on the S/C cathode to stop the shuttle effect of polysulfides. By the synergistic effect of enhanced conductivity and multiple blocking effect for polysulfides, the S/C@pDA electrode exhibits improved electrochemical performances including large specific capacity (1135 mAh g-1 at 0.2 C), high rate capability (533 mAh g-1 at 5 C) and long cyclic life (965 mAh g-1 after 200 cycles). Our smart design strategy may promote the development of high-performance LSBs.

Vertical-Aligned Li2 S-Graphene Encapsulated within a Carbon Shell as a Free-Standing Cathode for Lithium-Sulfur Batteries.

Construction of a novel matrix with both high conductivity and an excellent confinement effect for polysulfides is of great importance for developing high-performance lithium-sulfur (Li-S) batteries. In this work, we have developed a double-modification strategy to integrate lithium sulfide (Li2 S) into a conductive composite network consisting of vertical graphene (VG) arrays and an amorphous carbon shell, forming an integrated cathode (VG/Li2 S-C). Facile liquid-solution/evaporation methods in combination with chemical vapor deposition were successfully adopted for preparation of the above cathode. Due to the enhanced electrical conductivity and noticeable blocking effect for the shuttle of polysulfides, the binder-free flexible VG/Li2 S-C cathode exhibits high rate performance and reinforced cycles (656.2 mAh g-1 after 100 cycles). The pronounced electrochemical performance is ascribed to the unique architecture with a coherent conductive network of VG and the carbon shell, which not only provides a conductive network for fast reaction kinetics, but also forms a durable protective shield to suppress the shuttle of polysulfides. Our research further demonstrates the synergistic effectiveness by means of inner and outer carbon matrixes for electrochemical enhancement of Li-S batteries.

Nitrogen-Doped Carbon Embedded MoS2 Microspheres as Advanced Anodes for Lithium- and Sodium-Ion Batteries.

Rational design and synthesis of advanced anode materials are extremely important for high-performance lithium-ion and sodium-ion batteries. Herein, a simple one-step hydrothermal method is developed for fabrication of N-C@MoS2 microspheres with the help of polyurethane as carbon and nitrogen sources. The MoS2 microspheres are composed of MoS2 nanoflakes, which are wrapped by an N-doped carbon layer. Owing to its unique structural features, the N-C@MoS2 microspheres exhibit greatly enhanced lithium- and sodium-storage performances including a high specific capacity, high rate capability, and excellent capacity retention. Additionally, the developed polyurethane-assisted hydrothermal method could be useful for the construction of many other high-capacity metal oxide/sulfide composite electrode materials for energy storage.

Nickel Hydroxide-Modified Sulfur/Carbon Composite as a High-Performance Cathode Material for Lithium Sulfur Battery.

Tailored sulfur cathode is vital for the development of a high performance lithium-sulfur (Li-S) battery. A surface modification on the sulfur/carbon composite would be an efficient strategy to enhance the cycling stability. Herein, we report a nickel hydroxide-modified sulfur/conductive carbon black composite (Ni(OH)2@S/CCB) as the cathode material for the Li-S battery through the thermal treatment and chemical precipitation method. In this composite, the sublimed sulfur is stored in the CCB, followed by a surface modification of Ni(OH)2 nanoparticles with size of 1-2 nm. As a cathode for the Li-S battery, the as-prepared Ni(OH)2@S/CCB electrode exhibits better cycle stability and higher rate discharge capacity, compared with the bare S/CCB electrode. The improved performance is largely due to the introduction of Ni(OH)2 surface modification, which can effectively suppress the "shuttle effect" of polysulfides, resulting in enhanced cycling life and higher capacity.