Resistance of a PdAu12(8e) Core to Growth in Collision-Induced Sequential Reductive Elimination of (C≡CR)2 from [PdAu24(C≡CR)18]2.

Previous studies have reported that [PdAu24(PAF)18]2- (PAF = 3,5-(CF3)2C6H3C≡C) with an icosahedral superatomic PdAu12(8e) core underwent collision-induced sequential reductive elimination (CISRE) of 1,3-diyne (PAF)2 ( J. Phys. Chem. C 2020, 124, 19119). The most likely scenario after the CISRE of (PAF)2 is the growth of the PdAu12(8e) core via the fusion of the Au(0) atoms produced from the Au2(PAF)3 units on the core surface. Contrary to expectation, anion photoelectron spectroscopy and theoretical calculations regarding the CISRE products [PdAu24(PAF)18-2n]2- (n = 1-6) revealed that the electronically closed PdAu12(8e) core does not grow to a single superatom with (8 + 2n)e but assembles with Au2(2e) units. Characterization of the CISRE products of other alkynyl-protected Au clusters suggested that even the non-superatomic Au17(8e) core was resistant to growth due probably to rigidification by PA ligands. We propose that there is a kinetic bottleneck in the growth process of protected Au clusters at the stage where they are electronically closed and/or lose their structural fluxionality by ligation.

Distribution of habitat suitability for Suaeda salsa in the Liaohe River Estuary and its relationship with carbon storage.

Suaeda salsa acts as a natural barrier between land and sea in estuarine wetlands while also serving as a significant source of carbon storage. Understanding the synergistic relationship between the spatial distribution of Suaeda salsa habitat suitability and its carbon storage capabilities is essential for guiding ecological restoration and bolstering the carbon sequestration potential of wetlands. Drawing on field survey data from the Liaohe River Estuary wetlands collected in 2021 and 2022, we applied the Maxent model to delineate the spatial distribution of Suaeda salsa habitat suitability. The findings indicate that the principal environmental determinants for the Suaeda salsa community are elevation, soil phosphorus, and sand and soil salt content. Habitats can be divided from into four classes with increasing suitability index: I, II, III, and IV. As the most favorable habitat, class IV spanned 33.07 km2 and constituted 22.37 % of the area. By integrating remote sensing and ground survey data, a carbon storage evaluation model for Suaeda salsa was developed. This model revealed that the carbon storage within the Liaohe River Estuary reached 8238.18 and 16,194.08 tons in 2021 and 2022, respectively. Finally, the spatial overlay analysis of habitat suitability distribution and carbon storage revealed that an increase in habitat suitability led to an increase in carbon storage in Suaeda salsa, which was also influenced by the surrounding land use types. This work demonstrates a significant positive correlation between habitat suitability and carbon sequestration capacity. In the future, we suggest that ecological restoration projects in the Liaohe Estuary region focus on areas with higher habitat suitability. This study supports the sustainable management of the Suaeda salsa community and provides a theoretical basis for enhancing the carbon sequestration capacity of estuarine wetlands.

Interplay of kernel shape and surface structure for NIR luminescence in atomically precise gold nanorods.

It is challenging to attain strong near-infrared (NIR) emissive gold nanoclusters. Here we show a rod-shaped cluster with the composition of [Au28(p-MBT)14(Hdppa)3](SO3CF3)2 (1 for short, Hdppa is N,N-bis(diphenylphosphino)amine, p-MBT is 4-methylbenzenethiolate) has been synthesized. Single crystal X-ray structural analysis reveals that it has a rod-like face-centered cubic (fcc) Au22 kernel built from two interpenetrating bicapped cuboctahedral Au15 units. 1 features NIR luminescence with an emission maximum at 920 nm, and the photoluminescence quantum yield (PLQY) is 12%, which is 30-fold of [Au21(m-MBT)12(Hdppa)2]SO3CF3 (2, m-MBT is 3-methylbenzenethiolate) with a similar composition and 60-fold of Au30S(S­t­Bu)18 with a similar structure. time-dependent DFT(TDDFT)calculations reveal that the luminescence of 1 is associated with the Au22 kernel. The small Stokes shift of 1 indicates that it has a very small excited state structural distortion, leading to high radiative decay rate (kr) probability. The emission of cluster 1 is a mixture of phosphorescence and thermally activated delayed fluorescence(TADF), and the enhancement of the NIR emission is mainly due to the promotion of kr rather than the inhibition of knr. This work demonstrates that the metal kernel and the surface structure are both very important for cluster-based NIR luminescence materials.

All-Calixarene-Protected Silver Nanocluster with All Silver Atoms in a Face-Centered Cubic Arrangement.

Tailoring the surface ligands of metal nanoclusters is important for engineering unique configurations of metal nanoclusters. Thiacalix[4]arene has found extensive applications in the construction of metal nanoclusters. In this investigation, we present the synthesis and characterization of the first all-calixarene-protected silver nanoclusters, [Ag(CH3CN)4]2[Ag44(BTCA)6] (Ag44, H4BTCA = p-tert-butylthiacalix[4]arene). Single-crystal X-ray structural analysis reveals that all silver atoms are in a face-centered cubic (fcc) arrangement. The formation of such an fcc structure is attributed to the selectively passivation on {100} facets by BTCA4-. Thiacalixarene substantially facilitates the stability of Ag44 due to its multiple coordination sites and bulkiness. Mass spectrometry and theoretical calculations reveal that Ag44 is a superatomic silver nanocluster with 22 free electrons in the following configuration: 1S21P61D61F22S21D4. This work not only elucidates the impact of macrocyclic ligands on the stabilization of silver clusters but also furnishes an approach for assembling atomically precise fcc nanoclusters.

Large Scale Synthesis of a Stable Prefunctionalized Silver Nanocluster.

Due to the stability issue, It is difficult to prepare a silver nanocluster bearing functional sites, especially at a large scale. We report the synthesis and structure of a stable silver nanocluster bearing multiple surface aldehyde groups [Ag21(Ph2PO2)10(p-CHOPhC≡C)6]SbF6, which allows for postsynthesis modification such as surface functionalization through aldimine condensation to give homochiral clusters. Remarkably, the preparation of this cluster can be done in ~90 % high yield at gram scale, which facilitates further studies and potential applications. Through DFT calculations and geometric structure analysis, the high stability of this cluster is attributed to the geometric closure and electronic structure. This is the first time that an effective one-pot method has been developed to synthesize functional silver nanoclusters in high yield. The title cluster will be useful in the development of a variety of cluster-based materials.

'Passivated Precursor' Approach to All-Alkynyl-Protected Gold Nanoclusters and Total Structure Determination of Au130.

A 'passivated precursor' approach is developed for the efficient synthesis and isolation of all-alkynyl-protected gold nanoclusters. Direct reduction of dpa-passivated precursor Au-dpa (Hdpa=2,2'-dipyridylamine) in one-pot under ambient conditions gives a series of clusters including Au22(C≡CR)18 (R=-C6H4-2-F), Au36(C≡CR)24, Au44(C≡CR)28, Au130(C≡CR)50, and Au144(C≡CR)60. These clusters can be well separated via column chromatography. The overall isolation yield of this series of clusters is 40 % (based on gold), which is much improved in comparison with previous approaches. It is notable that the molecular structure of the giant cluster Au130(C≡CR)50 is revealed, which presents important information for understanding the structure of the mysterious Au130 nanoclusters. Theoretical calculations indicated Au130(C≡CR)50 has a smaller HOMO-LUMO gap than Au130(S-C6H4-4-CH3)50. This facile and reliable synthetic approach will greatly accelerate further studies on all-alkynyl-protected gold nanoclusters.

A Cages-on-Cluster Structure Constructed by Post-Clustering Covalent Modifications and Guest-Enabled Stimuli-Responsive Luminescence.

A gold(I)-cluster-based twin-cage has been constructed by post-clustering covalent modification of a hexa-aldehyde cluster precursor with triaminotriethylamines. The cages-on-cluster structure has double cavities and four binding sites, which show site-discriminative binding for silver(I) and copper(I) guests. The guests in the tripodal hats affect the luminescence of the cluster: the tetra-silver(I) host-guest complex is weakly red-emissive, while the bis-copper(I)-bis-silver(I) one is non-emissive but is a stimuli-responsive supramolecule. The copper(I) ion inside the tri-imine cavity is oxidation sensitive, which enables the release of the bright emissive precursor cluster triggered by H2O2 solution. The hybridization of a cluster with cavities to construct a cluster-based cage presents an innovative concept for functional cluster design, and the post-clustering covalent modification opens up new avenues for finely tuning the properties of clusters.

Near-unity NIR phosphorescent quantum yield from a room-temperature solvated metal nanocluster.

Metal nanoclusters have emerged as promising near-infrared (NIR)-emissive materials, but their room-temperature photoluminescence quantum yield (PLQY), especially in solution, is often low (<10%). We studied the photophysics of Au22(tBuPhC≡C)18 (Au22) and its alloy counterpart Au16Cu6(tBuPhC≡C)18 (Au16Cu6) (where tBu is tert-butyl and Ph is phenyl) and found that copper (Cu) doping suppressed the nonradiative decay (~60-fold less) and promoted intersystem crossing rate (~300-fold higher). The Au16Cu6 nanocluster exhibited >99% PLQY in deaerated solution at room temperature with an emission maximum at 720 nanometers tailing to 950 nanometers and 61% PLQY in the oxygen-saturated solution. The approach to achieve near-unity PLQY could enable the development of highly emissive metal cluster materials.

Heterometallic AuI 6 AgI 6 Macrocyclic Cluster Templated by a Supramolecular Melamine Dimer.

The application of supramolecular templates in aligning atomically precise heterometal arrays is important for pursuing functional materials. Herein, we report that a bilayered supramolecular tri-deprotonated melamine dimer functions as an effective template in the construction of a heterometallic gold(I)-silver(I) macrocyclic cluster [µ6 -(C3 N6 H3 )3- ]2 -AuI 6 AgI 6 . X-ray single crystal structural analysis showed that a crown-like AuI 6 AgI 6 macrocycle is aligned around two parallelly stacked µ6 -(C3 N6 H3 )3- moieties hold together with π-π interactions. Theoretical calculations revealed that the [µ6 -(C3 N6 H3 )3- ]2 motif dominantly contributes to the near-occupied orbitals in the electronic structure, which is closely related to its luminescence properties. This work demonstrates that the supramolecular templates containing multiple symmetric binding sites may present a facile approach in the construction of functional metal clusters.

Alkynyl-Protected Bimetallic Nanoclusters with a Hybrid Mackay Icosahedral Ag42 Cu12 Cl Kernel and an Octahedral Ag22 Cu12 Kernel.

A facile strategy that directly reduces alkynyl-silver precursors and copper salts for the synthesis of bimetallic nanoclusters using the weak reducing agent Ph2 SiH2 is demonstrated. Two alkynyl-protected concentric-shell nanoclusters, (Ph4 P)2 [Ag22 Cu12 (C≡CR)28 ] and (Ph4 P)3 [Ag42 Cu12 Cl(C≡CR)36 ] (Ag22 Cu12 and Ag42 Cu12 Cl, R=bis(trifluoromethyl)phenyl), were successfully obtained and characterized by single-crystal X-ray diffraction and electro-spray ionization mass spectrometry. For the first time, a hybrid 55-atom two-shell Mackay icosahedron was found in Ag42 Cu12 Cl, which is icosahedral M54 Cl instead of M55 . The incorporation of a chloride in the metal icosahedron contributes to the stability of the cluster from both electronic and geometric aspects. Alkynyl ligands show various binding-modes including linear "RC≡C-Cu-C≡CR" staple motifs.

Integration of Metal Catalysis and Organocatalysis in a Metal Nanocluster with Anchored Proline.

Chiral metal nanoclusters have recently been attracting great attention. It is challenging to realize asymmetric catalysis via atomically precise metal nanoclusters. Herein, we report the synthesis and total structure determination of chiral clusters [Au7Ag8(dppf)3(l-/d-proline)6](BF4)2 (l-/d-Au7Ag8). Superatomic clusters l-/d-Au7Ag8 display intense and mirror-image Cotton effects in their CD spectra. Density functional theory (DFT) calculations were carried out to understand the correlation between electronic structures and the optical activity of the enantiomeric pair. Surprisingly, the incorporation of proline in a metal nanocluster can significantly promote the catalytic efficiency in asymmetric Aldol reactions. The increase of catalytic activity of Au7Ag8 in comparison with organocatalysis by proline is attributed to the cooperative effect of the metal core and prolines, showing the advantages of the integration of metal catalysis and organocatalysis in a metal nanocluster.

Insufficiency of collagenases in establishment of primary chondrocyte culture from cartilage of elderly patients receiving total joint replacement.

Background Collagenases are frequently used in chondrocyte isolation from articular cartilage. However, the sufficiency of this enzyme in establishing primary human chondrocyte culture remains unknown. Methods Cartilage slices shaved from femoral head or tibial plateau of patients receiving total joint replacement surgery (16 hips, 8 knees) were subjected to 0.02% collagenase IA digestion for 16 h with (N = 19) or without (N = 5) the pre-treatment of 0.4% pronase E for 1.5 h. Chondrocyte yield and viability were compared between two groups. Chondrocyte phenotype was determined by the expression ratio of collagen type II to I. The morphology of cultured chondrocytes was monitored with a light microscope.Results Cartilage with pronase E pre-treatment yielded significantly higher chondrocytes than that without the pre-treatment (3,399 ± 1,637 cells/mg wet cartilage vs. 1,895 ± 688 cells/mg wet cartilage; P = 0.0067). Cell viability in the former group was also significantly higher than that in the latter (94% ± 2% vs. 86% ± 6%; P = 0.03). When cultured in monolayers, cells from cartilage with pronase E pre-treatment grew in a single plane showing rounded shape while cells from the other group grew in multi-planes and exhibited irregular shape. The mRNA expression ratio of collagen type II to I was 13.2 ± 7.5 in cells isolated from cartilage pre-treated with pronase E, indicating a typical chondrocyte phenotype. Conclusions Collagenase IA was not sufficient in establishing primary human chondrocyte culture. Cartilage must be treated with pronase E prior to collagenase IA application.

Disc-Like Silver Nanocluster Ag93 Built with Bicapped Hexagonal Prismatic Ag15 and Ino Decahedral Ag13 Units.

The reduction of alkynyl-silver and phosphine-silver precursors with a weak reducing reagent Ph2 SiH2 led to the formation of a novel silver nanocluster [Ag93 (PPh3 )6 (C≡CR)50 ]3+ (R=4-CH3 OC6 H4 ), which is the largest structurally characterized cluster of clusters. This disc-shaped cluster has a Ag69 kernel consisting of a bicapped hexagonal prismatic Ag15 unit wrapped by six Ino decahedra through edge-sharing. This is the first time that Ino decahedra are used as a building block to assemble a cluster of clusters. Moreover, the central silver atom has a coordination number of 14, which is the highest in metal nanoclusters. This work provides a diverse metal packing pattern in metal nanoclusters, which is helpful for understanding metal cluster assembling mechanisms.

Face-Centered Cubic Silver Nanoclusters Consolidated with Tetradentate Formamidinate Ligands.

Growing attention has been paid to nanoclusters with face-centered cubic (fcc) metal kernels, due to its structural similarity to bulk metals. We demonstrate that the use of tetradentate formamidinate ligands facilitate the construction of two fcc silver nanoclusters: [Ag52(5-F-dpf)16Cl4](SbF6)2 (Ag52, 5-F-Hdpf = N,N'-di(5-fluoro-2-pyridinyl)formamidine) and [Ag53(5-Me-dpf)18](NO3)5 (Ag53, 5-Me-Hdpf = N,N'-di(5-methyl-2-pyridinyl)formamidine). Single-crystal X-ray structural analysis revealed that the silver atoms in both clusters are in a layer-by-layer arrangement, which can be viewed as a portion of the fcc packing of silver. The nitrogen donors of amidinate ligands selectively passivate the {111} facets. All silver atoms are involved in the fcc packing, that is, no staple motifs are observed due to the linear arrangement of the four N donors of the dpf ligands. The characteristic optical absorption bands of Ag52 and Ag53 have been studied with a time-dependent density functional theory. This work provides a facile access to assembling atomically precise fcc-type nanoclusters and shows the prospect of amidinates as protecting ligands in synthesizing metal nanoclusters.

Structural Engineering toward Gold Nanocluster Catalysis.

Atomically precise gold nanoclusters provide great opportunities to explore the relationship between the structure and properties of nanogold catalysts. A nanocluster consists of a metal core and a surface ligand shell, and both the core and shell have significant effects on the catalytic properties. Thanks to their precise structures, the active metal site of the clusters can be readily identified and the effects of ligands on catalysis can be disclosed. In this Minireview, we summarize recent advances in catalytic research of gold nanoclusters, emphasizing four strategies for constructing open metal sites, including by post-treatment, the bulky ligands strategy, the surface geometric mismatch method, and heteroatom doping procedures. We also discuss the effects of ligands on the catalytic activity, selectivity, and stability of gold cluster catalysts. Finally, we present future challenges relating to gold cluster catalysis.

Site-specific doping of silver atoms into a Au25 nanocluster as directed by ligand binding preferences.

For the first time site-specific doping of silver into a spherical Au25 nanocluster has been achieved in [Au19Ag6(MeOPhS)17(PPh3)6] (BF4)2 (Au19Ag6) through a dual-ligand coordination strategy. Single crystal X-ray structural analysis shows that the cluster has a distorted centered icosahedral Au@Au6Ag6 core of D 3 symmetry, in contrast to the I h Au@Au12 kernel in the well-known [Au25(SR)18]- (R = CH2CH2Ph). An interesting feature is the coexistence of [Au2(SPhOMe)3] dimeric staples and [P-Au-SPhOMe] semi-staples in the title cluster, due to the incorporation of PPh3. The observation of only one double-charged peak in ESI-TOF-MS confirms the ordered doping of silver atoms. Au19Ag6 is a 6e system showing a distinct absorption spectrum from [Au25(SR)18]-, that is, the HOMO-LUMO transition of Au19Ag6 is optically forbidden due to the P character of the superatomic frontier orbitals.

Identification of the Active Species in Bimetallic Cluster Catalyzed Hydrogenation.

Identification of the authentic active species of cluster catalysis is rather challenging, and direct structural evidence is quite valuable and difficult to obtain. Two "isostructural" clusters, Ag25Cu4Cl6(dppb)6(PhC≡C)12(SO3CF3)3 (1) and Ag25Cu4Cl6H8(dppb)6(PhC≡C)12(SO3CF3)3 (2H) (dppb is 1,4-bis(diphenylphosphine)butane), have been successfully isolated and structurally characterized. Both these clusters have a centered icosahedron Ag13 core with the same peripheral composition and structure. The only difference is that 2H has eight hydrides but 1 has none, that is, the kernels are Ag135+ and Ag13H85+ in 1 and 2H, respectively. The catalytic reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) as a model reaction is assessed with the two clusters. Cluster 2H is very active with 100% yield within 2 h, whereas 1 shows a very low conversion (∼8%) under the same conditions. Interestingly, high catalytic activity was observed when 1 was converted to 2H with the oxidation of H2O2 under catalytic conditions. The unprecedented transformation of a reduced nanocluster to an Ag(I)Cu(I) bimetallic cluster compound provides an excellent platform to determine the real active cluster in terms of metal cluster catalysis. The present work presents clear structural evidence that the catalytic performance of metal nanoclusters can be modulated by properly regulating the oxidation state of their constituted metal atoms.

Anion-Directed Regulation of Structures and Luminescence of Heterometallic Clusters.

Anions have been used to regulate the structures and luminescence of heterometallic clusters. Introducing ClO4 - into orange-emissive, butterfly-like [(C)(Au-PPhpy2 )6 Ag4 ](BF4 )6 (1, PPhpy2 =bis(2-pyridyl)phenylphosphine) leads to the formation of red-emissive [(C)(Au-PPhpy2 )6 Ag5 (ClO4 )3 ](ClO4 )4 (2) with a novel trigonal bipyramidal structure; employing PhCO2 - gives yellow-emissive, hexagram-like [(C)(Au-PPhpy2 )6 Ag6 (PhCO2 )3 ](BF4 )5 (3). Notably, 1 exhibits weak luminescence in CH2 Cl2 /CH3 OH=1 : 1 (v : v) with a quantum yield (QY) of 0.05, whereas it was dramatically increased to 0.49 and 0.83 for 2 and 3, respectively. Theoretical calculation confirms that the involvement of anions in the electronic structures is responsible for the shifts of emission. The high QYs of 2 and 3 are attributed to the protection provided by ligands and anions. This work demonstrates that anions may serve as an extra designable factor beyond just counterions for functional metal clusters.

Structural transformation and catalytic hydrogenation activity of amidinate-protected copper hydride clusters.

Copper hydrides are important hydrogenation catalysts, but their poor stability hinders the practical applications. Ligand engineering is an effective strategy to tackle this issue. An amidinate ligand, N,N'-Di(5-trifluoromethyl-2-pyridyl)formamidinate (Tf-dpf) with four N-donors has been applied as a protecting agent in the synthesis of stable copper hydride clusters: Cu11H3(Tf-dpf)6(OAc)2 (Cu11) with three interfacial µ5-H and [Cu12H3(Tf-dpf)6(OAc)2]·OAc (Cu12) with three interstitial µ6-H. A solvent-triggered reversible interconversion between Cu11 and Cu12 has been observed thanks to the flexibility of Tf-dpf. Cu11 shows high activity in the reduction of 4-nitrophenol to 4-aminophenol, while Cu12 displays very low activity. Deuteration experiments prove that the type of hydride is the key in dictating the catalytic activity, for the interfacial µ5-H species in Cu11 are involved in the catalytic cycle whereas the interstitial µ6-H species in Cu12 are not. This work highlights the role of hydrides with regard to catalytic hydrogenation activity.

Nitrogen Donor Protection for Atomically Precise Metal Nanoclusters.

Surface organic ligands are critical in dictating the structures and properties of atomically precise metal nanoclusters. In contrast to the conventionally used thiolate, phosphine and alkynyl ligands, nitrogen donor ligands have not been used in the protection for well-defined metal nanoclusters until recently. This review focuses on recent developments in atomically precise metal nanoclusters stabilized by different types of nitrogen donor ligands, in which the synthesis, total structure determination and various properties are covered. We hope that this review will provide insights into the rational design of N donor-protected metal nanoclusters in terms of structural and functional modulation.