Tandem Electric-Fields Prolong Energetic Hot Electrons Lifetime for Ultra-Fast and Stable NO2 Detection.

Prolonging energetic hot electrons lifetimes and surface activity in the reactive site can overcome the slow kinetics and unfavorable thermodynamics of photo-activated gas sensors. However, bulk and surface recombination limit the simultaneous optimization of both kinetics and thermodynamics. Here tandem electric fields are deployed at (111)/(100)Au-CeO2 to ensure a sufficient driving force for carrier transfer and elucidate the mechanism of the relationship between charge transport and gas-sensing performance. The asymmetric structure of the (111)/(100)CeO2 facet junction provides interior electric fields, which facilitates electron transfer from the (100)face to the (111)face. This separation of reduction and oxidation reaction sites across different crystal faces helps inhibit surface recombination. The increased electron concentration at the (111)face intensifies the interface electric field, which promotes electron transfer to the Au site. The local electric field generated by the surface plasmon resonance effect promotes the generation of high-energy energy hot-electrons, which maintains charge concentration in the interface field by injecting into (111)/(100)CeO2, thereby provide thermodynamic contributions and inhibit bulk recombination. The tandem electric fields enable the (111)/(100)Au-CeO2 to rapidly detect 5 ppm of NO2 at room temperature with stability maintained within 20 s.

Crystal Face-Dependent Behavior of Single-Atom Pt: Construct of SA-FLP Dual Active Sites for Efficient NO2 Detection.

The strong potential of platinum single atom (PtSA) in gas sensor technology is primarily attributed to its high atomic economy. Nevertheless, it is imperative to conduct further exploration to understand the impact of PtSA on the active sites. In this study, the evolution of PtSA on (100)CeO2 and (111)CeO2 is examined, revealing notable disparities in the position and activity of surface PtSA on different crystal planes. The PtSA in (100)CeO2 surface can enhance the stability of Ce3+ and construct a frustrated Lewis pair (FLP) to form a double active site by combining the steric hindrance effect of oxygen vacancies, which increases the response value from 1.8 to 27 and reduce the response-recovery time from 140-192 s to 25-26 s toward five ppm NO2 at room temperature. Conversely, PtSA tends to bind to terminal oxygen on the surface of (111)CeO2 and become an independent reaction site. The response value of PtSA-(111)CeO2 surface only increased from 1.6 to 3.8. This research underscores the correlation between single atoms and crystal plane effects, laying the groundwork for designing and synthesizing ultra-stable and efficient gas sensors.

Progress of One-Dimensional SiC Nanomaterials: Design, Fabrication and Sensing Applications.

One-dimensional silicon carbide (SiC) nanomaterials hold great promise for a series of applications, such as nanoelectronic devices, sensors, supercapacitors, and catalyst carriers, attributed to their unique electrical, mechanical, and physicochemical properties. Recent progress in their design and fabrication has led to a deep understanding of the structural evolution and structure-property correlation. Several unique attributes, such as high electron mobility, offer SiC nanomaterials an opportunity in the design of SiC-based sensors with high sensitivity. In this review, a brief introduction to the structure and properties of SiC is first presented, and the latest progress in design and fabrication of one-dimensional SiC nanomaterials is summarized. Then, the sensing applications of one-dimensional SiC nanomaterials are reviewed. Finally, our perspectives on the important research direction and future opportunities of one-dimensional SiC nanomaterial for sensors are proposed.

Observation of delocalization transition in topological waveguide arrays with long-range interactions.

Topological edge states are a generic feature of topological insulators, and the long-range interactions, which break certain properties of topological edge states, are always non-negligible in real physical systems. In this Letter, we investigate the influence of next-nearest-neighbor (NNN) interactions on the topological properties of the Su-Schrieffer-Heeger (SSH) model by extracting the survival probabilities at the boundary of the photonic lattices. By introducing a series of integrated photonic waveguide arrays with different strengths of long-range interactions, we experimentally observe delocalization transition of light in SSH lattices with nontrivial phase, which is in good agreement with our theoretical predictions. The results indicate that the NNN interactions can significantly affect the edge states, and that the localization of these states can be absent in topologically nontrivial phase. Our work provides an alternative way to investigate the interplay between long-range interactions and localized states, which may stimulate further interest in topological properties in relevant structures.

Arbitrarily rotated optical axis waveguide induced by a trimming line.

Rotated optical axis waveguides can facilitate on-chip arbitrary wave-plate operations, which are crucial tools for developing integrated universal quantum computing algorithms. In this paper, we propose a unique technique based on femtosecond laser direct writing technology to fabricate arbitrarily rotated optical axis waveguides. First, a circular isotropic main waveguide with a non-optical axis was fabricated using a beam shaping method. Thereafter, a trimming line was used to create an artificial stress field near the main waveguide to induce a rotated optical axis. Using this technique, we fabricated high-performance half- and quarter-wave plates. Subsequently, high-fidelity (97.1%) Pauli-X gate operation was demonstrated via quantum process tomography, which constitutes the basis for the full manipulation of on-chip polarization-encoded qubits. In the future, this work is expected to lead to new prospects for polarization-encoded information in photonic integrated circuits.

Ultralow birefringent glass waveguide fabricated by femtosecond laser direct writing.

Optical waveguides prepared by femtosecond laser direct writing have birefringent properties, which can affect polarization encoding and entanglement on chips. Here, we first propose a shape-stress dual compensation fabrication scheme to decrease birefringence. Ultralow birefringent waveguides (1 × 10-9) were obtained by controlling the cross sectional shape of the main waveguide and adjusting the position of the auxiliary lines. In addition, we prepared polarization-independent directional coupler and demonstrated the evolution of polarization-independent waveguide array with different polarized light. In the future, ultralow birefringent waveguides will be widely applied in polarization encoding and entangled quantum photonic integrated circuits.

Single NV centers array preparation and static magnetic field detection.

To solve the problem of static magnetic field detection accuracy and consistency, we prepared an array of single NV centers for static magnetic field vector and gradient detection using the femtosecond laser direct writing method. The prepared single NV centers are characterized by fewer impurity defects and good stress uniformity, with an average spatial positioning error of only 0.2 µm. This array of single NV centers can achieve high accuracy magnetic field vector and gradient measurement with GBZ≈-0.047 µT/µm in the Z-axis. This result provides a new idea for large-range, high-precision magnetic field vector and gradient measurements.

Research on Mfn2 Gene Expression in Hepatocellular Carcinoma and its Antitumor Mechanism.

Objective: To detect the expression level of the Mfn2 gene in hepatocellular carcinoma (HCC) and adjacent normal liver tissues and further analyze its anticancer effects. Methods: The expression levels of Mfn2, GLS1 and the autophagy-related proteins lc3b and Beclin1 in liver cancer and adjacent tissues in patients with liver cancer were detected by real-time-quantitative polymerase chain reaction (RT-qPCR). The HepG2 human HCC cell line was cultured in vitro, and the Mfn2 protein was stably expressed through transfection of a high Mfn2 expression plasmid. The Cell-Counting Kit-8 (CCK-8) method was used to observe the effect of Mfn2 overexpression on the activity of HepG2 cells. Furthermore, RT-qPCR and Western blotting were performed to detect the effects of Mfn2 overexpression on the protein expression of GLS1, Beclin1 and lc3b. Results: Compared with tissues adjacent to cancer tissues, the mRNA levels of Mfn2, GLS1, Beclin1 and lc3b in liver cancer tissues were lower. Compared with normal hepatocytes, the expression of Mfn2, Beclin1 and lc3b in HCC cells was decreased, but the expression of GLS1 was increased. Compared with the control group (NC) transfected with empty plasmid, Mfn2 overexpression led to significant time-dependent inhibition of HepG2 cell activity and GLS1 protein expression (P < .05). In addition, Mfn2 overexpression induced autophagy by triggering the expression of autophagy-related proteins Beclin-1 and lc3b in HCC cells (all P < .05). The effect of transfection with a high-dose Mfn2 plasmid was more obvious than that of transfection with a low-dose Mfn2 plasmid (all P < .05). Conclusions: The expression of Mfn2, GLS1, Beclin1 and lc3b in HCC was lower than in normal liver tissue. The expression of Mfn2, Beclin1 and lc3b in HCC cells was decreased, but the expression of GLS1 was increased. Overexpression of Mfn2 inhibited GLS1 gene expression by inhibiting the activity of HCC cells and promoted the expression of Beclin1 and lc3b to induce autophagy, thereby exerting an anticancer effect. Further research is needed to clarify the mechanism of Mfn2 activity.

Stepwise synthesis of a Zr-C-Si main chain polymer precursor for ZrC/SiC/C composite ceramics.

Novel polymers containing a refractory metal in the main chain are highly desired as ultra-high temperature ceramic precursors. Herein, a low oxidation state active species Cp2Zr(ii) with two semi-filled outer orbits was firstly obtained using Cp2ZrCl2 with Mg. This active species of Cp2Zr(ii) was subsequently copolymerized with (CH3)2Si(CH2Cl)2 to form a PZCS precursor with a Zr-C-Si main chain. The pathways of constructing the Zr-C-Si main chain were proposed based on the active species Cp2Zr(ii) polymerization combined with the auxiliary function of ·MgCl, quite different from the conventional understanding of using the Grignard reaction mechanism to explain the synthesis of metal-containing polymer precursors. The ceramic yield of the PZCS precursor at 900 °C is 43.9 wt%, and the ZrC/SiC/C composite preceramic powder was prepared by the pyrolysis of the PZCS precursor, which has important application prospects in ultra-high sonic aircraft and aero rocket engines. It is expected that this stepwise method of using refractory metal-containing active species to synthesize main-chain metallopolymers would provide significant guidance for preparing novel UHTCs precursors.

Indicators of suboptimal response to anti-tumor necrosis factor therapy in patients from China with inflammatory bowel disease: results from the EXPLORE study.

BACKGROUND: Prevalence of inflammatory bowel disease (IBD) is increasing in China. The EXPLORE study evaluated the incidence and indicators of suboptimal responses to first-line anti-tumor necrosis factor (TNF) in patients with ulcerative colitis (UC) or Crohn's disease (CD). We present results for the mainland China subgroup. METHODS: A retrospective chart review was performed in adults with IBD at 10 centers in mainland China who initiated anti-TNF therapy between 01 March 2010 and 01 March 2015. The cumulative incidence of suboptimal response to first-line anti-TNF therapy was assessed over 24 months using the Kaplan-Meier method. Indicators of suboptimal response were: dose escalation, discontinuation, augmentation with non-biologic therapy, or IBD-related surgery/hospitalization. At site initiation, a survey was conducted with participating physicians to identify barriers to anti-TNF use. RESULTS: Of 287 patients (72% male) examined, 16/35 (45.7%) with UC and 123/252 (48.8%) with CD experienced a suboptimal response to first-line anti-TNF therapy at any point during the observation period (median 27.6 and 40.0 months, respectively). At 1 and 2 years post anti-TNF initiation, the cumulative incidence of suboptimal response was 51.4% and 75.7% for UC and 45.4% and 57.0% for CD, respectively. Median time to first suboptimal response was 7.2 months for UC and 14.3 months for CD. The most frequent indicator of suboptimal response was discontinuation of anti-TNF therapy (9/16, 56.3%) for UC and IBD-related hospitalization for CD (69/123, 56.1%) followed by augmentation with non-biologic therapy for both cohorts (5/16, 31.3% for UC and 28/123, 22.8% for CD). Dose escalation was the least frequent indicator of suboptimal response to anti-TNF therapy (CD: 4/123, 3.3%; UC: not cited as an indicator). The cumulative incidence of suboptimal response within 4 months of first-line anti-TNF therapy (primary non-response) was over 30% in both cohorts. Financial reasons and reimbursement were identified by surveyed physicians as the most common barriers to prescribing an anti-TNF therapy. CONCLUSIONS: Over one-half of patients with IBD are at risk of experiencing a suboptimal response to first-line anti-TNF therapy at 2 years post-initiation in China. This study highlights a substantial unmet need associated with anti-TNF therapies in China. (Clinicaltrials.gov identifier: NCT03090139).

Phase customization in photonic integrated circuits with trimmed waveguides.

Accurate photon phase control on a chip is essential to improve the expandability and stability of photonic integrated circuits (PICs). Here, we propose a novel, to the best of our knowledge, on-chip static phase control method in which a modified line is added close to the normal waveguide with a lower-energy laser. By controlling the laser energy and the position and length of the modified line, the optical phase can be precisely controlled with low loss and a three-dimensional (3D) path. Customizable phase modulation ranging from 0 to 2π is performed with a precision of λ/70 in a Mach-Zehnder interferometer. The proposed method can customize high-precision control phases without changing the waveguide's original spatial path, which is expected to control the phase and solve the phase error correction problem during processing of large-scale 3D-path PICs.

General Strategy to Fabricate Porous Co-Based Bimetallic Metal Oxide Nanosheets for High-Performance CO Sensing.

Two-dimensional (2D) porous bimetallic oxide nanosheets are attractive for high-performance gas sensing because of their porous structures, high surface areas, and cooperative effects. Nevertheless, it is still a huge challenge to synthesize these nanomaterials. Herein, we report a general strategy to fabricate porous cobalt-based bimetallic oxide nanosheets (Co-M-O NSs, M = Cu, Mn, Ni, and Zn) with an adjustable Co/M ratio and the homogeneous composition using metal-organic framework (MOF) nanosheets as precursors. The obtained Co-M-O NS possesses the porous nanosheet structure and ultrahigh specific surface areas (146.4-220.7 m2 g-1), which enhance the adsorption of CO molecules, support the transport of electrons, and expose abundant active sites for CO-sensing reaction. As a result, the Co-M-O NS exhibited excellent sensing performances including high response, low working temperature, fast response-recovery, good selectivity and stability, and ppb-level detection limitation toward CO. In particular, the Co-Mn-O NS showed the highest response of 264% to 100 ppm CO at low temperature (175 °C). We propose that the excellent sensing performance is ascribed to the specific porous nanosheet structure, the relatively highly active Co3+ ratio resulting from cation substitution, and large amounts of chemisorbed oxygen species on the surface. Such a general strategy can also be introduced to design noble-metal-free bimetallic metal oxide nanosheets for gas sensing, catalysis, and other energy-related fields.

Adsorptive granulomonocytapheresis alters the gut bacterial microbiota in patients with active ulcerative colitis.

BACKGROUND: Ulcerative colitis (UC) is a refractory disease with unclear etiology. Studies have shown that UC is closely associated with gut microbiota dysbiosis. Adsorptive granulomonocytapheresis (GMA) using an Adacolumn has been found to treat UC effectively, but its underlying mechanism of treatment has not been fully elucidated. In this study, we aimed to investigate the influence of GMA on the gut microbiota in patients with active UC. METHODS: We conducted a single-center prospective analysis of patients with active UC who received GMA therapy and ultimately achieved clinical remission. Stool samples of healthy controls and patients before and after 5 or 10 sessions of GMA therapy were collected. Subsequently, high-throughput sequencing of the 16S rRNA V3 and V4 gene region of the stool was conducted and clustering of operational taxonomic units and species annotation were performed. RESULTS: Gut microbial profiles in patients with UC were characterized by low bacterial diversity. After 5 or 10 sessions of GMA therapy, the gut microbiota diversity in patients with UC increased and was similar to that of healthy controls. UC was further characterized by increased abundances of Proteobacteria and Bacteroides, as well as decreased abundances of Faecalibacterium, Roseburia, Firmicutes, and Dialister; however, after GMA therapy, the abundance of Bacteroides decreased, whereas those of Faecalibacterium, Roseburia, and Firmicutes increased. CONCLUSIONS: Active UC is associated with gut microbiota dysbiosis. GMA therapy exerts a strong regulatory effect on the gut microbiota in patients with UC.

Impaired CCR9/CCL25 signalling induced by inefficient dendritic cells contributes to intestinal immune imbalance in nonalcoholic steatohepatitis.

Abnormal crosstalk between gut immune and the liver was involved in nonalcoholic steatohepatitis (NASH). Mice with methionine choline-deficient (MCD) diet-induced NASH presented an imbalance of pro-(IL-6 and IFN-γ) and anti-inflammatory cytokines (IL-10) in the intestine. We also clarified that the ratio of CD4+ T cells and found that the NASH mesenteric lymph node (MLN) presents decreased numbers of CD4+Th17 cells but increased numbers of CD4+CD8+FoxP3+ regulatory T cells (Tregs). Furthermore, the intestinal immune imbalance in NASH was attributed to impaired gut chemokine receptor 9 (CCR9)/chemokine ligand 25 (CCL25) signalling, which is a crucial pathway for immune cell homing in the gut. We also demonstrated that CD4+CCR9+ T cell homing was dependent on CCL25 and that the numbers and migration abilities of CD4+CCR9+ T cells were reduced in NASH. Interestingly, the analysis of dendritic cell (DC) subsets showed that the numbers and retinal dehydrogenase (RALDH) activity of CD103+CD11b+ DCs were decreased and that the ability of these cells to upregulate CD4+ T cell CCR9 expression was damaged in NASH. Taken together, impaired intestinal CCR9/CCL25 signalling induced by CD103+CD11b+ DC dysfunction contributes to the gut immune imbalance observed in NASH.

Selective granulocyte and monocyte apheresis in inflammatory bowel disease: Its past, present and future.

The etiology and pathogenesis of inflammatory bowel disease (IBD), including ulcerative colitis and Crohn's disease, are not fully understood so far. Therefore, IBD still remains incurable despite the fact that significant progress has been achieved in recent years in its treatment with innovative medicine. About 20 years ago, selective granulocyte and monocyte apheresis (GMA) was invented in Japan and later approved by the Japanese health authority for IBD treatment. From then on this technique was extensively used for IBD patients in Japan and later in Europe. Clinical trials from Japan and European countries have verified the effectiveness and safety of GMA therapy in patients with IBD. In 2013, GMA therapy was approved by China State Food and Drug Administration for therapeutic use for the Chinese IBD patients. However, GMA therapy has not been extensively used in China, although a few clinical studies also showed that it was effective in clinical and endoscopic induction of remission in Chinese IBD patients with a high safety profile. This article reviews past history, present clinical application as well as the future prospective of GMA therapy for patients with IBD.

Efficacy and safety of adsorptive granulomonocytapheresis in Chinese patients with ulcerative colitis: A retrospective analysis of 50 cases with focus on factors impacting clinical efficacy.

BACKGROUND: Myeloid-derived leucocytes, a major source of inflammatory cytokines, play an important role in the exacerbation of ulcerative colitis (UC). Selective depletion of myeloid leucocytes by adsorptive granulomonocytapheresis (GMA) with an Adacolumn should alleviate inflammation and promote remission. However, there are discrepancies among the reported efficacy outcomes. This study aimed to evaluate the efficacy and safety of GMA in UC patients with a focus on factors affecting clinical efficacy. METHODS: This was a retrospective analysis of 50 patients with active UC who had received GMA therapy. GMA efficacy was evaluated based on the Rachmilewitz's clinical activity index (CAI) and Mayo endoscopic score for mucosal healing. Laboratory findings were analyzed to demonstrate any relationship with the GMA-responder or nonresponder feature. Adverse events were recorded during and after GMA therapy. RESULTS: The overall clinical remission rate (CAI ≤4) was 79.2%, and among these, the mucosal healing rate was 59.2%. The clinical remission rate was 69.2% in patients who received 5 GMA sessions and 82.3% in patients who received 10 sessions. Significantly higher baseline CAIs and lower albumin and hemoglobin levels were observed in nonremission cases compared with those who achieved remission. Four patients (8%) experienced transient adverse events, but none were severe. CONCLUSIONS: GMA was favored by patients because of its safety and nonpharmacological treatment options. Accordingly, UC patients were spared from pharmaceuticals after applying GMA therapy.

High-Temperature Gas Sensor Based on Novel Pt Single Atoms@SnO2 Nanorods@SiC Nanosheets Multi-heterojunctions.

Designing a novel heterojunction structure on a SiC gas sensing material is extremely desirable for high-performance gas sensors applied in harsh environments. Inspired by the unprecedented catalyzing effect of single-atom catalysts, here, we have sequentially loaded tin oxide nanorods (SnO2 NRs) and platinum single atoms (Pt SAs) on silicon carbide nanosheets (SiC NSs) to build a novel Pt SAs@SnO2 NRs@SiC NSs multi-heterojunction. Gas sensors based on Pt SAs@SnO2 NRs@SiC NSs show highly enhanced gas sensing performance, including high response (119.75 ± 3.90), ppb level detecting, short response/recovery time (∼14 and ∼ 20 s), good selectivity, and excellent stability under high temperature. Particularly, the Pt SAs@SnO2 NRs@SiC NSs gas sensor has a response larger than 30 even under 500 °C and possesses good long-term stability. Such improvement of sensing performance can be attributed to the catalyzing effect of Pt single atoms, band gap tuning of the SnO2 nanostructure, promoted electron transfer of SnO2@SiC, and high surface area of two-dimensional (2D) SiC nanosheets. This approach enlightens the perspective application of single-atom catalysts, small-size effect of SnO2 nanorods, and 2D nanostructure on gas sensing fields and provides new routes for designing new types of gas sensing materials.

In situ molten phase-assisted self-healing for maintaining fiber morphology during conversion from melamine diborate to boron nitride.

C3N6H6·2H3BO3 (M·2B) is a highly promising precursor of boron nitride (BN) fibers due to its eco-friendly and low-cost fabrication. However, it is still unclear why the fibers can maintain their morphology in spite of drastic weight loss (nearly 80 wt%) during M·2B-to-BN pyrolysis. Herein, an interesting cracking and self-healing behavior of the heated M·2B fibers was observed at initial pyrolysis. In situ formed molten boron oxide (B2O3) was figured out to be the healing agent for the cracks and subsequently merged into the continuous matrix enclosing melamine/melem molecules, which subsequently acted as a nitrogen source. The B2O3 matrix helped to keep the fiber morphology undamaged under the second weight-loss stage in the pyrolysis process. This strategy of taking advantage of the in situ formed molten phase for healing cracks offers detailed guidance to prepare defect-free M·2B-derived BN fibers and would be significant in defect repair for other ceramics.

The functionality of surface hydroxyls on selective CH4 generation from photoreduction of CO2 over SiC nanosheets.

The surface hydroxyls on SiC nanosheets provide local protons, stabilize intermediates and localize photogenerated electrons in the deep photoreduction of CO2, significantly promoting the efficiency and selectivity of CH4 yield. This study describes the surface reaction for selective CO2 reduction based on both thermodynamic and kinetic requirements.

In Situ-Fabricated 2D/2D Heterojunctions of Ultrathin SiC/Reduced Graphene Oxide Nanosheets for Efficient CO2 Photoreduction with High CH4 Selectivity.

Photoreduction of CO2 into fuel molecules such as CH4 represents a promising route to simultaneously explore renewable energy and alleviate global warming. However, the implementation of such a process is hampered by low product yields and poor selectivity. A 2D/2D heterojunction of ultrathin SiC and reduced graphene oxide (RGO) nanosheets was fabricated in situ for efficient and selective photoreduction of CO2 . Ultrathin SiC suppresses significant charge recombination in the bulk phase, thus providing more energetic electrons. The robust 2D/2D heterojunction allows fast transfer of energetic electrons from SiC to RGO. Combining the vital role of RGO in facilitating CO2 activation, the optimized SiC/RGO exhibits an electron-transfer rate of 58.17 µmol h-1 g-1 towards CO2 reduction, 2.7 times that of pure SiC (20.25 µmol h-1 g-1 ). About 92 % of the transferred electrons from SiC are devoted to generating CH4 (6.72 µmol h-1 g-1 ). Such high efficiency and selectivity are mainly a result of the densely accumulated energetic electrons within RGO, which facilitate the eight-electron process to produce CH4 . This work will inspire the design of catalyst/cocatalyst systems for efficient and selective photoreduction of CO2 .