Fortuitous In Vitro Compound Degradation Produces a Tractable Hit against Mycobacterium tuberculosis Dethiobiotin Synthetase: A Cautionary Tale of What Goes In Does Not Always Come Out.

We previously reported potent ligands and inhibitors of Mycobacterium tuberculosis dethiobiotin synthetase (MtDTBS), a promising target for antituberculosis drug development (Schumann et al., ACS Chem Biol. 2021, 16, 2339-2347); here, the unconventional origin of the fragment compound they were derived from is described for the first time. Compound 1 (9b-hydroxy-6b,7,8,9,9a,9b-hexahydrocyclopenta[3,4]cyclobuta[1,2-c]chromen-6(6aH)-one), identified by an in silico fragment screen, was subsequently shown by surface plasmon resonance to have dose-responsive binding (KD = 0.6 mM). Clear electron density was revealed in the DAPA substrate binding pocket when 1 was soaked into MtDTBS crystals, but the density was inconsistent with the structure of 1. Here, we show that the lactone of 1 hydrolyzes to a carboxylic acid (2) under basic conditions, including those of the crystallography soak, with a subsequent ring opening of the component cyclobutane ring forming a cyclopentylacetic acid (3). Crystals soaked directly with authentic 3 produced an electron density that matched that of crystals soaked with presumed 1, confirming the identity of the bound ligand. The synthetic utility of fortuitously formed 3 enabled the subsequent compound development of nanomolar inhibitors. Our findings represent an example of chemical modification within drug discovery assays and demonstrate the value of high-resolution structural data in the fragment hit validation process.

Biochemical and structural characterization of meningococcal methylenetetrahydrofolate reductase.

Methylenetetrahydrofolate reductase (MTHFR) is a key metabolic enzyme in colonization and virulence of Neisseria meningitidis, a causative agent of meningococcal diseases. Here, the biochemical and structural properties of MTHFR from a virulent strain of N. meningitidis serogroup B (NmMTHFR) were characterized. Unlike other orthologs, NmMTHFR functions as a unique homohexamer, composed of three homo-dimerization partners, as shown in our 2.7 Å resolution crystal structure. Six active sites were formed solely within monomers and located away from the oligomerization interfaces. Flavin adenine dinucleotide cofactor formed hydrogen bonds with conserved sidechains, positioning its isoalloxazine ring adjacent to the overlapping binding sites of nicotinamide adenine dinucleotide (NADH) coenzyme and CH2 -H4 folate substrate. NmMTHFR utilized NADH (Km = 44 µM) as an electron donor in the NAD(P)H-CH2 -H4 folate oxidoreductase assay, but not nicotinamide adenine dinucleotide phosphate (NADPH) which is the donor required in human MTHFR. In silico analysis and mutagenesis studies highlighted the significant difference in orientation of helix α7A (Phe215-Thr225) with that in the human enzyme. The extended sidechain of Met221 on helix α7A plays a role in stabilizing the folded structure of NADH in the hydrophobic box. This supports the NADH specificity by restricting the phosphate group of NADPH that causes steric clashes with Glu26. The movement of Met221 sidechain allows the CH2 -H4 folate substrate to bind. The unique topology of its NADH and CH2 -H4 folate binding pockets makes NmMTHFR a promising drug target for the development of new antimicrobial agents that may possess reduced off-target side effects.

Inhibition of Mycobacterium tuberculosis Dethiobiotin Synthase (MtDTBS): Toward Next-Generation Antituberculosis Agents.

Mycobacterium tuberculosis dethiobiotin synthase (MtDTBS) is a crucial enzyme involved in the biosynthesis of biotin in the causative agent of tuberculosis, M. tuberculosis. Here, we report a binder of MtDTBS, cyclopentylacetic acid 2 (KD = 3.4 ± 0.4 mM), identified via in silico screening. X-ray crystallography showed that 2 binds in the 7,8-diaminopelargonic acid (DAPA) pocket of MtDTBS. Appending an acidic group to the para-position of the aromatic ring of the scaffold revealed compounds 4c and 4d as more potent binders, with KD = 19 ± 5 and 17 ± 1 µM, respectively. Further optimization identified tetrazole 7a as a particularly potent binder (KD = 57 ± 5 nM) and inhibitor (Ki = 5 ± 1 µM) of MtDTBS. Our findings highlight the first reported inhibitors of MtDTBS and serve as a platform for the further development of potent inhibitors and novel therapeutics for the treatment of tuberculosis.

A Bimane-Based Peptide Staple for Combined Helical Induction and Fluorescent Imaging.

The thiol-selective fluorescent imaging agent, dibromobimane, has been repurposed to crosslink cysteine- and homocysteine-containing peptides, with the resulting bimane linker acting as both a structural constraint and a fluorescent tag. Macrocyclisation was conducted on nine short peptides containing two cysteines and/or homocysteines, both on-resin and in buffered aqueous solution, to give macrocycles ranging in size from 16 (i,i+2) to 31 (i,i+7) atoms. The structures were defined by CD, NMR structure calculations by using Xplor-NIH, NMR secondary shift and JHαNH analyses to reveal helical structure in the i,i+4 (1, 2), and i,i+3 (5) constrained peptides. Cellular-uptake studies were conducted with three of the macrocycles. Subsequent confocal imaging revealed punctate fluorescence within the cytosol indicative of peptides trapped in endocytic vesicles. These studies demonstrate that dibromobimane is an effective tool for defining secondary structure within short peptides, whilst simultaneously introducing a fluorescent tag suitable for common cell-based experiments.

Biochemical characterisation of class III biotin protein ligases from Botrytis cinerea and Zymoseptoria tritici.

Biotin protein ligase (BPL) is an essential enzyme in all kingdoms of life, making it a potential target for novel anti-infective agents. Whilst bacteria and archaea have simple BPL structures (class I and II), the homologues from certain eukaryotes such as mammals, insects and yeast (class III) have evolved a more complex structure with a large extension on the N-terminus of the protein in addition to the conserved catalytic domain. The absence of atomic resolution structures of any class III BPL hinders structural and functional analysis of these enzymes. Here, two new class III BPLs from agriculturally important moulds Botrytis cinerea and Zymoseptoria tritici were characterised alongside the homologue from the prototypical yeast Saccharomyces cerevisiae. Circular dichroism and ion mobility-mass spectrometry analysis revealed conservation of the overall tertiary and secondary structures of all three BPLs, corresponding with the high sequence similarity. Subtle structural differences were implied by the different thermal stabilities of the enzymes and their varied Michaelis constants for their interactions with ligands biotin, MgATP, and biotin-accepting substrates from different species. The three BPLs displayed different preferences for fungal versus bacterial protein substrates, providing further evidence that class III BPLs have a 'substrate validation' activity for selecting only appropriate proteins for biotinylation. Selective, potent inhibition of these three BPLs was demonstrated despite sequence and structural homology. This highlights the potential for targeting BPL for novel, selective antifungal therapies against B. cinerea, Z. tritici and other fungal species.

Rationally designed peptide-based inhibitor of Aß42 fibril formation and toxicity: a potential therapeutic strategy for Alzheimer's disease.

Amyloid beta peptide (Aß42) aggregation in the brain is thought to be responsible for the onset of Alzheimer's disease, an insidious condition without an effective treatment or cure. Hence, a strategy to prevent aggregation and subsequent toxicity is crucial. Bio-inspired peptide-based molecules are ideal candidates for the inhibition of Aß42 aggregation, and are currently deemed to be a promising option for drug design. In this study, a hexapeptide containing a self-recognition component unique to Aß42 was designed to mimic the ß-strand hydrophobic core region of the Aß peptide. The peptide is comprised exclusively of D-amino acids to enhance specificity towards Aß42, in conjunction with a C-terminal disruption element to block the recruitment of Aß42 monomers on to fibrils. The peptide was rationally designed to exploit the synergy between the recognition and disruption components, and incorporates features such as hydrophobicity, ß-sheet propensity, and charge, that all play a critical role in the aggregation process. Fluorescence assays, native ion-mobility mass spectrometry (IM-MS) and cell viability assays were used to demonstrate that the peptide interacts with Aß42 monomers and oligomers with high specificity, leading to almost complete inhibition of fibril formation, with essentially no cytotoxic effects. These data define the peptide-based inhibitor as a potentially potent anti-amyloid drug candidate for this hitherto incurable disease.

Precipitant-ligand exchange technique reveals the ADP binding mode in Mycobacterium tuberculosis dethiobiotin synthetase.

Dethiobiotin synthetase from Mycobacterium tuberculosis (MtDTBS) is a promising antituberculosis drug target. Small-molecule inhibitors that target MtDTBS provide a route towards new therapeutics for the treatment of antibiotic-resistant tuberculosis. Adenosine diphosphate (ADP) is an inhibitor of MtDTBS; however, structural studies into its mechanism of inhibition have been unsuccessful owing to competitive binding to the enzyme by crystallographic precipitants such as citrate and sulfate. Here, a crystallographic technique termed precipitant-ligand exchange has been developed to exchange protein-bound precipitants with ligands of interest. Proof of concept for the exchange method was demonstrated using cytidine triphosphate (CTP), which adopted the same binding mechanism as that obtained with traditional crystal-soaking techniques. Precipitant-ligand exchange also yielded the previously intractable structure of MtDTBS in complex with ADP solved to 2.4 Šresolution. This result demonstrates the utility of precipitant-ligand exchange, which may be widely applicable to protein crystallography.

Photoswitchable peptide-based 'on-off' biosensor for electrochemical detection and control of protein-protein interactions.

Neuronal nitric oxide synthase (nNOS) is an enzyme responsible for catalyzing the production of the crucial cellular signalling molecule, nitric oxide (NO), through its interaction with the PDZ domain of α-syntrophin protein. In this study, a novel light-driven photoswitchable peptide-based biosensor, modelled on the nNOS ß-finger, is used to detect and control its interaction with α-syntrophin. An azobenzene photoswitch incorporated into the peptide backbone allows reversible switching between a trans photostationary state devoid of secondary structure, and a cis photostationary state possessing a well-defined antiparallel ß-strand geometry, as revealed by molecular modelling. Electrochemical impedance spectroscopy (EIS) is used to successfully detect the interaction between the gold electrode bound peptide in its cis photostationary state and a wide range of concentrations of α-syntrophin protein, highlighting both the qualitative and quantitative properties of the sensor. Furthermore, EIS demonstrates that the probe in its random trans photostationary state does not bind to the target protein. The effectiveness of the biosensor is further endorsed by the high thermal stability of the photostationary state of the cis-isomer, and the ability to actively control biomolecular interactions using light. This approach allows detection and control of binding to yield a regenerable on-off biosensor.

Rational Design of a 310 -Helical PIP-Box Mimetic Targeting PCNA, the Human Sliding Clamp.

The human sliding clamp (PCNA) controls access to DNA for many proteins involved in DNA replication and repair. Proteins are recruited to the PCNA surface by means of a short, conserved peptide motif known as the PCNA-interacting protein box (PIP-box). Inhibitors of these essential protein-protein interactions may be useful as cancer therapeutics by disrupting DNA replication and repair in these highly proliferative cells. PIP-box peptide mimetics have been identified as a potentially rapid route to potent PCNA inhibitors. Here we describe the rational design and synthesis of the first PCNA peptidomimetic ligands, based on the high affinity PIP-box sequence from the natural PCNA inhibitor p21. These mimetics incorporate covalent i,i+4 side-chain/side-chain lactam linkages of different lengths, designed to constrain the peptides into the 310 -helical structure required for PCNA binding. NMR studies confirmed that while the unmodified p21 peptide had little defined structure in solution, mimetic ACR2 pre-organized into 310 -helical structure prior to interaction with PCNA. ACR2 displayed higher affinity binding than most known PIP-box peptides, and retains the native PCNA binding mode, as observed in the co-crystal structure of ACR2 bound to PCNA. This study offers a promising new strategy for PCNA inhibitor design for use as anti-cancer therapeutics.

Mechanisms Governing Precise Protein Biotinylation.

Protein biotinylation is a key post-translational modification found throughout the living world. The covalent attachment of a biotin cofactor onto specific metabolic enzymes is essential for their activity. This modification is distinctive, in that it is carried out by a single enzyme: biotin protein ligase (BPL), an enzyme that is able to biotinylate multiple target substrates without aberrant-off target biotinylation. BPL achieves this target selectivity by recognizing a sequence motif in the context of a highly conserved tertiary structure. One structural class of BPLs has developed an additional 'substrate verification' mechanism to further enable appropriate protein selection. This is crucial for the precise and selective biotinylation required for efficient biotin management, especially in organisms that are auxotrophic for biotin.

Structure of the sliding clamp from the fungal pathogen Aspergillus fumigatus (AfumPCNA) and interactions with Human p21.

The fungal pathogen Aspergillus fumigatus has been implicated in a drastic increase in life-threatening infections over the past decade. However, compared to other microbial pathogens, little is known about the essential molecular processes of this organism. One such fundamental process is DNA replication. The protein responsible for ensuring processive DNA replication is PCNA (proliferating cell nuclear antigen, also known as the sliding clamp), which clamps the replicative polymerase to DNA. Here we present the first crystal structure of a sliding clamp from a pathogenic fungus (A. fumigatus), at 2.6Å. Surprisingly, the structure bears more similarity to the human sliding clamp than other available fungal sliding clamps. Reflecting this, fluorescence polarization experiments demonstrated that AfumPCNA interacts with the PCNA-interacting protein (PIP-box) motif of human p21 with an affinity (Kd ) of 3.1 µm. Molecular dynamics simulations were carried out to better understand how AfumPCNA interacts with human p21. These simulations revealed that the PIP-box bound to AfuPCNA forms a secondary structure similar to that observed in the human complex, with a central 310 helix contacting the hydrophobic surface pocket of AfumPCNA as well as a ß-strand that forms an antiparallel sheet with the AfumPCNA surface. Differences in the 310 helix interaction with PCNA, attributed to residue Thr131 of AfumPCNA, and a less stable ß-strand formation, attributed to residues Gln123 and His125 of AfumPCNA, are likely causes of the over 10-fold lower affinity of the p21 PIP-box for AfumPCNA as compared to hPCNA. DATABASE: The atomic coordinates and structure factors for the Aspergillus fumigatus sliding clamp can be found in the RCSB Protein Data Bank (http://www.rcsb.org) under the accession code 5TUP.

The key position: influence of staple location on constrained peptide conformation and binding.

Constrained α-helical peptides are showing potential as biological probes and therapeutic agents that target protein-protein interactions. However, the factors that determine the optimal constraint locations are still largely unknown. Using the ß-integrin/talin protein interaction as a model system, we examine the effect of constraint location on helical conformation, as well as binding affinity, using circular dichroism and NMR spectroscopy. Stapling increased the overall helical content of each integrin-based peptide tested. However, NMR analysis revealed that different regions within the peptide are stabilised, depending on constraint location, and that these differences correlate with the changes observed in talin binding mode and affinity. In addition, we show that examination of the atomic structure of the parent peptide provides insight into the appropriate placement of helical constraints.

Nucleotide triphosphate promiscuity in Mycobacterium tuberculosis dethiobiotin synthetase.

Dethiobiotin synthetase (DTBS) plays a crucial role in biotin biosynthesis in microorganisms, fungi, and plants. Due to its importance in bacterial pathogenesis, and the absence of a human homologue, DTBS is a promising target for the development of new antibacterials desperately needed to combat antibiotic resistance. Here we report the first X-ray structure of DTBS from Mycobacterium tuberculosis (MtDTBS) bound to a nucleotide triphosphate (CTP). The nucleoside base is stabilized in its pocket through hydrogen-bonding interactions with the protein backbone, rather than amino acid side chains. This resulted in the unexpected finding that MtDTBS could utilise ATP, CTP, GTP, ITP, TTP, or UTP with similar Km and kcat values, although the enzyme had the highest affinity for CTP in competitive binding and surface plasmon resonance assays. This is in contrast to other DTBS homologues that preferentially bind ATP primarily through hydrogen-bonds between the purine base and the carboxamide side chain of a key asparagine. Mutational analysis performed alongside in silico experiments revealed a gate-keeper role for Asn175 in Escherichia coli DTBS that excludes binding of other nucleotide triphosphates. Here we provide evidence to show that MtDTBS has a broad nucleotide specificity due to the absence of the gate-keeper residue.

Structural diversity in integrin/talin interactions.

The adhesion of integrins to the extracellular matrix is regulated by binding of the cytoskeletal protein talin to the cytoplasmic tail of the ß-integrin subunit. Structural studies of this interaction have hitherto largely focused on the ß3-integrin, one member of the large and diverse integrin family. Here, we employ NMR to probe interactions and dynamics, revealing marked structural diversity in the contacts between ß1A, ß1D, and ß3 tails and the Talin1 and Talin2 isoforms. Coupled with analysis of recent structures of talin/ß tail complexes, these studies elucidate the thermodynamic determinants of this heterogeneity and explain why the Talin2/ß1D isoforms, which are co-localized in striated muscle, form an unusually tight interaction. We also show that talin/integrin affinity can be enhanced 1000-fold by deleting two residues in the ß tail. Together, these studies illustrate how the integrin/talin interaction has been fine-tuned to meet varying biological requirements.

The structure of the talin/integrin complex at a lipid bilayer: an NMR and MD simulation study.

Integrins are cell surface receptors crucial for cell migration and adhesion. They are activated by interactions of the talin head domain with the membrane surface and the integrin ß cytoplasmic tail. Here, we use coarse-grained molecular dynamic simulations and nuclear magnetic resonance spectroscopy to elucidate the membrane-binding surfaces of the talin head (F2-F3) domain. In particular, we show that mutations in the four basic residues (K258E, K274E, R276E, and K280E) in the F2 binding surface reduce the affinity of the F2-F3 for the membrane and modify its orientation relative to the bilayer. Our results highlight the key role of anionic lipids in talin/membrane interactions. Simulation of the F2-F3 in complex with the α/ß transmembrane dimer reveals information for its orientation relative to the membrane. Our studies suggest that the perturbed orientation of talin relative to the membrane in the F2 mutant would be expected to in turn perturb talin/integrin interactions.

The structure of an integrin/talin complex reveals the basis of inside-out signal transduction.

Fundamental to cell adhesion and migration, integrins are large heterodimeric membrane proteins that uniquely mediate inside-out signal transduction, whereby adhesion to the extracellular matrix is activated from within the cell by direct binding of talin to the cytoplasmic tail of the beta integrin subunit. Here, we report the first structure of talin bound to an authentic full-length beta integrin tail. Using biophysical and whole cell measurements, we show that a specific ionic interaction between the talin F3 domain and the membrane-proximal helix of the beta tail disrupts an integrin alpha/beta salt bridge that helps maintain the integrin inactive state. Second, we identify a positively charged surface on the talin F2 domain that precisely orients talin to disrupt the heterodimeric integrin transmembrane (TM) complex. These results show key structural features that explain the ability of talin to mediate inside-out TM signalling.

Beta integrin tyrosine phosphorylation is a conserved mechanism for regulating talin-induced integrin activation.

Integrins are large membrane-spanning receptors fundamental to cell adhesion and migration. Integrin adhesiveness for the extracellular matrix is activated by the cytoskeletal protein talin via direct binding of its phosphotyrosine-binding-like F3 domain to the cytoplasmic tail of the beta integrin subunit. The phosphotyrosine-binding domain of the signaling protein Dok1, on the other hand, has an inactivating effect on integrins, a phenomenon that is modulated by integrin tyrosine phosphorylation. Using full-length tyrosine-phosphorylated (15)N-labeled beta3, beta1A, and beta7 integrin tails and an NMR-based protein-protein interaction assay, we show that talin1 binds to the NPXY motif and the membrane-proximal portion of beta3, beta1A, and beta7 tails, and that the affinity of this interaction is decreased by integrin tyrosine phosphorylation. Dok1 only interacts weakly with unphosphorylated tails, but its affinity is greatly increased by integrin tyrosine phosphorylation. The Dok1 interaction remains restricted to the integrin NPXY region, thus phosphorylation inhibits integrin activation by increasing the affinity of beta integrin tails for a talin competitor that does not form activating membrane-proximal interactions with the integrin. Key residues governing these specificities were identified by detailed structural analysis, and talin1 was engineered to bind preferentially to phosphorylated integrins by introducing the mutation D372R. As predicted, this mutation affects talin1 localization in live cells in an integrin phosphorylation-specific manner. Together, these results indicate that tyrosine phosphorylation is a common mechanism for regulating integrin activation, despite subtle differences in how these integrins interact with their binding proteins.

The structure of an interdomain complex that regulates talin activity.

Talin is a large flexible rod-shaped protein that activates the integrin family of cell adhesion molecules and couples them to cytoskeletal actin. It exists in both globular and extended conformations, and an intramolecular interaction between the N-terminal F3 FERM subdomain and the C-terminal part of the talin rod contributes to an autoinhibited form of the molecule. Here, we report the solution structure of the primary F3 binding domain within the C-terminal region of the talin rod and use intermolecular nuclear Overhauser effects to determine the structure of the complex. The rod domain (residues 1655-1822) is an amphipathic five-helix bundle; Tyr-377 of F3 docks into a hydrophobic pocket at one end of the bundle, whereas a basic loop in F3 (residues 316-326) interacts with a cluster of acidic residues in the middle of helix 4. Mutation of Glu-1770 abolishes binding. The rod domain competes with beta3-integrin tails for binding to F3, and the structure of the complex suggests that the rod is also likely to sterically inhibit binding of the FERM domain to the membrane.

Structural basis for the interaction between the cytoplasmic domain of the hyaluronate receptor layilin and the talin F3 subdomain.

Talin is a large cytoskeletal protein that is involved in coupling the integrin family of cell adhesion molecules to the actin cytoskeleton, colocalising with the integrins in focal adhesions (FAs). However, at the leading edge of motile cells, talin colocalises with the hyaluronan receptor layilin in what are thought to be transient adhesions, some of which subsequently mature into more stable FAs. During this maturation process, layilin is replaced with integrins, which are highly clustered in FAs, where localised production of PI(4,5)P(2) by type 1 phosphatidyl inositol phosphate kinase type 1gamma (PIPK1gamma) is thought to play a role in FA assembly. The talin FERM F3 subdomain binds both the integrin beta-subunit cytoplasmic domain and PIPK1gamma, and these interactions are understood in detail at the atomic level. The talin F3 domain also binds to short sequences in the layilin cytoplasmic domain, and here we report the structure of the talin/layilin complex, which shows that talin binds integrins, PIPK1gamma and layilin in similar although subtly different ways. Based on structure comparisons, we designed a set of talin F3 mutations that selectively affected the affinity of talin for its targets, as determined by stopped-flow fluorescence measurements. Such mutations will help to assess the importance of the interactions between talin and its various ligands in cell adhesion and migration.

Transmembrane and cytoplasmic domains in integrin activation and protein-protein interactions (review).

Integrins are heterodimeric membrane-spanning adhesion receptors that are essential for a wide range of biological functions. Control of integrin conformational states is required for bidirectional signalling across the membrane. Key components of this control mechanism are the transmembrane and cytoplasmic domains of the alpha and beta subunits. These domains are believed to interact, holding the integrin in the inactive state, while inside-out integrin activation is accompanied by domain separation. Although there are strong indications for domain interactions, the majority of evidence is insufficient to precisely define the interaction interface. The current best model of the complex, derived from computational calculations with experimental restraints, suggests that integrin activation by the cytoplasmic protein talin is accomplished by steric disruption of the alpha/beta interface. Better atomic-level resolution structures of the alpha/beta transmembrane/cytoplasmic domain complex are still required for the resting state integrin to corroborate this. Integrin activation is also controlled by competitive interactions involving the cytoplasmic domains, particularly the beta-tails. The concept of the beta integrin tail as a focal adhesion interaction 'hub' for interactions and regulation is discussed. Current efforts to define the structure and affinity of the various complexes formed by integrin tails, and how these interactions are controlled, e.g. by phosphorylation and localization, are described.