RESUMEN
17ß-Estradiol (E2) is a novel micro-pollutant that is widely distributed in aquatic sediments and has a universal toxicological effect on aquatic organisms. However, its ecological impact on aquatic microorganisms is not yet clear. In this study, we designed a simulation system for oligotrophic water deposition in the laboratory, analyzed the impact of different concentrations of E2 pollution on the carbon metabolism activity (carbon gas emission rate) of water microorganisms. Based on high-throughput sequencing results, we revealed the impact of E2 pollution on the community structure succession and metabolic function of bacteria, archaea, and methanogens in the simulated system, explored the impact mechanism of E2 pollution on microbial carbon metabolism in water bodies. Our results suggested that E2 significantly impacts the bacterial and archaeal community rather than the methanogen community, thereby indirectly inhibiting methane production. The achievements will bridge the theoretical gap between estrogen metabolism and carbon metabolism in sedimentary environments and contribute to enriching the ecological toxicology theory of steroid estrogen.
RESUMEN
Room-temperature lasing based on low-dimensional GaAs nanowires (NWs) is one of the most critical and challenging issues in realizing near-infrared lasers for nanophotonics. In this article, the random lasing characteristics based on GaAs NW arrays have been discussed theoretically. According to the simulation, GaAs/AlGaAs core-shell NWs with an optimal diameter, density, and Al content in the shell have been grown. Systematic morphological and optical characterizations were carried out. It is found that the GaAs NWs with the additional growth of the AlGaAs shell exhibit improved emission by about 2 orders of magnitude at low temperatures, which can be attributed to the suppression of crystal defects. At room temperature, lasing was observed with a threshold around 70.16 mW/cm2, and the random lasing mechanism was discussed in detail. This work is of great significance for the design of random cavities based on semiconductor NWs, which is important for optoelectronic integration.
RESUMEN
Introduction: Continuous positive airway pressure (CPAP) therapy improves clinical symptoms in patients with obstructive sleep apnea (OSA); however, the mechanism of this clinical improvement and how it may be associated with the restoration of white matter (WM) structures in the brain is unclear. Therefore, this study investigated the relationship between the structural recovery of brain WM and improvements in cognitive function and emotion after long-term (12 months) CPAP treatment in patients with OSA. Methods: We collected data from 17 patients with OSA before and 12 months after CPAP treatment, including sleep monitoring, clinical assessment, and diffusion tensor imaging (DTI) magnetic resonance imaging. Results: We observed a partial reversible recovery of brain WM (mean and radial diffusion coefficients) after treatment. This recovery involved the commissural fibers (cingulum, body of corpus callosum), projection fibers (retrolenticular part of the internal capsule, posterior thalamic radiation, posterior limb of the internal capsule, superior corona radiata, posterior corona radiata), association fibers (external capsule, superior longitudinal fasciculus, inferior longitudinal fasciculus), and other regions. In addition, the improvements in WM fibers in one part of the brain significantly were correlated with the Hamilton Anxiety Scale and Hamilton Depression Scale scores. Discussion: Our results suggest that reversible recovery of reduced brain WM integrity due to OSA may require longer CPAP treatment. Moreover, changes in the integrity of the commissural fibers were associated with emotion regulation. These restored WM areas may explain the cognitive and mood improvements observed after OSA treatment.
RESUMEN
In this paper, we demonstrate the significant impact of the solution flow and electrical field on the homogeneity of large-scale ZnO nanorod electrodeposition from an aqueous solution containing zinc nitrate and ammonium nitrate, primarily based on the X-ray fluorescence results. The homogeneity can be enhanced by adjusting the counter electrode size and solution flow rate. We have successfully produced relatively uniform nanorod arrays on an 8 × 10 cm2 i-ZnO-coated fluorine-doped tin oxide (FTO) substrate using a compact counter electrode and a vertical stirring setup. The as-grown nanorods exhibit similar surface morphologies and dominant, intense, almost uniform near-band-edge emissions in different regions of the sample. Additionally, the surface reflectance is significantly reduced after depositing the ZnO nanorods, achieving a moth-eye effect through subwavelength structuring. This effect of the nanorod array structure indicates that it can improve the utilization efficiency of light reception or emission in various optoelectronic devices and products. The large-scale preparation of ZnO nanorods is more practical to apply and has an extremely broad application value. Based on the research results, it is feasible to prepare large-scale ZnO nanorods suitable for antireflective coatings and commercial applications by optimizing the electrodeposition conditions.
RESUMEN
The rapid evolution of the Internet of Things has engendered increased requirements for low-cost, self-powered UV photodetectors. Herein, high-performance self-driven UV photodetectors are fabricated by designing asymmetric metal-semiconductor-metal structures on the high-quality large-area CsCu2I3 microwire arrays. The asymmetrical depletion region doubles the photocurrent and response speed compared to the symmetric structure device, leading to a high responsivity of 233 mA/W to 355 nm radiation. Notably, at 0 V bias, the asymmetric device produces an open-circuit voltage of 356 mV and drives to a short-circuit current of 372 pA; meanwhile, the switch ratio (Iph/Idark) reaches up to 103, indicating its excellent potential for detecting weak light. Furthermore, the device maintains stable responses throughout 10000 UV-light switch cycles, with negligible degradation even after 90-day storage in air. Our work establishes that CsCu2I3 is a good candidate for self-powered UV detection and thoroughly demonstrates its potential as a passive device.
RESUMEN
The cross-model transferability of adversarial examples makes black-box attacks to be practical. However, it typically requires access to the input of the same modality as black-box models to attain reliable transferability. Unfortunately, the collection of datasets may be difficult in security-critical scenarios. Hence, developing cross-modal attacks for fooling models with different modalities of inputs would highly threaten real-world DNNs applications. The above considerations motivate us to investigate cross-modal transferability of adversarial examples. In particular, we aim to generate video adversarial examples from white-box image models to attack video CNN and ViT models. We introduce the Image To Video (I2V) attack based on the observation that image and video models share similar low-level features. For each video frame, I2V optimizes perturbations by reducing the similarity of intermediate features between benign and adversarial frames on image models. Then I2V combines adversarial frames together to generate video adversarial examples. I2V can be easily extended to simultaneously perturb multi-layer features extracted from an ensemble of image models. To efficiently integrate various features, we introduce an adaptive approach to re-weight the contributions of each layer based on its cosine similarity values of the previous attack step. Experimental results demonstrate the effectiveness of the proposed method.
RESUMEN
GaAs-based oxide-confined vertical-cavity surface-emitting lasers (VCSELs) exhibit relatively low resistance against reliability-related damage. In order to gain a deeper understanding of the degradation and failure mechanism in oxide-confined VCSELs caused by electrostatic discharge (ESD)-induced defect proliferation, we investigated the effects of ESD stress on the degradation of optical-electrical characteristics and the evolution of defects in VCSELs under human body model test condition. The degradation threshold values for forward and reverse ESD pulse amplitudes were estimated to be 200â V and -50â V, respectively. Notably, VCSELs demonstrated greater sensitivity to reverse bias ESD compared to forward bias ESD. Analysis of optical emission and microstructure provided evidence that the device failure is attributed to an increase in ESD current density, leading to the multiplication of dark line defects (DLDs) originating from the edge of the device's oxide aperture. The formation of defects occurred suddenly in discrete events within small regions, rather than progressing gradually and uniformly. These defects propagated and led to damage across the entire active region. We believe that our results would be meaningful for improving the reliability of VCSEL in the future.
RESUMEN
In recent years, mercury chalcogenide colloidal quantum dots (CQDs) have attracted widespread research interest due to their unique electronic structure and optical properties. Mercury chalcogenide CQDs demonstrate an exceptionally broad spectrum and tunable light response across the short-wave to long-wave infrared spectrum. Photodetectors based on mercury chalcogenide CQDs have attracted considerable attention due to their advantages, including solution processability, low manufacturing costs, and excellent compatibility with silicon substrates, which offers significant potential for applications in infrared detection and imaging. However, practical applications of mercury-chalcogenide-CQD-based photodetectors encounter several challenges, including material stability, morphology control, surface modification, and passivation issues. These challenges act as bottlenecks in further advancing the technology. This review article delves into three types of materials, providing detailed insights into the synthesis methods, control of physical properties, and device engineering aspects of mercury-chalcogenide-CQD-based infrared photodetectors. This systematic review aids researchers in gaining a better understanding of the current state of research and provides clear directions for future investigations.
RESUMEN
Microresonator-based high-speed single-mode quantum cascade lasers are ideal candidates for on-chip optical data interconnection and high sensitivity gas sensing in the mid-infrared spectral range. In this paper, we propose a high frequency operation of single-mode doughnut-shaped microcavity quantum cascade laser at â¼4.6â µm. By leveraging compact micro-ring resonators and integrating with grounded coplanar waveguide transmission lines, we have greatly reduced the parasitics originating from both the device and wire bonding. In addition, a selective heat dissipation scheme was introduced to improve the thermal characteristics of the device by semi-insulating InP infill regrowth. The highest continuous wave operating temperature of the device reaches 288â K. A maximum -3â dB bandwidth of 11â GHz and a cut-off frequency exceeding 20â GHz in a microwave rectification technique are obtained. Benefiting from the notch at the short axis of the microcavity resonator, a highly customized far-field profile with an in-plane beam divergence angle of 2.4° is achieved.
RESUMEN
The transferability of adversarial examples across different convolutional neural networks (CNNs) makes it feasible to perform black-box attacks, resulting in security threats for CNNs. However, fewer endeavors have been made to investigate transferable attacks for vision transformers (ViTs), which achieve superior performance on various computer vision tasks. Unlike CNNs, ViTs establish relationships between patches extracted from inputs by the self-attention module. Thus, adversarial examples crafted on CNNs might hardly attack ViTs. To assess the security of ViTs comprehensively, we investigate the transferability across different ViTs in both untargetd and targeted scenarios. More specifically, we propose a Pay No Attention (PNA) attack, which ignores attention gradients during backpropagation to improve the linearity of backpropagation. Additionally, we introduce a PatchOut/CubeOut attack for image/video ViTs. They optimize perturbations within a randomly selected subset of patches/cubes during each iteration, preventing over-fitting to the white-box surrogate ViT model. Furthermore, we maximize the L2 norm of perturbations, ensuring that the generated adversarial examples deviate significantly from the benign ones. These strategies are designed to be harmoniously compatible. Combining them can enhance transferability by jointly considering patch-based inputs and the self-attention of ViTs. Moreover, the proposed combined attack seamlessly integrates with existing transferable attacks, providing an additional boost to transferability. We conduct experiments on ImageNet and Kinetics-400 for image and video ViTs, respectively. Experimental results demonstrate the effectiveness of the proposed method.
RESUMEN
Highly efficient multi-dimensional data storage and extraction are two primary ends for the design and fabrication of emerging optical materials. Although metasurfaces show great potential in information storage due to their modulation for different degrees of freedom of light, a compact and efficient detector for relevant multi-dimensional data retrieval is still a challenge, especially in complex environments. Here, we demonstrate a multi-dimensional image storage and retrieval process by using a dual-color metasurface and a double-layer integrated perovskite single-pixel detector (DIP-SPD). Benefitting from the photoelectric response characteristics of the FAPbBr2.4I0.6 and FAPbI3 films and their stacked structure, our filter-free DIP-SPD can accurately reconstruct different colorful images stored in a metasurface within a single-round measurement, even in complex environments with scattering media or strong background noise. Our work not only provides a compact, filter-free, and noise-robust detector for colorful image extraction in a metasurface, but also paves the way for color imaging application of perovskite-like bandgap tunable materials.
RESUMEN
Infrared detection technology plays an important role in remote sensing, imaging, monitoring, and other fields. So far, most infrared photodetectors are based on InGaAs and HgCdTe materials, which are limited by high fabrication costs, complex production processes, and poor compatibility with silicon-based readout integrated circuits. This hinders the wider application of infrared detection technology. Therefore, reducing the cost of high-performance photodetectors is a research focus. Colloidal quantum dot photodetectors have the advantages of solution processing, low cost, and good compatibility with silicon-based substrates. In this paper, we summarize the recent development of infrared photodetectors based on mainstream lead chalcogenide colloidal quantum dots.
RESUMEN
Different from hexagonal boron nitride (hBN) sheets, the bandgap of hBN nanoribbons (BNNRs) can be changed by spatial/electrostatic confinement. It is predicted that a transverse electric field can narrow the bandgap and even cause an insulator-metal transition in BNNRs. However, experimentally introducing an overhigh electric field across the BNNR remains challenging. Here, it is theoretically and experimentally demonstrated that water adsorption greatly reduces the bandgap of zigzag-oriented BNNRs (zBNNRs). Ab initio calculations show that water molecules can be favorably assembled within the trench between two adjacent BNNRs to form a polar ice layer, which induces a transverse equivalent electric field of over 2 V nm-1 accounting for the bandgap reduction. Field-effect transistors are successfully fabricated from zBNNRs with different widths. The conductance of water-adsorbed zBNNRs can be tuned over 3 orders in magnitude via modulation of the equivalent electrical field at room temperature. Furthermore, photocurrent response measurements are taken to determine the optical bandgaps of zBNNRs with water adsorption. The zBNNR with increased width can exhibit a bandgap down to 1.17 eV. This study offers fundamental insights into new routes toward realizing electronic/optoelectronic devices and circuits based on hexagonal boron nitride.
RESUMEN
A fast photomultiplier photodetector with a broad/narrowband dual mode is implemented using a new 3D heterostructure based on embedded perovskite micro-sized single crystals. Because the single-crystal size is smaller than the electrode size, the active layer can be divided into a perovskite microcrystalline part for charge transport and a polymer-embedded part for charge storage. This induces an additional radial interface in the 3D heterojunction structure, and allows a photogenerated built-in electric field in the radial direction, especially when the energy levels between the perovskite and embedding polymer are similar. This type of heterojunction has a small radial capacitance that can effectively reduce carrier quenching and accelerate the carrier response. By controlling the applied bias direction, up to 300-1000% external quantum efficiency (EQE) and microsecond response can be achieved not only in the wide range of ultraviolet to visible light from 320 to 550 nm, but also in the narrow-band response with a full width at half minimum (FWHM) of 20 nm. This shows great potential for applications in integrated multifunctional photodetectors.
RESUMEN
Black-odorous water is a severe environmental issue that has received continuous attention. The major purpose of the present study was to propose an economical, practical, and pollution-free treatment technology. In this study, the in situ remediation of black-odorous water was conducted by applying different voltages (2.5, 5, and 10 V) to improve oxidation conditions of the surface sediments. The study investigated the effects of voltage intervention on water quality, gas emissions, and microbial community dynamics in surface sediments during the remediation process. The results indicated that the voltage intervention can effectively increase the oxidation-reduction potential (ORP) of the surface sediments and inhibit the emissions of H2S, NH3, and CH4. Moreover, the relative abundances of typical methanogens (Methanosarcina and Methanolobus) and sulfate-reducing bacteria (Desulfovirga) decreased because of the increase in ORP after the voltage treatment. The microbial functions predicted by FAPROTAX also demonstrated the inhibition of methanogenesis and sulfate reduction functions. On the contrary, the total relative abundances of chemoheterotrophic microorganisms (e.g., Dechloromonas, Azospira, Azospirillum, and Pannonibacter) in the surface sediments increased significantly, which led to enhanced biochemical degradability of the black-odorous sediments as well as CO2 emissions.
Asunto(s)
Sedimentos Geológicos , Microbiota , Sedimentos Geológicos/química , Oxidación-Reducción , SulfatosRESUMEN
Eutrophication can stimulate the emissions of volatile sulfur compounds (VSCs) accompanied by variations in environmental variables in lakes. However, the effects of eutrophication on VSC emissions from lake sediments as well as the underlying mechanisms remain unclear. In this study, depth gradient sediments at different eutrophication levels and seasons were collected from Lake Taihu to investigate the response of sulfur biotransformation in the sediments to eutrophication based on the analysis of environmental variables, microbial activity, abundance and community structure. H2S and CS2 were the main VSCs produced from the lake sediments, with the production rates of 2.3-7.9 and 1.2-3.9 ng g-1 h-1 in August, respectively, which were higher than those in March, mainly due to the increasing activity and abundance of sulfate-reducing bacteria (SRB) at high temperatures. The VSC production rates from the sediments increased with lake eutrophication level. Higher VSC production rates were detected in surface sediments in eutrophic regions but in deep sediments in oligotrophic regions. Sulfuricurvum, Thiobacillus and Sulfuricella were the main sulfur-oxidizing bacteria (SOB) in the sediments, while Desulfatiglans and Desulfobacca were the predominant SRB. Organic matter, Fe3+, NO3--N and total sulfur had significant influences on the microbial communities in the sediments. Partial least squares path modelling showed that the trophic level index could stimulate VSC emissions from lake sediments by influencing the activities and abundances of SOB and SRB. These findings indicated that sediments contributed substantially to VSC emissions from eutrophic lakes, especially surface sediments, and sediment dredging might be an effective way to mitigate VSC emissions from eutrophic lakes.
Asunto(s)
Desulfovibrio , Lagos , Lagos/microbiología , Bacterias/metabolismo , Azufre/metabolismo , Compuestos de Azufre/metabolismo , Eutrofización , Sedimentos Geológicos/química , ChinaRESUMEN
The formation of black and odorous water is a complex process influenced by various factors such as organic matter and environmental conditions. However, there are limited studies on the role of microorganisms in water and sediment during the blackening and odorization process. In this study, we investigated the characteristics of black and odorous water formation by simulating organic carbon-driven black and odorous water through indoor experiments. The study revealed that the water turned black and odorous when DOC reached 50 mg/L and the microbial community structure in the water changed significantly during this process, with the relative abundance of Desulfobacterota increasing significantly and Desulfovibrio being the main dominant genus in Desulfobacterota. Additionally, we observed a notable decrease in the α-diversity of the microbial community in water and a considerable increase in microbial function of sulfur compounds respiration in water. In contrast, the sediment microbial community changed slightly, and the main functions of the sediment microbial community remained unchanged. The partial least squares path model (PLS-PM) suggested that organic carbon will drive the blackening and odorization process by affecting DO levels and microbial community structure and that the contribution of Desulfobacterota in water to the formation of black and odorous water was higher than that in sediment. Overall, our study provides insights into the characteristics of black and odorous water formation and suggests potential ways to prevent its formation by controlling DOC and inhibiting the growth of Desulfobacterota in water bodies.
Asunto(s)
Carbono , Agua , Compuestos de Azufre , OdorantesRESUMEN
Sediment microbes are crucial for maintaining biogeochemical cycles in aquatic ecosystems, yet the influence of sediment geophysical structure on microbial communities remains unclear. In this study, we collected sediment cores from a nascent reservoir in its initial stage of deposition and utilized the multifractal model to comprehensively characterize the heterogeneity of sediment grain size and pore space. Our results demonstrate that both environmental physiochemistry and microbial community structures varied significantly with depth, with the grain size distribution (GSD) being the key driver of sediment microbial diversity, as revealed by the partial least squares path model (PLS-PM) method. GSD can potentially impact microbial communities and biomass by controlling pore space and organic matter. Overall, this study represents the first attempt to apply soil multifractal models into the integrated description of physical structure in sediment. Our findings provide valuable insights into the vertical distribution of microbial communities.
Asunto(s)
Lagos , Microbiota , Bacterias , Sedimentos Geológicos , Microbiología del AguaRESUMEN
This is the protocol for a Campbell systematic review. The objectives are as follows. This study has three main objectives: (1) To examine the time duration from title registration to publication of the protocol for a Campbell systematic review and publication of the completed Campbell systematic review; (2) To describe publication times in accordance with the characteristics of the reviews, which include year of publication, type of review, number of authors, number of collaborative institutions, the time gap between the date the search was conducted and review publication, and the length and complexity of the included review (including the number of pages, the number of tables and figures, the number of studies included in the review, the number and type of analyses undertaken, and the number of references); (3) To describe the differences in publication times between Campbell Review Groups.
RESUMEN
Stacked 2D perovskites provide more possibilities for next generation photodetector with more new features. Compared with its excellent optoelectronic properties, the good dielectric performance of metal halide perovskite rarely comes into notice. Here, a bifunctional perovskite based photovoltaic detector capable of two wavelength demultiplexing is demonstrated. In the Black Phosphorus/Perovskite/MoS2 structured photodetector, the comprehensive utilization of the photosensitive and dielectric properties of 2D perovskite allows the device to work in different modes. The device shows normal continuous photoresponse under 405 nm, while it shows a transient spike response to visible light with longer wavelengths. The linear dynamic range, rise/decay time, and self-powered responsivity under 405 nm can reach 100, 38 µs/50 µs, and 17.7 mA W-1 , respectively. It is demonstrated that the transient spike photocurrent with long wavelength exposure is related to the illumination intensity and can coexist with normal photoresponse. Two waveband-dependent signals can be identified and used to reflect more information simultaneously. This work provides a new strategy for multispectral detection and demultiplexing, which can be used to improve data transfer rates and encrypted communications. This work mode can inspire more multispectral photodetectors with different stacked 2D materials, especially to the optoelectronic application of the wide bandgap, high dielectric photosensitive materials.