Promoting effects of bioplastics and sludge anaerobic co-fermentation for carboxylates production with pH regulation: Insights into the plastic structure, microbial metabolic traits, and adaptive mechanism.

Biodegradable plastics (BPs) are presenting new challenges for their reutilization. This work found that volatile fatty acids (VFAs) production by co-fermentation of BPs with waste activated sludge (WAS) reached 4-37 times of the WAS fermentation alone, which was further amplified by pH regulation (especially alkaline regulation). Moreover, the VFAs composition is highly associated with BPs category. By contrast, the traditional plastic showed a limited effect on the VFAs yield and composition. Alkaline regulation enhanced the breakdown of BPs' ester bonds and boosted WAS disintegration, increasing bioavailable substrates. The hydrolytic-acidogenic anaerobes (i.e., Serpentinicella and Proteiniclasticum) and the major metabolic processes participated in the transformation of BPs and WAS to VFAs were upregulated under alkaline conditions. Further exploration unveiled that quorum sensing and peptidoglycan synthesis played important roles in counteracting alkaline stress and maintaining microbial activity for effective VFAs generation. The works demonstrated the effectiveness of pH-regulated anaerobic co-fermentation for BPs valorization.

Solid substrate assisted enhanced laser induced breakdown spectroscopy for metal element analysis in aqueous solution.

Due to plasma quenching caused by the dense water medium, laser-induced breakdown spectroscopy (LIBS) faces challenges such as strong continuous background radiation and weak and broadened characteristic spectral lines when directly detecting metal elements in liquids. In this work, we introduced a simple approach to improve underwater LIBS signals with a solid substrate-assisted method, which requires no sample pre-treatment and simple operation and thus has potential for in situ marine applications. In this method, four submerged solid substrates (Zn, Cu, Ni, and Si) were employed to investigate the breakdown characteristics of underwater LIBS and the mechanism of spectral enhancement by using a CaCl2 solution. The results demonstrated a significant improvement in the detection sensitivity of Ca with these substrates even at a short laser pulse with a relatively low laser energy (10 mJ). Among them, the semiconductor Si substrate exhibited the best enhancement effect, with an enhancement factor of over 75 for the Ca ionic lines at 393.4 nm and 396.8 nm and an enhancement factor of 29 for the Ca atomic line at 422.7 nm, respectively. This is mainly because the presence of substrate decreases the breakdown threshold of the liquid sample, and a higher plasma excitation temperature and electron density are obtained, which, in turn, leads to higher signal intensity. Furthermore, significant plasma emission enhancements for a wide range of elements are also achieved from seawater. These findings can contribute to the development of compact underwater in situ LIBS sensors with low power consumption, while ensuring high detection sensitivity.

Source-sink synergy is the key unlocking sweet potato starch yield potential.

Sweet potato starch is in high demand globally for food and industry. However, starch content is negatively correlated with fresh yield. It is urgent to uncover the genetic basis and molecular mechanisms underlying the starch yield of sweet potato. Here we systematically explore source-sink synergy-mediated sweet potato starch yield formation: the production, loading, and transport of photosynthates in leaves, as well as their unloading and allocation in storage roots, lead to starch content divergence between sweet potato varieties. Moreover, we find that six haplotypes of IbPMA1 encoding a plasma membrane H+-ATPase are significantly linked with starch accumulation. Overexpression of IbPMA1 in sweet potato results in significantly increased starch and sucrose contents, while its knockdown exhibits an opposing effect. Furthermore, a basic helix-loop-helix (bHLH) transcription factor IbbHLH49 directly targets IbPMA1 and activates its transcription. Overexpression of IbbHLH49 notably improves source-sink synergy-mediated fresh yield and starch accumulation in sweet potato. Both IbbHLH49 and IbPMA1 substantially influence sugar transport and starch biosynthesis in source and sink tissues. These findings expand our understanding of starch yield formation and provide strategies and candidate genes for high starch breeding in root and tuber crops.

p-d Orbital Hybridization Induced by Asymmetrical FeSn Dual Atom Sites Promotes the Oxygen Reduction Reaction.

With more flexible active sites and intermetal interaction, dual-atom catalysts (DACs) have emerged as a new frontier in various electrocatalytic reactions. Constructing a typical p-d orbital hybridization between p-block and d-block metal atoms may bring new avenues for manipulating the electronic properties and thus boosting the electrocatalytic activities. Herein, we report a distinctive heteronuclear dual-metal atom catalyst with asymmetrical FeSn dual atom sites embedded on a two-dimensional C2N nanosheet (FeSn-C2N), which displays excellent oxygen reduction reaction (ORR) performance with a half-wave potential of 0.914 V in an alkaline electrolyte. Theoretical calculations further unveil the powerful p-d orbital hybridization between p-block stannum and d-block ferrum in FeSn dual atom sites, which triggers electron delocalization and lowers the energy barrier of *OH protonation, consequently enhancing the ORR activity. In addition, the FeSn-C2N-based Zn-air battery provides a high maximum power density (265.5 mW cm-2) and a high specific capacity (754.6 mA h g-1). Consequently, this work validates the immense potential of p-d orbital hybridization along dual-metal atom catalysts and provides new perception into the logical design of heteronuclear DACs.

Co-encapsulation of curcumin and fucoxanthin in solid-in-oil-in-water multilayer emulsions: Characterization, stability and programmed sequential release.

To enhance the bioavailability of bioactives with varying efficacy in the gastrointestinal tract (GIT), a co-delivery system of solid-in-oil-in-water (S/O/W) emulsion was designed for the co-encapsulation of two bioactives in this paper. S/O/W emulsions were fabricated utilizing fucoxanthin (FUC)-loaded nanoparticles (NPs) as the solid phase, coconut oil containing curcumin (Cur) as the oil phase, and carboxymethyl starch (CMS)/propylene glycol alginate (PGA) complex as the aqueous phase. The high entrapment efficiency of Cur (82.3-91.3%) and FUC (96.0-96.1%) was found in the CMS/PGA complex-stabilized S/O/W emulsions. Encapsulation of Cur and FUC within S/O/W emulsions enhanced their UV and thermal stabilities. In addition, S/O/W emulsions prepared with CMS/PGA complexes displayed good stability. More importantly, the formed S/O/W emulsion possessed programmed sequential release characteristics, delivering Cur and FUC to the small intestine and colon, respectively. These results contributed to designing co-delivery systems for the programmed sequential release of two hydrophobic nutrients in the GIT.

Sulfur-Bridged Asymmetric CuNi Bimetallic Atom Sites for CO2 Reduction with High Efficiency.

Double-atom catalysts (DACs) with asymmetric coordination are crucial for enhancing the benefits of electrochemical carbon dioxide reduction and advancing sustainable development, however, the rational design of DACs is still challenging. Herein, this work synthesizes atomically dispersed catalysts with novel sulfur-bridged Cu-S-Ni sites (named Cu-S-Ni/SNC), utilizing biomass wool keratin as precursor. The plentiful disulfide bonds in wool keratin overcome the limitations of traditional gas-phase S ligand etching process and enable the one-step formation of S-bridged sites. X-ray absorption spectroscopy (XAS) confirms the existence of bimetallic sites with N2Cu-S-NiN2 moiety. In H-cell, Cu-S-Ni/SNC shows high CO Faraday efficiency of 98.1% at -0.65 V versus RHE. Benefiting from the charge tuning effect between the metal site and bridged sulfur atoms, a large current density of 550 mA cm-2 can be achieved at -1.00 V in flow cell. Additionally, in situ XAS, attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS), and density functional theory (DFT) calculations show Cu as the main adsorption site is dual-regulated by Ni and S atoms, which enhances CO2 activation and accelerates the formation of *COOH intermediates. This kind of asymmetric bimetallic atom catalysts may open new pathways for precision preparation and performance regulation of atomic materials toward energy applications.

Parachlorometaxylenol stress caused multidrug-type antibiotic resistance genes proliferation via simultaneously reshaping microbial community and interfering metabolic traits during wastewater treatment process.

Despite biological wastewater treatment processes (e.g., sequencing batch reactors (SBR)) being able to reduce the dissemination of antibiotic resistance genes (ARGs), the variation of ARGs under exogenous pollutant stress is an open question. This work investigated the impacts of para-chloro-meta-xylenol (PCMX, typical antibacterial contaminants) on ARGs spread in long-term SBR operation. Although the SBR process inherently decreased ARGs abundance, the presence of PCMX substantially amplified both the prevalence (mainly multidrug) and abundance of total ARGs (1.17-fold of the control). Further analysis demonstrated that PCMX disintegrated sludge structures as well as increased membrane permeability, facilitating the release of mobile genetic elements and subsequent horizontal transfer of ARGs. In addition, PCMX selectively enriched potential ARG hosts, notably Nitrospira and Candidatus Accumulibacter, which predominantly served as multidrug ARG hosts. Concurrently, the self-adaptive functions of ARGs hosts in the PCMX-exposed SBR system were activated via quorum sensing, two-component regulatory system, ATP-binding cassette transporters, and bacterial secretion system. The upregulation of these metabolic pathways also contributed to the dissemination of ARGs.

Development of a Nomogram Model Based on Lactate-To-Albumin Ratio for Prognostic Prediction in Hospitalized Patients with Intracerebral Hemorrhage.

OBJECTIVE: This study aims to develop a nomogram model incorporating lactate-to-albumin ratio (LAR) to predict the prognosis of hospitalized patients with intracerebral hemorrhage (ICH) and demonstrate its excellent predictive performance. METHODS: A total of 226 patients with ICH from the Medical information mart for intensive care III (MIMIC Ⅲ) database were randomly split into 8:2 ratio training and experimental groups, and 38 patients from the eICU-CRD for external validation. Univariate and multivariate Cox proportional hazards regression analysis was performed to identify independent factors associated with ICH, and multivariate Cox regression was used to construct nomograms for 7-day and 14-day overall survival (OS). The performance of nomogram was verified by the calibration curves, decision curves, and receiver operating characteristic (ROC) curves. RESULTS: Our study identified LAR, glucose, mean blood pressure, sodium, and ethnicity as independent factors influencing in-hospital prognosis. The predictive performance of our nomogram model for predicting 7-day and 14 -day OS (AUCs: 0.845 and 0.830 respectively) are both superior to Oxford Acute Severity of Illness Score, Simplified acute physiology score II, and SIRS (AUCs: 0.617, 0.620 and 0.591 and AUCs: 0.709, 0.715 and 0.640, respectively) in internal validation, and also demonstrate favorable predictive performance in external validation (AUCs: 0.778 and 0.778 respectively). CONCLUSIONS: LAR as a novel biomarker is closely associated with an increased risk of in-hospital mortality of patients with ICH. The nomogram model incorporating LAR along with glucose, mean blood pressure, sodium, and ethnicity demonstrate excellent predictive performance for predicting the prognosis of 7- and 14-day OS of hospitalized patients with ICH.

Lattice Strain and Mott-Schottky Effect of the Charge-Asymmetry Pd1Fe Single-Atom Alloy Catalyst for Semi-Hydrogenation of Alkynes with High Efficiency.

The ideal interface design between the metal and substrate is crucial in determining the overall performance of the alkyne semihydrogenation reaction. Single-atom alloys (SAAs) with isolated dispersed active centers are ideal media for the study of reaction effects. Herein, a charge-asymmetry "armor" SAA (named Pd1Fe SAA@PC), which consists of a Pd1Fe alloy core and a semiconducting P-doped C (PC) shell, is rationally designed as an ideal catalyst for the selective hydrogenation of alkynes with high efficiency. Multiple spectroscopic analyses and density functional theory calculations have demonstrated that Pd1Fe SAA@PC is dual-regulated by lattice tensile and Schottky effects, which govern the selectivity and activity of hydrogenation, respectively. (1) The PC shell layer applied an external traction force causing a 1.2% tensile strain inside the Pd1Fe alloy to increase the reaction selectivity. (2) P doping into the C-shell layer realized a transition from a p-type semiconductor to an n-type semiconductor, thereby forming a unique Schottky junction for advancing alkyne semihydrogenation activity. The dual regulation of lattice strain and the Schottky effect ensures the excellent performance of Pd1Fe SAA@PC in the semihydrogenation reaction of phenylethylene, achieving a conversion rate of 99.9% and a selectivity of 98.9% at 4 min. These well-defined interface modulation strategies offer a practical approach for the rational design and performance optimization of semihydrogenation catalysts.

Sulfur Modified Carbon-Based Single-Atom Catalysts for Electrocatalytic Reactions.

Efficient and sustainable energy development is a powerful tool for addressing the energy and environmental crises. Single-atom catalysts (SACs) have received high attention for their extremely high atom utilization efficiency and excellent catalytic activity, and have broad application prospects in energy development and chemical production. M-N4 is an active center model with clear catalytic activity, but its catalytic properties such as catalytic activity, selectivity, and durability need to be further improved. Adjustment of the coordination environment of the central metal by incorporating heteroatoms (e.g., sulfur) is an effective and feasible modification method. This paper describes the precise synthetic methods for introducing sulfur atoms into M-N4 and controlling whether they are directly coordinated with the central metal to form a specific coordination configuration, the application of sulfur-doped carbon-based single-atom catalysts in electrocatalytic reactions such as ORR, CO2RR, HER, OER, and other electrocatalytic reaction are systematically reviewed. Meanwhile, the effect of the tuning of the electronic structure and ligand configuration parameters of the active center due to doped sulfur atoms with the improvement of catalytic performance is introduced by combining different characterization and testing methods. Finally, several opinions on development of sulfur-doped carbon-based SACs are put forward.

Ovotransferrin Fibril-Gum Arabic Complexes as Stabilizers for Oleogel-in-Water Pickering Emulsions: Formation Mechanism, Physicochemical Properties, and Curcumin Delivery.

This project aimed to explore the influence of the interaction between ovotransferrin fibrils (OTF) and gum arabic (GA) on the formation mechanism, physicochemical properties, and curcumin delivery of the oleogel-in-water Pickering emulsion. Cryo-scanning electron microscopy results showed that OTF-GA complexes effectively adsorbed on the oil-water interface, generating spatial hindrance to inhibit droplet coalescence. The texture analysis also proved that OTF-GA complexes endowed oleogel-in-water Pickering emulsion with preferable springiness (0.49 ± 0.03 mm), chewiness (0.43 ± 0.07 mJ), and adhesion (0.31 ± 0.01 mJ). By exploring the coalescence stability, droplet size, and rheological properties of OTF-GA complexes-stabilized oleogel-in-water Pickering emulsion (OGPE), the higher coagulation stability, larger average droplet size (46.22 ± 0.08 µm), and stronger gel strength were observed. The microrheological results also exhibited stronger attraction between the OGPE droplets, a more pronounced solid-like structure, and a slower speed of movement than OTF-stabilized oleogel-in-water Pickering emulsion (OPE). Meanwhile, OGPE significantly enhanced the extent of lipolysis, stability, and bioaccessibility of curcumin, suggesting that it possessed superior performance as a delivery system for bioactive substances. This project provided adequate theoretical references for protein-polysaccharide complexes-stabilized oleogel-in-water Pickering emulsion, and contributed to expanding the application of oleogel-in-water Pickering emulsion in the food industry.

Modification of hordein by gallic acid in ethanol-free environments: Impact of covalent and non-covalent interactions on structure, physicochemical properties and self-assembly.

The objectives of this study were to modify hordein with gallic acid (GA) in alcohol-free media and to compare the impact of covalent and non-covalent binding on the properties of hordein. Covalent hordein-GA complexes (H-GA) and non-covalent hordein/GA complexes (H/GA) were distinguished by molecular weight, free sulfhydryl groups and free amino groups. Isothermal titration calorimetry (ITC) demonstrated that physical mixing induced non-covalent binding of GA to hordein via hydrogen bonding and hydrophobic interactions, with a lower binding efficiency than covalent ones. Both complexation types led to a structural shift of hordein toward disorder, while grafting of oligomeric GA and alkaline treatment resulted in lower surface hydrophobicity and higher antioxidant activity of H-GA compared to H/GA. The nanoparticles assembled from H-GA had smaller particle sizes and higher physical stability than those formed from H/GA. The results of this study may provide new insights into the modification of hordein by polyphenols.

IbNF-YA1 is a key factor in the storage root development of sweet potato.

As a major worldwide root crop, the mechanism underlying storage root yield formation has always been a hot topic in sweet potato [Ipomoea batatas (L.) Lam.]. Previously, we conducted the transcriptome database of differentially expressed genes between the cultivated sweet potato cultivar "Xushu18," its diploid wild relative Ipomoea triloba without storage root, and their interspecific somatic hybrid XT1 with medium-sized storage root. We selected one of these candidate genes, IbNF-YA1, for subsequent analysis. IbNF-YA1 encodes a nuclear transcription factor Y subunit alpha (NF-YA) gene, which is significantly induced by the natural auxin indole-3-acetic acid (IAA). The storage root yield of the IbNF-YA1 overexpression (OE) plant decreased by 29.15-40.22% compared with the wild type, while that of the RNAi plant increased by 10.16-21.58%. Additionally, IAA content increased significantly in OE plants. Conversely, the content of IAA decreased significantly in RNAi plants. Furthermore, real-time quantitative reverse transcription-PCR (qRT-PCR) analysis demonstrated that the expressions of the key genes IbYUCCA2, IbYUCCA4, and IbYUCCA8 in the IAA biosynthetic pathway were significantly changed in transgenic plants. The results indicated that IbNF-YA1 could directly target IbYUCCA4 and activate IbYUCCA4 transcription. The IAA content of IbYUCCA4 OE plants increased by 71.77-98.31%. Correspondingly, the storage root yield of the IbYUCCA4 OE plant decreased by 77.91-80.52%. These findings indicate that downregulating the IbNF-YA1 gene could improve the storage root yield in sweet potato.

Stability and programmed sequential release of Lactobacillus plantarum and curcumin encapsulated in bilayer-stabilized W1/O/W2 double emulsion: Effect of pectin as protective shell.

In order to overcome the problem that traditional W1/O/W2 double emulsions do not have targeted release performance, thereby better meeting the health needs of consumers, ovalbumin fibrils/pectin-based bilayer-stabilized double emulsion (OP-BDE) co-encapsulated with Lactobacillus plantarum and curcumin was constructed with pectin as the outer protective shell, which was expected to be used in the development of novel functional foods. The effects of pectin coating on the viability of Lactobacillus plantarum under conditions including storage, pasteurization, freeze-thaw cycles and in vitro simulated digestion were investigated. Results showed that pectin as protective shell could significantly enhance the tolerance of Lactobacillus plantarum to various environmental factors. Besides, the adsorption of pectin endowed OP-BDE with higher lipolysis and stronger protective effect on curcumin, remarkably improving the photostability and bioaccessibility of curcumin. In addition, in vitro simulated gastrointestinal release study indicated that OP-BDE possessed programmed sequential release property, allowing curcumin and Lactobacillus plantarum to be released in small intestine and colon, respectively. OP-BDE is the first reported co-delivery emulsion system with programmed release characteristic. This study provides new insights into OP-BDE in constructing co-delivery systems and programmed sequential release of active substances, and has potential reference and application value in actual food production.

Molecular simulation for food protein-ligand interactions: A comprehensive review on principles, current applications, and emerging trends.

In recent years, investigations on molecular interaction mechanisms between food proteins and ligands have attracted much interest. The interaction mechanisms can supply much useful information for many fields in the food industry, including nutrient delivery, food processing, auxiliary detection, and others. Molecular simulation has offered extraordinary insights into the interaction mechanisms. It can reflect binding conformation, interaction forces, binding affinity, key residues, and other information that physicochemical experiments cannot reveal in a fast and detailed manner. The simulation results have proven to be consistent with the results of physicochemical experiments. Molecular simulation holds great potential for future applications in the field of food protein-ligand interactions. This review elaborates on the principles of molecular docking and molecular dynamics simulation. Besides, their applications in food protein-ligand interactions are summarized. Furthermore, challenges, perspectives, and trends in molecular simulation of food protein-ligand interactions are proposed. Based on the results of molecular simulation, the mechanisms of interfacial behavior, enzyme-substrate binding, and structural changes during food processing can be reflected, and strategies for hazardous substance detection and food flavor adjustment can be generated. Moreover, molecular simulation can accelerate food development and reduce animal experiments. However, there are still several challenges to applying molecular simulation to food protein-ligand interaction research. The future trends will be a combination of international cooperation and data sharing, quantum mechanics/molecular mechanics, advanced computational techniques, and machine learning, which contribute to promoting food protein-ligand interaction simulation. Overall, the use of molecular simulation to study food protein-ligand interactions has a promising prospect.

Highly Efficient and Stable ITO-Free Organic Solar Cells Based on Squaraine N-Doped Quaternary Bulk Heterojunction.

Simultaneously achieving high efficiency and robust device stability remains a significant challenge for organic solar cells (OSCs). Solving this challenge is highly dependent on the film morphology of the bulk heterojunction (BHJ) photoactive blends; however, there is a lack of rational control strategy. Herein, it is shown that the molecular crystallinity and nanomorphology of nonfullerene-based BHJ can be effectively controlled by a squaraine-based doping strategy, leading to an increase in device efficiency from 17.26% to 18.5% when doping 2 wt% squaraine into the PBDB-TF:BTP-eC9:PC71 BM ternary BHJ. The efficiency is further improved to 19.11% (certified 19.06%) using an indium-tin-oxide-free column-patterned microcavity (CPM) architecture. Combined with interfacial modification, CPM quaternary OSC excitingly shows an extrapolated lifetime of ≈23 years based on accelerated aging test, with the mechanism behind enhanced stability well studied. Furthermore, a flexible OSC module with a high and stable efficiency of 15.2% and an overall area of 5 cm2 is successfully fabricated, exhibiting a high average output power for wearable electronics. This work demonstrates that OSCs with new design of BHJ and device architecture are highly promising to be practical relevance with excellent performance and stability.

Zein/hyaluronic acid nanoparticle stabilized Pickering emulsion for astaxanthin encapsulation.

Pickering emulsions have attracted considerable attention owing to the stability and functionality. In this study, zein/hyaluronic acid (ZH) nanoparticles were prepared and applied for stabilizing astaxanthin encapsulated Pickering emulsions. By non-covalent interaction between Zein and hyaluronic acid (HA), the conformation of zein changed and therefore improved the wettability of ZH nanoparticles. Unlike the spherical zein nanoparticles, ZH nanoparticles possessed a cross-linked structure with rough surface. Confocal laser scanning microscopy indicated that the nanoparticles accumulated at the oil-water interface. The Pickering emulsion stabilized by ZH nanoparticles exhibited high viscoelasticity and a solid-like behavior, as well as excellent stability during the storage. In vitro digestion results revealed that the presence of HA coating prevented the emulsion from pepsin hydrolysis and achieved efficient delivery of astaxanthin. This work confirmed that Pickering emulsion stabilized by ZH nanoparticles could be used as an effective deliver system for bioactive substances.

An efficient co-delivery system based on multilayer structural nanoparticles for programmed sequential release of resveratrol and vitamin D3 to combat dextran sodium sulfate-induced colitis in mice.

Multilayer structural nanoparticles (MSNPs) fabricated by layer-by-layer self-assembly were used for the co-encapsulation of resveratrol (Res) and vitamin D3 (Vd). Res and Vd co-encapsulated MSNPs (Res-Vd-MSNPs) were evaluated by appearance, morphology, particle size, ζ potential and encapsulation efficiency (EE). The results showed that Res-Vd-MSNPs were spherical in shape with a particle size of 625.4 nm and a surface charge of +26.1 mV. The EE of Res and Vd was as high as 93.6 % and 90.8 %, respectively. Res-Vd-MSNPs exhibited better stability and lower degradation rate in simulated gastric fluid, allowing the programmed sequential release of Vd and Res in simulated intestinal fluid and simulated colonic fluid, which was also confirmed by in vivo fluorescence imaging of mice. In addition, Res-Vd-MSNPs effectively alleviated the clinical symptoms of dextran sulfate sodium salt (DSS)-induced colitis in mice, including weight loss, diarrhea and fecal bleeding, and it especially exerted a preventive effect on DSS-induced colon tissue damage and colon shortening. Furthermore, Res-Vd-MSNPs suppressed the expression of anti-inflammatory cytokines such as TNF-α, IL-1ß and IL-6 and ameliorated DSS-induced oxidative damage, decreased colonic myeloperoxidase (MPO) and nitric oxide (NO) activities and elevated glutathione (GSH) level in DSS-treated mice. This study illustrated that MSNPs were potential carriers for developing the co-delivery system for the synergistic prevention and treatment of ulcerative colitis.

Foam-templated oleogels constructed by whey protein isolate and xanthan gum: Multiple-effect delivery vehicle for Antarctic krill oil.

To address the limitations of Antarctic krill oil (AKO) such as easy oxidation, unacceptable fishy flavor and low bioaccessibility of astaxanthin in it, a multiple-effect delivery vehicle for AKO is needed. In this study, whey protein isolate (WPI) and xanthan gum (XG) were utilized to construct AKO into oleogels by generating foam-templates. The effects of the concentration of XG on the properties of foam, cryogel and the corresponding oleogels were investigated, and the formation mechanism of oleogel was discussed from the perspective of the correlation between foam-cryogel-oleogel. The results demonstrated that with the increase of the concentration of XG, the foam stability was improved, the cryogel after freeze drying had a more uniform network structure and superior oil absorption ability, and the corresponding oleogel had excellent oil holding ability after oil absorption. The AKO oleogels showed superior oxidative stability compared with AKO. The in vitro digestion experiments demonstrated that the bioaccessibility of the astaxanthin in this oleogel was also considerably higher than that in AKO. In addition, this oleogel had masking effect on the odor-presenting substances in AKO, while retaining other flavors of AKO. The foam-templated oleogel can be considered as a multiple-effect vehicle for AKO to facilitate its application in food products. This study provides theoretical basis and data support for the development and utilization of novel vehicle for AKO, broadening the application of AKO in the field of food science.