Innovative Thermocatalytic H2 Sensor with Double-Sided Pd Nanocluster Films on an Ultrathin Mica Substrate.

Hydrogen (H2) is crucial in the future global energy landscape due to its eco-friendly properties, but its flammability requires precise monitoring. This study introduces an innovative thermocatalytic H2 sensor utilizing ultrathin mica sheets as substrates, coated on both sides with Pd nanocluster (NC) films. The ultrathin mica substrate ensures robustness and flexibility, enabling the sensor to withstand high temperatures and mechanical deformation. Additionally, it simplifies the fabrication process by eliminating the need for complex microelectro-mechanical systems (MEMS) technology. Constructed through cluster beam deposition, the sensor exhibits exceptional characteristics, including a wide concentration range (from 500 ppm to 4%), rapid response and recovery times (3.1 and 2.4 s for 1% H2), good selectivity, high stability, and repeatability. The operating temperature can be as low as 40 °C, achieving remarkably low power consumption. The study explores the impact of double-sided versus single-sided catalytic layers, revealing significantly higher sensitivity and response with the double-sided configuration due to the increased catalytic surface area. Additionally, the research investigates the relationship between the deposition amount of Pd NCs and the sensor's sensitivity, identifying an optimal value that maximizes performance without excessive use of Pd. The sensor's innovative design and excellent performance position it as a promising candidate for meeting the demands of a hydrogen-based energy economy.

Development of Pd/In2O3 hybrid nanoclusters to optimize ethanol vapor sensing.

In this study, we successfully synthesize palladium-decorated indium trioxide (Pd/In2O3) hybrid nanoclusters (NCs) using an advanced dual-target cluster beam deposition (CBD) method, a significant stride in developing high-performance ethanol sensors. The prepared Pd/In2O3 hybrid NCs exhibit exceptional sensitivity, stability, and selectivity to low concentrations of ethanol vapor, with a maximum response value of 101.2 at an optimal operating temperature of 260 °C for 6 at% Pd loading. The dynamic response of the Pd/In2O3-based sensor shows an increase in response with increasing ethanol vapor concentrations within the range of 50 to 1000 ppm. The limit of detection is as low as 24 ppb. The sensor exhibits a high sensitivity of 28.24 ppm-1/2, with response and recovery times of 2.7 and 4.4 seconds, respectively, for 100 ppm ethanol vapor. Additionally, the sensor demonstrates excellent repeatability and stability, with only a minor decrease in response observed over 30 days and notable selectivity for ethanol compared to other common volatile organic compounds. The study highlights the potential of Pd/In2O3 NCs as promising materials for ethanol gas sensors, leveraging the unique capabilities of CBD for controlled synthesis and the catalytic properties of Pd for enhanced gas-sensing performance.

Construction of Negative Electrostatic Pore Environments in a Scalable, Stable and Low-Cost Metal-organic Framework for One-Step Ethylene Purification from Ternary Mixtures.

One-step separation of C2 H4 from ternary C2 mixtures by physisorbents remains a challenge to combine excellent separation performance with high stability, low cost, and easy scalability for industrial applications. Herein, we report a strategy of constructing negative electrostatic pore environments in a stable, low-cost, and easily scaled-up aluminum MOF (MOF-303) for efficient one-step C2 H2 /C2 H6 /C2 H4 separation. This material exhibits not only record high C2 H2 and C2 H6 uptakes, but also top-tier C2 H2 /C2 H4 and C2 H6 /C2 H4 selectivities at ambient conditions. Theoretical calculations combined with in situ infrared spectroscopy indicate that multiple N/O sites on pore channels can build a negative electro-environment to provide stronger interactions with C2 H2 and C2 H6 over C2 H4 . Breakthrough experiments confirm its exceptional separation performance for ternary mixtures, affording one of the highest C2 H4 productivity of 1.35 mmol g-1 . This material is highly stable and can be easily synthesized at kilogram-scale from cheap raw materials using a water-based green synthesis. The benchmark combination of excellent separation properties with high stability and low cost in scalable MOF-303 has unlocked its great potential in this challenging industrial separation.

Antibacterial oxygenated ergostane-type steroids produced by the marine sponge-derived fungus Aspergillus sp.

Two oxygenated ergostane-type steroids including one new compound, 3ß-hydroxy-5α,6ß-methoxyergosta-7,22-dien-15-one (1) along with a known analogue ergosta-6,22-dien-3ß,5α,8α-triol (2) were isolated from the crude extracts of the marine sponge-derived fungus Aspergillus sp. Their structures were elucidated on the basis of combined NMR and MS spectroscopic methods. Compound 1 was a marine ergostane-type steroid with two methoxy groups at C-5 and C-6, respectively. These oxygenated ergostane-type steroids were evaluated for their antibacterial activities against human or aquatic pathogens. Among them, compound 1 exhibited antibacterial activity against Staphylococcus aureus.

Programmed fluorine binding engineering in anion-pillared metal-organic framework for record trace acetylene capture from ethylene.

Porous physisorbents are attractive candidates for selective capture of trace gas or volatile compounds due to their low energy footprints. However, many physisorbents suffer from insufficient sorbate-sorbent interactions, resulting in low uptake or inadequate selectivity when gases are present at trace levels. Here, we report a strategy of programmed fluorine binding engineering in anion-pillared metal-organic frameworks to maximize C2H2 binding affinity for benchmark trace C2H2 capture from C2H4. A robust material (ZJU-300a) was elaborately designed to provide multiple-site fluorine binding model, resulting in an ultrastrong C2H2 binding affinity. ZJU-300a exhibits a record-high C2H2 uptake of 3.23 millimoles per gram (at 0.01 bar and 296 kelvin) and one of the highest C2H2/C2H4 selectivity (1672). The adsorption binding of C2H2 and C2H4 was visualized by gas-loaded ZJU-300a structures. The separation capacity was confirmed by breakthrough experiments for 1/99 C2H2/C2H4 mixtures, affording the maximal dynamic selectivity (264) and C2H4 productivity of 436.7 millimoles per gram.

Scalable Green Synthesis of Robust Ultra-Microporous Hofmann Clathrate Material with Record C3 H6 Storage Density for Efficient C3 H6 /C3 H8 Separation.

Developing porous materials for C3 H6 /C3 H8 separation faces the challenge of merging excellent separation performance with high stability and easy scalability of synthesis. Herein, we report a robust Hofmann clathrate material (ZJU-75a), featuring high-density strong binding sites to achieve all the above requirements. ZJU-75a adsorbs large amount of C3 H6 with a record high storage density of 0.818 g mL-1 , and concurrently shows high C3 H6 /C3 H8 selectivity (54.2) at 296 K and 1 bar. Single-crystal structure analysis unveil that the high-density binding sites in ZJU-75a not only provide much stronger interactions with C3 H6 but also enable the dense packing of C3 H6 . Breakthrough experiments on gas mixtures afford both high separation factor of 14.7 and large C3 H6 uptake (2.79 mmol g-1 ). This material is highly stable and can be easily produced at kilogram-scale using a green synthesis method, making it as a benchmark material to address major challenges for industrial C3 H6 /C3 H8 separation.

Construction of Fluorinated Propane-Trap in Metal-Organic Frameworks for Record Polymer-Grade Propylene Production under High Humidity Conditions.

Propane/propene (C3 H8 /C3 H6 ) separation is essential in the petrochemical industry but challenging because of their similar physical and chemical properties. Adsorptive separation with C3 H8 -selective porous materials can energy-efficiently produce high-purity C3 H6 , which is highly promising for replacing conventional cryogenic distillation but suffers from unsatisfactory performance. Herein, through the precise incorporation of fluorinated functional groups into the confined pore space, a new fluorinated metal-organic framework (FDMOF-2) featuring the unique and strong C3 H8 -trap is successfully constructed. FDMOF-2 exhibits an unprecedented C3 H8 capture capacity of 140 cm3 cm-3 and excellent C3 H8 /C3 H6 (1:1, v/v) selectivity up to 2.18 (298 K and 1 bar), thus setting new benchmarks for all reported porous materials. Single-crystal X-ray diffraction studies reveal that the tailored pore confinement in FDMOF-2 provides stronger and multiple attractive interactions with C3 H8 , enabling excellent binding affinities. Breakthrough experiments demonstrate that C3 H8 can be directly extracted from various C3 H8 /C3 H6 mixtures with FDMOF-2, affording an outstanding C3 H6 production (501 mmol L-1 ) with over 99.99% purity. Benefiting from the robust framework and hydrophobic ligands, the separation performance of FDMOF-2 can be well maintained even under 70% relative humidity conditions.

Association between pulmonary hemorrhage and CPAP failure in very preterm infants.

Background: Pulmonary hemorrhage (PH) in neonates is a life-threatening respiratory complication. We aimed to analyze the perinatal risk factors and morbidity with PH among very preterm infants in a large multicenter study. Methods: This was a multicenter case-control study based on a prospective cohort. Participants included 3,680 in-born infants with a gestational age at 24-32 weeks (birth weight <1,500 g) who were admitted between January 1, 2019, and October 31, 2021. All infants were divided into two groups, namely, the PH and no-PH groups, at a ratio of 1:2 according to the following factors: gestational age (GA), birth weight (BW), and the Score for Neonatal Acute Physiology with Perinatal extension II (SNAPPE II). Perinatal factors and outcomes were compared between the two groups by logistic regression analyses. Results: A total of 3,680 infants were included in the study, and the number of identified cases of PH was 262 (7.1%). The incidence was 16.9% (136/806) for neonates with extremely low BW (BW < 1,000 g) infants. The multivariate analysis showed that CPAP failure (OR 2.83, 95% CI 1.57, 5.08) was significantly associated with PH. PH was associated with a high likelihood of death (OR 3.81, 95% CI 2.67, 5.43) and bronchopulmonary dysplasia (BPD) (≥grade II) (OR 1.58, 95% CI 1.00, 2.48). Conclusions: In this multicenter case-control study based on a prospective cohort, PH to be common among VLBW infants. PH is associated with significant morbidity and mortality, and perinatal management, especially CPAP failure. Respiratory management strategies to decrease the risk of PH should be optimized.

Engineering Supramolecular Binding Sites in a Chemically Stable Metal-Organic Framework for Simultaneous High C2 H2 Storage and Separation.

Developing porous materials to overcome the trade-off between adsorption capacity and selectivity for C2 H2 /CO2 separation remains a challenge. Herein, we report a stable HKUST-1-like MOF (ZJU-50a), featuring large cages decorated with high density of supramolecular binding sites to achieve both high C2 H2 storage and selectivity. ZJU-50a exhibits one of the highest C2 H2 storage capacity (192 cm3 g-1 ) and concurrently high C2 H2 /CO2 selectivity (12) at 298 K and 1 bar. Single-crystal X-ray diffraction studies on gas-loaded ZJU-50a crystal unveil that the incorporated supramolecular binding sites can selectively take up C2 H2 molecule but not CO2 to result in both high C2 H2 storage and selectivity. Breakthrough experiments validated its separation performance for C2 H2 /CO2 mixtures, providing a high C2 H2 recovery capacity of 84.2 L kg-1 with 99.5 % purity. This study suggests a novel strategy of engineering supramolecular binding sites into MOFs to overcome the trade-off for this separation.

Metal Nanocluster-Metal Organic Framework-Polymer Hybrid Nanomaterials for Improved Hydrogen Detection.

The development of hydrogen sensors is of paramount importance for timely leak detection and remains a crucial unmet need. Palladium-based materials, well known as hydrogen sensors, still suffer from poisoning and deactivation. Here, a hybrid hydrogen sensor consisting of a Pd nanocluster (NC) film, a metal-organic framework (MOF), and a polymer, are proposed. The polymer coating, as a protection layer, endows the sensor with excellent H2 selectivity and CO-poisoning resistance. The MOF serves as an interface layer between the Pd NC film and the polymer layer, which alters the nature of the interaction with hydrogen and leads to significant sensing performance improvements, owing to the interfacial electronic coupling between Pd NCs and the MOF. The strategy overcomes the shortcomings of retarded response speed and degraded sensitivity induced by the polymer coating of a Pd NC film-polymer hybrid system. This is the first exhibition of a hydrogen-sensing enhancement mechanism achieved by engineering the electronic coupling between Pd and a MOF. The work establishes a deep understanding of the hydrogen-sensing enhancement mechanism at the nanoscale and provides a feasible strategy to engineer next-generation gas-sensing nanodevices with superior sensing figures of merit via hybrid material systems.

Dense Packing of Acetylene in a Stable and Low-Cost Metal-Organic Framework for Efficient C2 H2 /CO2 Separation.

Porous materials for C2 H2 /CO2 separation mostly suffer from high regeneration energy, poor stability, or high cost that largely dampen their industrial implementation. A desired adsorbent should have an optimal balance between excellent separation performance, high stability, and low cost. We herein report a stable, low-cost, and easily scaled-up aluminum MOF (CAU-10-H) for highly efficient C2 H2 /CO2 separation. The suitable pore confinement in CAU-10-H can not only provide multipoint binding interactions with C2 H2 but also enable the dense packing of C2 H2 inside the pores. This material exhibits one of the highest C2 H2 storage densities of 392 g L-1 and highly selective adsorption of C2 H2 over CO2 at ambient conditions, achieved by a low C2 H2 adsorption enthalpy (27 kJ mol-1 ). Breakthrough experiments confirm its exceptional separation performance for C2 H2 /CO2 mixtures, affording both large C2 H2 uptake of 3.3 mmol g-1 and high separation factor of 3.4. CAU-10-H achieves the benchmark balance between separation performance, stability, and cost for C2 H2 /CO2 separation.

Compact Magneto-Fluorescent Colloids by Hierarchical Assembly of Dual-Components in Radial Channels for Sensitive Point-of-Care Immunoassay.

Exploring signal amplification strategies to enhance the sensitivity of lateral flow immunoassay (LFIA) is of great significance for point-of-care (POC) testing of low-concentrated targets in the field of in vitro diagnostics. Here, a highly-sensitive LFIA platform using compact and hierarchical magneto-fluorescent assemblies as both target-enrichment substrates and optical sensing labels is demonstrated. The large-pored dendritic templates are utilized for high-density incorporation of both superparamagnetic iron oxide nanoparticles (IOs) and quantum dots (QDs) within the vertical channels. The hierarchical structure is built via affinity-driven assembly of IOs and QDs from organic phase with silica surface and mercapto-organosilica intermediate layer, respectively. The sequential assembly with central-radial channels enables 3D loading of dual components and separately controlling of discrete functionalities. After the alkyl-organosilica encapsulation and silica sealing, the composite spheres exhibit high stabilities and compatibility with LFIA for procalcitonin (PCT) detection. With the assistance of liquid-phase antigen-capturing, magnetic enrichment, and fluorescence-signal amplification, a limit of detection of 0.031 ng mL-1 for PCT is achieved with a linear range from 0.012 to 10 ng mL-1 . The current LFIA is robust and validated for PCT detection in real serum, which holds great diagnostic significance for precise guidance of antibiotic therapy with POC manner.

Chemically Stable Hafnium-Based Metal-Organic Framework for Highly Efficient C2H6/C2H4 Separation under Humid Conditions.

Realization of ethane-selective porous materials for efficient ethane/ethylene (C2H6/C2H4) separation is an important task in the petrochemical industry. Although a number of C2H6-selective adsorbents have been realized, their adsorption capacity and selectivity might be mostly dampened under humid conditions due to structure decomposition or co-adsorption of water vapor. A desired material should have simultaneously high C2H6 uptake and selectivity, excellent water stability, and ultralow water adsorption uptake for industrial applications, but such a material is elusive. Herein, we report a chemically stable hafnium-based material (Hf)DUT-52a, featuring the suitable pore apertures and less hydrophilicity for highly efficient C2H6/C2H4 separation under humid conditions. Gas sorption results reveal that (Hf)DUT-52a exhibits both high ethane adsorption capacity (4.02 mmol g-1) and C2H6/C2H4 selectivity (1.9) at 296 K and 1 bar, which are comparable to the majority of the top-performing materials. Most importantly, the less pore hydrophilicity enables (Hf)DUT-52a to exhibit a negligible water uptake of 0.036 g g-1 before 40% relative humidity (RH), effectively minimizing the impact of humidity on separation capacity. This material thus shows excellent separation capacity even under 40% RH with a high polymer-grade ethylene production capacity up to 8.43 L kg-1 at ambient conditions, as evidenced by the breakthrough experiments.

Hydrogen Bubble-Directed Tubular Structure: A Novel Mechanism to Facilely Synthesize Nanotube Arrays with Controllable Wall Thickness.

Nanowire arrays can be conveniently fabricated by electrodeposition methods using porous anodized alumina oxide templates. They have found applications in numerous fields. Nanotube arrays, with their hollow structure and much enhanced surface-to-volume ratio, as well as an additional tuning parameter in tube wall thickness, promise additional functions compared with nanowire arrays. Using a similar fabrication method, we have developed a facile and general method to fabricate metallic nanotubes (NTs). Using Ni NTs as a model system, the mechanism of the hydrogen-assisted NT growth was postulated and confirmed by controlling the hydrogen formation with conductive salts in an electrodeposition solution, which improves the H2 concentration but prevents the large H2 bubbles from blocking the nanochannel of a template. The controlled hydrogen generation forces the growth along the wall of nanochannels in the templates, leading to the NT formation. The magnetic properties can be controlled by the NT wall thickness, making these NTs useful for various applications.

Hierarchical Plasmonic-Fluorescent Labels for Highly Sensitive Lateral Flow Immunoassay with Flexible Dual-Modal Switching.

Lateral flow immunoassay (LFIA), as a prominent point-of-care (POC) test platform, has been extensively adopted for rapid, on-site, and facile diagnosis of pathogen infections and disease biomarkers. Exploring novel structured optical labels of LFIA with amplified signal and complementary detection modes favors the sensitive and flexible POC diagnosis. Here, bimodal labels with both colorimetric and fluorescent readout were fabricated via a layered sequential assembly strategy based on affinity templates and hydrophobic metal-containing nanounits. High-quality colorimetric and fluorescent nanoparticles were densely incorporated into the colloidal supports and confined in separated regions, without interfering with each other. The hierarchical integration of gold nanoparticles and quantum dots with high loading density and good optical preservation realized dual readout and amplified signals from the assemblies of individual single nanoparticles. The "all-in-one" optical labels allowed both colorimetric and fluorescent detection of cystatin C (Cys C) after surface conjugation with antibodies. The LFIA strips revealed noninterfering dual signals for both visual inspection and quantitative detection of Cys C via the naked eye and portable devices, respectively. The limits of detection by colorimetric and fluorescent modes were 0.61 and 0.24 ng mL-1, respectively. The novel LFIA platform demonstrated sensitive, specific, and reproducible POC testing of biomarkers with flexible detection modes and was reliable for clinical diagnosis.

A novel expanded metal-organic framework for balancing volumetric and gravimetric methane storage working capacities.

A novel expanded metal-organic framework (UTSA-111a) with functional pyrimidine sites exhibits simultaneously high gravimetric and volumetric methane storage working capacities of 309 cm3 (STP) g-1 and 183 cm3 (STP) cm-3 at 298 K and 5.8-65 bar.

A Chemically Stable Hofmann-Type Metal-Organic Framework with Sandwich-Like Binding Sites for Benchmark Acetylene Capture.

The realization of porous materials for highly selective separation of acetylene (C2 H2 ) from various other gases (e.g., carbon dioxide and ethylene) by adsorption is of prime importance but challenging in the petrochemical industry. Herein, a chemically stable Hofmann-type metal-organic framework (MOF), Co(pyz)[Ni(CN)4 ] (termed as ZJU-74a), that features sandwich-like binding sites for benchmark C2 H2 capture and separation is reported. Gas sorption isotherms reveal that ZJU-74a exhibits by far the record C2 H2 capture capacity (49 cm3 g-1 at 0.01 bar and 296 K) and thus ultrahigh selectivity for C2 H2 /CO2 (36.5), C2 H2 /C2 H4 (24.2), and C2 H2 /CH4 (1312.9) separation at ambient conditions, respectively, of which the C2 H2 /CO2 selectivity is the highest among all the robust MOFs reported so far. Theoretical calculations indicate that the oppositely adjacent nickel(II) centers together with cyanide groups from different layers in ZJU-74a can construct a sandwich-type adsorption site to offer dually strong and cooperative interactions for the C2 H2 molecule, thus leading to its ultrahigh C2 H2 capture capacity and selectivities. The exceptional separation performance of ZJU-74a is confirmed by both simulated and experimental breakthrough curves for 50/50 (v/v) C2 H2 /CO2 , 1/99 C2 H2 /C2 H4 , and 50/50 C2 H2 /CH4 mixtures under ambient conditions.

Selective Ethane/Ethylene Separation in a Robust Microporous Hydrogen-Bonded Organic Framework.

The separation of ethane (C2H6) from ethylene (C2H4) is of prime importance in the production of polymer-grade C2H4 for industrial manufacturing. It is very challenging and still remains unexploited to fully realize efficient C2H6/C2H4 separation in the emerging hydrogen-bonded organic frameworks (HOFs) due to the weak nature of hydrogen bonds. We herein report the benchmark example of a novel ultrarobust HOF adsorbent (termed as HOF-76a) with a Brunauer-Emmett-Teller surface area exceeding 1100 m2 g-1, exhibiting the preferential binding of C2H6 over C2H4 and thus highly selective separation of C2H6/C2H4. Theoretical calculations indicate the key role of the nonpolar surface and the suitable triangular channel-like pores in HOF-76a to sterically "match" better with the nonplanar C2H6 molecule than the planar C2H4, thus affording overall stronger multipoint van der Waals interactions with C2H6. The exceptional separation performance of HOF-76a for C2H6/C2H4 separation was clearly demonstrated by gas adsorption isotherms, ideal adsorbed solution theory calculations, and simulated and experimental breakthrough curves. Breakthrough experiments on HOF-76a reveal that polymer-grade ethylene gas can be straightforwardly produced from 50/50 (v/v) C2H6/C2H4 mixtures during the first adsorption cycle with a high productivity of 7.2 L/kg at 298 K and 1.01 bar and 18.8 L/kg at 298 K and 5.0 bar, respectively.

Simultaneous Enhancement of Near-Infrared Emission and Dye Photodegradation in a Racemic Aspartic Acid Compound via Metal-Ion Modification.

Changing functionalities of materials using simple methods is an active area of research, as it is "green" and lowers the developing cost of new products for the enterprises. A new small molecule racemic N,N-dimethyl aspartic acid has been prepared. Its structure is determined by single-crystal X-ray diffraction. It is characterized by FTIR, XPS, 1H NMR, and mass spectroscopy. Its near-infrared luminescence can be enhanced by the combination of metal ions, including Dy3+, Gd3+, Nd3+, Er3+, Sr3+, Y3+, Zn2+, Zr4+, Ho3+, Yb3+, La3+, Pr6+/Pr3+, and Sm3+ ions. An optical chemistry mechanism upon interaction between the sensitizer and activator is proposed. Furthermore, the association of Ca2+, Sr2+, or Zr4+ ions to the molecule enhanced its photodegradation for dyes under white-light irradiation. Specifically, rhodamine 6G can be degraded by the Ca2+-modified molecule; rhodamine B, rhodamine 6G, and fluorescein sodium salt can be degraded by the Sr2+- or Zr4+-modified molecule. This surprising development opens a way in simultaneously increasing NIR luminescence and the ability of dye photodegradation for the investigated molecule.

Current Status of Microporous Metal-Organic Frameworks for Hydrocarbon Separations.

Separation of hydrocarbon mixtures into single components is a very important industrial process because all represent very important energy resources/raw chemicals in the petrochemical industry. The well-established industrial separation technology highly relies on the energy-intensive cryogenic distillation processes. The discovery of new materials capable of separating hydrocarbon mixtures by adsorbent-based separation technologies has the potential to provide more energy-efficient industrial processes with remarkable energy savings. Porous metal-organic frameworks (MOFs), also known as porous coordination polymers, represent a new class of porous materials that offer tremendous promise for hydrocarbon separations because of their easy tunability, designability, and functionality. A number of MOFs have been designed and synthesized to show excellent separation performance on various hydrocarbon separations. Here, we summarize and highlight some recent significant advances in the development of microporous MOFs for hydrocarbon separation applications.