The phosphorus challenge: biotechnology approaches for a sustainable phosphorus system.

Phosphorus (P) is essential for growing crops, but the supply of high-quality phosphate rock reserves used for fertilizer production is finite while losses of P from the food/waste system cause considerable environmental damage. A variety of emerging approaches in biotechnology are reviewed that hold promise for improving the sustainability of P use in the food/water systems. These include improved sensors, cell culture approaches to meat production, bio-based P adsorption and transformation strategies, advancements in understanding of polyphosphate-accumulating organisms, and new approaches involving biomineralization and anaerobic treatment. By advancing these technologies to scale, progress can be made in developing a circular phosphorus economy that improves food security while protecting drinking water and aquatic ecosystems.

Mini-cores of activated carbon block simulate full-sized performance for removing organics and arsenate from drinking water✰.

Activated carbon block (ACB) filters are widely used in point-of-use (POU) drinking technology to remove tastes, odors, and organic compounds from drinking water, and when modified can even remove inorganic pollutants (e.g., arsenate, lead, copper). To introduce ACB technologies to the POU market, thorough assessment and testing are required to meet the National Sanitary Foundation 53 certification. Testing to gain this certification can be costly and time-consuming and is usually only done on the final product before commercial distribution. We developed and explored how a cylindrical "plug" cored from an ACB can be used in a mini-core apparatus with low water volumes, to mimic full-sized ACB performance. These mini-cores allow the same outside-in radial flow conditions as the full-sized ACB. After addressing potential hydraulic channeling problems, tests with chloroform or arsenate confirmed the ability of the mini-core ACB "plugs" to mimic the performance of full-sized cartridge unit. The benefit of the mini-core ACB "plug" lab-scale approach lays the foundation for testing methodologies that can evaluate a range of pollutants, water chemistries, or material modifications using a small fraction of water compared to full-sized ACB filter. Overall, the development of a mini-core ACB testing apparatus is a key advancement towards sustainable water purification, impacting environmental health, resource conservation, and global access to safe water.

Sorption-based atmospheric water harvesting for continuous water production in the built environment: Assessment of water yield and quality.

Sorption-based atmospheric water harvesting (SAWH) is a promising solution for localized high-quality water production. Application of SAWH indoors offers dual benefits of on-site water generation and humidity control. This study evaluated the use of SAWH for water production in residential or office buildings, employing a portable zeolite-based SAWH device. Over the twelve-month testing period in the arid southwestern USA, the device achieved a median water yield of 3.6 L/day at a cost 30 % less than bottled water sold in the U.S. A mathematical model was developed for predicting water yield under different temperature and relative humidity (RH) conditions. Daily water yields were well fitted with the modified Langmuir model, with absolute humidity serving as the only prediction variable. Water extracted from a well-ventilated office building generally met the drinking water standards set by USEPA. However, elevated levels of dissolved organic carbon (DOC) were detected in the samples collected from the residential house (median = 32.6 mg/L), emphasizing the influence of human activities (e.g., cooking) on the emission of volatile and semi-volatile organic compounds in the air, which consequently reside in harvested water. Aldehydes and volatile fatty acids (formate, acetate) comprised roughly 50 % of the DOC found in the AWE water. A carbon fiber filter was not effective at removing these substances, highlighting the need for further research into effective treatment methods for DOC management before the safe use of AWE water. Overall, this study provides critical insights for the practical application of indoor SAWH as a decentralized source of high-quality water and emphasizes the need to identify and manage DOC for its safe use.

Efficient CO2 Conversion through a Novel Dual-Fiber Reactor System.

Carbon dioxide (CO2) can be converted to valuable organic chemicals using light irradiation and photocatalysis. Today, light-energy loss, poor conversion efficiency, and low quantum efficiency (QE) hamper the application of photocatalytic CO2 reduction. To overcome these drawbacks, we developed an efficient photocatalytic reactor platform for producing formic acid (HCOOH) by coating an iron-based metal-organic framework (Fe-MOF) onto side-emitting polymeric optical fibers (POFs) and using hollow-fiber membranes (HFMs) to deliver bubble-free CO2. The photocatalyst, Fe-MOF with amine-group (-NH2) decoration, provided exceptional dissolved inorganic carbon (DIC) absorption. The dual-fiber system gave a CO2-to-HCOOH conversion rate of 116 ± 1.2 mM h-1 g-1, which is ≥18-fold higher than the rates in photocatalytic slurry systems. The 12% QE obtained using the POF was 18-fold greater than the QE obtained by a photocatalytic slurry. The conversion efficiency and product selectivity of CO2-to-HCOOH were up to 22 and 99%, respectively. Due to the dual efficiencies of bubble-free CO2 delivery and the high QE achieved using the POF platform, the dual-fiber system had energy consumption of only 0.60 ± 0.05 kWh mol-1, 3000-fold better than photocatalysis using slurry-based systems. This innovative dual-fiber design enables efficient CO2 valorization without the use of platinum group metals or rare earth elements.

Effect of electrolyte composition on electrocatalytic transformation of perfluorooctanoic acid (PFOA) in high pH medium.

Recent regulatory actions aim to limit per- and polyfluoroalkyl substances (PFAS) concentrations in drinking water and wastewaters. Regenerable anion exchange resin (AER) is an effective separation process to remove PFAS from water but will require PFAS post-treatment of the regeneration wastestream. Electrocatalytic (EC) processes using chemically boron-doped diamond electrodes, stable in a wide range of chemical compositions show potential to defluorinate PFOA in drinking water and wastewater treatments. Chemical composition and concentration of mineral salts in supporting electrolytes affect AER regeneration efficiency, and play a crucial role in the EC processes. Their impact on PFAS degradation remains understudied. This study investigates the impact of 17 brine electrolytes with different compositions on perfluorooctanoic acid (PFOA) degradation in an alkaline medium and explores the correlation between the rate of PFOA degradation and the solution's conductivity. Results show that higher electrolyte concentrations and conductivity lead to faster PFOA degradation rates. The presence of chloride anions have negligible impact on the degradation rate. However, the presence of nitrate salts reduce PFOA degradation efficiency. Additionally, the use of mixed electrolytes may be a promising approach for reducing the cost of EC operations. PFOA degradation was not influenced by the pH of the bulk solution.

Enhancing the Thermal Mineralization of Perfluorooctanesulfonate on Granular Activated Carbon Using Alkali and Alkaline-Earth Metal Additives.

Thermal treatment has emerged as a promising approach for either the end-of-life treatment or regeneration of granular activated carbon (GAC) contaminated with per- and polyfluoroalkyl substances (PFAS). However, its effectiveness has been limited by the requirement for high temperatures, the generation of products of incomplete destruction, and the necessity to scrub HF in the flue gas. This study investigates the use of common alkali and alkaline-earth metal additives to enhance the mineralization of perfluorooctanesulfonate (PFOS) adsorbed onto GAC. When treated at 800 °C without an additive, only 49% of PFOS was mineralized to HF. All additives tested demonstrated improved mineralization, and Ca(OH)2 had the best performance, achieving a mineralization efficiency of 98% in air or N2. Its ability to increase the reaction rate and shift the byproduct selectivity suggests that its role may be catalytic. Moreover, additives reduced HF in the flue gas by instead reacting with the additive to form inorganic fluorine (e.g., CaF2) in the starting waste material. A hypothesized reaction mechanism is proposed that involves the electron transfer from O2- defect sites of CaO to intermediates formed during the thermal decomposition of PFOS. These findings advocate for the use of additives in the thermal treatment of GAC for disposal or reuse, with the potential to reduce operating costs and mitigate the environmental impact associated with incinerating PFAS-laden wastes.

Water quality constraints H2O2 production in a dual-fiber photocatalytic reactor.

In-situ hydrogen peroxide (H2O2) finds applications in disinfection and oxidation processes. Photoproduction of H2O2 from water and oxygen, avoids reliance upon organic chemicals, and potentially enables smaller-sized or lower-cost reactors than electrochemical methods. In ultrapure water, we previously demonstrated a novel dual-fiber system coupling a light emitting diode (LED) with a metal-organic framework (MOF) catalyst-coated optical fiber (POF-MIL-101(Fe)) and O2-based hollow-membrane fibers and achieved a remarkable H2O2 yield, 308 ± 1.4 mM h-1 catalyst-g-1. To enable H2O2 production anywhere we sought to understand the impacts of common water quality parameters. The production of H2O2 was not affected by added sodium, potassium, hydroxide, sulfate or nitrate ions. There was consistent performance over a wide pH range (4-10), maintaining a high production rate of 232 ± 3.5 mM h-1 catalyst-g-1 even at pH 10, a condition typically unfavorable for H2O2 photoproduction. Chloride ions produced hypochlorous acid, consuming in-situ produced H2O2. Phosphate adsorption on the iron-based MOF catalysts blocked H2O2 production. Inorganic carbon species inhibited H2O2 production due to in-situ formic acid. Encouraging results were obtained using atmospheric water (i.e., condensate), with rates reaching 288 ± 6.1 mM h-1 catalyst-g-1, comparable to ultrapure water. This underscores atmospheric water as a variable alternative, available in nearly all building air conditioning systems or could overcome geographical constraints, particularly in regions where obtaining pure water resources is challenging, offering a cost-effective solution. The dual-fiber reactor using atmospheric water enables high-efficiency H2O2 production anytime and anywhere.

Global-to-Local Dependencies in Phosphorus Mass Flows and Markets: Pathways to Improving System Resiliency in Response to Exogenous Shocks.

Uneven global distribution of phosphate rock deposits and the supply chains to transport phosphorus (P) make P fertilizers vulnerable to exogenous shocks, including commodity market shocks; extreme weather events or natural disasters; and geopolitical instability, such as trade disputes, disruption of shipping routes, and war. Understanding bidirectional risk transmission (global-to-local and local-to-global) in P supply and consumption chains is thus essential. Ignoring P system interdependencies and associated risks could have major impacts on critical infrastructure operations and increase the vulnerability of global food systems. We highlight recent unanticipated events and cascading effects that have impacted P markets globally. We discuss the need to account for exogenous shocks in local assessments of P flows, policies, and infrastructure design choices. We also provide examples of how accounting for undervalued global risks to the P industry can hasten the transition to a sustainable P future. For example, leveraging internal P recycling loops, improving plant P use efficiency, and utilizing legacy soil P all enhance system resiliency in the face of exogenous shocks and long-term anticipated threats. Strategies applied at the local level, which are embedded within national and global policy systems, can have global-scale impacts in derisking the P supply chain.

Optimized bimetallic ratios for durable membrane catalyst-film reactors in treating nitrate-polluted water.

Nitrate contamination of surface and ground water is a significant global challenge. Most current treatment technologies separate nitrate from water, resulting in concentrated wastestreams that need to be managed. Membrane Catalyst-film Reactors (MCfR), which utilize in-situ produced nanocatalysts attached to hydrogen-gas-permeable hollow-fiber membranes, offer a promising alternative for denitrification without generating a concentrated wastestream. In hydrogen-based MCfRs, bimetallic nano-scale catalysts reduce nitrate to nitrite and then further to di-nitrogen or ammonium. This study first investigated how different molar ratios of indium-to-palladium (In:Pd) catalytic films influenced denitrification rates in batch-mode MCfRs. We evaluated eleven In-Pd bimetallic catalyst films, with In:Pd molar ratios from 0.0029 to 0.28. Nitrate-removal exhibited a volcano-shaped dependence on In content, with the highest nitrate removal (0.19 mgNO3--N-min-1 L-1) occurring at 0.045 mol In/mol Pd. Using MCfRs with the optimal In:Pd loading, we treated nitrate-spiked tap water in continuous-flow for >60 days. Nitrate removal and reduction occurred in three stages: substantial denitrification in the first stage, a decline in denitrification efficiency in the second stage, and stabilized denitrification in the third stage. Factors contributing to the slowdown of denitrification were: loss of Pd and In catalysts from the membrane surface and elevated pH due to hydroxide ion production. Sustained nitrate removal will require that these factors be mitigated.

Mechanisms and Strategies of Advanced Oxidation Processes for Membrane Fouling Control in MBRs: Membrane-Foulant Removal versus Mixed-Liquor Improvement.

Membrane bioreactors (MBRs) are well-established and widely utilized technologies with substantial large-scale plants around the world for municipal and industrial wastewater treatment. Despite their widespread adoption, membrane fouling presents a significant impediment to the broader application of MBRs, necessitating ongoing research and development of effective antifouling strategies. As highly promising, efficient, and environmentally friendly chemical methods for water and wastewater treatment, advanced oxidation processes (AOPs) have demonstrated exceptional competence in the degradation of pollutants and inactivation of bacteria in aqueous environments, exhibiting considerable potential in controlling membrane fouling in MBRs through direct membrane foulant removal (MFR) and indirect mixed-liquor improvement (MLI). Recent proliferation of research on AOPs-based antifouling technologies has catalyzed revolutionary advancements in traditional antifouling methods in MBRs, shedding new light on antifouling mechanisms. To keep pace with the rapid evolution of MBRs, there is an urgent need for a comprehensive summary and discussion of the antifouling advances of AOPs in MBRs, particularly with a focus on understanding the realizing pathways of MFR and MLI. In this critical review, we emphasize the superiority and feasibility of implementing AOPs-based antifouling technologies in MBRs. Moreover, we systematically overview antifouling mechanisms and strategies, such as membrane modification and cleaning for MFR, as well as pretreatment and in-situ treatment for MLI, based on specific AOPs including electrochemical oxidation, photocatalysis, Fenton, and ozonation. Furthermore, we provide recommendations for selecting antifouling strategies (MFR or MLI) in MBRs, along with proposed regulatory measures for specific AOPs-based technologies according to the operational conditions and energy consumption of MBRs. Finally, we highlight future research prospects rooted in the existing application challenges of AOPs in MBRs, including low antifouling efficiency, elevated additional costs, production of metal sludge, and potential damage to polymeric membranes. The fundamental insights presented in this review aim to elevate research interest and ignite innovative thinking regarding the design, improvement, and deployment of AOPs-based antifouling approaches in MBRs, thereby advancing the extensive utilization of membrane-separation technology in the field of wastewater treatment.

Protecting against micropollutants in water storage tanks using in-situ TiO2 coated quartz optical fibers.

Photocatalyst-coated optical fibers (P-OFs) using UV-A LEDs offer a highly promising solution for the degradation of micropollutants within municipal, reuse, industrial or home distribution systems, by integrating P-OFs into water storage tanks. P-OFs have photocatalysts attached to bundles of optical fibers, enabling their direct deployment within tanks. This eliminates the necessity for photocatalyst slurries, which would require additional membrane or separation systems. However, a current limitation of P-OFs is light management, specifically light oversaturation of the coated photocatalysts and short light transmission distances along fibers. This study overcomes this limitation and reveals strategies to improve the light dissipation uniformity along P-OFs, and demonstrates the performance of P-OFs on degrading a model micropollutant, carbamazepine (CBZ). Key tunable variables of fibers and light emission conditions, including photocatalyst coating patchiness (p), minimum light incident angles (θm), radiant flux launched to fibers (Φi), and fiber diameters (D), were modeled to establish their relationships with the light dissipation uniformity in TiO2-coated quartz optical fibers (TiO2-QOFs). We then validated modeling insights by conducting experiments to examine how these variables influence the generation of evanescent waves which are localized energy on fiber surfaces, leading to either photocatalyst activation or the recapture of unused light back into fibers. We observed substantial enhancements in evanescent waves generation by decreasing p and increasing θm, resulting in uniform light dissipation which reduces light oversaturation and improves light transmission distances. Moreover, these optimizations led to a remarkable three-fold improvement in CBZ degradation rates and a 65% reduction in energy consumption. Such improvement substantially reduces the capital and operational cost and enhances practicality of energy-efficient photocatalysis without additional chemical oxidants for micropollutant degradation in water storage tanks.

Electrocatalytic water treatment of per- and polyfluoroalkyl substances reduces adsorbable organofluorine and bioaccumulation potential.

Per- and polyfluoroalkyl substances (PFAS) are pervasive in industrial processes, eliciting public concern upon their release into municipal sewers or the environment. Removing PFAS from the environment has become an urgent need. However, because potential endpoints span from energy-intensive complete mineralization to partial PFAS transformation, understanding and developing metrics for evaluating PFAS treatment can be a challenge. The goal of this study was to evaluate and compare the effectiveness of electrocatalytic degradation of PFAS with boron-doped diamond (BDD) electrodes using four techniques: LC-MS/MS target analysis, fluoride ion (F-), adsorbable organofluorine (AOF), and bioaccumulation potential using lipid-bilayer partition (LBP) tests. After 3 hours of electrocatalysis, >99% perfluorooctanoic acid (PFOA) degradation was achieved and corresponded with 84% conversion to F-, which was substantial - though intentionally not complete - defluorination. For the same 3 hour treatment time, AOF and LBP coefficient were reduced by 95% and 83%, respectively. LBP's detection limit was 2 orders of magnitude higher than that of AOF, so the positive correlation observed between LBP and AOF (r = 0.86) suggests AOF's practical utility as a design metric for assessing bioaccumulation potential of various organofluorine transformation by-products.

Ultra-fast green hydrogen production from municipal wastewater by an integrated forward osmosis-alkaline water electrolysis system.

Recent advancements in membrane-assisted seawater electrolysis powered by renewable energy offer a sustainable path to green hydrogen production. However, its large-scale implementation faces challenges due to slow power-to-hydrogen (P2H) conversion rates. Here we report a modular forward osmosis-water splitting (FOWS) system that integrates a thin-film composite FO membrane for water extraction with alkaline water electrolysis (AWE), denoted as FOWSAWE. This system generates high-purity hydrogen directly from wastewater at a rate of 448 Nm3 day-1 m-2 of membrane area, over 14 times faster than the state-of-the-art practice, with specific energy consumption as low as 3.96 kWh Nm-3. The rapid hydrogen production rate results from the utilisation of 1 M potassium hydroxide as a draw solution to extract water from wastewater, and as the electrolyte of AWE to split water and produce hydrogen. The current system enables this through the use of a potassium hydroxide-tolerant and hydrophilic FO membrane. The established water-hydrogen balance model can be applied to design modular FO and AWE units to meet demands at various scales, from households to cities, and from different water sources. The FOWSAWE system is a sustainable and an economical approach for producing hydrogen at a record-high rate directly from wastewater, marking a significant leap in P2H practice.

The Future of Municipal Wastewater Reuse Concentrate Management: Drivers, Challenges, and Opportunities.

Water reuse is rapidly becoming an integral feature of resilient water systems, where municipal wastewater undergoes advanced treatment, typically involving a sequence of ultrafiltration (UF), reverse osmosis (RO), and an advanced oxidation process (AOP). When RO is used, a concentrated waste stream is produced that is elevated in not only total dissolved solids but also metals, nutrients, and micropollutants that have passed through conventional wastewater treatment. Management of this RO concentrate─dubbed municipal wastewater reuse concentrate (MWRC)─will be critical to address, especially as water reuse practices become more widespread. Building on existing brine management practices, this review explores MWRC management options by identifying infrastructural needs and opportunities for multi-beneficial disposal. To safeguard environmental systems from the potential hazards of MWRC, disposal, monitoring, and regulatory techniques are discussed to promote the safety and affordability of implementing MWRC management. Furthermore, opportunities for resource recovery and valorization are differentiated, while economic techniques to revamp cost-benefit analysis for MWRC management are examined. The goal of this critical review is to create a common foundation for researchers, practitioners, and regulators by providing an interdisciplinary set of tools and frameworks to address the impending challenges and emerging opportunities of MWRC management.

Interlaboratory comparison of centrifugal ultrafiltration with ICP-MS detection in a first-step towards methods to screen for nanomaterial release during certification of drinking water contact materials.

A key requirement for evaluating the safety of nano-enabled water treatment devices is measuring concentrations of insoluble nanomaterials released from devices into water that may be ingested by consumers. Therefore, there is a need for simple technique that uses commonly available commercial laboratory techniques to discriminate between nanoparticles and dissolved by-products of the nanomaterial (e.g., ionic metals). Such capabilities would enable screening for particulate or dissolved metals released into water from nanomaterial-containing drinking water contact materials (e.g., paint coatings) or devices (e.g., filters). This multi-laboratory study sought to investigate the use of relatively inexpensive centrifugal ultrafilters to separate nanoparticulate from ionic metal in combination with inductively-coupled plasma mass spectrometry (ICP-MS) detection. The accuracy, precision, and reproducibility for the proposed method were assessed using mixtures of nanoparticulate and ionic gold (Au) in a standard and widely utilized model water matrix (NSF International Standard 53/61). Concentrations for both ionic and nanoparticulate gold based upon measurements of Au mass in the initial solutions and Au permeating the centrifugal ultrafilters. Results across different solution compositions and different participating labs showed that ionic and nanoparticulate Au could be consistently discriminated with ppb concentrations typically resulting in <10 % error. A mass balance was not achieved because nanoparticles were retained on membranes embedded in plastic holders inside the centrifuge tubes, and the entire apparatus could not be acid and/or microwave digested. This was a minor limitation considering the ultrafiltration method is a screening tool, and gold concentration in the permeate indicates the presence of ionic metal rather than nanoforms. With further development, this approach could prove to be an effective tool in screening for nanomaterial release from water-system or device materials as part of third-party certification processes of drinking water compatible products.

Advanced oxidation processes may transform unknown PFAS in groundwater into known products.

Per- and polyfluoroalkyl substances (PFAS) are a group of fluorinated organic contaminants classified as persistent in the aquatic environment. Early studies using targeted analysis approaches to evaluate the degradation of PFAS by advanced oxidation processes (AOP) in real water matrices may have been misinterpreted due to the presence of undetected or unknown PFAS in these matrices. The aims of the present study were to (1) screen selected commercially available AOPs (UV, UV + H2O2, O3/H2O2) and UV photocatalysis in a pilot system using commercially used and novel photocatalysts (TiO2, boron nitride [BN]) for removing PFAS contaminants and (2) evaluate their role on the conversion of non-detected/unknown to known PFAS compounds in real groundwater used as drinking water supplies. Results indicated that, while AOPs have the potential to achieve removal of the EPA method 533 target PFAS compounds (PFDA [100%], PFNA [100%], PFOA [85-94%], PFOS [25-100%], PFHxS [3-100%], PFPeS [100%], PFBS [100%]), AOPs transformed non-detected/unknown longer-chain PFAS compounds to detectable shorter-chain ones under very high-dose AOP operating conditions, leading to an increase in ∑PFAS concentration ranging from 95% to 340%. As emerging PFAS treatment processes transition from lab-scale investigations of target PFAS to pilot testing of real water matrices, studies will need to consider impact of the presence of non-target long-chain PFAS to transform into targeted PFAS compounds. A promising approach to address the potential risks and unforeseen consequences could involve an increased reliance on adsorbable organic fluorine (AOF) analysis before and after advanced oxidation process (AOP) treatment.

The potential of electrodialysis as a cost-effective alternative to reverse osmosis for brackish water desalination.

While electrodialysis (ED) demonstrates lower energy consumption than reverse osmosis (RO) in the desalination of low salinity waters, RO continues to be the predominant technology for brackish water desalination. In this study, we probe this skewed market share and project the potential for future disruption by ED through systematic assessment of the levelized cost of water (LCOW). Using rigorous process- and economic-models, we minimize the LCOW of RO and ED systems, highlighting important tradeoffs between capital and operating expenditure for each technology. With optimized current state-of-the-art systems, we find that ED is more economical than RO for feed salinities ≤ 3 g L-1, albeit to a minor extent. Considering that RO is a highly mature technology, we focus on predicting the future potential of ED by evaluating plausible avenues for capital and operating cost reduction. Specifically, we find that reduction in the price of ion-exchange membranes (i.e., < 60 USD m-2) can ensure competitiveness with RO for feed salinities up to 5 g L-1. For higher feed salinities (≥ 5 g L-1) we reveal that the LCOW of ED may effectively be reduced by decreasing ion-exchange membrane resistance, while preserving high current efficiency. Through extensive assessment of structure-property-performance relationships, we precisely identify target membrane charge densities and diffusion coefficients which optimize the LCOW of ED, thus providing novel guidance for future membrane material development. Overall, we emphasize that with a unified approach - whereby ion-exchange membrane price is reduced and performance is enhanced - ED can become the economically preferable technology compared to RO across the entire brackish water salinity range.

Sous Vide-Inspired Impregnation of Amorphous Titanium (Hydr)Oxide into Carbon Block Point-of-Use Filters for Arsenic Removal from Water.

Carbon block filters, commonly employed as point-of-use (POU) water treatment components, effectively eliminate pathogens and adsorb undesirable tastes, odors, and organic contaminants, all while producing no water waste. However, they lack the capability to remove arsenic. Enabling the carbon block to remove arsenic could reduce its exposure risks in tap water. Inspired by Sous vide cooking techniques, we developed a low-energy, low-chemical method for impregnating commercially available carbon block with titanium (hydr)oxide (THO) in four integrated steps: (1) vacuum removal of air from the carbon block, (2) impregnation with precursors in a flexible pouch, (3) sealing to prevent oxygen intrusion, and (4) heating in a water bath at 80 °C for 20 h to eliminate exposure and reactions with air. This process achieved a uniform 13 wt % Ti loading in the carbon block. Our modified carbon block POU filter efficiently removed both arsenate and arsenite from tap water matrices containing 10 or 100 µg/L arsenic concentrations in batch experiments or continuous flow operations. Surprisingly, the THO-modified carbon block removed arsenite better than arsenate. This innovative method, using 70% fewer chemicals than traditional autoclave techniques, offers a cost-effective solution to reduce exposure to arsenic and lower its overall risk in tap water.

Phenotypic and Transcriptional Responses of Pseudomonas aeruginosa Biofilms to UV-C Irradiation via Side-Emitting Optical Fibers: Implications for Biofouling Control.

Biofilms give rise to a range of issues, spanning from harboring pathogens to accelerating microbial-induced corrosion in pressurized water systems. Introducing germicidal UV-C (200-280 nm) irradiation from light-emitting diodes (LEDs) into flexible side-emitting optical fibers (SEOFs) presents a novel light delivery method to inhibit the accumulation of biofilms on surfaces found in small-diameter tubing or other intricate geometries. This work used surfaces fully submerged in flowing water that contained Pseudomonas aeruginosa, an opportunistic pathogen commonly found in water system biofilms. A SEOF delivered a UV-C gradient to the surface for biofilm inhibition. Biofilm growth over time was monitored in situ using optical conference tomography. Biofilm formation was effectively inhibited when the 275 nm UV-C irradiance was ≥8 µW/cm2. Biofilm samples were collected from several regions on the surface, representing low and high UV-C irradiance. RNA sequencing of these samples revealed that high UV-C irradiance inhibited the expression of functional genes related to energy metabolism, DNA repair, quorum sensing, polysaccharide production, and mobility. However, insufficient sublethal UV-C exposure led to upregulation genes for SOS response and quorum sensing as survival strategies against the UV-C stress. These results underscore the need to maintain minimum UV-C exposure on surfaces to effectively inhibit biofilm formation in water systems.

Per- and polyfluoroalkyl substances and organofluorine in lakes and waterways of the northwestern Great Basin and Sierra Nevada.

Per- and polyfluoroalkyl substances (PFAS) are anthropogenic chemicals that occur ubiquitously in the environment and have been linked to numerous adverse health effects in humans and aquatic organisms. Although numerous environmental monitoring studies have been conducted, only one has evaluated PFAS in surface waters of the northwestern Great Basin, which features unique topography that results in dozens of endorheic basins and terminal lakes with no natural outlet, where PFAS may accumulate. To close this knowledge gap, we evaluated the occurrence of PFAS in grab samples from 15 lakes (headwater and terminal lakes) and 10 rivers in the Great Basin located in Nevada and California of the United States. PFAS and organofluorine were quantified by liquid chromatography tandem mass spectroscopy (LC-MS/MS) and combustion ion chromatography, respectively. The highest concentrations of PFAS occurred in samples taken near sites with known or suspected prior aqueous film forming foam (AFFF) application (~20 to 4754 ng/L). Samples near wastewater treatment plants and in urban areas also tended to have PFAS concentrations greater than those measured in remote, less anthropogenically influenced areas (~2 to 15 ng/L, <3 ng/L respectively). In limited snapshot sampling events PFAS appeared to accumulate in terminal lakes to some extent; in-lake concentrations were two to five times greater than those of their inflows. Fluorotelomer sulfonates were present downstream of a known AFFF application area likely to have had fluorotelomer-based foams applied to it, and the concentrations decayed in a predictable manner, suggesting they may be used as an indicator of PFAS transport away from an AFFF source. In all but two samples, organofluorine concentrations were greater than the sum of targeted PFAS (on a F basis) (median of 0.6 % of organofluorine identified via LC-MS/MS), although there was considerable variability in organofluorine measured in replicate samples.