Polarized illumination coded structured illumination microscopy (picoSIM): experimental results.

The need for acquiring at least three images to reconstruct an optical section of a sample limits the acquisition rate in structured illumination microscopy (SIM) for optical sectioning. In polarized illumination coded structured illumination microscopy (picoSIM) the three individual light patterns are encoded in a single polarized illumination light distribution, enabling the acquisition of the complete SIM data in a single exposure. Here, we describe our experimental set-up and show experimental results acquired with sequential and single-shot picoSIM. This article is part of the Theo Murphy meeting issue 'Super-resolution structured illumination microscopy (part 2)'.

Optical imaging of post-embryonic zebrafish using multi orientation raster scan optoacoustic mesoscopy.

Whole-body optical imaging of post-embryonic stage model organisms is a challenging and long sought-after goal. It requires a combination of high-resolution performance and high-penetration depth. Optoacoustic (photoacoustic) mesoscopy holds great promise, as it penetrates deeper than optical and optoacoustic microscopy while providing high-spatial resolution. However, optoacoustic mesoscopic techniques only offer partial visibility of oriented structures, such as blood vessels, due to a limited angular detection aperture or the use of ultrasound frequencies that yield insufficient resolution. We introduce 360° multi orientation (multi-projection) raster scan optoacoustic mesoscopy (MORSOM) based on detecting an ultra-wide frequency bandwidth (up to 160 MHz) and weighted deconvolution to synthetically enlarge the angular aperture. We report unprecedented isotropic in-plane resolution at the 9-17 µm range and improved signal to noise ratio in phantoms and opaque 21-day-old Zebrafish. We find that MORSOM performance defines a new operational specification for optoacoustic mesoscopy of adult organisms, with possible applications in the developmental biology of adulthood and aging.

Motion artefact detection in structured illumination microscopy for live cell imaging.

The reconstruction process of structured illumination microscopy (SIM) creates substantial artefacts if the specimen has moved during the acquisition. This reduces the applicability of SIM for live cell imaging, because these artefacts cannot always be recognized as such in the final image. A movement is not necessarily visible in the raw data, due to the varying excitation patterns and the photon noise. We present a method to detect motion by extracting and comparing two independent 3D wide-field images out of the standard SIM raw data without needing additional images. Their difference reveals moving objects overlaid with noise, which are distinguished by a probability theory-based analysis. Our algorithm tags motion-artefacts in the final high-resolution image for the first time, preventing the end-user from misinterpreting the data. We show and explain different types of artefacts and demonstrate our algorithm on a living cell.

Corneal birefringence measured by spectrally resolved Mueller matrix ellipsometry and implications for non-invasive glucose monitoring.

A good understanding of the corneal birefringence properties is essential for polarimetric glucose monitoring in the aqueous humor of the eye. Therefore, we have measured complete 16-element Mueller matrices of single-pass transitions through nine porcine corneas in-vitro, spectrally resolved in the range 300…1000 nm. These ellipsometric measurements have been performed at several angles of incidence at the apex and partially at the periphery of the corneas. The Mueller matrices have been decomposed into linear birefringence, circular birefringence (i.e. optical rotation), depolarization, and diattenuation. We found considerable circular birefringence, strongly increasing with decreasing wavelength, for most corneas. Furthermore, the decomposition revealed significant dependence of the linear retardance (in nm) on the wavelength below 500 nm. These findings suggest that uniaxial and biaxial crystals are insufficient models for a general description of the corneal birefringence, especially in the blue and in the UV spectral range. The implications on spectral-polarimetric approaches for glucose monitoring in the eye (for diabetics) are discussed.

Optical Sectioning and High Resolution in Single-Slice Structured Illumination Microscopy by Thick Slice Blind-SIM Reconstruction.

The microscope image of a thick fluorescent sample taken at a given focal plane is plagued by out-of-focus fluorescence and diffraction limited resolution. In this work, we show that a single slice of Structured Illumination Microscopy (two or three beam SIM) data can be processed to provide an image exhibiting tight sectioning and high transverse resolution. Our reconstruction algorithm is adapted from the blind-SIM technique which requires very little knowledge of the illumination patterns. It is thus able to deal with illumination distortions induced by the sample or illumination optics. We named this new algorithm thick slice blind-SIM because it models a three-dimensional sample even though only a single two-dimensional plane of focus was measured.

fastSIM: a practical implementation of fast structured illumination microscopy.

A significant improvement in acquisition speed of structured illumination microscopy (SIM) opens a new field of applications to this already well-established super-resolution method towards 3D scanning real-time imaging of living cells. We demonstrate a method of increased acquisition speed on a two-beam SIM fluorescence microscope with a lateral resolution of ~100 nm at a maximum raw data acquisition rate of 162 frames per second (fps) with a region of interest of 16.5  ×  16.5 µm2, free of mechanically moving components. We use a programmable spatial light modulator (ferroelectric LCOS) which promises precise and rapid control of the excitation pattern in the sample plane. A passive Fourier filter and a segmented azimuthally patterned polarizer are used to perform structured illumination with maximum contrast. Furthermore, the free running mode in a modern sCMOS camera helps to achieve faster data acquisition.

Simple structured illumination microscope setup with high acquisition speed by using a spatial light modulator.

We describe a two-beam interference structured illumination fluorescence microscope. The novelty of the presented system lies in its simplicity. A programmable spatial light modulator (ferroelectric LCoS) in an intermediate image plane enables precise and rapid control of the excitation pattern in the specimen. The contrast of the projected light pattern is strongly influenced by the polarization state of the light entering the high NA objective. To achieve high contrast, we use a segmented polarizer. Furthermore, a mask with six holes blocks unwanted components in the spatial frequency spectrum of the illumination grating. Both these passive components serve their purpose in a simpler and almost as efficient way as active components. We demonstrate a lateral resolution of 114.2 ± 9.5 nm at a frame rate of 7.6 fps per reconstructed 2D slice.

Full-field dual-color 100-nm super-resolution imaging reveals organization and dynamics of mitochondrial and ER networks.

Most structured illumination microscopes use a physical or synthetic grating that is projected into the sample plane to generate a periodic illumination pattern. Albeit simple and cost-effective, this arrangement hampers fast or multi-color acquisition, which is a critical requirement for time-lapse imaging of cellular and sub-cellular dynamics. In this study, we designed and implemented an interferometric approach allowing large-field, fast, dual-color imaging at an isotropic 100-nm resolution based on a sub-diffraction fringe pattern generated by the interference of two colliding evanescent waves. Our all-mirror-based system generates illumination pat-terns of arbitrary orientation and period, limited only by the illumination aperture (NA = 1.45), the response time of a fast, piezo-driven tip-tilt mirror (10 ms) and the available fluorescence signal. At low µW laser powers suitable for long-period observation of life cells and with a camera exposure time of 20 ms, our system permits the acquisition of super-resolved 50 µm by 50 µm images at 3.3 Hz. The possibility it offers for rapidly adjusting the pattern between images is particularly advantageous for experiments that require multi-scale and multi-color information. We demonstrate the performance of our instrument by imaging mitochondrial dynamics in cultured cortical astrocytes. As an illustration of dual-color excitation dual-color detection, we also resolve interaction sites between near-membrane mitochondria and the endoplasmic reticulum. Our TIRF-SIM microscope provides a versatile, compact and cost-effective arrangement for super-resolution imaging, allowing the investigation of co-localization and dynamic interactions between organelles--important questions in both cell biology and neurophysiology.

Non-iterative determination of pattern phase in structured illumination microscopy using auto-correlations in Fourier space.

The artefact-free reconstruction of structured illumination microscopy images requires precise knowledge of the pattern phases in the raw images. If this parameter cannot be controlled precisely enough in an experimental setup, the phases have to be determined a posteriori from the acquired data. While an iterative optimisation based on cross-correlations between individual Fourier images yields accurate results, it is rather time-consuming. Here I present a fast non-iterative technique which determines each pattern phase from an auto-correlation of the respective Fourier image. In addition to improving the speed of the reconstruction, simulations show that this method is also more robust, yielding errors of typically less than λ/500 under realistic signal-to-noise levels.

Superresolution imaging of dynamic MreB filaments in B. subtilis--a multiple-motor-driven transport?

The cytoskeletal protein MreB is an essential component of the bacterial cell-shape generation system. Using a superresolution variant of total internal reflection microscopy with structured illumination, as well as three-dimensional stacks of deconvolved epifluorescence microscopy, we found that inside living Bacillus subtilis cells, MreB forms filamentous structures of variable lengths, typically not longer than 1 µm. These filaments move along their orientation and mainly perpendicular to the long bacterial axis, revealing a maximal velocity at an intermediate length and a decreasing velocity with increasing filament length. Filaments move along straight trajectories but can reverse or alter their direction of propagation. Based on our measurements, we provide a mechanistic model that is consistent with all observations. In this model, MreB filaments mechanically couple several motors that putatively synthesize the cell wall, whereas the filaments' traces mirror the trajectories of the motors. On the basis of our mechanistic model, we developed a mathematical model that can explain the nonlinear velocity length dependence. We deduce that the coupling of cell wall synthesis motors determines the MreB filament transport velocity, and the filament mechanically controls a concerted synthesis of parallel peptidoglycan strands to improve cell wall stability.

Phase optimisation for structured illumination microscopy.

Structured illumination microscopy can achieve super-resolution in fluorescence imaging. The sample is illuminated with periodic light patterns, and a series of images are acquired for different pattern positions, also called phases. From these a super-resolution image can be computed. However, for an artefact-free reconstruction it is important that the pattern phases be known with very high precision. If the necessary precision cannot be guaranteed experimentally, the phase information has to be retrieved a posteriori from the acquired data. We present a fast and robust algorithm that iteratively determines these phases with a precision of typically below λ/100. Our method, which is based on cross-correlations, allows optimisation of pattern phase even when the pattern itself is too fine for detection, in which case most other methods inevitably fail. We analyse the performance of this method using simulated data from a synthetic 2D sample as well as experimental single-slice data from a 3D sample and compare it with another previously published approach.

Line scan--structured illumination microscopy super-resolution imaging in thick fluorescent samples.

Structured illumination microscopy in thick fluorescent samples is a challenging task. The out-of-focus fluorescence background deteriorates the illumination pattern and the reconstructed images suffer from influence of noise. We present a combination of structured illumination microscopy with line scanning. This technique reduces the out-of-focus fluorescence background, which improves the modulation and the quality of the illumination pattern and therefore facilitates the reconstruction. We present super-resolution, optically sectioned images of a thick fluorescent sample, revealing details of the specimen's inner structure.

Characterisation of a resolution enhancing image inversion interferometer.

Image inversion interferometers have the potential to significantly enhance the lateral resolution and light efficiency of scanning fluorescence microscopes. Self-interference of a point source's coherent point spread function with its inverted copy leads to a reduction in the integrated signal for off-axis sources compared to sources on the inversion axis. This can be used to enhance the resolution in a confocal laser scanning microscope. We present a simple image inversion interferometer relying solely on reflections off planar surfaces. Measurements of the detection point spread function for several types of light sources confirm the predicted performance and suggest its usability for scanning confocal fluorescence microscopy.

Simplified approach to diffraction tomography in optical microscopy.

We present a novel microscopy technique to measure the scattered wavefront emitted from an optically transparent microscopic object. The complex amplitude is decoded via phase stepping in a common-path interferometer, enabling high mechanical stability. We demonstrate theoretically and practically that the incoherent summation of multiple illumination directions into a single image increases the resolving power and facilitates image reconstruction in diffraction tomography. We propose a slice-by-slice object-scatter extraction algorithm entirely based in real space in combination with ordinary z-stepping. Thereby the computational complexity affiliated with tomographic methods is significantly reduced. Using the first order Born approximation for weakly scattering objects it is possible to obtain estimates of the scattering density from the exitwaves.

Structured illumination microscopy of a living cell.

Due to diffraction, the resolution of imaging emitted light in a fluorescence microscope is limited to about 200 nm in the lateral direction. Resolution improvement by a factor of two can be achieved using structured illumination, where a fine grating is projected onto the sample, and the final image is reconstructed from a set of images taken at different grating positions. Here we demonstrate that with the help of a spatial light modulator, this technique can be used for imaging slowly moving structures in living cells.

Interferometric resolution improvement for confocal microscopes.

We present a method for increasing the lateral resolution and detection efficiency of scanning fluorescence microscopes by adding an interferometer with partial image inversion to the detection pathway. We show that the resulting detection transfer function is essentially the absolute square of the system's amplitude transfer function enlarged to twice its spatial frequency range. Simulations for a confocal system yield a lateral FWHM resolution of 168 nm (135 nm after image subtraction) as compared to 218 nm for confocal detection without an interferometer. Furthermore we demonstrate how this method is suitable for extended focus imaging. Here simulations for Bessel beam excitation and interferometric detection yield a resolution of 146 nm (116 nm after image subtraction) as compared to 199 nm for integrating detection without an interferometer.