RESUMEN
Thousands of artificial ('human-made') structures are present in the marine environment, many at or approaching end-of-life and requiring urgent decisions regarding their decommissioning. No consensus has been reached on which decommissioning option(s) result in optimal environmental and societal outcomes, in part, owing to a paucity of evidence from real-world decommissioning case studies. To address this significant challenge, we asked a worldwide panel of scientists to provide their expert opinion. They were asked to identify and characterise the ecosystem effects of artificial structures in the sea, their causes and consequences, and to identify which, if any, should be retained following decommissioning. Experts considered that most of the pressures driving ecological and societal effects from marine artificial structures (MAS) were of medium severity, occur frequently, and are dependent on spatial scale with local-scale effects of greater magnitude than regional effects. The duration of many effects following decommissioning were considered to be relatively short, in the order of days. Overall, environmental effects of structures were considered marginally undesirable, while societal effects marginally desirable. Experts therefore indicated that any decision to leave MAS in place at end-of-life to be more beneficial to society than the natural environment. However, some individual environmental effects were considered desirable and worthy of retention, especially in certain geographic locations, where structures can support improved trophic linkages, increases in tourism, habitat provision, and population size, and provide stability in population dynamics. The expert analysis consensus that the effects of MAS are both negative and positive for the environment and society, gives no strong support for policy change whether removal or retention is favoured until further empirical evidence is available to justify change to the status quo. The combination of desirable and undesirable effects associated with MAS present a significant challenge for policy- and decision-makers in their justification to implement decommissioning options. Decisions may need to be decided on a case-by-case basis accounting for the trade-off in costs and benefits at a local level.
Asunto(s)
Ecosistema , Yacimiento de Petróleo y Gas , Humanos , Consenso , Ambiente , ClimaRESUMEN
Switching from fossil fuels to renewable energy is key to international energy transition efforts and the move toward net zero. For many nations, this requires decommissioning of hundreds of oil and gas infrastructure in the marine environment. Current international, regional and national legislation largely dictates that structures must be completely removed at end-of-life although, increasingly, alternative decommissioning options are being promoted and implemented. Yet, a paucity of real-world case studies describing the impacts of decommissioning on the environment make decision-making with respect to which option(s) might be optimal for meeting international and regional strategic environmental targets challenging. To address this gap, we draw together international expertise and judgment from marine environmental scientists on marine artificial structures as an alternative source of evidence that explores how different decommissioning options might ameliorate pressures that drive environmental status toward (or away) from environmental objectives. Synthesis reveals that for 37 United Nations and Oslo-Paris Commissions (OSPAR) global and regional environmental targets, experts consider repurposing or abandoning individual structures, or abandoning multiple structures across a region, as the options that would most strongly contribute toward targets. This collective view suggests complete removal may not be best for the environment or society. However, different decommissioning options act in different ways and make variable contributions toward environmental targets, such that policy makers and managers would likely need to prioritise some targets over others considering political, social, economic, and ecological contexts. Current policy may not result in optimal outcomes for the environment or society.
Asunto(s)
Monitoreo del Ambiente , Yacimiento de Petróleo y Gas , Energía Renovable , Combustibles FósilesRESUMEN
Man's impacts on global ecosystems are increasing and there is a growing demand that these activities be appropriately monitored. Monitoring requires measurement of a response metric ('signal') that changes maximally and consistently in response to the monitored activity irrespective of other factors ('noise'), thus maximising the signal-to-noise ratio. Indices derived from time-consuming morphology-based taxonomic identification of organisms are a core part of many monitoring programmes. Metabarcoding is an alternative to morphology-based identification and involves the sequencing of short fragments of DNA ('markers') from multiple taxa simultaneously. DNA suitable for metabarcoding includes that extracted from environmental samples (eDNA). Metabarcoding outputs DNA sequences that can be identified (annotated) by matching them against archived annotated sequences. However, sequences from most organisms are not archived - preventing annotation and potentially limiting metabarcoding in monitoring applications. Consequently, there is growing interest in using unannotated sequences as response metrics in monitoring programmes. We compared the sequences from three commonly used markers (16S (V3/V4 regions), 18S (V1/V2 regions) and COI) and, sampling along steep impact gradients, showed that the 16S and COI sequences were associated with the largest and smallest signal-to-noise ratio respectively. We trialled four separate, intuitive, noise-reduction approaches and demonstrated that removing less frequent sequences improved the signal-to-noise ratio, partitioning an additional 25 % from noise to explanatory factors in non-parametric ANOVA (NPA) and reducing dispersion in the data. For the 16S marker, retaining only the most frequently observed sequence, per sample, resulting in nine sequences across 150 samples, generated a near-maximal signal-to-noise ratio (95 % of the variance explained in NPA). We recommend that NPA, combined with rigorous elimination of less frequent sequences, be used to pre-filter sequences/taxa being used in monitoring applications. Our approach will simplify downstream analysis, for example the identification of key taxa and functional associations.
Asunto(s)
ADN Ambiental , Humanos , Código de Barras del ADN Taxonómico , Ecosistema , Relación Señal-Ruido , Monitoreo del Ambiente/métodos , ADN/genética , BiodiversidadRESUMEN
To avoid loss of genetic information in environmental DNA (eDNA) field samples, the preservation of nucleic acids during field sampling is a critical step. In the development of standard operating procedures (SOPs) for eDNA-based compliance monitoring, the effect of different routinely used sediment preservations on biological community structures serving as bioindicators has gone untested. We compared eDNA metabarcoding results of marine bacterial communities from sample aliquots that were treated with a nucleic acid preservation solution (treated samples) and aliquots that were frozen without further treatment (non-treated samples). Sediment samples were obtained from coastal locations subjected to different stressors (aquaculture, urbanization, industry). DNA extraction efficiency, bacterial community profiles, and measures of alpha- and beta-diversity were highly congruent between treated and non-treated samples. As both preservation methods provide the same relevant information to environmental managers and regulators, we recommend the inclusion of both methods into SOPs for biomonitoring in marine coastal environments.
Asunto(s)
Monitoreo Biológico , Ecosistema , Biodiversidad , Código de Barras del ADN Taxonómico , Monitoreo del Ambiente , GenómicaRESUMEN
Mussels belonging to the Mytilus species complex (M. edulis, ME; M. galloprovincialis, MG; and M. trossulus, MT) often occur in sympatry, facilitating introgressive hybridization. This may be further promoted by mussel aquaculture practices, with MT introgression often resulting in commercially unfavourable traits such as low meat yield and weak shells. To investigate the relationship between genotype and shell phenotype, genetic and morphological variability was quantified across depth (1 m to 7 m) along a cultivation rope at a mussel farm on the West coast of Scotland. A single nuclear marker (Me15/16) and a novel panel of 33 MT-diagnostic single nucleotide polymorphisms were used to evaluate stock structure and the extent of MT introgression across depth. Variation in shell strength, determined as the maximum compression force for shell puncture, and shell shape using geometric morphometric analysis were evaluated in relation to cultivation depth and the genetic profiles of the mussels. Overall, ME was the dominant genotype across depth, followed by ME × MG hybrids and smaller quantities of ME × MT hybrids and pure MT individuals. In parallel, we identified multiple individuals that were either predominantly homozygous or heterozygous for MT-diagnostic alleles, likely representing pure MT and first-generation ME × MT hybrids, respectively. Both the proportion of individuals carrying MT alleles and MT allele frequency declined with depth. Furthermore, MT-introgressed individuals had significantly weaker and more elongate shells than nonintrogressed individuals. This study provides detailed insights into stock structure along a cultivation rope and suggests that practical methods to assess shell strength and shape of cultivated mussels may facilitate the rapid identification of MT, limiting the impact of this commercially damaging species.
RESUMEN
The analysis of benthic bacterial community structure has emerged as a powerful alternative to traditional microscopy-based taxonomic approaches to monitor aquaculture disturbance in coastal environments. However, local bacterial diversity and community composition vary with season, biogeographic region, hydrology, sediment texture, and aquafarm-specific parameters. Therefore, without an understanding of the inherent variation contained within community complexes, bacterial diversity surveys conducted at individual farms, countries, or specific seasons may not be able to infer global universal pictures of bacterial community diversity and composition at different degrees of aquaculture disturbance. We have analyzed environmental DNA (eDNA) metabarcodes (V3-V4 region of the hypervariable SSU rRNA gene) of 138 samples of different farms located in different major salmon-producing countries. For these samples, we identified universal bacterial core taxa that indicate high, moderate, and low aquaculture impact, regardless of sampling season, sampled country, seafloor substrate type, or local farming and environmental conditions. We also discuss bacterial taxon groups that are specific for individual local conditions. We then link the metabolic properties of the identified bacterial taxon groups to benthic processes, which provides a better understanding of universal benthic ecosystem function(ing) of coastal aquaculture sites. Our results may further guide the continuing development of a practical and generic bacterial eDNA-based environmental monitoring approach.
RESUMEN
Environmental DNA metabarcoding is a powerful approach for use in biomonitoring and impact assessments. Amplicon-based eDNA sequence data are characteristically highly divergent in sequencing depth (total reads per sample) as influenced inter alia by the number of samples simultaneously analyzed per sequencing run. The random forest (RF) machine learning algorithm has been successfully employed to accurately classify unknown samples into monitoring categories. To employ RF to eDNA data, and avoid sequencing-depth artifacts, sequence data across samples are normalized using rarefaction, a process that inherently loses information. The aim of this study was to inform future sampling designs in terms of the relationship between sampling depth and RF accuracy. We analyzed three published and one new bacterial amplicon datasets, using a RF, based initially on the maximal rarefied data available (minimum mean ofâ¯>â¯30,000 reads across all datasets) to give our baseline performance. We then evaluated the RF classification success based on increasingly rarefied datasets. We found that extreme to moderate rarefaction (50-5000 sequences per sample) was sufficient to achieve prediction performance commensurate to the full data, depending on the classification task. We did not find that the number of classification classes, data balance across classes, or the total number of sequences or samples, were associated with predictive accuracy. We identified the ability of the training data to adequately characterize the classes being mapped as the most important criterion and discuss how this finding can inform future sampling design for eDNA based biomonitoring to reduce costs and computation time.
RESUMEN
Increasing anthropogenic impact and global change effects on natural ecosystems has prompted the development of less expensive and more efficient bioassessments methodologies. One promising approach is the integration of DNA metabarcoding in environmental monitoring. A critical step in this process is the inference of ecological quality (EQ) status from identified molecular bioindicator signatures that mirror environmental classification based on standard macroinvertebrate surveys. The most promising approaches to infer EQ from biotic indices (BI) are supervised machine learning (SML) and the calculation of indicator values (IndVal). In this study we compared the performance of both approaches using DNA metabarcodes of bacteria and ciliates as bioindicators obtained from 152 samples collected from seven Norwegian salmon farms. Results from standard macroinvertebrate-monitoring of the same samples were used as reference to compare the accuracy of both approaches. First, SML outperformed the IndVal approach to infer EQ from eDNA metabarcodes. The Random Forest (RF) algorithm appeared to be less sensitive to noisy data (a typical feature of massive environmental sequence data sets) and uneven data coverage across EQ classes (a typical feature of environmental compliance monitoring scheme) compared to a widely used method to infer IndVals for the calculation of a BI. Second, bacteria allowed for a more accurate EQ assessment than ciliate eDNA metabarcodes. For the implementation of DNA metabarcoding into routine monitoring programmes to assess EQ around salmon aquaculture cages, we therefore recommend bacterial DNA metabarcodes in combination with SML to classify EQ categories based on molecular signatures.
Asunto(s)
Ecosistema , Salmón , Animales , Acuicultura , Biodiversidad , Código de Barras del ADN Taxonómico , Ambiente , Monitoreo del Ambiente , Noruega , Salmón/genética , Aprendizaje Automático SupervisadoRESUMEN
Most molluscs possess shells, constructed from a vast array of microstructures and architectures. The fully formed shell is composed of calcite or aragonite. These CaCO3 crystals form complex biocomposites with proteins, which although typically less than 5% of total shell mass, play significant roles in determining shell microstructure. Despite much research effort, large knowledge gaps remain in how molluscs construct and maintain their shells, and how they produce such a great diversity of forms. Here we synthesize results on how shell shape, microstructure, composition and organic content vary among, and within, species in response to numerous biotic and abiotic factors. At the local level, temperature, food supply and predation cues significantly affect shell morphology, whilst salinity has a much stronger influence across latitudes. Moreover, we emphasize how advances in genomic technologies [e.g. restriction site-associated DNA sequencing (RAD-Seq) and epigenetics] allow detailed examinations of whether morphological changes result from phenotypic plasticity or genetic adaptation, or a combination of these. RAD-Seq has already identified single nucleotide polymorphisms associated with temperature and aquaculture practices, whilst epigenetic processes have been shown significantly to modify shell construction to local conditions in, for example, Antarctica and New Zealand. We also synthesize results on the costs of shell construction and explore how these affect energetic trade-offs in animal metabolism. The cellular costs are still debated, with CaCO3 precipitation estimates ranging from 1-2 J/mg to 17-55 J/mg depending on experimental and environmental conditions. However, organic components are more expensive (~29 J/mg) and recent data indicate transmembrane calcium ion transporters can involve considerable costs. This review emphasizes the role that molecular analyses have played in demonstrating multiple evolutionary origins of biomineralization genes. Although these are characterized by lineage-specific proteins and unique combinations of co-opted genes, a small set of protein domains have been identified as a conserved biomineralization tool box. We further highlight the use of sequence data sets in providing candidate genes for in situ localization and protein function studies. The former has elucidated gene expression modularity in mantle tissue, improving understanding of the diversity of shell morphology synthesis. RNA interference (RNAi) and clustered regularly interspersed short palindromic repeats - CRISPR-associated protein 9 (CRISPR-Cas9) experiments have provided proof of concept for use in the functional investigation of mollusc gene sequences, showing for example that Pif (aragonite-binding) protein plays a significant role in structured nacre crystal growth and that the Lsdia1 gene sets shell chirality in Lymnaea stagnalis. Much research has focused on the impacts of ocean acidification on molluscs. Initial studies were predominantly pessimistic for future molluscan biodiversity. However, more sophisticated experiments incorporating selective breeding and multiple generations are identifying subtle effects and that variability within mollusc genomes has potential for adaption to future conditions. Furthermore, we highlight recent historical studies based on museum collections that demonstrate a greater resilience of molluscs to climate change compared with experimental data. The future of mollusc research lies not solely with ecological investigations into biodiversity, and this review synthesizes knowledge across disciplines to understand biomineralization. It spans research ranging from evolution and development, through predictions of biodiversity prospects and future-proofing of aquaculture to identifying new biomimetic opportunities and societal benefits from recycling shell products.
Asunto(s)
Biomimética , Agua de Mar , Animales , Acuicultura , Concentración de Iones de Hidrógeno , Moluscos/genéticaRESUMEN
Human-induced climate change and ocean acidification (CC-OA) is changing the physical and biological processes occurring within the marine environment, with poorly understood implications for marine life. Within the aquaculture sector, molluskan culture is a relatively benign method of producing a high-quality, healthy, and sustainable protein source for the expanding human population. We modeled the vulnerability of global bivalve mariculture to impacts of CC-OA over the period 2020-2100, under RCP8.5. Vulnerability, assessed at the national level, was dependent on CC-OA-related exposure, taxon-specific sensitivity and adaptive capacity in the sector. Exposure risk increased over time from 2020 to 2100, with ten nations predicted to experience very high exposure to CC-OA in at least one decade during the period 2020-2100. Predicted high sensitivity in developing countries resulted, primarily, from the cultivation of species that have a narrow habitat tolerance, while in some European nations (France, Ireland, Italy, Portugal, and Spain) high sensitivity was attributable to the relatively high economic value of the shellfish production sector. Predicted adaptive capacity was low in developing countries primarily due to governance issues, while in some developed countries (Denmark, Germany, Iceland, Netherlands, Sweden, and the United Kingdom) it was linked to limited species diversity in the sector. Developing and least developed nations (n = 15) were predicted to have the highest overall vulnerability. Across all nations, 2060 was identified as a tipping point where predicted CC-OA will be associated with the greatest challenge to shellfish production. However, rapid declines in mollusk production are predicted to occur in the next decade for some nations, notably North Korea. Shellfish culture offers human society a low-impact source of sustainable protein. This research highlights, on a global scale, the likely extent and nature of the CC-OA-related threat to shellfish culture and this sector enabling early-stage adaption and mitigation.
RESUMEN
Novel hard substratum, introduced through offshore developments, can provide habitat for marine species and thereby function as an artificial reef. To predict the ecological consequences of deploying offshore infrastructure, and sustainably manage the installation of new structures, interactions between artificial reefs and marine ecosystem functions and services must be understood. This requires quantitative data on the relationships between secondary productivity and artificial reef design, across all trophic levels. Benthic secondary productivity is, however, one of the least studied processes on artificial reefs.In this study, we show that productivity rates of a common suspension feeder, Flustra foliacea (Linnaeus 1758), were 2.4 times higher on artificial reefs constructed from "complex" blocks than on reefs constructed from "simple" blocks, which had a smaller surface area.Productivity rates were highest on external areas of reefs. Productivity rates decreased by 1.56%, per cm distance into the reef on complex reefs and 2.93% per cm into the reef on simple block reefs. The differences in productivity rates between reefs constructed from simple and complex blocks are assumed to reflect different current regimes and food supply between the external and internal reef areas, according to reef type. Synthesis and applications. Our results show that artificial reef design can affect secondary productivity at low trophic levels. We demonstrate that the incorporation of voids into reef blocks can lead to a greater proportion of the structure serving as functional habitat for benthic species. By including such modifications into the design of artificial reefs, it may be possible to increase the overall productivity capacity of artificial structures.
RESUMEN
Effective and precise grouping of highly similar sequences remains a major bottleneck in the evaluation of high-throughput sequencing datasets. Amplicon sequence variants (ASVs) offer a promising alternative that may supersede the widely used operational taxonomic units (OTUs) in environmental sequencing studies. We compared the performance of a recently developed pipeline based on the algorithm DADA2 for obtaining ASVs against a pipeline based on the algorithm SWARM for obtaining OTUs. Illumina-sequencing of 29 individual ciliate species resulted in up to 11 ASVs per species, while SWARM produced up to 19 OTUs per species. To improve the congruency between species diversity and molecular diversity, we applied sequence similarity networks (SSNs) for second-level sequence grouping into network sequence clusters (NSCs). At 100% sequence similarity in SWARM-SSNs, NSC numbers decreased from 7.9-fold overestimation without abundance filter, to 4.5-fold overestimation when an abundance filter was applied. For the DADA2-SSN approach, NSC numbers decreased from 3.5-fold to 3-fold overestimation. Rand index cluster analyses predicted best binning results between 97% and 94% sequence similarity for both DADA2-SSNs and SWARM-SSNs. Depending on the ecological questions addressed in an environmental sequencing study with protists we recommend ASVs as replacement for OTUs, best in combination with SSNs.
Asunto(s)
Algoritmos , Biodiversidad , ADN Ambiental/genética , Monitoreo del Ambiente/métodos , Eucariontes/clasificación , Eucariontes/genética , Cilióforos/clasificación , Cilióforos/genética , Análisis por Conglomerados , ADN Ambiental/análisis , Variación Genética , Secuenciación de Nucleótidos de Alto Rendimiento , FilogeniaRESUMEN
The spatial extent of human activities must be understood for consistent and proportionate regulation, and effective marine planning. Redundant offshore pipelines can be removed or left in situ, but data on the footprint of these options are not readily available. The extents of three North Sea in situ decommissioning scenarios are presented. Leaving pipelines in situ would occupy <0.01% (12.3â¯km2) of UK waters, and this was similar to, or smaller than, other regulated activities (e.g. aggregate extraction). Adding armouring to large pipelines occupied up to 95â¯km2, while creating fisheries exclusion zones occupied up to 1119â¯km2. Removal of pipelines >30â³ would be required to regain 50% or more of the seabed currently occupied. At present, the technology to remove pipelines >16â³ safely and cost-efficiently is untested for large-scale decommissioning projects. The summaries presented inform the debate over the significance of decommissioning, and the regional consequences of different options.
Asunto(s)
Conservación de los Recursos Naturales , Explotaciones Pesqueras , Yacimiento de Petróleo y Gas , Industria del Petróleo y Gas , Conservación de los Recursos Naturales/economía , Conservación de los Recursos Naturales/legislación & jurisprudencia , Política Ambiental , Mar del Norte , Reino UnidoRESUMEN
Environmental diversity surveys are crucial for the bioassessment of anthropogenic impacts on marine ecosystems. Traditional benthic monitoring relying on morphotaxonomic inventories of macrofaunal communities is expensive, time-consuming and expertise-demanding. High-throughput sequencing of environmental DNA barcodes (metabarcoding) offers an alternative to describe biological communities. However, whether the metabarcoding approach meets the quality standards of benthic monitoring remains to be tested. Here, we compared morphological and eDNA/RNA-based inventories of metazoans from samples collected at 10 stations around a fish farm in Scotland, including near-cage and distant zones. For each of 5 replicate samples per station, we sequenced the V4 region of the 18S rRNA gene using the Illumina technology. After filtering, we obtained 841,766 metazoan sequences clustered in 163 Operational Taxonomic Units (OTUs). We assigned the OTUs by combining local BLAST searches with phylogenetic analyses. We calculated two commonly used indices: the Infaunal Trophic Index and the AZTI Marine Biotic Index. We found that the molecular data faithfully reflect the morphology-based indices and provides an equivalent assessment of the impact associated with fish farms activities. We advocate that future benthic monitoring should integrate metabarcoding as a rapid and accurate tool for the evaluation of the quality of marine benthic ecosystems.
Asunto(s)
Organismos Acuáticos , Biodiversidad , Ecosistema , Animales , Biología Computacional/métodos , Código de Barras del ADN Taxonómico , Monitoreo del Ambiente , Secuenciación de Nucleótidos de Alto RendimientoRESUMEN
The measurement of species diversity represents a powerful tool for assessing the impacts of human activities on marine ecosystems. Traditionally, the impact of fish farming on the coastal environment is evaluated by monitoring the dynamics of macrobenthic infaunal populations. However, taxonomic sorting and morphology-based identification of the macrobenthos demand highly trained specialists and are extremely time-consuming and costly, making it unsuitable for large-scale biomonitoring efforts involving numerous samples. Here, we propose to alleviate this laborious task by developing protist metabarcoding tools based on next-generation sequencing (NGS) of environmental DNA and RNA extracted from sediment samples. In this study, we analysed the response of benthic foraminiferal communities to the variation of environmental gradients associated with salmon farms in Scotland. We investigated the foraminiferal diversity based on ribosomal minibarcode sequences generated by the Illumina NGS technology. We compared the molecular data with morphospecies counts and with environmental gradients, including distance to cages and redox used as a proxy for sediment oxygenation. Our study revealed high variations between foraminiferal communities collected in the vicinity of fish farms and at distant locations. We found evidence for species richness decrease in impacted sites, especially visible in the RNA data. We also detected some candidate bioindicator foraminiferal species. Based on this proof-of-concept study, we conclude that NGS metabarcoding using foraminifera and other protists has potential to become a new tool for surveying the impact of aquaculture and other industrial activities in the marine environment.
Asunto(s)
Código de Barras del ADN Taxonómico/métodos , Monitoreo del Ambiente/métodos , Explotaciones Pesqueras , Foraminíferos/clasificación , Foraminíferos/genética , Sedimentos Geológicos/parasitología , Secuenciación de Nucleótidos de Alto Rendimiento/métodos , Animales , Biodiversidad , Humanos , Salmón/crecimiento & desarrollo , EscociaRESUMEN
The number of man-made structures to be placed in the marine environment is set to increase massively in the near future as a consequence of the wide-scale adoption and commercialisation of offshore electricity generation. Marine renewable energy devices (MREDs) interact with their receiving environment and are de-facto artificial reefs. The Loch Linnhe Artificial Reef (LLR) complex is a large-scale experimental facility, with the main matrix consisting of 30 separate reef modules deployed in 10-30 m depth and over a gradient of hydrographic and sedimentological conditions. The LLR offers potential to examine impacts that are analogous to those likely to occur around MREDs. The extent of the impact of the LLR modules on the receiving environment was assessed by determining their effect on sedimentary redox potential, as a function of distance from the reef-edge, and season, using an innovative, hand-held, underwater redox probe. The results are commensurate with the reef-proximal baffling of water flow resulting in the entrapment of drifting phytodetritus. At the least current-exposed reef-group the expected decrease in mean redox, at 80 mm sediment depth, was 80 mV (95% CI 40, 120 mV) but this effect was not observed more than 1 m from the reef edge and only occurred during summer months (water temperature >10 °C). Redox at the reef edge, particularly during summer months, was more variable compared to redox taken at 1 m and 4 m reef-distance and was associated with the patchy distribution of phytodetrital accumulations. At all reef groups, there was no discernible difference in modelled mean redox between observations taken at 1 m and 4 m-reef distance. Artificial structures, including MREDs, may cause quite major sedimentary changes but this evidence suggests that these effects will be of limited spatial scale and, where phytodetrital accumulations occur, are only likely to be detrimental in oxygen-deficient sediments. Where these changes occur at well-flushed sites they are likely to be associated with increased infaunal biomass typical of moderate organic enrichment.
Asunto(s)
Conservación de los Recursos Energéticos , Ecosistema , Monitoreo del Ambiente , Sedimentos Geológicos/química , Viento , Organismos Acuáticos , Biomasa , Oxidación-Reducción , Oxígeno/análisis , Escocia , Estaciones del AñoRESUMEN
Aquaculture, as a means of food production, is growing rapidly in response to an increasing demand for protein and the over-exploitation of wild fisheries. This expansion includes mussels (family Mytilidae) where production currently stands at 1.5 million tonnes per annum. Mussel culture is frequently perceived as having little environmental impact yet mussel biodeposits and shell debris accumulate around the production site and are linked to changes in the benthos. To assess the extent and nature of changes in benthos associated with mussel farming grab and video sampling around seven mussel farms was conducted. Grab samples were analysed for macrofauna and shell-hash content whilst starfish were counted and the shell-hash cover estimated from video imaging. Shell-hash was patchily distributed and occasionally dominated sediments (maximum of 2116 g per 0.1 m(2) grab). Mean shell-hash content decreased rapidly at distances >5 m from the line and, over the distance 1-64 m, decreased by three orders of magnitude. The presence of shell-hash and the distance-from-line influenced macrofaunal assemblages but this effect differed between sites. There was no evidence that mussel farming was associated with changes in macrobenthic diversity, species count or feeding strategy. However, total macrofaunal count was estimated to be 2.5 times higher in close proximity to the lines, compared with 64 m distance, and there was evidence that this effect was conditional on the presence of shell-hash. Starfish density varied considerably between sites but, overall, they were approximately 10 times as abundant close to the mussel-lines compared with 64 m distance. There was no evidence that starfish were more abundant in the presence of shell-hash visible on the sediment surface. In terms of farm-scale benthic impacts these data suggest that mussel farming is a relatively benign way of producing food, compared with intensive fish-farming, in similar environments.
Asunto(s)
Acuicultura , Ecosistema , Mytilus edulis/crecimiento & desarrollo , Análisis de Varianza , Animales , Geografía , Modelos Teóricos , Análisis Multivariante , EscociaRESUMEN
Aquaculture is growing rapidly in response to an increasing demand for protein and the over-exploitation of wild fisheries. Mussel (family Mytilidae) production has doubled over the last decade and currently stands at 1.5 million tones production per annum. Mussels produce organic biodeposits which are dispersed around the production site and, potentially, impact the receiving environment in a number of inter-linked ways. The reported benthic impacts that occur, primarily through the accumulation of these biodeposits and associated organic enrichment, vary widely between studies. The objectives of this research were to determine the nature of the relationship between sediment redox (a proxy for oxygenation) and farm-proximity and covariables whilst accounting for, and quantifying, differences in redox between sites. Sediment cores (N = 159) were taken remotely around a random sample of mussel farms, redox was measured at 10 mm sediment depth and linked to farm-distance and sediment organic/shell content and particle size, using an additive, mixed, weighted regression model. Redox varied considerably between sites and there was a highly significant reduction (50 mV) in redox adjacent to the mussel lines. Redox increased non-linearly with distance, rising rapidly at >7 m from the farm edge. The modest reduction in sediment oxygenation in close proximity to mussel farms reported here suggests that farms located over sediments characterised by pre-existing oxygen stress are likely to exacerbate benthic species impoverishment associated with reducing sedimentary conditions whilst those located over highly oxygenated sediments are likely to increase benthic productivity.
Asunto(s)
Acuicultura/tendencias , Sedimentos Geológicos/química , Mytilus edulis/metabolismo , Oxígeno/química , Animales , Biota , Monitoreo del Ambiente , Oxidación-Reducción , Tamaño de la Partícula , Análisis de Regresión , EscociaRESUMEN
The rapid development of the offshore renewable energy sector has led to an increased requirement for Marine Spatial Planning (MSP) and, increasingly, this is carried out in the context of the 'ecosystem approach' (EA) to management. We demonstrate a novel method to facilitate implementation of the EA. Using a real-time interactive mapping device (touch-table) and stakeholder workshops we gathered data and facilitated negotiation of spatial trade-offs at a potential site for tidal renewable energy off the Mull of Kintyre (Scotland). Conflicts between the interests of tidal energy developers and commercial and recreational users of the area were identified, and use preferences and concerns of stakeholders were highlighted. Social, cultural and spatial issues associated with conversion of common pool to private resource were also revealed. The method identified important gaps in existing spatial data and helped to fill these through interactive user inputs. The workshops developed a degree of consensus between conflicting users on the best areas for potential development suggesting that this approach should be adopted during MSP.
Asunto(s)
Ecosistema , Energía Renovable , Agua de Mar , Movimientos del Agua , Congresos como Asunto , Técnicas de Apoyo para la Decisión , Geografía , EscociaRESUMEN
Topographic complexity (TC) is an important factor in determining community structure in aquatic habitats and there are numerous methods for its estimation. Here we assess and compare three (chain, divider and distance-wheel) methods across different users and substrata over scales of 78-1030 mm. All three techniques showed the same basic trend in TC over different substrata. However, the chain took approximately 1.5x as long to use, at larger-scales (>271 mm), as the other techniques and resulted in highly variable TC estimates. The chain and divider techniques both have the potential to miss relevantly scaled TC depending on the survey starting point, a disadvantage not suffered by the distance-wheel. TC measured using the distance-wheel was approximately 1.8x that recorded by the divider technique and significantly (P<0.05) less variable compared with the chain technique. The distance-wheel was rapid and easy to use, superior in accessing awkward topographies and has considerable potential for improvement. It is recommended as a technique for estimating the TC of rock-surfaces at scales >50 mm.