Decontamination of metals from firefighter turnout gear.

Firefighters are exposed to many different contaminants during structural fires. Moreover, if their protective gear is not successfully decontaminated, firefighters are at risk of being repeatedly exposed to contaminants from previous fires. Thus, the successful removal of contaminants from firefighter turnout gear is necessary to prevent or reduce repeated exposure risks. Laundering methods can reduce the probability of re-exposure to contaminants, such as heavy metals, thus reducing repeated exposure risks. In this study, the efficiencies of heavy metal removal from the firefighter turnout gear outer textile by Decon7 cleaning solution and a standard reference detergent were compared. Nitric acid digests were used to extract metals from textile samples, which were cut from small sections of firefighter jackets, before and after their laundering with either cleaning solution. Inductively coupled plasma mass spectrometry (ICP-MS) was utilized to determine metal contents, including arsenic (As), antimony (Sb), cadmium (Cd), chromium (Cr), and lead (Pb) concentrations. Results from multiplicate samples indicated that, on average, Decon7 was significantly more efficient than a standard detergent in decreasing the concentrations of the five metals studied herein.

Bacteria Associated with Healthcare-Associated Infections on Environmental Samples Obtained from Two Fire Departments.

(1) Background: Firefighters spend about 64% of their time responding to medical emergencies and providing medical care without a patient history, which can render them vulnerable to healthcare-associated infections (HAI). Infection prevention, control, and surveillance systems have been instituted at hospitals. However, the prevalence of firefighters' exposure to HAI is unknown. The objective of this study was to document evidence of HAI on surfaces in fire stations and engines to inform disinfection procedures and identify which pathogens might contribute to occupational exposures. (2) Methods: High-touch or high-use surfaces of two fire departments were sampled during five separate occasions. One fire station from one fire department was sampled over a 4-week period, whereas four fire stations were sampled from a different fire department only once. Sampled surfaces included: entryway floor, washing machine, medical bag, back seat of engine, keyboard of reporting computer, engine console, and uniform pants. (3) Results: Multiple statistical models determined that bacterial contamination was similar between the two fire departments and their stations. Keyboards were the most contaminated surface for all fire stations and departments, E. coli was the most common bacteria detected, and C. difficile was the least detected bacteria. Adjustments for rates of contamination found that contamination rates varied between fire stations. (4) Conclusions: Comprehensive environmental sampling and clinical studies are needed to better understand occupational exposures of firefighters to HAI.

Redesign of hydrophobic quantum dots mitigates ligand-dependent toxicity in the nematode C. elegans.

Surface properties of engineered nanomaterials (ENMs) have been shown to influence their interaction with biological systems. However, studies to date have largely focused on hydrophilic materials, likely due to biocompatibility concerns and aqueous exposure conditions necessary for many model systems. Therefore, a knowledge gap exists in nanotoxicity literature for impacts of hydrophobic ENMs, with studies of hydrophobic materials largely limited to carbon ENMs. Here we demonstrate testing of hydrophobic quantum dots (QDs) using the nematode C. elegans, a model soil organism cultured on solid media and amenable to hydrophobic exposures. To evaluate the influence of hydrophobicity, we compared CdSe/ZnS QDs functionalized with hydrophobic trioctylphosphine oxide (TOPO) to identical QDs functionalized with hydrophilic dihydrolipoic acid-polyethylene glycol (DHLA-PEG) and alternative hydrophobic CdSe/ZnS QDs functionalized with oleic acid (OA). Results show that hydrophobic TOPO QDs are significantly more toxic than hydrophilic DHLA-PEG QDs, and substitution of TOPO with OA yields relatively non-toxic hydrophobic QDs. Fluorescence microscopy shows TOPO QDs loosely associated with the organism's cuticle, but atomic force microscopy shows no difference in cuticle structure from exposure. Importantly, TOPO ligand alone is as toxic as TOPO QDs, and our data suggests that TOPO may impact neuromuscular function, perhaps upon displacement from the QD surface. This study demonstrates the importance of examining ligand-specific impacts of hydrophobic ENMs and indicates OA-functionalized QDs as a potential alternative to TOPO QDs for reduced toxicity.

Poly(oxanorbornene)-Coated CdTe Quantum Dots as Antibacterial Agents.

In this study, synthetic mimics of antimicrobial peptides based on poly(oxanorbornene) molecules (or PONs) were used to coat CdTe quantum dots (QDs). These PONs-CdTe QDs were investigated for their activity against Escherichia coli, a bacterium with antibiotic resistant strains. At the same time, the antibacterial activity of the PONs-CdTe QDs was compared to the antibacterial activity of free PONs and free CdTe QDs. The observed antibacterial activity of the PONs-CdTe QDs was additive and concentration dependent. The conjugates had a significantly lower minimum inhibitory concentration (MIC) than the free PONs and QDs, particularly for PONs-CdTe QDs which contained PONs of high amine density. The maximum activity of PONs-CdTe QDs was not realized by conjugating PONs with the highest intrinsic antibacterial activity (i.e., the lowest MIC in solution as free PONs), indicating that the mechanism of action for free PONs and PONs-CdTe QDs is different. Equally important, conjugating PONs to CdTe QDs decreased their hemolytic activity against red blood cells compared to free PONs, lending to higher therapeutic indices against E. coli. This could potentially enable the use of higher, and therefore more effective, PONs-QDs concentrations when addressing bacterial contamination, without concerns of adverse impacts on mammalian cells and organisms.

Malic Acid Carbon Dots: From Super-resolution Live-Cell Imaging to Highly Efficient Separation.

As-synthesized malic acid carbon dots are found to possess photoblinking properties that are outstanding and superior compared to those of conventional dyes. Considering their excellent biocompatibility, malic acid carbon dots are suitable for super-resolution fluorescence localization microscopy under a variety of conditions, as we demonstrate in fixed and live trout gill epithelial cells. In addition, during imaging experiments, the so-called "excitation wavelength-dependent" emission was not observed for individual as-made malic acid carbon dots, which motivated us to develop a time-saving and high-throughput separation technique to isolate malic acid carbon dots into fractions of different particle size distributions using C18 reversed-phase silica gel column chromatography. This post-treatment allowed us to determine how particle size distribution influences the optical properties of malic acid carbon dot fractions, that is, optical band gap energies and photoluminescence behaviors.

Adverse Interactions of Luminescent Semiconductor Quantum Dots with Liposomes and Shewanella oneidensis.

Cadmium-containing luminescent quantum dots (QD) are increasingly used in display, bioimaging, and energy technologies; however, significant concerns have been raised about their potentially adverse impact on human health and the environment. This study makes use of a broad toolkit of analytical methods to investigate and increase our understanding of the interactions of luminescent cadmium-containing (CdSe) and cadmium-free (ZnSe) QD, with and without a passivating higher bandgap energy ZnS shell, with phospholipid vesicles (liposomes), which model bacterial membranes, and with Shewanella oneidensis MR-1, an environmentally relevant bacteria. A unique feature of this study is that all QD types have the same surface chemistry, being capped with uncharged poly(ethylene glycol) ligands. This enables focusing the study on the impact of the QD core on liposomes and bacterial cells. The study reveals that QD association with liposome and bacterial cell membranes is imperative for their adverse impact on liposomes and bacterial cells. The QD' concentration-dependent association with liposomes and bacterial cells destabilizes the membranes mechanically, which leads to membrane disruption and lysis in liposomes and to bacterial cell death. The study also shows that cadmium-containing QD exhibit a higher level of membrane disruption in bacterial cells than cadmium-free QD. ZnSe QD have low membrane impact, and coating them with a ZnS shell decreases their membrane disruption activity. In contrast, CdSe QD exhibit a high level of membrane impact, and coating them with a ZnS shell does not decrease, but in fact further increases, their membrane disruption activity. This behavior might be attributed to higher affinity and association of CdSe/ZnS QD with liposomes and bacterial cells and to a contribution of dissolved zinc ions from the ZnS shell to increased membrane disruption activity.

Addition of Fluorescence Lifetime Spectroscopy to the Tool Kit Used to Study the Formation and Degradation of Luminescent Quantum Dots in Solution.

The increasing commercialization of consumer electronic products that make use of II-VI semiconductor quantum dots (QDs) has raised significant concerns about their impact on natural systems and human health once they are released into the environment at the end of the product's lifetime. In this paper, we demonstrate the addition of fluorescence lifetime spectroscopy to the existing tool kit of spectroscopic techniques to quantitatively monitor changes in QD properties as they form and degrade in solution. Our study reveals that because of its rich information content, fluorescence lifetime spectroscopy has a limited utility as a stand-alone technique in the study of QD formation and degradation. However, combining fluorescence lifetime spectroscopy with the commonly used emission quantum yield and peak width measurements along with other analytical methods, including ultraviolet-visible spectroscopy, transmission electron microscopy, and inductively coupled plasma mass spectrometry measurements, significantly enhances the existing analytical tool kit and provides the capability to monitor in real time, the formation and degradation of luminescent QDs in organic and aqueous solutions under environmentally relevant conditions.