A suicidal and extensively disordered luciferase with a bright luminescence.

Gaussia luciferase (GLuc) is one of the most luminescent luciferases known and is widely used as a reporter in biochemistry and cell biology. During catalysis, GLuc undergoes inactivation by irreversible covalent modification. The mechanism by which GLuc generates luminescence and how it becomes inactivated are however not known. Here, we show that GLuc unlike other enzymes has an extensively disordered structure with a minimal hydrophobic core and no apparent binding pocket for the main substrate, coelenterazine. From an alanine scan, we identified two Arg residues required for light production. These residues separated with an average of about 22 Å and a major structural rearrangement is required if they are to interact with the substrate simultaneously. We furthermore show that in addition to coelenterazine, GLuc also can oxidize furimazine, however, in this case without production of light. Both substrates result in the formation of adducts with the enzyme, which eventually leads to enzyme inactivation. Our results demonstrate that a rigid protein structure and substrate-binding site are no prerequisites for high enzymatic activity and specificity. In addition to the increased understanding of enzymes in general, the findings will facilitate future improvement of GLuc as a reporter luciferase.

Increasing protein stability by inferring substitution effects from high-throughput experiments.

We apply a computational model, global multi-mutant analysis (GMMA), to inform on effects of most amino acid substitutions from a randomly mutated gene library. Using a high mutation frequency, the method can determine mutations that increase the stability of even very stable proteins for which conventional selection systems have reached their limit. As a demonstration of this, we screened a mutant library of a highly stable and computationally redesigned model protein using an in vivo genetic sensor for folding and assigned a stability effect to 374 of 912 possible single amino acid substitutions. Combining the top 9 substitutions increased the unfolding energy 47 to 69 kJ/mol in a single engineering step. Crystal structures of stabilized variants showed small perturbations in helices 1 and 2, which rendered them closer in structure to the redesign template. This case study illustrates the capability of the method, which is applicable to any screen for protein function.

Co-evolution of drug resistance and broadened substrate recognition in HIV protease variants isolated from an Escherichia coli genetic selection system.

A genetic selection system for activity of HIV protease is described that is based on a synthetic substrate constructed as a modified AraC regulatory protein that when cleaved stimulate l-arabinose metabolism in an Escherichia coli araC strain. Growth stimulation on selective plates was shown to depend on active HIV protease and the scissile bond in the substrate. In addition, the growth of cells correlated well with the established cleavage efficiency of the sites in the viral polyprotein, Gag, when these sites were individually introduced into the synthetic substrate of the selection system. Plasmids encoding protease variants selected based on stimulation of cell growth in the presence of saquinavir or cleavage of a site not cleaved by wild-type protease, were indistinguishable with respect to both phenotypes. Also, both groups of selected plasmids encoded side chain substitutions known from clinical isolates or displayed different side chain substitutions but at identical positions. One highly frequent side chain substitution, E34V, not regarded as a major drug resistance substitution was found in variants obtained under both selective conditions and is suggested to improve protease processing of the synthetic substrate. This substitution is away from the substrate-binding cavity and together with other substitutions in the selected reading frames supports the previous suggestion of a substrate-binding site extended from the active site binding pocket itself.

The functional role of the autolysis loop in the regulation of factor X upon hemostatic response.

BACKGROUND: The regulation of factor X (FX) is critical to maintain the balance between blood coagulation and fluidity. OBJECTIVES: To functionally characterize the role of the FX autolysis loop in the regulation of the zymogen and active form of FX. METHODS: We introduced novel N-linked glycosylations on the surface-exposed loop spanning residues 143-150 (chymotrypsin numbering) of FX. The activity and inhibition of recombinant FX variants was quantified in pure component assays. The in vitro thrombin generation potential of the FX variants was evaluated in FX-depleted plasma. RESULTS: The factor VIIa (FVIIa)-mediated activation and prothrombin activation was reduced, presumably through steric hinderance. Prothrombin activation was, however, recovered in presence of cofactor factor Va (FVa) despite a reduced prothrombinase assembly. The introduced N-glycans exhibited position-specific effects on the interaction with two FXa inhibitors: tissue factor pathway inhibitor (TFPI) and antithrombin (ATIII). Ki for the inhibition by full-length TFPI of these FXa variants was increased by 7- to 1150-fold, whereas ATIII inhibition in the presence of the heparin-analog Fondaparinux was modestly increased by 2- to 15-fold compared with wild-type. When supplemented in zymogen form, the FX variants exhibited reduced thrombin generation activity relative to wild-type FX, whereas enhanced procoagulant activity was measured for activated FXa variants. CONCLUSION: The autolysis loop participates in all aspects of FX regulation. In plasma-based assays, a modest decrease in FX activation rate appeared to knock down the procoagulant response even when down regulation of FXa activity by inhibitors was reduced.

Computational and Experimental Assessment of Backbone Templates for Computational Redesign of the Thioredoxin Fold.

Computational protein design has taken big strides in recent years; however, the tools available are still not at a state where a sequence can be designed to fold into a given protein structure at will and with high probability. We have applied here a recent release of Rosetta Design to redesign a set of structurally very similar proteins belonging to the thioredoxin fold. We used a genetic screening tool to estimate solubility/folding of the designed proteins in E. coli and to select the best hits from this for further biochemical characterization. We have previously used this set of template proteins for redesign and found that success was highly dependent on template structure, a trait which was also found in this study. Nevertheless, state-of-the-art design software is now able to predict the best template, most likely due to the introduction of an energy term that reports on stress in covalent bond lengths and angles. The template that led to the greatest fraction of successful designs was the same (a thioredoxin from spinach) as that identified in our previous study. Our previously described redesign of thioredoxin, which also used the spinach protein as a template, however also performed well as a template. In the present study, both of these templates yielded proteins with compact folded structures and enforced the conclusion that any design project must carefully consider different design templates. Fortunately, selecting designs based on energies appears to correctly identify such templates.

Charge Interactions in a Highly Charge-Depleted Protein.

Electrostatic forces are important for protein folding and are favored targets of protein engineering. However, interactions between charged residues are difficult to study because of the complex network of interactions found in most proteins. We have designed a purposely simple system to investigate this problem by systematically introducing individual and pairs of charged and titratable residues in a protein otherwise free of such residues. We used constant pH molecular dynamics simulations, NMR spectroscopy, and thermodynamic double mutant cycles to probe the structure and energetics of the interaction between the charged residues. We found that the partial burial of surface charges contributes to a shift in pKa value, causing an aspartate to titrate in the neutral pH range. Additionally, the interaction between pairs of residues was found to be highly context dependent, with some pairs having no apparent preferential interaction, while other pairs would engage in coupled titration forming a highly stabilized salt bridge. We find good agreement between experiments and simulations and use the simulations to rationalize our observations and to provide a detailed mechanistic understanding of the electrostatic interactions.

Pulmonary effects of nanofibrillated celluloses in mice suggest that carboxylation lowers the inflammatory and acute phase responses.

We studied if the pulmonary and systemic toxicity of nanofibrillated celluloses can be reduced by carboxylation. Nanofibrillated celluloses administered at 6 or 18 µg to mice by intratracheal instillation were: 1) FINE NFC, 2-20 µm in length, 2-15 nm in width, 2) AS (-COOH), carboxylated, 0.5-10 µm in length, 4-10 nm in width, containing the biocide BIM MC4901 and 3) BIOCID FINE NFC: as (1) but containing BIM MC4901. FINE NFC administration increased neutrophil influx in BAL and induced SAA3 in plasma. AS (-COOH) produced lower neutrophil influx and systemic SAA3 levels than FINE NFC. Results obtained with BIOCID FINE NFC suggested that BIM MC4901 biocide did not explain the lowered response. Increased DNA damage levels were observed across materials, doses and time points. In conclusion, carboxylation of nanofibrillated cellulose was associated with reduced pulmonary and systemic toxicity, suggesting involvement of OH groups in the inflammatory and acute phase responses.

Can a Charged Surfactant Unfold an Uncharged Protein?

Does sodium dodecyl sulfate (SDS) denature proteins through electrostatic SDS-protein interactions? We show that a protein completely lacking charged side chains is unfolded by SDS in a manner similar to charged proteins, revealing that formal protein charges are not required for SDS-induced protein unfolding or binding.

Positive staining for cellulose in oral pulse granuloma.

OBJECTIVE: Oral pulse granuloma (OPG) is an oral inflammatory lesion characterized by the presence of hyaline rings with numerous multinucleated giant cells. The etiopathogenesis of this lesion is thus far unclear, as is the composition of the hyaline rings. Our aim was to investigate whether the hyaline rings contain cellulose. STUDY DESIGN: Using a newly developed staining method for cellulose, we studied 18 histologic samples diagnosed as OPG, in addition to 3 samples originally diagnosed as "normal" foreign body reactions. In our study, visualization of cellulose is based on its specific binding to the carbohydrate binding module of ß-1,4-glycanase. RESULTS: All samples diagnosed as OPG were positive for cellulose staining localized in hyaline rings. In addition, 1 lesion (of 3), first diagnosed as a foreign body reaction without the presence of hyaline rings, was positive for cellulose by horseradish peroxidase staining. CONCLUSIONS: We show for the first time that cellulose is present in OPG lesions, indicating that cellulose might be the initial cause of formation of these lesions.

Visualization of Nanofibrillar Cellulose in Biological Tissues Using a Biotinylated Carbohydrate Binding Module of ß-1,4-Glycanase.

Nanofibrillar cellulose is a very promising innovation with diverse potential applications including high quality paper, coatings, and drug delivery carriers. The production of nanofibrillar cellulose on an industrial scale may lead to increased exposure to nanofibrillar cellulose both in the working environment and the general environment. Assessment of the potential health effects following exposure to nanofibrillar cellulose is therefore required. However, as nanofibrillar cellulose primarily consists of glucose moieties, detection of nanofibrillar cellulose in biological tissues is difficult. We have developed a simple and robust method for specific and sensitive detection of cellulose fibers, including nanofibrillar cellulose, in biological tissue, using a biotinylated carbohydrate binding module (CBM) of ß-1,4-glycanase (EXG:CBM) from the bacterium Cellulomonas fimi. EXG:CBM was expressed in Eschericia coli, purified, and biotinylated. EXG:CBM was shown to bind quantitatively to five different cellulose fibers including four different nanofibrillar celluloses. Biotinylated EXG:CBM was used to visualize cellulose fibers by either fluorescence- or horse radish peroxidase (HRP)-tagged avidin labeling. The HRP-EXG:CBM complex was used to visualize cellulose fibers in both cryopreserved and paraffin embedded lung tissue from mice dosed by pharyngeal aspiration with 10-200 µg/mouse. Detection was shown to be highly specific, and the assay appeared very robust. The present method represents a novel concept for the design of simple, robust, and highly specific detection methods for the detection of nanomaterials, which are otherwise difficult to visualize.

Metal-ion dependent catalytic properties of Sulfolobus solfataricus class ii α-mannosidase.

The active site for the family GH38 class II α-mannosidase is constituted in part by a divalent metal ion, mostly Zn(2+), as revealed in the crystal structures of enzymes from both animal and bacterial sources. The metal ion coordinates to the bound substrate and side chains of conserved amino acid residues. Recently, evidence has accumulated that class II α-mannosidase is active in complex with a range of divalent metal ions. In the present work, with employment of the class II α-mannosidase, ManA, from the hyperthermophilic archaeon Sulfolobus solfataricus, we explored the influence of the divalent metal ion on the associated steady-state kinetic parameters, K(M) and k(cat), for various substrates. With p-nitrophenyl-α-d-mannoside as a substrate, the enzyme showed activity in the presence of Co(2+), Cd(2+), Mn(2+), and Zn(2+), whereas Ni(2+) and Cu(2+) were inhibitory and nonactivating. Co(2+) was the preferred metal ion, with a k(cat)/K(M) value of about 120 mM(-1) s(-1), 6 times higher than that with Cd(2+) and Zn(2+) and 10 times higher than that with Mn(2+). With α-1,2-, α-1,3-, α-1,4-, or α-1,6-mannobiose as a substrate, Co(2+) was the only metal ion promoting hydrolysis of all substrates; however, Mn(2+), Cd(2+), and Zn(2+) could substitute to a varying extent. A change in the divalent metal ion generally affected the K(M) for the hydrolysis of p-nitrophenyl-α-d-mannoside; however, changes in both k(cat) and K(M) for the hydrolysis of α-mannobioses were observed, along with changing preferences for the glycosidic linkage. Finally, it was found that the metal ion and substrate bind in that order via a steady-state, ordered, sequential mechanism.

The human selenoprotein VCP-interacting membrane protein (VIMP) is non-globular and harbors a reductase function in an intrinsically disordered region.

The human selenoprotein VIMP (VCP-interacting membrane protein)/SelS (selenoprotein S) localizes to the endoplasmic reticulum (ER) membrane and is involved in the process of ER-associated degradation (ERAD). To date, little is known about the presumed redox activity of VIMP, its structure and how these features might relate to the function of the protein in ERAD. Here, we use the recombinantly expressed cytosolic region of VIMP where the selenocysteine (Sec) in position 188 is replaced with a cysteine (a construct named cVIMP-Cys) to characterize redox and structural properties of the protein. We show that Cys-188 in cVIMP-Cys forms a disulfide bond with Cys-174, consistent with the presence of a Cys174-Sec188 selenosulfide bond in the native sequence. For the disulfide bond in cVIMP-Cys we determined the reduction potential to -200 mV, and showed it to be a good substrate of thioredoxin. Based on a biochemical and structural characterization of cVIMP-Cys using analytical gel filtration, CD and NMR spectroscopy in conjunction with bioinformatics, we propose a comprehensive overall structural model for the cytosolic region of VIMP. The data clearly indicate the N-terminal half to be comprised of two extended α-helices followed by a C-terminal region that is intrinsically disordered. Redox-dependent conformational changes in cVIMP-Cys were observed only in the vicinity of the two Cys residues. Overall, the redox properties observed for cVIMP-Cys are compatible with a function as a reductase, and we speculate that the plasticity of the intrinsically disordered C-terminal region allows the protein to access many different and structurally diverse substrates.

Trisulfides in proteins.

Trisulfides and other oligosulfides are widely distributed in the biological world. In plants, for example, garlic, trisulfides are associated with potentially beneficial properties. However, an extra neutral sulfur atom covalently bound between the two sulfur atoms of a pair of cysteines is not a common post-translational modification, and the number of proteins in which a trisulfide has been unambiguously identified is small. Nevertheless, we believe that its prevalence may be underestimated, particularly with the increasing evidence for significant pools of sulfides in living tissues and their possible roles in cellular metabolism. This review focuses on examples of proteins that are known to contain a trisulfide bridge, and gives an overview of the chemistry of trisulfide formation, and the methods by which it is detected in proteins.