α-Alkylation and Asymmetric Transfer Hydrogenation of Tetralone via Hydrogen Borrowing and Dynamic Kinetic Resolution Strategy Using a Single Iridium(III) Complex.

Here we present a novel strategy for the synthesis of enantiomerically enriched tetrahydronaphthalen-1-ols. The reaction proceeds via an alkylation (via hydrogen borrowing) and ammonium formate-mediated asymmetric transfer hydrogenation (via dynamic kinetic resolution), giving alkylated tetralols in high yields and good enantio- and diastereoselectivity across a diverse range of both alcohol and tetralone substrates. Additionally, these products were successfully derivatized to several complex molecules, demonstrating the utility of the tetrahydronaphthalen-1-ol.

Competition between C-C and C-H Bond Fluorination: A Continuum of Electron Transfer and Hydrogen Atom Transfer Mechanisms.

In 2015, we reported a photochemical method for directed C-C bond cleavage/radical fluorination of relatively unstrained cyclic acetals using Selectfluor and catalytic 9-fluorenone. Herein, we provide a detailed mechanistic study of this reaction, during which it was discovered that the key electron transfer step proceeds through substrate oxidation from a Selectfluor-derived N-centered radical intermediate (rather than through initially suspected photoinduced electron transfer). This finding led to proof of concept for two new methodologies, demonstrating that unstrained C-C bond fluorination can also be achieved under chemical and electrochemical conditions. Moreover, as C-C and C-H bond fluorination reactions are both theoretically possible on 2-aryl-cycloalkanone acetals and would involve the same reactive intermediate, we studied the competition between single-electron transfer (SET) and apparent hydrogen-atom transfer (HAT) pathways in acetal fluorination reactions using density functional theory. Finally, these analyses were applied more broadly to other classes of C-H and C-C bond fluorination reactions developed over the past decade, addressing the feasibility of SET processes masquerading as HAT in C-H fluorination literature.

Sodium Isopropyl(trimethylsilyl)amide: A Stable and Highly Soluble Lithium Diisopropylamide Mimic.

The preparation, structure, physical properties, and reactivities of sodium isopropyl(trimethylsilyl)amide (NaPTA) are described. The solubilities at room temperature range from n-heptane (0.55 M), n-hexane (0.60 M), toluene (0.65 M), MTBE (1.7 M), Et3N (3.2 M), and THF (>6.0 M). The half-life to destruction in neat THF is >1 year at 25 °C and 7 days at 70 °C, which compares favorably to 2.5 months and 1.5 days, respectively, for LDA in neat THF. This study focuses on NaPTA in THF. 29Si NMR spectroscopy shows exclusively a mixture of cis and trans stereoisomeric dimers in 0.10-12 M THF in hexane. Density functional theory (DFT) computations suggest that the pKb is intermediate between dimeric sodium diisopropylamide (NaDA) and dimeric sodium hexamethyldisilazide (NaHMDS). Metalations of arenes, epoxides, ketones, hydrazones, alkenes, and alkyl halides show higher reactivities than LDA (kNaPTA/LDA = 1-30). While the rates of arene metalation are high, the lower pKb of NaPTA limits the substrates. Metalation of pseudoephedrate-based carboxamides to form disodiated Myers enolates solves several challenging technical problems.

Ketone Enolization with Sodium Hexamethyldisilazide: Solvent- and Substrate-Dependent E-Z Selectivity and Affiliated Mechanisms.

Ketone enolization by sodium hexamethyldisilazide (NaHMDS) shows a marked solvent and substrate dependence. Enolization of 2-methyl-3-pentanone reveals E-Z selectivities in Et3N/toluene (20:1), methyl-t-butyl ether (MTBE, 10:1), N,N,N',N″,N″-pentamethyldiethylenetriamine (PMDTA)/toluene (8:1), TMEDA/toluene (4:1), diglyme (1:1), DME (1:22), and tetrahydrofuran (THF) (1:90). Control experiments show slow or nonexistent stereochemical equilibration in all solvents except THF. Enolate trapping with Me3SiCl/Et3N requires warming to -40 °C whereas Me3SiOTf reacts within seconds. In situ enolate trapping at -78 °C using preformed NaHMDS/Me3SiCl mixtures is effective in Et3N/toluene yet fails in THF by forming (Me3Si)3N. Rate studies show enolization via mono- and disolvated dimers in Et3N/toluene, disolvated dimers in TMEDA, trisolvated monomers in THF/toluene, and free ions with PMDTA. Density functional theory computations explore the selectivities via the E- and Z-based transition structures. Failures of theory-experiment correlations of ionic fragments were considerable even when isodesmic comparisons could have canceled electron correlation errors. Swapping 2-methyl-3-pentanone with a close isostere, 2-methylcyclohexanone, causes a fundamental change in the mechanism to a trisolvated-monomer-based enolization in THF.

Reactions of Sodium Diisopropylamide: Liquid-Phase and Solid-Liquid Phase-Transfer Catalysis by N,N,N',N″,N″-Pentamethyldiethylenetriamine.

Sodium diisopropylamide (NaDA) in N,N-dimethylethylamine (DMEA) and DMEA-hydrocarbon mixtures with added N,N,N',N″,N″-pentamethyldiethylenetriamine (PMDTA) reacts with alkyl halides, epoxides, hydrazones, arenes, alkenes, and allyl ethers. Comparisons of PMDTA with N,N,N',N'-tetramethylethylenediamine (TMEDA) accompanied by detailed rate and computational studies reveal the importance of the trifunctionality and κ2-κ3 hemilability. Rate studies show exclusively monomer-based reactions of 2-bromooctane, cyclooctene oxide, and dimethylresorcinol. Catalysis with 10 mol % PMDTA shows up to >30-fold accelerations (kcat > 300) with no evidence of inhibition over 10 turnovers. Solid-liquid phase-transfer catalysis (SLPTC) is explored as a means to optimize the catalysis as well as explore the merits of heterogeneous reaction conditions.

Aggregation and Solvation of Sodium Hexamethyldisilazide: Across the Solvent Spectrum.

We report solution structures of sodium hexamethyldisilazide (NaHMDS) solvated by >30 standard solvents (ligands). These include: toluene, benzene, and styrene; triethylamine and related trialkylamines; pyrrolidine as a representative dialkylamine; dialkylethers including THF, tert-butylmethyl ether, and diethyl ether; dipolar ligands such as DMF, HMPA, DMSO, and DMPU; a bifunctional dipolar ligand nonamethylimidodiphosphoramide (NIPA); polyamines N,N,N',N'-tetramethylenediamine (TMEDA), N,N,N',N″,N″-pentamethyldiethylenetriamine (PMDTA), N,N,N',N'-tetramethylcyclohexanediamine (TMCDA), and 2,2'-bipyridine; polyethers 12-crown-4, 15-crown-5, 18-crown-6, and diglyme; 4,7,13,16,21,24-hexaoxa-1,10-diazabicyclo[8.8.8]hexacosane ([2.2.2] cryptand); and tris[2-(2-methoxyethoxy)ethyl]amine (TDA-1). Combinations of 1H, 13C, 15N, and 29Si NMR spectroscopies, the method of continuous variations, X-ray crystallography, and density functional theory (DFT) computations reveal ligand-modulated aggregation to give mixtures of dimers, monomers, triple ions, and ion pairs. 15N-29Si coupling constants distinguish dimers and monomers. Solvation numbers are determined by a combination of solvent titrations, observed free and bound solvent in the slow exchange limit, and DFT computations. The relative abilities of solvents to compete in binary mixtures often match that predicted by conventional wisdom but with some exceptions and evidence of both competitive and cooperative (mixed) solvation. Crystal structures of a NaHMDS cryptate ion pair and a 15-crown-5-solvated monomer are included. Results are compared with those for lithium hexamethyldisilazide, lithium diisopropylamide, and sodium diisopropylamide.

Hydrogen Bond Donor Catalyzed Cationic Polymerization of Vinyl Ethers.

The synthesis of high-molecular-weight poly(vinyl ethers) under mild conditions is a significant challenge, since cationic polymerization reactions are highly sensitive to chain-transfer and termination events. We identified a novel and highly effective hydrogen bond donor (HBD)-organic acid pair that can facilitate controlled cationic polymerization of vinyl ethers under ambient conditions with excellent monomer compatibility. Poly(vinyl ethers) of molar masses exceeding 50 kg mol-1 can be produced within 1 h without elaborate reagent purification. Modification of the HBD structure allowed tuning of the polymerization rate, while DFT calculations helped elucidate crucial intermolecular interactions between the HBD, organic acid, and polymer chain end.

Sodium Hexamethyldisilazide: Using 15N-29Si Scalar Coupling to Determine Aggregation and Solvation States.

29Si NMR spectroscopy, the method of continuous variations, and density functional theory computations show that sodium hexamethyldisilazide (NaHMDS) is a disolvated dimer in toluene, a mixture of disolvated dimer and tetrasolvated monomer in THF/toluene, and exclusively monomer in neat THF. The dioxane-solvated NaHMDS only partially deaggregates to monomer even in neat dioxane. 15N-29Si coupling constants and 29Si chemical shifts show a high and dependable correlation with the aggregation state. Monitoring either chemical shift or coupling constant versus THF concentration even in the high-temperature, rapid-exchange limit affords the solvation numbers consistent with DFT computations. The preparation of 15N-labeled NaHMDS has been improved.

Structure, Reactivity, and Synthetic Applications of Sodium Diisopropylamide.

The 60-year history of sodium diisopropylamide (NaDA) is described herein. We review various preparations, solvent-dependent stabilities, and solution structures. Synthetic applications of NaDA reported to date are framed by a mechanism-driven approach, emphasizing selectivities when appropriate. We conclude with examples beyond metalation in which NaDA plays a central role and a few thoughts on where future applications could be focused.

Enantioselective Alkylation of 2-Alkylpyridines Controlled by Organolithium Aggregation.

Direct enantioselective α-alkylation of 2-alkylpyridines provides access to chiral pyridines via an operationally simple protocol that obviates the need for prefunctionalization or preactivation of the substrate. The alkylation is accomplished using chiral lithium amides as noncovalent stereodirecting auxiliaries. Crystallographic and solution NMR studies provide insight into the structure of well-defined chiral aggregates in which a lithium amide reagent directs asymmetric alkylation.

Sodium Diisopropylamide-Mediated Dehydrohalogenations: Influence of Primary- and Secondary-Shell Solvation.

Eliminations of alkyl halides by sodium diisopropylamide (NaDA) in tetrahydrofuran (THF)/hexane or THF/N,N-dimethylethylamine (DMEA) solutions are facile and complementary to analogous reactions of lithium diisopropylamide in THF. Rate studies show a dominance of monomer-based metalations and prevalent secondary-shell solvation effects overlaid on primary-shell effects. 1-Halooctanes exclusively undergo elimination rather than substitution. Rate and isotopic labeling studies on 1-bromooctane reveal an E2-like elimination pathway via trisolvated NaDA monomer. By contrast, 1-chlorooctane is eliminated via disolvated monomer through a carbenoid mechanism. exo-2-Norbornyl chloride and bromide are also eliminated via disolvated monomer; a syn E2 mechanism is inferred for these substrates. The cis- and trans-4-tert-butylcyclohexyl bromides show a preference for the elimination of the cis isomer (kcis/ax/ktrans/eq = 10). Rate and isotopic labeling studies are consistent with a trans-diaxial E2 elimination via trisolvated monomer for the cis isomer and a carbenoid mechanism via disolvated monomer for the trans isomer. Vicinal haloethers show substrate-dependent reactivities, affording alkynes and enol ethers. trans-1-Bromo-2-methoxycyclohexane provides enol ether 1-methoxycyclohexene, while trans-1-bromo-2-methoxycyclooctane provides dimeric products consistent with fleeting cycloocta-1,2-diene (cyclic allene), which was fully characterized as two conformers.

Aryl Carbamates: Mechanisms of Orthosodiations and Snieckus-Fries Rearrangements.

Aryl carbamates are orthometalated by sodium diisopropylamide (NaDA) in tetrahydrofuran. The resulting arylsodiums undergo Snieckus-Fries rearrangement to give orthoacylated phenols in good yield. The intermediate arylsodiums and resulting orthoacylated phenolates are suggested to be monomeric. The rate-limiting step in the two-step sequence depends on the steric demands of the carbamoyl moiety and the substituents in the meta position of the arene. Rate studies reveal a dominant disolvated-monomer-based orthometalation followed by a di- or trisolvated arylsodium monomer-based rearrangement. Kinetic evidence of a NaDA-catalyzed Snieckus-Fries rearrangement suggests the intermediacy of mixed trimers. Competitive halide eliminations to form benzyne are also discussed.

Triethylborane-initiated radical chain fluorination: a synthetic method derived from mechanistic insight.

We offer a mild, metal-free sp(3) C-H fluorination alternative using Selectfluor and a substoichiometric amount of triethylborane--an established radical initiator in the presence of O2. This radical-chain-based synthetic method is particularly noteworthy as an offspring of the insight gained from a mechanistic study of copper-promoted aliphatic fluorination, constructively turning O2 from an enemy to an ally. Furthermore, BEt3/O2 is a preferred initiator in industrial processes, as it is economical, is low in toxicity, and lends way to easier workup.

Direct, catalytic monofluorination of sp³ C-H bonds: a radical-based mechanism with ionic selectivity.

Recently, our group unveiled a system in which an unusual interplay between copper(I) and Selectfluor effects mild, catalytic sp(3) C-H fluorination. Herein, we report a detailed reaction mechanism based on exhaustive EPR, (19)F NMR, UV-vis, electrochemical, kinetic, synthetic, and computational studies that, to our surprise, was revealed to be a radical chain mechanism in which copper acts as an initiator. Furthermore, we offer an explanation for the notable but curious preference for monofluorination by ascribing an ionic character to the transition state.

Iron(II)-catalyzed benzylic fluorination.

Direct C-F functionalization of benzylic sp(3) C-H bonds is a synthetic challenge that has yet to be propitiously overcome. A mild, one-pot synthesis of monofluorinated benzylic substrates is reported with commercially available iron(II) acetylacetonate and Selectfluor in good to excellent yields and selectivity. A convenient route to ß-fluorinated products of 3-aryl ketones is also highlighted, providing a synthetic equivalent to the difficult to accomplish conjugate addition of fluoride to α,ß-unsaturated ketones.