Establishment of nanoparticle screening technique: A pivotal role of sodium carboxymethylcellulose in enhancing oral bioavailability of poorly water-soluble aceclofenac.

A novel nanoparticle screening technique was established to mostly enhance the aqueous solubility and oral bioavailability of aceclofenac using nanoparticle systems. Among the polymers investigated, sodium carboxymethylcellulose (Na-CMC) showed the greatest increase in drug solubility. Utilizing spray-drying technique, the solvent-evaporated solid dispersion (SESD), surface-attached solid dispersion (SASD), and solvent-wetted solid dispersion (SWSD) were prepared using aceclofenac and Na-CMC at a weight ratio of 1:1 in 50 % ethanol, distilled water, and ethanol, respectively. Using Na-CMC as a solid carrier, an aceclofenac-loaded liquid self-emulsifying drug delivery system was spray-dried and fluid-bed granulated together with microcrystalline cellulose, producing a solid self-nanoemulsifying drug delivery system (SNEDDS) and solid self-nanoemulsifying granule system (SNEGS), respectively. Their physicochemical properties and preclinical assessments in rats were performed. All nanoparticles exhibited very different properties, including morphology, crystallinity, and size. As a result, they significantly enhanced the solubility, dissolution, and oral bioavailability in the following order: SNEDDS ≥ SNEGS > SESD ≥ SASD ≥ SWSD. Based on our screening technique, the SNEDDS was selected as the optimal nanoparticle with the highest bioavailability of aceclofenac. Thus, our nanoparticle screening technique should be an excellent guideline for solubilization research to improve the solubility and bioavailability of many poorly water-soluble bioactive materials.

Injectable dual thermoreversible hydrogel for sustained intramuscular drug delivery.

Herein, we reported novel docetaxel-decorated solid lipid nanoparticle (DCT-SLN)-loaded dual thermoreversible system (DCT-DRTS) for intramuscular administration with reduced burst effect, sustained release and improved antitumor efficacy. The optimized DCT-DRTs was subjected to in-vitro and in-vivo analyses. Antitumor evaluation of the DCT-DRTS was executed and compared with DCT-hydrogel, and DCT-suspension trailed by the histopathological and immune-histochemical analyses. The DCT-SLN gave a mean particle size of 157 nm and entrapment efficiency of 93 %. It was a solid at room temperature, and changed to liquid at physiological temperature due to its melting point of about 32 °C. Unlikely, poloxamer mixture remained liquefied at 25-27 °C, however converted to gel at physiological temperature. This behavior demonstrated opposed reversible property of the DCT-SLN and poloxamer hydrogel in DCT-DRTS system, making it ideal for intramuscular administration and quick gelation inside the body. The DCT-DRTS sustained the drugs release and unlike DCT-hydrogel, the preliminary plasma concentration of DCT-DRTS was significantly reduced, overcoming the burst release. A meaningfully enhanced antitumor efficacy and improved survival rate was observed from DCT-DRTS in tumor cell xenograft athymic nude mice. Additionally, increased apoptotic and reduced proliferation markers were observed in DCT-DRTS treated tumor masses. It was concluded that DCT-DRTS may be a suitable choice for intramuscular administration of DCT with sustained release, improved bioavailability, reduced toxicity and enhanced antitumor effects.

Comparison of two self-nanoemulsifying drug delivery systems using different solidification techniques for enhanced solubility and oral bioavailability of poorly water-soluble celecoxib.

In this study, we aimed to develop a solid self-nanoemulsifying drug delivery system (S-SNEDDS) and a solid self-nanoemulsifying granule system (S-SNEGS) to enhance the solubility and oral bioavailability of celecoxib. This process involved the preparation of a liquid SNEDDS (L-SNEDDS) and its subsequent solidification into a S-SNEDDS and a S-SNEGS. The L-SNEDDS consisted of celecoxib (drug), Captex® 355 (Captex; oil), Tween® 80 (Tween 80; surfactant) and D-α-Tocopherol polyethylene glycol 1000 succinate (TPGS; cosurfactant) in a weight ratio of 3.5:25:60:15 to produce the smallest nanoemulsion droplet size. The S-SNEDDS and S-SNEGS were prepared with L-SNEDDS/Ca-silicate/Avicel PH 101 in a weight ratio of 103.5:50:0 using a spray dryer and 103.5:50:100 using a fluid bed granulator, respectively. We compared the two novel developed systems and celecoxib powder based on their solubility, dissolution rate, physicochemical properties, flow properties and oral bioavailability in rats. S-SNEGS showed a significant improvement in solubility and dissolution rate compared to S-SNEDDS and celecoxib powder. Both systems had been converted from crystalline drug to amorphous form. Furthermore, S-SNEGS exhibited a significantly reduced angle of repose, compressibility index and Hausner ratio than S-SNEDDS, suggesting that S-SNEGS was significantly superior in flow properties. Compared to S-SNEDDS and celecoxib powder, S-SNEGS increased the oral bioavailability (AUC value) in rats by 1.3 and 4.5-fold, respectively. Therefore, S-SNEGS wolud be recommended as a solid self-nanoemulsifying system suitable for poorly water-soluble celecoxib.

Novel rivaroxaban-loaded microsphere systems with different surface microstructure for enhanced oral bioavailability.

This study compares rivaroxaban-loaded polymeric microsphere systems with three types of surface microstructure. Three types of polymeric microspheres loaded with rivaroxaban were fabricated using a spray-drying technique: solvent-evaporated, surface-attached, and solvent-wet microspheres, depending on whether the drug and additives used are soluble in the solvent. The solvent-evaporated and surface-attached microspheres had a rivaroxaban/polyvinylpyrrolidone/sodium lauryl sulfate (SLS) weight ratio of 1/0.25/2.2, and the solvent-wetted microspheres contained rivaroxaban/polyvinyl alcohol/SLS in equal weight ratio (1/0.25/2). The physicochemical properties of the microspheres were evaluated using scanning electron microscopy, powder X-ray diffraction, differential scanning calorimetry, and particle size distribution analysis. The aqueous solubility and dissolution rate of rivaroxaban in the three types of microspheres were compared to those of the drug powder. The solvent-evaporated, surface-attached, and solvent-wetted microspheres were approximately 208, 140, and 172 times as soluble as the drug powder, and the final dissolution rate (120 min) was approximately 5, 2, and 4 times that of the drug powder, respectively. In addition, the oral bioavailability increased by approximately 2, 1.3, and 1.6 times compared to that of the drug powder (area under drug concentration-time curve: 2101.3 ± 314.8, 1325.2 ± 333.3, and 1664.0 ± 102.6 h·ng/mL, respectively). Finally, the solvent-evaporated microspheres showed the greatest improvement (solvent evaporating microspheres > solvent wetted microspheres > surface-attached microspheres ≥ drug powder). Therefore, the solvent-evaporated microspheres may represent a novel oral dosage form that improves the oral bioavailability of rivaroxaban, a poorly soluble drug.

Impact of carrier hydrophilicity on solid self nano-emulsifying drug delivery system and self nano-emulsifying granule system.

The purpose of this study was to investigate the impact of carrier hydrophilicity on solid self nano-emulsifying drug delivery system (SNEDDS) and self nano-emulsifying granule system (SEGS). The mesoporous calcium silicate (Ca-silicate) and hydroxypropyl-ß-cyclodextrin (HP-ß-CD) were utilised as hydrophobic carrier and hydrophilic carrier, respectively. The liquid SNEDDS formulation, composed of Tween80/Kollipohr EL/corn oil (35/50/15%) with 31% (w/w) dexibuprofen, was spray-dried and fluid-bed granulated together with Avicel using Ca-silicate or HP- ß-CD as a solid carrier, producing four different solid SNEDDS and SEGS formulations. Unlike the Ca-silicate-based systems, spherical shape and aggregated particles were shown in HP-ß-CD-based solid SNEDDS and SEGS, respectively. Molecular interaction was detected between Ca-silicate and the drug; though, none was shown between HP-ß-CD and the drug. Each system prepared with either carrier gave no significant differences in micromeritic properties, crystallinity, droplet morphology, size, dissolution and oral bioavailability in rats. However, the HP-ß-CD-based system more significantly improved the drug solubility than did the Ca-silicate-based system. Therefore, both carriers hardly affected the properties of both solid SNEDDS and SEGS; though, there were differences in the aspect of appearance, molecular interaction and solubility.

Modulation of hair growth by topical drug delivery enhanced by STAR particles.

Topical treatments to modulate hair growth are generally limited by low drug bioavailability due to poor skin permeability. Here, we studied the use of STAR particles, which are millimeter-sized ceramic particles with protruding microneedles, to form micropores in the skin to increase skin permeability to hair growth-modulating drugs. STAR particle design and fabrication were optimized, and the resulting STAR particles were shown to reduce lag time and increase skin permeability to minoxidil and acyclovir by more than three-fold compared to no treatment in pig skin ex vivo. In rats, STAR particles also improved topical delivery of minoxidil and acyclovir, which resulted in an increase or a decrease in the number, length and/or thickness of hairs and/or the number of anagen-phase hair follicles after minoxidil or acyclovir treatment, respectively. Clinical exam and histological evaluation showed no evidence of skin irritation or other adverse effects of the treatments. We conclude that STAR particles can increase topical delivery of minoxidil and acyclovir to improve modulation of hair growth promotion and inhibition, respectively.

Enhanced Oral Bioavailability of Rivaroxaban-Loaded Microspheres by Optimizing the Polymer and Surfactant Based on Molecular Interaction Mechanisms.

This study aimed to develop microspheres using water-soluble carriers and surfactants to improve the solubility, dissolution, and oral bioavailability of rivaroxaban (RXB). RXB-loaded microspheres with optimal carrier (poly(vinylpyrrolidone) K30, PVP) and surfactant (sodium lauryl sulfate (SLS)) ratios were prepared. 1H NMR and Fourier transform infrared (FTIR) analyses showed that drug-excipient and excipient-excipient interactions affected RXB solubility, dissolution, and oral absorption. Therefore, molecular interactions between RXB, PVP, and SLS played an important role in improving RXB solubility, dissolution, and oral bioavailability. Formulations IV and VIII, containing optimized RXB/PVP/SLS ratios (1:0.25:2 and 1:1:2, w/w/w), had significantly improved solubility by approximately 160- and 86-fold, respectively, compared to RXB powder, with the final dissolution rates improved by approximately 4.5- and 3.4-fold, respectively, compared to those of RXB powder at 120 min. Moreover, the oral bioavailability of RXB was improved by 2.4- and 1.7-fold, respectively, compared to that of RXB powder. Formulation IV showed the highest improvement in oral bioavailability compared to RXB powder (AUC, 2400.8 ± 237.1 vs 1002.0 ± 82.3 h·ng/mL). Finally, the microspheres developed in this study successfully improved the solubility, dissolution rate, and bioavailability of RXB, suggesting that formulation optimization with the optimal drug-to-excipient ratio can lead to successful formulation development.

Development of guar gum-based dual-layer wound dressing containing Lactobacillus plantarum: Rapid recovery and mechanically flexibility.

This study aimed to develop a Lactobacillus plantarum (L. plantarum)-loaded dual-layer wound dressing (DLD) with excellent wound recovery and mechanical properties. L. plantarum-loaded DLD was fabricated by covering the hydrogel (inner layer) with a hydrocolloid (external layer). The hydrocolloid was manufactured by the hot-melt method, consisting of liquid paraffin, polyisobutylene, styrene-isoprene-styrene, and sodium carboxymethylcellulose (12:20:25:43, w/w/w/w). In contrast, the hydrogel was fabricated by the freeze-and-thaw method to load heat-labile L. plantarum. Various non-ionic materials have been investigated to select appropriate hydrogel components. The hydrogel composed of L. plantarum stock solution, guar gum, and polyvinyl alcohol (10:2:10, w/w/w) was chosen for its excellent swelling capacity and mechanical properties. As a result, heat-labile L. plantarum was successfully loaded into the guar-gum-based DLD. Moreover, guar gum-based DLD containing L. plantarum exhibited significantly enhanced swelling capacity and elasticity compared to single hydrogel layer (swelling capacity: DLD, 920.7 ± 32.4 % vs. hydrogel, 282.2 ± 6.5 %; elastic modulus: DLD, 2.9 ± 0.3 × 10-3 N/mm2 vs. hydrogel, 4.2. ± 0.7 × 10-3 N/mm2). The wound recovery test using Pseudomonas aeruginosa-infected animal model and histological profiles confirmed guar gum-based DLD containing L. plantarum to elicit accelerated wound recovery with complete re-epithelialization compared to commercial product and non-treated (recovery rate at Day 3: DLD, 67.8 ± 6.2 % vs. commercial product, 30.4 ± 11.7 % vs. non-treated, 14.2 ± 7.5 %). Therefore, L. plantarum-loaded DLD is an effective system for wound treatment.

Effects of Polymers on the Drug Solubility and Dissolution Enhancement of Poorly Water-Soluble Rivaroxaban.

The purpose of this study was to investigate the efficacy of hydrophilic polymers in a solid dispersion formulation in improving the solubility and dissolution rate of rivaroxaban (RXB), a poorly soluble drug. The developed solid dispersion consisted of two components, a drug and a polymer, and the drug was dispersed as amorphous particles in a polymer matrix using the spray drying method. Polymeric solid dispersions were evaluated using solubility tests, in vitro dissolution tests, powder X-ray diffraction, differential scanning calorimetry, scanning electron microscopy, and particle size distribution analysis. To maximize physical stability against crystallization and improve the solubility and dissolution of RXB, it is important to select the appropriate polymer type and the optimal ratio of the polymer to the drug. The optimized polyvinyl alcohol (PVA)-based (1/0.5, w/w) and gelatin-based (1/5, w/w) solid dispersion formulations showed 6.3 and 3.6 times higher drug solubilities than pure RXB powder, respectively, and the final dissolution rate was improved by approximately 1.5 times. Scanning electron microscopy and particle size distribution analyses confirmed that the gelatin-based solid dispersion was smaller and more spherical than the PVA-based solid dispersion, suggesting that the gelatin-based solid dispersion had a faster initial dissolution rate. Differential scanning calorimetry and powder X-ray diffraction analyses confirmed that RXB had successfully changed from a crystalline form to an amorphous form, contributing to the improvement in its solubility and dissolution rate. This study provides a strategy for selecting suitable polymers for the development of amorphous polymer solid dispersions that can overcome precipitation during dissolution and stabilization of the amorphous state. In addition, the selected polymer solid dispersion improved the drug solubility and dissolution rate of RXB, a poorly soluble drug, and may be used as a promising drug delivery system.

Influence of hydrophilic polymers on mechanical property and wound recovery of hybrid bilayer wound dressing system for delivering thermally unstable probiotic.

In this study, a novel hybrid bilayer wound dressing (HBD) has been developed for delivering a thermally unstable probiotic, Lactobacillus brevis. The HBD was composed of two layer, a hydrocolloid layer and a Lactobacillus brevis-loaded hydrogel layer as a block supporter and drug carrier, respectively. Moreover, various probiotic-loaded hydrogel layers in HBD were prepared with polyvinyl alcohol (PVA) and numerous hydrophilic polymers via a freezing and thawing method, and their mechanical property, release and wound recovery were assessed. Among the hydrophilic polymers investigated, copovidone most improved the mechanical strength, swelling ability, and release properties; and thus, copovidone/PVA (ratio of 1.0/10) was determined as an appropriate composition of hydrogel layer in HBD. The selected HBD exhibited superior stability than conventional dressing, maintaining approximately 90% of Lactobacillus brevis (9.0 × 108 CFU) during the preparation and storage process. Moreover, the HBD had about 5- and 4-fold better swelling ability and elasticity compared to the conventional dressing. Additionally, it exhibited superior recovery efficacy than the commercial dressing in the animal study. Therefore, this HBD system for delivering a thermally unstable Lactobacillus brevis would be a promising wound dressing with excellent mechanical property and wound recovery.

Novel dapagliflozin di-L-proline cocrystal-loaded tablet: preparation, physicochemical characterization, and pharmacokinetics in beagle dogs and mini-pigs.

Dapagliflozin base and a commercial dapagliflozin propanediol hydrate cocrystal (DPF-PDHC) were highly hygroscopic and thermally unstable. In this study, to address this limitation, we prepared a novel dapagliflozin di-L-proline cocrystal (DPF-LPC) and evaluated its physicochemical characterization compared with DPF-PDHC. After the preparation of the DPF-LPC-loaded tablet, its dissolution, stability and bioequivalence in beagle dogs and mini-pigs were assessed. DPF-LPC was well prepared with a dapagliflozin base and L-proline in a molar ratio of 1:2. Similar to DPF-PDHC, DPF-LPC was highly lipophilic and crystalline in nature. However, these two cocrystals exhibited different melting points and crystalline structures, indicating their different cocrystal forms. Moreover, DPF-LPC exhibited less hygroscopicity and lower water content than DPF-PDHC. The DPF-LPC-loaded tablet composed of DPF-LPC, Comprecel M102, lactose monohydrate, crospovidone, magnesium stearate, and Opadry (coating) at a weight ratio of 15.6:104.4:100.0:8.0:2.0:7.0, was dissolution-equivalent to the commercial tablet. Moreover, it provided lower impurities than the commercial tablet, indicating its better stability. In the two animals, there were no significant differences in the plasma concentrations, AUC, Cmax, and Tmax values, suggesting that they were bioequivalent. Therefore, the novel DPF-LPC-loaded tablet with excellent stability and bioequivalence may be used as a potential alternative to the commercial DPF-PDHC-loaded tablet.

Comparison of Three Different Aqueous Microenvironments for Enhancing Oral Bioavailability of Sildenafil: Solid Self-Nanoemulsifying Drug Delivery System, Amorphous Microspheres and Crystalline Microspheres.

BACKGROUND: The purpose of this study was to screen various drug delivery systems for improving the aqueous solubility and oral bioavailability of sildenafil. Three representative techniques, solid self-nanoemulsifying drug delivery systems (SNEDDS), amorphous microspheres and crystalline microspheres, were compared. METHODS: Both microspheres systems contained sildenafil:Labrasol:PVP at a weight ratio of 1:1:6. The amorphous microspheres were manufactured using ethanol, while crystalline microspheres were generated using distilled water. Liquid SNEDDS was composed of sildenafil:Labrasol:Transcutol HP:Captex 300 in the ratio of 1:70:15:15 (w:w:w:w). The solidification process in SNEDDS was performed using HDK N20 Pharma as a solid carrier. RESULTS: The amorphous microspheres appeared spherical with significantly decreased particle size compared to the drug powder. The crystalline microspheres exhibited a rough surface with no major particle-size difference compared with sildenafil powder, indicating that the hydrophilic excipients adhered to the sildenafil crystal. Solid SNEDDS presented a smooth surface, assuming that the oily liquid was adsorbed to the porous solid carrier. According to the physicochemical evaluation, the crystalline state maintained in crystalline microspheres, whereas the crystal state changed to amorphous state in other formulations. Amorphous microspheres, crystalline microspheres and solid SNEDDS produced about 79, 55, 82-fold increased solubility, compared to drug powder. Moreover, the prepared formulations provided a higher dissolution rate (%) and plasma concentration than did the drug powder (performance order; solid SNEDDS ≥ amorphous microspheres ≥ crystalline microspheres > drug powder). Among the formulations, solid SNEDDS demonstrated the highest improvement in oral bioavailability (AUC; 1508.78 ± 343.95 h·ng/mL). CONCLUSION: Therefore, solid SNEDDS could be recommended as an oral dosage form for enhancing the oral bioavailability of sildenafil.

New potential application of hydroxypropyl-ß-cyclodextrin in solid self-nanoemulsifying drug delivery system and solid dispersion.

The purpose of this study was to use hydroxypropyl-ß-cyclodextrin (HP-ß-CD) as a novel carrier in solid SNEDDS and solid dispersions to enhance the solubility and oral bioavailability of poorly water-soluble dexibuprofen. The novel dexibuprofen-loaded solid SNEDDS was composed of dexibuprofen, corn oil, polysorbate 80, Cremophor® EL, and HP-ß-CD at a weight ratio of 45/35/50/15/100. This solid SNEDDS spontaneously formed a nano-emulsion with a size of approximately 120 nm. Unlike the conventional solid SNEDDS prepared with colloidal silica as a carrier, this dexibuprofen-loaded solid SNEDDS exhibited a spherical structure. Similar to the dexibuprofen-loaded solid dispersion prepared with HP-ß-CD, the transformation of the crystalline drug to an amorphous state with no molecular interactions were observed in the solid SNEDDS. Compared to the solid dispersion and dexibuprofen powder, solid SNEDDS significantly enhanced drug solubility and AUC. Therefore, HP-ß-CD is a novel potential carrier in SNEDDS for improving the oral bioavailability of dexibuprofen.

Effects of different physicochemical characteristics and supersaturation principle of solidified SNEDDS and surface-modified microspheres on the bioavailability of carvedilol.

In this study, a solidified self-nanoemulsifying drug delivery system (solidified SNEDDS) and surface-modified microspheres were developed for enhancing the oral bioavailability of carvedilol. Based on the aqueous solubility test, liquid SNEDDS was composed of Peceol™ (oil), Tween® 80 (surfactant), and Labrasol® (co-surfactant) at a weight ratio of 25/50/25, generating the smallest nanoemulsion droplet size. Then, carvedilol was added to liquid SNEDDS and spray-dried with Aerosil® to fabricate the solidified SNEDDS. Surface-modified microspheres were manufactured using copovidone (polymer) and Tween® 80 (surfactant) according to aqueous solubility test results. The proper ratio of copovidone and Tween® 80 was determined based on the solubility and dissolution test. Both prepared formulations and carvedilol powder were compared using four different criteria: physicochemical characteristics, solubility, dissolution, and oral bioavailability. For solidified SNEDDS, carvedilol was encapsulated in liquid SNEDDS and absorbed to the Aerosil® surface, leading to the conversion from a crystalline to an amorphous state. However, the drug maintained its crystal form in the surface-modified microspheres. Round and even-sized particles were attached to the rough surfaces of drug, suggesting that hydrophilic carriers adhered to the hydrophobic drug. All formulations significantly improved drug solubility, dissolution, plasma concentrations, Cmax, and AUC compared to carvedilol powder. The parameters were ranked in the following order: solidified SNEDDS > surface-modified microspheres > carvedilol powder. As a result, different solubility-increasing mechanisms provided differences in performance. For carvedilol, the formation of a nano-emulsion in solidified SNEDDS resulted in an efficient supersaturated state, leading to improved solubility (~6.1 fold), dissolution (~1.8 fold), and oral bioavailability (~1.4 fold) that was superior to the hydrophilic microenvironment in surface-modified microspheres.

Comparative study between high-pressure homogenisation and Shirasu porous glass membrane technique in sildenafil base-loaded solid SNEDDS: Effects on physicochemical properties and in vivo characteristics.

The purpose of this study was to compare two types of emulsification techniques in a solid self-nanoemulsifying drug delivery system (SNEDDS); high-pressure homogenisation (HPH) and Shirasu porous glass membrane (SPG). Those two emulsification processes enhanced the solubility, dissolution and oral bioavailability of poorly water-soluble sildenafil base (SB) by producing fine and well-dispersed nanoemulsion droplet. The liquid SNEDDS consisting of Labrasol/Transcutol HP/coconut oil at the weight of 72/18/10, gave the smallest emulsion droplet size among the prepared liquid SNEDDS formulations. Then, the SB-loaded liquid SNEDDS was dissolved in the deionised water and applied to HPH or SPG techniques. Aerosil 200 was suspended as a mesoporous carrier and spray-dried, producing an SB-loaded solid SNEDDS. The emulsion droplet size, solubility and dissolution of each emulsification process were compared to the solid SNEDDS fabricated without any treatment of additional emulsification. Moreover, the physicochemical properties of all formulations were compared. The crystalline state of the drug in all products was converted to the amorphous state. The solid SNEDDS, subjected to HPH technique, provided fine and well-dispersed nanoemulsion. Additionally, it increasingly improved the drug solubility and dissolution as compared to the others, including SB powder, non-treated (NT) and SPG. Furthermore, it gave improved Cmax and increased AUC compared to SB powder and SPG, indicating HPH enhanced the oral bioavailability of SB the most. Thus, this solid SNEDDS with HPH would be strongly suggested as an oral SB-loaded pharmaceutical product.