RESUMEN
Recent advances in bone tissue engineering have shown promise for bone repair post osteosarcoma excision. However, conflicting research on mesenchymal stem cells (MSCs) has raised concerns about their potential to either promote or inhibit tumor cell proliferation. It is necessary to thoroughly understand the interactions between MSCs and tumor cells. Most previous studies only focused on the interactions between cells within the tumor tissues. It has been challenging to develop an in vitro model of osteosarcoma excision sites replicating the complexity of the bone microenvironment and cell distribution. In this work, we designed and fabricated modular bioceramic scaffolds to assemble into a co-culture model. Because of the bone-like composition and mechanical property, tricalcium phosphate bioceramic could mimic the bone microenvironment and recapitulate the cell-extracellular matrix interaction. Moreover, the properties for easy assembly enabled the modular units to mimic the spatial distribution of cells in the osteosarcoma excision site. Under this co-culture model, MSCs showed a noticeable tumor-stimulating effect with a potential risk of tumor recurrence. In addition, tumor cells also could inhibit the osteogenic ability of MSCs. To undermine the stimulating effects of MSCs on tumor cells, we present the methods of pre-differentiated MSCs, which had lower expression of IL-8 and higher expression of osteogenic proteins. Both in vitro and in vivo studies confirm that pre-differentiated MSCs could maintain high osteogenic capacity without promoting tumor growth, offering a promising approach for MSCs' application in bone regeneration. Overall, 3D modular scaffolds provide a valuable tool for constructing hard tissue in vitro models. STATEMENT OF SIGNIFICANCE: Bone tissue engineering using mesenchymal stem cells (MSCs) and biomaterials has shown promise for bone repair post osteosarcoma excision. However, conflicting researches on MSCs have raised concerns about their potential to either promote or inhibit tumor cell proliferation. It remains challenges to develop in vitro models to investigate cell interactions, especially of osteosarcoma with high hardness and special composition of bone tissue. In this work, modular bioceramic scaffolds were fabricated and assembled to co-culture models. The interactions between MSCs and MG-63 were manifested as tumor-stimulating and osteogenesis-inhibiting, which means potential risk of tumor recurrence. To undermine the stimulating effect, pre-differentiation method was proposed to maintain high osteogenic capacity without tumor-stimulating, offering a promising approach for MSCs' application in bone regeneration.
Asunto(s)
Cerámica , Técnicas de Cocultivo , Células Madre Mesenquimatosas , Osteosarcoma , Andamios del Tejido , Osteosarcoma/patología , Osteosarcoma/metabolismo , Células Madre Mesenquimatosas/metabolismo , Células Madre Mesenquimatosas/citología , Andamios del Tejido/química , Humanos , Cerámica/farmacología , Cerámica/química , Línea Celular Tumoral , Fosfatos de Calcio/química , Fosfatos de Calcio/farmacología , Animales , Osteogénesis/efectos de los fármacos , Neoplasias Óseas/patología , Neoplasias Óseas/metabolismo , Proliferación Celular/efectos de los fármacos , Diferenciación Celular/efectos de los fármacosRESUMEN
Osteochondral regeneration involves the highly challenging and complex reconstruction of cartilage and subchondral bone. Silicon (Si) ions play a crucial role in bone development. Current research on Si ions mainly focuses on bone repair, by using silicate bioceramics with complex ion compositions. However, it is unclear whether the Si ions have important effect on cartilage regeneration. Developing a scaffold that solely releases Si ions to simultaneously promote subchondral bone repair and stimulate cartilage regeneration is critically important. Diatomite (DE) is a natural diatomaceous sediment that can stably release Si ions, known for its abundant availability, low cost, and environmental friendliness. Herein, a hierarchical osteochondral repair scaffold is uniquely designed by incorporating gradient DE into GelMA hydrogel. The adding DE microparticles provides a specific Si source for controlled Si ions release, which not only promotes osteogenic differentiation of rBMSCs (rabbit bone marrow mesenchymal stem cells) but also enhances proliferation and maturation of chondrocytes. Moreover, DE-incorporated hierarchical scaffolds significantly promoted the regeneration of cartilage and subchondral bone. The study suggests the significant role of Si ions in promoting cartilage regeneration and solidifies their foundational role in enhancing bone repair. Furthermore, it offers an economic and eco-friendly strategy for developing high value-added osteochondral regenerative bioscaffolds from low-value ocean natural materials.
RESUMEN
Organoids, which are 3D multicellular constructs, have garnered significant attention in recent years. Existing organoid culture methods predominantly utilize natural and synthetic polymeric hydrogels. This study explored the potential of a composite hydrogel mainly consisting of calcium silicate (CS) nanowires and methacrylated gelatin (GelMA) as a substrate for organoid formation and functionalization, specifically for intestinal and liver organoids. Furthermore, the research delved into the mechanisms by which CS nanowires promote the structure formation and development of organoids. It was discovered that CS nanowires can influence the stiffness of the hydrogel, thereby regulating the expression of the mechanosensory factor yes-associated protein (YAP). Additionally, the bioactive ions released by CS nanowires in the culture medium could accelerate Wnt/ß-catenin signaling, further stimulating organoid development. Moreover, bioactive ions were found to enhance the nutrient absorption and ATP metabolic activity of intestinal organoids. Overall, the CS/GelMA composite hydrogel proves to be a promising substrate for organoid formation and development. This research suggested that inorganic biomaterials hold significant potential in organoid research, offering bioactivities, biosafety, and cost-effectiveness.
Asunto(s)
Compuestos de Calcio , Hidrogeles , Nanocables , Organoides , Silicatos , Silicatos/farmacología , Silicatos/química , Organoides/efectos de los fármacos , Organoides/metabolismo , Compuestos de Calcio/farmacología , Compuestos de Calcio/química , Hidrogeles/farmacología , Nanocables/química , Animales , Humanos , Materiales Biocompatibles/farmacología , Ratones , Gelatina/química , Hígado/metabolismo , Vía de Señalización Wnt/efectos de los fármacos , Vía de Señalización Wnt/fisiología , Intestinos/citología , Intestinos/efectos de los fármacosRESUMEN
Limited motor activity due to the loss of natural structure impedes recovery in patients suffering from tendon-to-bone injury. Conventional biomaterials focus on strengthening the regenerative ability of tendons/bones to restore natural structure. However, owing to ignoring the immune environment and lack of multi-tissue regenerative function, satisfactory outcomes remain elusive. Here, combined manganese silicate (MS) nanoparticles with tendon/bone-related cells, the immunomodulatory multicellular scaffolds were fabricated for integrated regeneration of tendon-to-bone. Notably, by integrating biomimetic cellular distribution and MS nanoparticles, the multicellular scaffolds exhibited diverse bioactivities. Moreover, MS nanoparticles enhanced the specific differentiation of multicellular scaffolds via regulating macrophages, which was mainly attributed to the secretion of PGE2 in macrophages induced by Mn ions. Furthermore, three animal results indicated that the scaffolds achieved immunomodulation, integrated regeneration, and function recovery at tendon-to-bone interfaces. Thus, the multicellular scaffolds based on inorganic biomaterials offer an innovative concept for immunomodulation and integrated regeneration of soft/hard tissue interfaces.
Asunto(s)
Ingeniería de Tejidos , Andamios del Tejido , Animales , Humanos , Andamios del Tejido/química , Ingeniería de Tejidos/métodos , Tendones/fisiología , Materiales Biocompatibles , Regeneración ÓseaRESUMEN
The behavior of tissue resident cells can be influenced by the spatial arrangement of cellular interactions. Therefore, it is of significance to precisely control the spatial organization of various cells within multicellular constructs. It remains challenging to construct a versatile multicellular scaffold with ordered spatial organization of multiple cell types. Herein, a modular multicellular tissue engineering scaffold with ordered spatial distribution of different cell types is constructed by assembling varying cell-laden modules. Interestingly, the modular scaffolds can be disassembled into individual modules to evaluate the specific contribution of each cell type in the system. Through assembling cell-laden modules, the macrophage-mesenchymal stem cell (MSC), endothelial cell-MSC, and chondrocyte-MSC co-culture models are successfully established. The in vitro results indicate that the intercellular cross-talk can promote the proliferation and differentiation of each cell type in the system. Moreover, MSCs in the modular scaffolds may regulate the behavior of chondrocytes through the nuclear factor of activated T-Cells (NFAT) signaling pathway. Furthermore, the modular scaffolds loaded with co-cultured chondrocyte-MSC exhibit enhanced regeneration ability of osteochondral tissue, compared with other groups. Overall, this work offers a promising strategy to construct a multicellular tissue engineering scaffold for the systematic investigation of intercellular cross-talk and complex tissue engineering.
Asunto(s)
Diferenciación Celular , Condrocitos , Técnicas de Cocultivo , Células Madre Mesenquimatosas , Ingeniería de Tejidos , Andamios del Tejido , Ingeniería de Tejidos/métodos , Andamios del Tejido/química , Células Madre Mesenquimatosas/citología , Células Madre Mesenquimatosas/metabolismo , Condrocitos/citología , Condrocitos/metabolismo , Animales , Ratones , Proliferación Celular , Humanos , Factores de Transcripción NFATC/metabolismo , Macrófagos/citología , Macrófagos/metabolismo , Células RAW 264.7 , Transducción de SeñalRESUMEN
Tissue regeneration is a complicated process that relies on the coordinated effort of the nervous, vascular and immune systems. While the nervous system plays a crucial role in tissue regeneration, current tissue engineering approaches mainly focus on restoring the function of injury-related cells, neglecting the guidance provided by nerves. This has led to unsatisfactory therapeutic outcomes. Herein, we propose a new generation of engineered neural constructs from the perspective of neural induction, which offers a versatile platform for promoting multiple tissue regeneration. Specifically, neural constructs consist of inorganic biomaterials and neural stem cells (NSCs), where the inorganic biomaterials endows NSCs with enhanced biological activities including proliferation and neural differentiation. Through animal experiments, we show the effectiveness of neural constructs in repairing central nervous system injuries with function recovery. More importantly, neural constructs also stimulate osteogenesis, angiogenesis and neuromuscular junction formation, thus promoting the regeneration of bone and skeletal muscle, exhibiting its versatile therapeutic performance. These findings suggest that the inorganic-biomaterial/NSC-based neural platform represents a promising avenue for inducing the regeneration and function recovery of varying tissues and organs.
RESUMEN
Hemorrhage and infection after emergency trauma are two main factors that cause deaths. It is of great importance to instantly stop bleeding and proceed with antibacterial treatment for saving lives. However, there is still a huge need and challenge to develop materials with functions of both rapid hemostasis and effective antibacterial therapy. Herein, we propose the fabrication of a composite aerogel mainly consisting of mesoporous bioactive glass (MBG) and graphene oxide (GO) through freeze-drying. This composite aerogel has a three-dimensional porous structure, high absorption, good hydrophilicity, and negative zeta potential. Moreover, it exhibits satisfactory hemostatic activities including low BCI, good hemocompatibility, and activation of intrinsic pathways. When applied to rat liver injury bleeding, it can decrease 60% hemostasis time and 75% blood loss amount compared to medical gauze. On the other hand, the composite aerogel shows excellent photothermal antibacterial capacity against Staphylococcus aureus and Escherichia coli. Animal experiments further verify that this composite aerogel can effectively kill bacteria in wound sites via photothermal treatment and promote wound healing. Hence, this MBG-GO composite aerogel makes a great choice for the therapy of emergency trauma with massive hemorrhage and bacterial infection.
Asunto(s)
Grafito , Hemostáticos , Ratas , Animales , Hemostáticos/farmacología , Hemostáticos/uso terapéutico , Hemostasis , Antibacterianos/farmacología , Antibacterianos/uso terapéutico , Antibacterianos/química , HemorragiaRESUMEN
Natural materials and bioprocesses provide abundant inspirations for the design and synthesis of high-performance nanomaterials. In the past several decades, bioinspired nanomaterials have shown great potential in the application of biomedical fields, such as tissue engineering, drug delivery, and cancer therapy, and so on. In this review, three types of bioinspired strategies for biomedical nanomaterials, that is, inspired by the natural structures, biomolecules, and bioprocesses, are mainly introduced. We summarize and discuss the design concepts and synthesis approaches of various bioinspired nanomaterials along with their specific roles in biomedical applications. Additionally, we discuss the challenges for the development of bioinspired biomedical nanomaterials, such as mechanical failure in wet environment, limitation in scale-up fabrication, and lack of deep understanding of biological properties. It is expected that the development and clinical translation of bioinspired biomedical nanomaterials will be further promoted under the cooperation of interdisciplinary subjects in future. This article is categorized under: Implantable Materials and Surgical Technologies > Nanomaterials and Implants Therapeutic Approaches and Drug Discovery > Emerging Technologies.
Asunto(s)
Nanoestructuras , Humanos , Nanoestructuras/química , Sistemas de Liberación de Medicamentos , Ingeniería de TejidosRESUMEN
Diabetic wound is one of the chronic wounds that is difficult to heal, and effective treatment of it still confronts a great challenge. Monitoring the variation of diabetic wound microenvironment (such as hydrogen peroxide (H2 O2 )) can understand the wound state and guide the wound management. Herein, a multifunctional hydrogel with the abilities of monitoring the H2 O2 concentration, alleviating oxidative stress and promoting wound healing is developed, which is prepared by encapsulating manganese-containing bioactive glass (MnBG) and CePO4 :Tb in biocompatible gelatin methacryloyl (GelMA) hydrogel (CPT-MnBG-Gel). On the one hand, the H2 O2 -dependent fluorescence quenching effect of the CePO4 :Tb contributes to visible monitoring of the H2 O2 concentration of wounds via smartphone imaging, and the CPT-MnBG-Gel hydrogel can effectively monitor the H2 O2 level of 10.35-200 µmol L-1 . On the other hand, MnBG can alleviate oxidative stress and promote the proliferation, migration and differentiation of fibroblasts and endothelial cells in vitro owing to the bioactive Mn and Si ions, and in vivo evaluation also demonstrates that the CPT-MnBG-Gel hydrogels can effectively accelerate wound healing. Hence, such multifunctional hydrogel is promising for diabetic wound management and accelerating wound healing.
Asunto(s)
Diabetes Mellitus , Hidrogeles , Hidrogeles/farmacología , Células Endoteliales , Diferenciación Celular , Fibroblastos , Cicatrización de Heridas , AntibacterianosRESUMEN
Silicon (Si)-based biomaterials are widely applied for bone regeneration. However, the underlying mechanisms of the materials function remain largely unknown. T lymphocyte-mediated adaptive immune response plays a vital role in the process of bone regeneration. In the current study, mesoporous silica (MS) is used as a model material of Si-based biomaterials. It shows that the supernatant of CD4+ T lymphocytes pretreated with MS extract significantly promotes the vascularized bone regeneration. The potential mechanism is closely related to the fact that MS extract can reduce the expression of regulatory factor X-1 (RFX-1) in CD4+ T lymphocytes. This may result in the overexpression of interleukin-17A (IL-17A) by boosting histone H3 acetylation and lowering DNA methylation and H3K9 trimethylation. Importantly, the in vivo experiments further reveal that MS particles significantly enhance bone regeneration with improved angiogenesis in the critical-sized calvarial defect mouse model accompanied by upregulation of IL-17A in peripheral blood and the proportion of Th17 cells. This study suggests that modulation of the adaptive immune response of T lymphocytes by silicate-based biomaterials plays an important role for bone regeneration.
Asunto(s)
Osteogénesis , Silicio , Ratones , Animales , Silicio/farmacología , Materiales Biocompatibles/farmacología , Interleucina-17 , Epigénesis Genética , Angiogénesis , Linfocitos T , Regeneración Ósea , Dióxido de Silicio/farmacología , Inmunidad AdaptativaRESUMEN
The use of biomaterials in regenerative medicine has expanded to treat various disorders caused by trauma or disease in orthopedics and dentistry. However, the treatment of large and complex bone defects presents a challenge, leading to a pressing need for optimized biomaterials for bone repair. Recent advances in chemical sciences have enabled the incorporation of therapeutic ions into bone grafts to enhance their performance. These ions, such as strontium (for bone regeneration/osteoporosis), copper (for angiogenesis), boron (for bone growth), iron (for chemotaxis), cobalt (for B12 synthesis), lithium (for osteogenesis/cementogenesis), silver (for antibacterial resistance), and magnesium (for bone and cartilage regeneration), among others (e.g., zinc, sodium, and silica), have been studied extensively. This review aims to provide a comprehensive overview of current knowledge and recent developments in ion incorporation into biomaterials for bone and periodontal tissue repair. It also discusses recently developed biomaterials from a basic design and clinical application perspective. Additionally, the review highlights the importance of precise ion introduction into biomaterials to address existing limitations and challenges in combination therapies. Future prospects and opportunities for the development and optimization of biomaterials for bone tissue engineering are emphasized.
RESUMEN
The emergence of nanosheet materials like graphene and phosphorene, which are created by breaking the interlayer van der Waals force, has revolutionized multiple fields. Layered inorganic materials are ubiquitous in materials like bioceramics, semiconductors, superconductors, etc. However, the strong interlayer covalent or ionic bonding in these crystals makes it difficult to fabricate nanosheets from them. In this study, we present a simple technique to produce nanosheets from layered crystals by selectively exfoliating their interlayer metal atoms using the metal-chelation reaction. As a proof of concept, we successfully produced bioceramic nanosheets (BCene) by extracting Ca layers from Akermanite (AKT). The 3D-printed BCene scaffolds exhibited superior mechanical strength and in vitro bioactivity compared to the scaffolds made from AKT nanopowders. Our findings demonstrate the outstanding potential of BCene nanosheets in tissue engineering. Additionally, the selective demetallization technique for nanosheet production could be applied to other inorganic layered crystals to optimize their performance.
RESUMEN
Neural-vascular networks are densely distributed through periosteum, cortical bone, and cancellous bone, which is of great significance for bone regeneration and remodeling. Although significant progress has been made in bone tissue engineering, ineffective bone regeneration, and delayed osteointegration still remains an issue due to the ignorance of intrabony nerves and blood vessels. Herein, inspired by space-filling polyhedra with open architectures, polyhedron-like scaffolds with spatial topologies are prepared via 3D-printing technology to mimic the meshwork structure of cancellous bone. Benefiting from its spatial topologies, polyhedron-like scaffolds greatly promoted the osteogenic differentiation of bone mesenchymal stem cells (BMSCs) via activating PI3K-Akt signals, and exhibiting satisfactory performance on angiogenesis and neurogenesis. Computational fluid dynamic (CFD) simulation elucidates that polyhedron-like scaffolds have a relatively lower area-weighted average static pressure, which is beneficial to osteogenesis. Furthermore, in vivo experiments further demonstrate that polyhedron-like scaffolds obviously promote bone formation and osteointegration, as well as inducing vascularization and ingrowth of nerves, leading to innervated and vascularized bone regeneration. Taken together, this work offers a promising approach for fabricating multifunctional scaffolds without additional exogenous seeding cells and growth factors, which holds great potential for functional tissue regeneration and further clinical translation.
Asunto(s)
Materiales Biocompatibles , Osteogénesis , Materiales Biocompatibles/química , Osteogénesis/fisiología , Andamios del Tejido/química , Fosfatidilinositol 3-Quinasas , Regeneración Ósea , Ingeniería de Tejidos , Diferenciación Celular , Impresión TridimensionalRESUMEN
Considering the challenge in the treatment of severe breast tumor patients, xonotlite nanowire-containing bioactive scaffolds (Fe3O4-CS-GelMA) were fabricated by the 3D-printing technique for the therapy of injured adipose tissue after surgery. Importantly, benefiting from the excellent magnetothermal performance of Fe3O4 microspheres, Fe3O4-CS-GelMA scaffolds could effectively kill tumor cells in vitro and suppress breast cancer in vivo under an alternating magnetic field, and the tumor did not recur in 2 weeks. In addition, attributed to the released bioactive inorganic ions, Fe3O4-CS-GelMA composite scaffolds could effectively promote the expression of adipogenesis-related genes and proteins of adipose-derived stem cells (ADSCs) via the PI3K-AKT signaling pathway in vitro. Furthermore, Fe3O4-CS-GelMA scaffolds with ADSCs could obviously stimulate the formation of adipose in vivo, compared with that of pure GelMA without inorganic components. Therefore, this study offers a promising strategy for the therapy of breast tumors after the surgical excision of breast carcinoma.
Asunto(s)
Neoplasias de la Mama , Nanocables , Humanos , Femenino , Andamios del Tejido , Osteogénesis , Diferenciación Celular , Neoplasias de la Mama/tratamiento farmacológico , Fosfatidilinositol 3-Quinasas , Nanocables/uso terapéutico , Impresión Tridimensional , Tejido Adiposo , Ingeniería de Tejidos/métodosRESUMEN
Hair loss caused by the abnormal functions of hair follicles in skin can seriously impact the quality of an individual's life. The development of sophisticated skin tissue-engineered constructs is required to enable the function recovery of hair follicles. However, effective hair regrowth in skin substitutes still remains a great challenge. In this study, a 3D multicellular micropattern was successfully fabricated by arranging the hair follicle-related cells orderly distributed in the interval of vascular-cell networks via bioprinting technology. By combining the stable biomimetic micropattern structure and the bio-inducing substrate incorporated with magnesium silicate (MS) nanomaterials, the 3D multicellular micropattern possessed significant follicular potential and angiogenic capacity in vitro. Furthermore, the 3D multicellular micropattern with MS incorporation contributed to efficient hair regrowth during skin tissue regeneration in both immunodeficient mice and androgenetic alopecia (AGA) mice models. Thus, this study proposes a novel 3D micropatterned multicellular system assembling a biomimetic micro-structure and modulating the cell-cell interaction for hair regeneration during skin reconstruction.
Asunto(s)
Materiales Biocompatibles , Cabello , Ratones , Animales , Materiales Biocompatibles/metabolismo , Folículo Piloso/metabolismo , Piel/metabolismo , Alopecia/metabolismoRESUMEN
Neurovascular networks play significant roles in the metabolism and regeneration of many tissues and organs in the human body. Blood vessels can transport sufficient oxygen, nutrients, and biological factors, while nerve fibers transmit excitation signals to targeted cells. However, traditional scaffolds cannot satisfy the requirement of stimulating angiogenesis and innervation in a timely manner due to the complexity of host neurovascular networks. Three-dimensional (3D) printing, as a versatile and favorable technique, provides an effective approach to fabricating biological scaffolds with biomimetic architectures and multimaterial compositions, which are capable of regulating multiple cell behaviors. This review paper presents a summary of the current progress in 3D-printed biomaterials for vascularized and innervated tissue regeneration by presenting skin, bone, and skeletal muscle tissues as an example. In addition, we highlight the crucial roles of blood vessels and nerve fibers in the process of tissue regeneration and discuss the future perspectives for engineering novel biomaterials. It is expected that 3D-printed biomaterials with angiogenesis and innervation properties can not only recapitulate the physiological microenvironment of damaged tissues but also rapidly integrate with host neurovascular networks, resulting in accelerated functional tissue regeneration.
RESUMEN
Recent advancements in tissue engineering have demonstrated a great potential for the fabrication of three-dimensional (3D) tissue structures such as cartilage and bone. However, achieving structural integrity between different tissues and fabricating tissue interfaces are still great challenges. In this study, anin situcrosslinked hybrid, multi-material 3D bioprinting approach was used for the fabrication of hydrogel structures based on an aspiration-extrusion microcapillary method. Different cell-laden hydrogels were aspirated in the same microcapillary glass and deposited in the desired geometrical and volumetric arrangement directly from a computer model. Alginate and carboxymethyl cellulose were modified with tyramine to enhance cell bioactivity and mechanical properties of human bone marrow mesenchymal stem cells-laden bioinks. Hydrogels were prepared for extrusion by gelling in microcapillary glass utilizing anin situcrosslink approach with ruthenium (Ru) and sodium persulfate photo-initiating mechanisms under visible light. The developed bioinks were then bioprinted in precise gradient composition for cartilage-bone tissue interface using microcapillary bioprinting technique. The biofabricated constructs were co-cultured in chondrogenic/osteogenic culture media for three weeks. After cell viability and morphology evaluations of the bioprinted structures, biochemical and histological analyses, and a gene expression analysis for the bioprinted structure were carried out. Analysis of cartilage and bone formation based on cell alignment and histological evaluation indicated that mechanical cues in conjunction with chemical cues successfully induced MSC differentiation into chondrogenic and osteogenic tissues with a controlled interface.
Asunto(s)
Bioimpresión , Hidrogeles , Humanos , Hidrogeles/química , Bioimpresión/métodos , Cartílago , Ingeniería de Tejidos/métodos , Andamios del Tejido/química , Luz , Impresión TridimensionalRESUMEN
Tissue engineering strategy that combine biomaterials with living cells has shown special advantages in tissue regeneration and promoted the development of regenerative medicine. In particular, the rising of 3D printing technology further enriched the structural design and composition of tissue engineering scaffolds, which also provided convenience for cell loading and cell delivery of living cells. In this review, two types of cell-delivery scaffolds for tissue regeneration, including 3D printed scaffolds with subsequent cell-seeding and 3D cells bioprinted scaffolds, are mainly reviewed. We devote a major part to present and discuss the recent advances of two 3D printed cell-delivery scaffolds in regeneration of various tissues, involving bone, cartilage, skin tissues etc. Although two types of 3D printed cell-delivery scaffolds have some shortcomings, they do have generally facilitated the exploration of tissue engineering scaffolds in multiple tissue regeneration. It is expected that 3D printed cell-delivery scaffolds will be further explored in function mechanism of seeding cells in vivo, precise mimicking of complex tissues and even organ reconstruction under the cooperation of multiple fields in future.
RESUMEN
Tendon-to-bone interface has a hierarchical structure and gradient component that are conducive to distributing the stresses to achieve movement. Conventional biomaterials lack the capacity to induce synchronous repair of multiple tissues, resulting in the failure of the interface repair. Biomimetic strategies have attracted enormous attention in the field of complex structure regeneration because they can meet the different physiological requirements of multiple tissues. Herein, a biomimetic ink mimicking tendon/bone tissues is developed by combining tendon/bone-related cells and Mo-containing silicate (MS) bioceramics. Subsequently, biomimetic multicellular scaffolds are fabricated to achieve the simulation of the hierarchical structure and cellular composition of tendon-to-bone interfaces by the spatial distribution of the biomimetic inks via 3D bioprinting, which is of great significance for inducing the regeneration of complex structures in the interface region. In addition, attributed to the desirable ionic microenvironment created by MS bioceramics, the biomimetic scaffolds possess the dual function of inducing tendon/bone-related cells tenogenic and osteogenic differentiation in vitro, and promote the integrated regeneration of tendon-to-bone interfaces in vivo. The study offers a feasible strategy to construct biomimetic multicellular scaffolds with bifunction for inducing multi-lineage tissue regeneration, especially for regenerating soft-to-hard tissue interfaces.
Asunto(s)
Bioimpresión , Andamios del Tejido , Andamios del Tejido/química , Ingeniería de Tejidos/métodos , Osteogénesis , Tinta , Biomimética , Regeneración Ósea , TendonesRESUMEN
It is a large clinical challenge to repair critical-size bone defects, and vascularization in the early stage is of vital importance in bone regeneration. In recent years, 3D-printed bioceramic is a kind of common bioactive scaffold for repairing bone defects. However, conventional 3D-printed bioceramic scaffolds consist of stacked solid struts with low porosity, which limits the ability of angiogenesis and bone regeneration. The hollow tube structure can induce endothelial cells to build the vascular system. In this study,ß-tricalcium phosphate (ß-TCP) bioceramic scaffolds containing the hollow tube structure were prepared with digital light processing-based 3D printing strategy. The physicochemical properties and osteogenic activities of prepared scaffolds could be precisely controlled by adjusting the parameters of hollow tubes. Compared with solid bioceramic scaffolds, such scaffolds could significantly improve the proliferation and attachment activity of rabbit bone mesenchymal stem cellsin vitro, and facilitate early angiogenesis and subsequent osteogenesisin vivo. Therefore,ß-TCP bioceramic scaffolds with the hollow tube structure possess great potential application for the treatment of critical-size bone defects.