RESUMEN
Single-atom catalysts (SACs) are considered prominent materials in the field of catalysis due to their high metal atom utilization and selectivity. However, the wide-ranging applications of SACs remain a significant challenge due to their complex preparation processes. Here, a universal strategy is reported to prepare a series of noble metal single atoms on different non-noble metal oxides through a facile one-step thermal decomposition of molten salts. By using a mixture of non-noble metal nitrate and a small-amount noble metal chloride as the precursor, noble metal single atoms can be easily introduced into the non-noble metal oxide lattice owing to the cation exchange in the in situ formed molten salt, followed by the thermal decomposition of nitrate anions during the heating process. Analyses using aberration-corrected high-angle annular dark-field scanning transmission electron microscopy and extended X-ray absorption fine structure spectroscopy confirm the formation of the finely dispersed single atoms. Specially, the as-synthesized Ir single atoms (10.97 wt%) and Pt single atoms (4.60 wt%) on the Co3O4 support demonstrate outstanding electrocatalytic activities for oxygen evolution reaction and hydrogen evolution reaction, respectively.
RESUMEN
Considering that CO2 reduction is mostly a multielectron reaction, it is necessary for the photocatalysts to integrate multiple catalytic sites and cooperate synergistically to achieve efficient photocatalytic CO2 reduction to various products, such as C2 hydrocarbons. Herein, through crystal engineering, we designed and constructed a metal-organic framework-derived Zr/Ti bimetallic oxide solid solution support, which was confirmed by X-ray diffraction, electron microscopy and X-ray absorption spectroscopy. After anchoring Au nanoparticles, the composite photocatalyst exhibited excellent performances toward photocatalytic CO2 reduction to syngas (H2 and CO production rates of 271.6 and 260.6â µmol g-1 h-1) and even C2 hydrocarbons (C2H4 and C2H6 production rates of 6.80 and 4.05â µmol g-1 h-1). According to the control experiments and theoretical calculations, the strong interaction between bimetallic oxide solid solution support and Au nanoparticles was found to be beneficial for binding intermediates and reducing CO2 reduction, highlighting the synergy effect of the catalytic system with multiple active sites.
RESUMEN
The development of solid-state sodium-ion batteries (SSSBs) heavily hinges on the development of an superionic Na+ conductor (SSC) that features high conductivity, (electro)chemical stability, and deformability. The construction of heterogeneous structures offers a promising approach to comprehensively enhancing these properties in a way that differs from traditional structural optimization. Here, this work exploits the structural variance between high- and low-coordination halide frameworks to develop a new class of halide heterogeneous structure electrolytes (HSEs). The halide HSEs incorporating a UCl3 -type high-coordination framework and amorphous low-coordination phase achieves the highest Na+ conductivity (2.7 mS cm-1 at room temperature, RT) among halide SSCs so far. By discerning the individual contribution of the crystalline bulk, amorphous region, and interface, this work unravels the synergistic ion conduction within halide HSEs and provides a comprehensive explanation of the amorphization effect. More importantly, the excellent deformability, high-voltage stability, and expandability of HSEs enable effective SSSB integration. Using a cold-pressed cathode electrode composite of uncoated Na0.85 Mn0.5 Ni0.4 Fe0.1 O2 and HSEs, the SSSBs present stable cycle performance with a capacity retention of 91.0% after 100 cycles at 0.2 C.
RESUMEN
Lithium (Li) metal is considered as the "holy grail" of anode materials for next-generation high energy batteries. However, notorious dendrite growth and interfacial instability could induce irreversible capacity loss and safety issues, limiting the practical application of Li metal anodes. Herein, we develop a novel approach to construct a borate-based artificial solid-electrolyte interphase (designated as B-SEI) through the reaction of metallic Li with triethylamine borane (TEAB). According to our cryogenic electron microscopy (Cryo-EM) characterization results, the artificial SEI adopts a glass-crystal bilayer structure, which facilitates uniform Li-ion transport and inhibits dendrite growth during Li plating. Benefiting from such an artificial SEI, the Li anode delivers an improved rate performance and prolonged cycle life. The symmetric Li/B-SEI||Li/B-SEI cell can maintain stable cycling for 700 h at a high current density of 3 mA cm-2. The full-cell pairing Li/B-SEI with LiFePO4 only exhibits minimal capacity decay after 500 cycles in a conventional carbonate-based electrolyte. This work demonstrates the feasibility of building a boride-based artificial SEI to stabilize the Li metal anode based on microscopic characterization results and comprehensive electrochemical data, which represents a promising avenue to develop practical Li metal batteries.
RESUMEN
As exciting candidates for next-generation energy storage, all-solid-state lithium batteries (ASSLBs) are highly dependent on advanced solid-state electrolytes (SSEs). Here, using cost-effective LaCl3 and CeCl3 lattice (UCl3 -type structure) as the host and further combined with a multiple-cation mixed strategy, we report a series of UCl3 -type SSEs with high room-temperature ionic conductivities over 10-3 â S cm-1 and good compatibility with high-voltage oxide cathodes. The intrinsic large-size hexagonal one-dimensional channels and highly disordered amorphous phase induced by multi-metal cation species are believed to trigger fast multiple ionic conductions of Li+ , Na+ , K+ , Cu+ , and Ag+ . The UCl3 -type SSEs enable a stable prototype ASSLB capable of over 3000â cycles and high reversibility at -30 °C. Further exploration of the brand-new multiple-cation mixed chlorides is likely to lead to the development of advanced halide SSEs suitable for ASSLBs with high energy density.
RESUMEN
A stable solid electrolyte interphase (SEI) layer is crucial for lithium metal anode (LMA) to survive in long-term cycling. However, chaotic structures and chemical inhomogeneity of natural SEI make LMA suffering from exasperating dendrite growth and severe electrode pulverization, which hinder the practical application of LMAs. Here, we design a catalyst-derived artificial SEI layer with an ordered polyamide-lithium hydroxide (PA-LiOH) bi-phase structure to modulate ion transport and enable dendrite-free Li deposition. The PA-LiOH layer can substantially suppress the volume changes of LMA during Li plating/stripping cycles, as well as alleviate the parasitic reactions between LMA and electrolyte. The optimized LMAs demonstrate excellent stability in Li plating/stripping cycles for over 1000â hours at an ultra-high current density of 20â mA cm-2 in Li||Li symmetric cells. A high coulombic efficiency up to 99.2 % in Li half cells in additive-free electrolytes is achieved even after 500â cycles at a current density of 1â mA cm-2 with a capacity of 1â mAh cm-2 .
RESUMEN
The electrochemical nitrate reduction reaction (NO3RR) is a promising alternative synthetic route for sustainable ammonia (NH3) production, because it not only eliminates nitrate (NO3-) from water but also produces NH3 under mild operating conditions. However, owing to the complicated eight-electron reaction and the competition from the hydrogen evolution reaction, developing catalysts with high activities and Faradaic efficiencies (FEs) is highly imperative to improve the reaction performance. In this study, Cu-doped Fe3O4 flakes are fabricated and demonstrated to be excellent catalysts for electrochemical conversion of NO3- to NH3, with a maximum FE of â¼100% and an NH3 yield of 179.55 ± 16.37 mg h-1 mgcat-1 at -0.6 V vs RHE. Theoretical calculations reveal that doping the catalyst surface with Cu results in a more thermodynamically facile reaction. These results highlight the feasibility of promoting the NO3RR activity using heteroatom doping strategies.
RESUMEN
High-energy Ni-rich layered oxide cathode materials such as LiNi0.8Mn0.1Co0.1O2 (NMC811) suffer from detrimental side reactions and interfacial structural instability when coupled with sulfide solid-state electrolytes in all-solid-state lithium-based batteries. To circumvent this issue, here we propose a gradient coating of the NMC811 particles with lithium oxy-thiophosphate (Li3P1+xO4S4x). Via atomic layer deposition of Li3PO4 and subsequent in situ formation of a gradient Li3P1+xO4S4x coating, a precise and conformal covering for NMC811 particles is obtained. The tailored surface structure and chemistry of NMC811 hinder the structural degradation associated with the layered-to-spinel transformation in the grain boundaries and effectively stabilize the cathode|solid electrolyte interface during cycling. Indeed, when tested in combination with an indium metal negative electrode and a Li10GeP2S12 solid electrolyte, the gradient oxy-thiophosphate-coated NCM811-based positive electrode enables the delivery of a specific discharge capacity of 128 mAh/g after almost 250 cycles at 0.178 mA/cm2 and 25 °C.
RESUMEN
Improving the utilization of platinum in proton-exchange membrane (PEM) fuel cells is critical to reducing their cost. In the past decade, numerous Pt-based oxygen reduction reaction catalysts with high specific and mass activities have been developed. However, the high activities are mostly achieved in rotating disk electrode (RDE) measurement and have rarely been accomplished at the membrane electrode assembly (MEA) level. The failure of these direct translations from RDE to MEA has been well documented with several key reasons having been previously identified. One of them is the resistance caused by complex mass transport pathways in the MEA. Herein, we improve the proton and oxygen transportations in the MEA by building a thin and uniform distribution of ionomer on the catalyst surface. As a result, a PEM fuel cell design is capable of showing a current density improvement of 38% at the same voltage (0.6 V) under the H2/air operation.
RESUMEN
The revival of ternary halides Li-M-X (M = Y, In, Zr, etc.; X = F, Cl, Br) as solid-state electrolytes (SSEs) shows promise in realizing practical solid-state batteries due to their direct compatibility toward high-voltage cathodes and favorable room-temperature ionic conductivities. Most of the reported superionic halide SSEs have a structural pattern of [MCl6]x- octahedra and generate a tetrahedron-assisted Li+ ion diffusion pathway. Here, we report a new class of zeolite-like halide frameworks, SmCl3, for example, in which 1-dimensional channels are enclosed by [SmCl9]6- tricapped trigonal prisms to provide a short jumping distance of 2.08 Å between two octahedra for Li+ ion hopping. The fast Li+ diffusion along the channels is verified through ab initio molecular dynamics simulations. Similar to zeolites, the SmCl3 framework can be grafted with halide species to obtain mobile ions without altering the base structure, achieving an ionic conductivity over 10-4 S cm-1 at 30 °C with LiCl as the adsorbent. Moreover, the universality of the interface-bonding behavior and ionic diffusion in a class of framework materials is demonstrated. It is suggested that the ionic conductivity of the MCl3/halide composite (M = La-Gd) is likely in correlation with the ionic conductivity of the grafted halide species, interfacial bonding, and framework composition/dimensions. This work reveals a potential class of halide structures for superionic conductors and opens up a new frontier for constructing zeolite-like frameworks in halide-based materials, which will promote the innovation of superionic conductor design and contribute to a broader selection of halide SSEs.
RESUMEN
Rechargeable solid-state Na metal batteries (SSNMB) can offer high operational safety and energy density. However, poor solid-solid contact between the electrodes and the electrolyte can dramatically increase interfacial resistance and Na dendrite formation, even at low current rates. Therefore, we developed a carbon-fiber-supported liquid Na-K alloy anode that ensures close anode-electrolyte contact, enabling superior cycle stability and rate capability. We then demonstrated the first cryogenic transmission electron microscopy (cryo-TEM) characterization of an SSNMB, capturing the evolution of solid-electrolyte interphase (SEI) and revealing both crystalline and amorphous phases, which could facilitate ion transport and prevent continuous side reactions. By enhancing contact between the Na-K alloy and solid-state electrolyte, these symmetric cells are capable of cycling for over 800 h without notable increased polarization and enable an unprecedented critical current density (CCD) at 40 mA cm-2. Our liquid Na-K alloy approach offers a promising strategic avenue toward commercial SSNMBs.
RESUMEN
Electrochemical nitrate reduction has become an appealing "waste-to-wealth" approach for sustainable NH3 synthesis owing to its mild operating conditions. However, developing catalysts with high activities and Faradaic efficiencies for this complicated eight-electron reaction is a great challenge. Herein, bismuth ferrite (BiFeO3) flakes, with a distorted perovskite-type structure, are demonstrated to be excellent catalysts for electrochemical NH3 synthesis via nitrate reduction, with a maximum Faradaic efficiency of 96.85%, NH3 yield of 90.45 mg h-1 mgcat-1, at -0.6 V vs. reversible hydrogen electrode. During the nitrate reduction reaction, the crystalline BiFeO3 rapidly converts into an amorphous phase, which is stable in the long term reaction. These results open a new window for rational design of more active and durable electrocatalysts.
RESUMEN
The high specific capacity of alkalic metal (Li, Na, and K) anodes has drawn widespread interest; however, the practical applications of alkalic metal anodes have been hampered by dendrite growth and interfacial instability, resulting in performance deterioration and even safety issues. Here, we describe a simple method for building tunable fluoride-based artificial solid-electrolyte interphase (SEI) from the fluorination reaction of alkali metals with a mild organic fluorinating reagent. Comprehensive characterization by advanced electron microscopes shows that the LiF-based artificial SEI adopts a crystal-glass structure, which enables efficient Li ion transport and improves structural integrity against the volume changes that occur during Li plating/stripping. Compared with bare Li anode, the ones with artificial SEI exhibit decreased voltage hysteresis, enhanced rate capability, and prolonged cycle life. This method is also applied to generate fluoride-based artificial SEI on Na and K metal anodes that brings significant improvement in battery performance.
Asunto(s)
Fluoruros , Halogenación , Electrodos , Interfase , Litio/química , Sodio/químicaRESUMEN
Aprotic lithium-oxygen batteries (LOBs) are promising energy storage systems characterized by ultrahigh theoretical energy density. Extensive research has been devoted to this battery technology, yet the detailed operational mechanisms involved, particularly unambiguous identification of various discharge products and their specific distributions, are still unknown or are subjects of controversy. This is partly because of the intrinsic complexity of the battery chemistry but also because of the lack of atomic-level insight into the oxygen electrodes acquired via reliable techniques. In the current study, it is demonstrated that electron beam irradiation could induce crystallization of amorphous discharge products. Cryogenic conditions and a low beam dosage have to be used for reliable transmission electron microscopy (TEM) characterization. High-resolution cryo-TEM and electron energy loss spectroscopy (EELS) analysis of toroidal discharge particles unambiguously identified the discharge products as a dominating amorphous LiO2 phase with only a small amount of nanocrystalline Li2O2 islands dispersed in it. In addition, uniform mixing of carbon-containing byproducts is identified in the discharge particles with cryo-EELS, which leads to a slightly higher charging potential. The discharge products can be reversibly cycled, with no visible residue after full recharge. We believe that the amorphous superoxide dominating discharge particles can lead researchers to reconsider the chemistry of LOBs and pay special attention to exclude beam-induced artifacts in traditional TEM characterizations.
RESUMEN
Hybrid methylammonium lead iodide (MAPbI3) perovskite nanoplatelets (NPLs) have emerged as promising optoelectronic materials because of their remarkable properties in defect tolerance, band gap tunability, and light emission. However, the detailed formation mechanism, in particular the atomic structure information in the initial nucleation stage, stands as a mystery because of the intrinsic vulnerability toward moisture, electron beams, etc. By virtue of the imaging technique under the extremely low electron dose of the cryogenic TEM, atomic structures of MAPbI3 NPLs are imaged, and a twist-to-untwist structural evolution is captured. According to theoretical calculation results, the twist-to-untwist evolution is a spontaneous process, and the band gap will be reduced, which is further verified by the red shift of photoluminescence peaks with aging time. Moreover, MA cation polarization is observed by quantitative analysis of the atomic-resolution image of single-crystalline MAPbI3 NPLs, which demonstrates the high ion mobility in the lattice of the hybrid halide perovskites.
RESUMEN
Layered sodium manganese-based oxides are appealing cathode candidates due to their high capacity and cost-effectiveness, yet performance degradation related with unwanted structural evolution still remains a disturbing disadvantage. Herein, atomic resolution STEM (scanning transmission electron microscopy) images of Na-extracted Na2/3NixCo1/3-xMn2/3O2 (x = 0, 1/6, 1/3) are collected and analyzed, to decipher the effect of cobalt and nickel substitution on the structural integrity of layered manganese-based oxides. Cobalt substitution is demonstrated to alleviate the lattice stress and retain the layered structure after sodium removal, and only a local P2-to-O2 phase transition could be identified. By contrast, various types of defects and phase transformation, including rarely reported P2-to-O3, are discovered in the Ni-substituted oxides. The generation of spinel and rock-salt phases is the critical evidence of cation mixing that leads to unrecoverable capacity loss. The interplay of different transition metals is complex, and compositional optimization is encouraged to minimize the effect of the concomitant phase transition.
RESUMEN
Single-atom catalysts (SACs) have been applied in many fields due to their superior catalytic performance. Because of the unique properties of the single-atom-site, using the single atoms as catalysts to synthesize SACs is promising. In this work, we have successfully achieved Co1 SAC using Pt1 atoms as catalysts. More importantly, this synthesis strategy can be extended to achieve Fe and Ni SACs as well. X-ray absorption spectroscopy (XAS) results demonstrate that the achieved Fe, Co, and Ni SACs are in a M1-pyrrolic N4 (M= Fe, Co, and Ni) structure. Density functional theory (DFT) studies show that the Co(Cp)2 dissociation is enhanced by Pt1 atoms, thus leading to the formation of Co1 atoms instead of nanoparticles. These SACs are also evaluated under hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), and the nature of active sites under HER are unveiled by the operando XAS studies. These new findings extend the application fields of SACs to catalytic fabrication methodology, which is promising for the rational design of advanced SACs.
RESUMEN
Most P2-type layered oxides exhibit a large volume change when they are charged into high voltage, and it further leads to bad structural stability. In fact, high voltage is not the reason which causes the irreversible phase transition. There are two internal factors which affect structural evolution: the amount and distribution of Na ions retained in the lattice. Hereon, a series of layered oxides Na2/3 Mnx Nix-1/3 Co4/3-2x O2 (1/3≤x≤2/3) were synthesized. It is observed that different components have different structural evolutions during the charge/discharge processes, and further researches find that the distribution of Na ions in layers is the main factor. By controlling the distribution of Na ions, the phase transition process can be well controlled. As the referential component, P2-Na2/3 Mn1/2 Ni1/6 Co1/3 O2 cathode with uniform distribution of Na ions is cycled at the voltage window of 1.5-4.5â V, which exhibits a volume change as low as 1.9 %. Such a low strain is beneficial for cycling stability. The current work provides a new and effective route to regulate the structural evolution of the promising P2-type layered cathode for sodium ion batteries.