RESUMEN
We propose and experimentally demonstrate a parallel pulsed chaos light detection and ranging (LiDAR) system with a high peak power, parallelism, and anti-interference. The system generates chaotic microcombs based on a chip-scale Si3N4 microresonator. After passing through an acousto-optic modulator, the continuous-wave chaotic microcomb can be transformed into a pulsed chaotic microcomb, in which each comb line provides pulsed chaos. Thus, a parallel pulsed chaos signal is generated. Using the parallel pulsed chaos as the transmission signal of LiDAR, we successfully realize a 4-m three-dimensional imaging experiment using a microelectromechanical mirror for laser scanning. The experimental results indicate that the parallel pulsed chaos LiDAR can detect twice as many pixels as direct detection continuous wave parallel chaos LiDAR under a transmission power of -6 dBm, a duty cycle of 25%, and a pulse repetition frequency of 100 kHz. By further increasing the transmission power to 10 dBm, we acquire an 11â cm × 10â cm image of a target scene with a resolution of 30 × 50 pixels. Finally, the anti-jamming ability of the system is evaluated, and the results show that the system can withstand interferences of at least 15â dB.
RESUMEN
The remarkable ultrathin ability of metalenses gives them potential as a next-generation imaging candidate. However, the inherent chromatic aberration of metalenses restricts their widespread application. We present an achromatic metalens with optoelectronic computing fusion (OCF) to mitigate the impact of chromatic aberration and simultaneously avoid the significant challenges of nanodesign, nanofabrication, and mass production of metalenses, a method different from previous methods. Leveraging the nonlinear fitting, we demonstrate that OCF can effectively learn the chromatic aberration mapping of metalens and thus restore the chromatic aberration. In terms of the peak signal-to-noise ratio index, there is a maximum improvement of 12 dB, and â¼8 ms is needed to correct the chromatic aberration. Furthermore, the edge extraction of images and super-resolution reconstruction that effectively enhances resolution by a factor of 4 are also demonstrated with OCF. These results offer the possibility of applications of metalenses in mobile cameras, virtual reality, etc.
RESUMEN
Electromagnetic wave analog computing is an effective method to overcome the bottleneck of electronic computing, which has attracted the attention of scientists. However, many spatial analog signal processing systems based on electromagnetic waves can only execute one unique mathematical operator and cannot provide multiple operators for users to choose arbitrarily. In order to enhance the function of the current spatial analog computing system, we design a coding structure with amplitude-phase decoupling modulation to realize the analog signal processor that supports the switching of mathematical operators and demonstrate the precise switching from the first-order spatial differential operator to the first-order spatial integral operator. Our design idea can be used as a paradigm for designing small reconfigurable analog computing systems, paving the way for the construction of high-speed, multifunctional, and universal signal processing systems. This idea can be extended to any other range of waves.
RESUMEN
The on-chip nano-integration of large-scale optical phased arrays (OPAs) is a development trend. However, the current scale of integrated OPAs is not large because of the limitations imposed by the lateral dimensions of beam-splitting structures. Here, we propose an ultra-compact and broadband OPA beam-splitting scheme with a nano-inverse design. We employed a staged design to obtain a T-branch with a wavelength bandwidth of 500 nm (1300-1800 nm) and an insertion loss of -0.2 dB. Owing to the high scalability and width-preserving characteristics, the cascaded T-branch configuration can significantly reduce the lateral dimensions of an OPA, offering a potential solution for the on-chip integration of a large-scale OPA. Based on three-dimensional finite-difference time-domain (3D FDTD) simulations, we demonstrated a 1 × 16 OPA beam-splitter structure composed entirely of inverse-designed elements with a lateral dimension of only 27.3 µm. Additionally, based on the constructed grating couplers, we simulated the range of the diffraction angle θ for the OPA, which varied by 0.6°-41.6° within the wavelength range of 1370-1600 nm.
RESUMEN
In this work, we design, fabricate, and characterize a different-mode (waveguide-connected) power splitter ((W)PS) by what we believe to be a novel multi-dimension direct-binary-search algorithm that can significantly balance the device performance, time cost, and fabrication robustness by searching the state-dimension, rotation-dimension, shape-dimension, and size-dimension parameters. The (W)PS can simultaneously generate the fundamental transverse electric (TE0) and TE1 mode with the 1:1 output balance. Compared with the PS, the WPS can greatly shorten the adiabatic taper length between the single-mode waveguide and the grating coupler. The measured results of the different-mode (W)PS indicate that the insertion loss and crosstalk are less than 0.9 (1.3) dB and lower than -17.8 (-14.9) dB from 1540â nm to 1560â nm. In addition, based on the tunable tap couplers, the different-mode (W)PS can be extended to multiple output ports with different modes and different transmittances.
RESUMEN
Ultrafast physical random bit (PRB) generators and integrated schemes have proven to be valuable in a broad range of scientific and technological applications. In this study, we experimentally demonstrated a PRB scheme with a chaotic microcomb using a chip-scale integrated resonator. A microcomb contained hundreds of chaotic channels, and each comb tooth functioned as an entropy source for the PRB. First, a 12 Gbits/s PRB signal was obtained for each tooth channel with proper post-processing and passed the NIST Special Publication 800-22 statistical tests. The chaotic microcomb covered a wavelength range from 1430 to 1675 nm with a free spectral range (FSR) of 100 GHz. Consequently, the combined random bit sequence could achieve an ultra-high rate of about 4 Tbits/s (12 Gbits/s × 294 = 3.528 Tbits/s), with 294 teeth in the experimental microcomb. Additionally, denser microcombs were experimentally realized using an integrated resonator with 33.6 GHz FSR. A total of 805 chaotic comb teeth were observed and covered the wavelength range from 1430 to 1670 nm. In each tooth channel, 12 Gbits/s random sequences was generated, which passed the NIST test. Consequently, the total rate of the PRB was approximately 10 Tbits/s (12 Gbits/s × 805 = 9.66 Tbits/s). These results could offer potential chip solutions of Pbits/s PRB with the features of low cost and a high degree of parallelism.
RESUMEN
Optical power splitters with ultra-broadband and ultra-low insertion loss are desired in the field of photonic integration. Combining two inverse design algorithms for staged optimization, we present the design of a Y-junction photonic power splitter with 700â nm wavelength bandwidth (from 1200â nm to 1900â nm) within a 0.2â dB insertion loss, corresponding to a 93 THz frequency bandwidth. The average insertion loss is approximately -0.057â dB in the valuable C-band. Moreover, we comprehensively compared the insertion loss performance of different types and sizes of curved waveguides, and also give the cases of 1:4 and 1:6 cascaded power splitters. These scalable Y-junction splitters provide new alternatives for high-performance photonic integration.
RESUMEN
Photonic logic gates have important applications in fast data processing and optical communication. This study aims to design a series of ultra-compact non-volatile and reprogrammable photonic logic gates based on the Sb2Se3 phase-change material. A direct binary search algorithm was adopted for the design, and four types of photonic logic gates (OR, NOT, AND, and XOR) are created using silicon-on-insulator technology. The proposed structures had very small sizes of 2.4 µm × 2.4 µm. Three-dimensional finite-difference time-domain simulation results show that, in the C-band near 1550 nm, the OR, NOT, AND, and XOR gates exhibit good logical contrast of 7.64, 6.1, 3.3, and 18.92 dB, respectively. This series of photonic logic gates can be applied in optoelectronic fusion chip solutions and 6G communication systems.
RESUMEN
Metalens optical tweezers technology has several advantages for manipulating micro-nano particles and high integration. Here, we used particle swarm optimization (PSO) to design a novel metalens tweezer, which can get 3-dimensional trapping of particles. The numerical aperture (NA) of the metalens can reach 0.97 and the average focusing efficiency is 44%. Subsequently, we analyzed the optical force characteristics of SiO2 particles with a radius of 350â nm at the focal point of the achromatic metalens. We found the average maximum force of SiO2 particles in the x-direction and z-direction to be 0.88 pN and 0.72 pN, respectively. Compared with the dispersive metalens, it is beneficial in maintaining the constant of optical force, the motion state of trapped particles, and the stability of the trapping position.
RESUMEN
Ultra-compact waveguide crossing (UC-WC) is a basic component in optoelectronic fusion chip solutions, as its footprint is smaller in the orders of magnitude than that of traditional photonic integrated circuits (PICs). However, a large loss of UC-WC (decibel level) becomes a barrier to scaling and practicality. Here, we propose a series of ultra-low loss UC-WC silicon devices using an advanced hybrid design that combines the adjoint method with the direct binary search (DBS) algorithm. Simulation results show that our 2 × 2 UC-WC has an insertion loss as low as 0.04â dB at 1550â nm, which is about ten times lower than the previous UC-WC results. In the valuable C-band (1530-1565â nm), the insertion loss of UC-WC is lower than -0.05â dB, and the channel crosstalk is lower than -34â dB. Furthermore, for the 3 × 3 UC-WC device, the highest insertion loss in the entire C-band is approximately -0.07â dB, and the highest channel crosstalk is lower than -33â dB. Additionally, the 4 × 4 and more complex 8 × 8 UC-WC devices were also analyzed. The highest insertion loss for 4 × 4 and 8 × 8 UC-WC in the C-band is only -0.19 dB and -0.20 dB, respectively, and the highest channel crosstalk is approximately -22dB and -28 dB, respectively. These results confirm that the designed devices possess two attractive features simultaneously: ultra-compactness and ultra-low insertion loss, which may be of great value in future large-scale optoelectronic fusion chips.
RESUMEN
Silicon-based optical chaos has many advantages, such as compatibility with complementary metal oxide semiconductor (CMOS) integration processes, ultra-small size, and high bandwidth. Generally, it is challenging to reconstruct chaos accurately because of its initial sensitivity and high complexity. Here, a stacked convolutional neural network (CNN)-long short-term memory (LSTM) neural network model is proposed to reconstruct optical chaos with high accuracy. Our network model combines the advantages of both CNN and LSTM modules. Further, a theoretical model of integrated silicon photonics micro-cavity is introduced to generate chaotic time series for use in chaotic reconstruction experiments. Accordingly, we reconstructed the one-dimensional, two-dimensional, and three-dimensional chaos. The experimental results show that our model outperforms the LSTM, gated recurrent unit (GRU), and CNN models in terms of MSE, MAE, and R-squared metrics. For example, the proposed model has the best value of this metric, with a maximum improvement of 83.29% and 49.66%. Furthermore, 1D, 2D, and 3D chaos were all significantly improved with the reconstruction tasks.
Asunto(s)
Óptica y Fotónica , Silicio , Memoria a Largo Plazo , Redes Neurales de la ComputaciónRESUMEN
Logic gates, as one of the most important basic units in electronic integrated circuits (EICs), are also equally important in photonic integrated circuits (PICs). In this study, we proposed a non-volatile, ultra-compact all-photonics logic gate. The footprint is only 2 µm × 2 µm. We regulate the phase change of optical phase change materials(O-PCMs) Sb2Se3 to switch the function of the logic gate. The Sb2Se3 possess a unique non-volatile optical phase change function; therefore, when Sb2Se3 is in the crystalline or amorphous state, our device can work as XOR gate or AND gate, and our designed logic '1' and logic '0' contrasts reach 11.8 dB and 5.7 dB at 1550 nm, respectively. Compared with other traditional optical logic gates, our device simultaneously has non-volatile characteristics, tunability, and additionally an ultra-small size. These results could fully meet the needs of fusion between PICs and EICs, and developing truly chip-scale optoelectronic logic solution.
RESUMEN
A series of reconfigurable compact photonic arbitrary power splitters are proposed based on the hybrid structure of silicon and Ge2Sb2Se4Te1 (GSST), which is a new kind of non-volatile optical phase change material (O-PCM) with low absorption. Our pixelated meta-hybrid has an extremely small photonic integrated circuit (PIC) footprint with a size comparable to that of the most advanced electronic integrated circuits (EICs). The power-split ratio can be reconfigured in a completely digital manner through the amorphous and crystalline switching of the GSST material, which only coated less than one-fifth of the pattern allocation area. The target power-split ratio between the output channels can be arbitrarily reconfigured digitally with high precision and in the valuable C-band (1530-1560 nm) based on the analysis of three-dimensional finite-difference time-domain. The 1 × 2, 1 × 3, and 1 × 4 splitting configurations were all investigated with a variety of power-split ratios for each case, and the corresponding true value tables of GSST distribution are given. These non-volatile hybrid photonic splitters offer the advantages of an extremely small footprint and non-volatile digital programmability, which are favorable to the truly optoelectronic fusion chip.
RESUMEN
Chaos in nonlinear dynamical systems is featured with irregular appearance and with high sensitivity to initial conditions. Near-infrared light chaos based on semiconductor lasers has been extensively studied and has enabled various applications. Here, we report a fully-developed hyperchaos in the mid-infrared regime, which is produced from interband cascade lasers subject to the external optical feedback. Lyapunov spectrum analysis demonstrates that the chaos exhibits three positive Lyapunov exponents. Particularly, the chaotic signal covers a broad frequency range up to the GHz level, which is two to three orders of magnitude broader than existed mid-infrared chaos solutions. The interband cascade lasers produce either periodic oscillations or low-frequency fluctuations before bifurcating to hyperchaos. This hyperchaos source is valuable for developing long-reach secure optical communication links and remote chaotic Lidar systems, taking advantage of the high-transmission windows of the atmosphere in the mid-infrared regime.
RESUMEN
Mid-infrared free-space optical communication has a large potential for high speed communication due to its immunity to electromagnetic interference. However, data security against eavesdroppers is among the obstacles for private free-space communication. Here, we show that two uni-directionally coupled quantum cascade lasers operating in the chaotic regime and the synchronization between them allow for the extraction of the information that has been camouflaged in the chaotic emission. This building block represents a key tool to implement a high degree of privacy directly on the physical layer. We realize a proof-of-concept communication at a wavelength of 5.7 µm with a message encryption at a bit rate of 0.5 Mbit/s. Our demonstration of private free-space communication between a transmitter and receiver opens strategies for physical encryption and decryption of a digital message.
RESUMEN
We present an experimental and theoretical physical random bit (PRB) generator using the mesoscopic chaos from a photonic-crystal optomechanical microcavity with a size of â¼10µm and very low operating intracavity energy of â¼60 Femto-Joule that was fabricated with CMOS compatible processes. Moreover, two kinds of PRB generation were proposed with rates over gigabits per second (Gbps). The randomness of the large PRB strings was further veriï¬ed using the NIST Special Publication 800-22. In addition, the Diehard statistical test was also used to confirm the quality of the obtained PRBs. The results of this study can offer a new generation of dedicated PRB solutions that can be integrated on Si substrates, which can speed up systems and eliminate reliance on external mechanisms for randomness collection.
RESUMEN
A novel multi-injection module (MIM) is introduced into a typical distant star-type laser network, which is composed of a hub semiconductor laser node (H-SLN), star semiconductor laser nodes (S-SLNs) and tens of kilometers of fiber links. The chaotic synchronization of this distant network is investigated both experimentally and theoretically. As a result of using the MIM, a significantly low correlation (about 0.2) is successfully achieved between the H-SLN and S-SLNs in different clusters. This correlation is much lower than in previously reported results. Even when the fiber length is extended to 80 kilometers a low correlation (about 0.18) between the H-SLN and S-SLNs in different clusters is also obtained. Moreover, the dependence of chaotic synchronization on the operating conditions, such as the injection power, frequency detuning, and frequency mismatch between arbitrary nodes are examined. Lastly, using a theoretical model, we discuss the broad conditions for achieving chaotic synchronization among S-SLNs in the same cluster, and analyze the effect of the MIM branch number on chaotic synchronization.
RESUMEN
Condensation freezing inhibition is of great practical importance for anti-icing applications; however, no coatings with this performance have been reported. Here, we report the inhibition of condensation freezing on patterned polyelectrolyte coatings, including polyelectrolyte brush (PB), polyelectrolyte multilayer (PEM), and polyelectrolyte hydrogel (PH) surfaces, benefiting from their feature in regulating ice nucleation and propagation via changing counterions. On the reported surfaces, ice nucleation can be initiated exclusively at the domains with the polyelectrolytes; moreover, spontaneous ice propagation can be achieved atop the patterned polyelectrolyte surface. Consequently, condensed water surrounding the frozen drops on the patterned polyelectrolyte surface evaporates due to the instantaneously released latent heat in the course of ice propagation. Afterward, ice grows specifically on polyelectrolyte surfaces via desublimation as the saturated vapor pressure of ice is smaller than that of condensed water drops. As such, an ice-free region up to 96% of the entire surface area can be accomplished. We demonstrate that various polyelectrolyte coatings can be easily introduced on almost all surfaces, revealing great promise for anti-icing applications.
RESUMEN
Mid-infrared quantum cascade lasers operating under external optical feedback and external periodic bias forcing are shown to exhibit a deterministic chaotic pattern composed of frequencies which are linked to the one of the forcing. Results also show that both the amplitude and the frequency of the forcing play a key role in the number of retrieved spikes per modulation period. These findings are of paramount importance for chaotic operation of quantum cascade lasers in applications such as optical countermeasure systems and secure atmospheric transmission lines, as well as for simulating neuronal systems and the communication between neurons due to sudden bursts.
RESUMEN
Chaos has revolutionized the field of nonlinear science and stimulated foundational studies from neural networks, extreme event statistics, to physics of electron transport. Recent studies in cavity optomechanics provide a new platform to uncover quintessential architectures of chaos generation and the underlying physics. Here, we report the generation of dynamical chaos in silicon-based monolithic optomechanical oscillators, enabled by the strong and coupled nonlinearities of two-photon absorption induced Drude electron-hole plasma. Deterministic chaotic oscillation is achieved, and statistical and entropic characterization quantifies the chaos complexity at 60 fJ intracavity energies. The correlation dimension D2 is determined at 1.67 for the chaotic attractor, along with a maximal Lyapunov exponent rate of about 2.94 times the fundamental optomechanical oscillation for fast adjacent trajectory divergence. Nonlinear dynamical maps demonstrate the subharmonics, bifurcations and stable regimes, along with distinct transitional routes into chaos. This provides a CMOS-compatible and scalable architecture for understanding complex dynamics on the mesoscopic scale.