RESUMEN
BACKGROUND: Da Vinci Robotics-assisted total mesorectal excision (TME) surgery for rectal cancer is becoming more widely used. There is no strong evidence that robotic-assisted surgery and laparoscopic surgery have similar outcomes in elderly patients with TME for rectal cancer. AIM: To determine the improved oncological outcomes and short-term efficacy of robot-assisted surgery in elderly patients undergoing TME surgery. METHODS: A retrospective study of the clinical pathology and follow-up of elderly patients who underwent TME surgery at the Department of Gastrointestinal Oncology at the Affiliated Hospital of Nanjing University of Chinese Medicine was conducted from March 2020 through September 2023. The patients were divided into a robot-assisted group (the R-TME group) and a laparoscopic group (the L-TME group), and the short-term efficacy of the two groups was compared. RESULTS: There were 45 elderly patients (≥ 60 years) in the R-TME group and 50 elderly patients (≥ 60 years) in the L-TME group. There were no differences in demographics, conversion rates, or postoperative complication rates. The L-TME group had a longer surgical time than the R-TME group [145 (125, 187.5) vs 180 (148.75, 206.25) min, P = 0.005), and the first postoperative meal time in the L-TME group was longer than that in the R-TME (4 vs 3 d, P = 0.048). Among the sex and body mass index (BMI) subgroups, the R-TME group had better outcomes than did the L-TME group in terms of operation time (P = 0.042) and intraoperative assessment of bleeding (P = 0.042). In the high BMI group, catheter removal occurred earlier in the R-TME group than in the L-TME group (3 vs 4 d, P = 0.001), and autonomous voiding function was restored. CONCLUSION: The curative effect and short-term efficacy of robot-assisted TME surgery for elderly patients with rectal cancer are similar to those of laparoscopic TME surgery; however, robotic-assisted surgery has better short-term outcomes for individuals with risk factors such as obesity and pelvic stenosis. Optimizing the learning curve can shorten the operation time, reduce the recovery time of gastrointestinal function, and improve the prognosis.
RESUMEN
Polyethylene (PE), a highly prevalent non-biodegradable polymer in the field of plastics, presents a waste management issue. To alleviate this issue, bio-based PE (bio-PE), derived from renewable resources like corn and sugarcane, offers an environmentally friendly alternative. This review discusses various production methods of bio-PE, including fermentation, gasification, and catalytic conversion of biomass. Interestingly, the bio-PE production volumes and market are expanding due to the growing environmental concerns and regulatory pressures. Additionally, the production of PE and bio-PE biocomposites using agricultural waste as filler materials, highlights the growing demand for sustainable alternatives to conventional plastics. According to previous studies, addition of ≈50% defibrillated corn and abaca fibers into bio-PE matrix and a compatibilizer, results in the highest Young's modulus of 4.61 and 5.81 GPa, respectively. These biocomposites have potential applications in automotive, building construction, and furniture industries. Moreover, the advancement made in abiotic and biotic degradation of PE and PE biocomposites is elucidated to address their environmental impacts. Finally, the paper concludes with insights into the opportunities, challenges, and future perspectives in the sustainable production and utilization of PE and bio-PE biocomposites. In summary, production of PE and bio-PE biocomposites can contribute to a cleaner and sustainable future.
Asunto(s)
Polietileno , Polietileno/química , Biomasa , FermentaciónRESUMEN
This review explores the potential of using different types of ash, namely fly ash, biomass ash, and coal ash etc., as mediums for CO2 capture and sequestration. The diverse origins of these ash types - municipal waste, organic biomass, and coal combustion - impart unique physicochemical properties that influence their suitability and efficiency in CO2 absorption. This review first discusses the environmental and economic implications of using ash wastes, emphasizing the reduction in landfill usage and the transformation of waste into value-added products. Then the chemical/physical treatments of ash wastes and their inherent capabilities in binding or reacting with CO2 are introduced, along with current methodologies utilize these ashes for CO2 sequestration, including mineral carbonation and direct air capture techniques. The application of using ash wastes for CO2 capture are highlighted, followed by the discussion regarding challenges associated with ash-based CO2 absorption approach. Finally, the article projects into the future, proposing innovative approaches and technological advancements needed to enhance the efficacy of ash in combating the increasing CO2 levels. By providing a comprehensive analysis of current strategies and envisioning future prospects, this review aims to contribute to the field of sustainable CO2 absorption and environmental management.
RESUMEN
Semiconductor quantum dots (QDs) have been used in a variety of applications ranging from optoelectronics to biodiagnostic fields, primarily due to their size dependent fluorescent nature. CdSe nanocrystals (NCs) are generally synthesized via a hot injection method in an organic solvent. However, such NCs are insoluble in water and therefore preclude the direct usage toward biological systems. Thus, the preparation of more biocompatible water-soluble QDs with a high photoluminescent quantum yield (PLQY) is extremely important for imaging applications. Although previous literature has detailed on the synthesis of CdSe NCs in water, they suffer from poor size distribution and very low PLQY. The complex formation mechanism of CdSe NCs in an aqueous environment adversely affects the quality of NCs due to the presence of OH-, H+, and H2O moieties. Here in this article, we have presented the facile hydrothermal approach to obtain size tunable (2.9-5.1 nm), aqueous CdSe NCs with a narrow emission profile having â¼40 nm fwhm with 56% PLQY. Physicochemical properties of the synthesized water-soluble CdSe NCs were studied with the help of UV-vis, PL, XRD, FTIR, XPS, and HR-TEM analysis. Furthermore, the surface of the synthesized CdSe NCs was modified with d-glucosamine via EDC and NHS coupling to obtain a stable, biocompatible bioimaging probe. Furthermore, we demonstrated that their successful bioconjugation with glucosamine could facilitate effective internalization into the cellular matrix.
RESUMEN
The presence of toxic organic pollutants in aquatic environments poses significant threats to human health and global ecosystems. Photocatalysis that enables in situ production and activation of H2 O2 presents a promising approach for pollutant removal; however, the processes of H2 O2 production and activation potentially compete for active sites and charge carriers on the photocatalyst surface, leading to limited catalytic performance. Herein, a hierarchical 2D/2D heterojunction nanosphere composed of ultrathin BiOBr and BiOI nanosheets (BiOBr/BiOI) is developed by a one-pot microwave-assisted synthesis to achieve in situ H2 O2 production and activation for efficient photocatalytic wastewater treatment. Various experimental and characterization results reveal that the BiOBr/BiOI heterojunction facilitates efficient electron transfer from BiOBr to BiOI, enabling the one-step two-electron O2 reduction for H2 O2 production. Moreover, the ultrathin BiOI provides abundant active sites for H2 O2 adsorption, promoting in situ H2 O2 activation for â¢O2 - generation. As a result, the BiOBr/BiOI hybrid exhibits excellent activity for pollutant degradation with an apparent rate constant of 0.141 min-1 , which is 3.8 and 47.3 times that of pristine BiOBr and BiOI, respectively. This work expands the range of the materials suitable for in situ H2 O2 production and activation, paving the way toward sustainable environmental remediation using solar energy.
RESUMEN
Atomically-thin monolayer WS2 is a promising channel material for next-generation Moore's nanoelectronics owing to its high theoretical room temperature electron mobility and immunity to short channel effect. The high photoluminescence (PL) quantum yield of the monolayer WS2 also makes it highly promising for future high-performance optoelectronics. However, the difficulty in strictly growing monolayer WS2, due to its non-self-limiting growth mechanism, may hinder its industrial development because of the uncontrollable growth kinetics in attaining the high uniformity in thickness and property on the wafer-scale. In this study, we report a scalable process to achieve a 4 inch wafer-scale fully-covered strictly monolayer WS2 by applying the in situ self-limited thinning of multilayer WS2 formed by sulfurization of WOx films. Through a pulsed supply of sulfur precursor vapor under a continuous H2 flow, the self-limited thinning process can effectively trim down the overgrown multilayer WS2 to the monolayer limit without damaging the remaining bottom WS2 monolayer. Density functional theory (DFT) calculations reveal that the self-limited thinning arises from the thermodynamic instability of the WS2 top layers as opposed to a stable bottom monolayer WS2 on sapphire above a vacuum sublimation temperature of WS2. The self-limited thinning approach overcomes the intrinsic limitation of conventional vapor-based growth methods in preventing the 2nd layer WS2 domain nucleation/growth. It also offers additional advantages, such as scalability, simplicity, and possibility for batch processing, thus opening up a new avenue to develop a manufacturing-viable growth technology for the preparation of a strictly-monolayer WS2 on the wafer-scale.
RESUMEN
Platinum-based metal catalysts are considered excellent converters in various catalytic reactions, particularly in fuel cell applications. The atomic structure at the nanocrystal surface and the metal interface both influence the catalytic performance, controlling the efficiency of the electrochemical reactions. Here we report the synthesis of Ag/Pt and Ag/Pd core/shell nanocrystals and insight into the formation mechanism of these bimetallic core/shell nanocrystals when undergoing oxygen plasma treatment. We carefully designed the oxidation treatment that determines the structural and compositional evolution. The accelerated oxidation-triggered diffusion of Ag toward the outer metal shell leads to the Kirkendall effect. After prolonged oxygen plasma treatment, most core/shell nanocrystals evolve into hollow spheres. At the same time, a minor fraction of the metal remains unchanged with a well-protected Ag core and a monocrystalline Pt or Pd shell. We hypothesize that the O2 plasma disturbs the Pt or Pd shell surface and introduces active O species that react with the diffused Ag from the inside out. Based on EDX elemental mapping, combined with several electron microscopic techniques, we deduced the formation mechanism of the hollow structures to be as follows: (I) the oxidation of Ag within the Pt or Pd lattice causes a disrupted crystal lattice of Pt or Pd; (II) nanochannels arise at the defect locations on the Pt or Pd shell; (III) the remaining Ag atoms pass through these nanochannels and leave a hollow crystal behind. Our findings deepen the understanding of interface dynamics of bimetallic nanostructured catalysts under an oxidative environment and unveil an alternative approach for catalyst pretreatment.
RESUMEN
Piezo-assisted photocatalysis (namely, piezo-photocatalysis), which utilizes mechanical energy to modulate spatial and energy distribution of photogenerated charge carriers, presents a promising strategy for molecule activation and reactive oxygen species (ROS) generation toward applications such as environmental remediation. However, similarly to photocatalysis, piezo-photocatalysis also suffers from inferior charge separation and utilization efficiency. Herein, a Z-scheme heterojunction composed of single Ag atoms-anchored polymeric carbon nitride (Ag-PCN) and SnO2- x is developed for efficient charge carrier transfer/separation both within the catalyst and between the catalyst and surface oxygen molecules (O2 ). As revealed by charge dynamics analysis and theoretical simulations, the synergy between the single Ag atoms and the Z-scheme heterojunction initiates a cascade electron transfer from SnO2- x to Ag-PCN and then to O2 adsorbed on Ag. With ultrasound irradiation, the polarization field generated within the piezoelectric hybrid further accelerates charge transfer and regulates the O2 activation pathway. As a result, the Ag-PCN/SnO2- x catalyst efficiently activates O2 into ·O2 - , ·OH, and H2 O2 under co-excitation of visible light and ultrasound, which are consequently utilized to trigger aerobic degradation of refractory antibiotic pollutants. This work provides a promising strategy to maneuver charge transfer dynamics for efficient piezo-photocatalysis by integrating single-atom catalysts (SACs) with Z-scheme heterojunction.
RESUMEN
Phase Change Materials (PCMs) are utilized to regulate temperature and store thermal energy in various industries such as infrastructure, electronics, solar power, and more. However, they face several limitations, such as leakage, poor thermal properties, incompatibility, as well as high flammability. Polyethylene (PE) is one of many polymers explored to enhance the desirable properties of PCMs, due to their versatile properties such as high strength, durability, chemical resistance, and low cost. The combination of PCMs and PE can be used to create composite materials, through micro/nano- encapsulation, melt-blending, formation of composites and with proper additives. They create enhanced thermal energy storage properties and in the meantime, benefited from the mechanical properties of the PE. This review provides a concise summary of the recent developments regarding PE-enhanced PCMs and provides insights into possible topics for further investigation. We summarised enhancement methods based on commonly adopted types of PEs, such as encapsulation, melt-blending, hot pressing, extrusion, and 3D printing. We then elaborate on how these PE-PCM composites are effectively utilised for heat management applications and the potential future directions in energy-saving buildings, electronic devices, and energy storage systems.
RESUMEN
The oriented attachment (OA) of 0D semiconductor nanocrystals into 1D and 2D nanostructures with unique properties is useful for the fabrication of quantum confined nanomaterials that are otherwise difficult to produce by direct synthesis. Given that the OA of 1D nanocrystals such as nanorods generally produces linear chains, rod-couple structures, or clustered columns, linking them in a facet-specific manner to produce 2D structures is challenging. Here, we report that 1D Cu2-xS nanorods undergo etching on exposure to hexylphosphonic acid under mild heating, which results in an increased curvature and a reduction in surface ligands at those sites. This causes the nanorods to fuse via their basal tip facets into chains and then cojoin through diametrically opposed side facets, resulting in atomically coupled, 2D raftlike structures. The stepwise OA of 1D nanocrystals into 2D nanostructures illustrated here expands the range of nanoarchitectures that can be produced via solution-processed methods.
RESUMEN
Branched heterostructured semiconductor nanoparticles such as core seeded tetrapods and octapods offer properties not seen in their spherical core-shell counterparts, but are challenging to synthesize with a large diversity of branch numbers via heterogeneous nucleation and growth processes alone. This work describes a process to facet-link matchstick-like Ag2S-tipped ZnS nanorods via their Ag2S tips, producing branched Ag2S-centered ZnS nanoparticles such as bipods, tripods, and in general multipods with 4 to 16 ZnS arms as a function of reaction time. The angle between nanorods in the bipods and tripods is found to be close to 120°, resulting in unexpected bent and trigonal planar geometry, respectively. This is attributed to the exposed facets of the monoclinic Ag2S tips, their relative chemical reactivities, and their atomic composition. The formation of particles with an increasing number of branches takes place in a stepwise manner, thus making the facet-linking approach a facile synthesis route to systematically obtaining a diverse set of branched heterostructured semiconductor nanoparticles with a well-defined number of branches.
RESUMEN
Liquid-based thermochromics can be incorporated into an arbitrarily shaped container and provide a visual map of the temperature changes within its volume. However, photochemical degradation, narrow temperature range of operation, and the need for stringent encapsulation processes are challenges that can limit their widespread use. Here, a unique solution-based thermochromic comprising ultrathin colloidal Sb2 Se3 nanowires in an amine-thiol mixture is introduced. The nanowires undergo reversible growth and dissolution with repeated cycles of heating and cooling between 20 and 160 °C, exhibiting intense and contrasting color changes during these processes. Furthermore, the transition temperature in which a change in color first appears can be continuously tuned over a range larger than 100 °C by introducing controlled amounts of Sn2+ . The colloidal nanowire dispersion in the amine-thiol mixture retains its thermochromic properties over hundreds of temperature cycles, continuous heating at 80 °C over months, and shelf life of up to 2 years in an open container under ambient conditions. To illustrate its utility as a robust liquid thermochromic, the nanowire solution is coated onto standard filter paper and its uses as a rewritable surface by thermal scribing, as well as an inexpensive means of visualizing the temperature distribution of an anisotropically heated block are demonstrated.
RESUMEN
Here, we describe a protocol that allows for shape-anisotropic cadmium chalcogenide nanocrystals (NCs), such as nanorods (NRs) and tetrapods (TPs), to be covalently and site-specifically linked via their end facets, resulting in polymer-like linear or branched chains. The linking procedure begins with a cation-exchange process in which the end facets of the cadmium chalcogenide NCs are first converted to silver chalcogenide. This is followed by the selective removal of ligands at their surface. This results in cadmium chalcogenide NCs with highly reactive silver chalcogenide end facets that spontaneously fuse upon contact with each other, thereby establishing an interparticle facet-to-facet attachment. Through the judicious choice of precursor concentrations, an extensive network of linked NCs can be produced. Structural characterization of the linked NCs is carried out via low- and high-resolution transmission electron microscopy (TEM), as well as energy-dispersive X-ray spectroscopy, which confirm the presence of silver chalcogenide domains between chains of cadmium chalcogenide NCs.
Asunto(s)
Cadmio/química , Nanoestructuras/química , Aminas/química , Anisotropía , Compuestos de Cadmio/síntesis química , Compuestos de Cadmio/química , Cationes/química , Microscopía Electrónica de Transmisión , Nanopartículas/química , Nanotubos/química , Compuestos de Selenio/síntesis química , Compuestos de Selenio/química , Plata/química , Espectrometría por Rayos XRESUMEN
Nonclassical growth mechanisms such as self-assembly and oriented attachment are effective ways to build complex nanostructures from simpler ones. In the latter case, the nanoparticle components are electronically coupled; however, control over the attachment between nanoparticles is highly challenging and generally requires a delicate balance between dipole-, ligand-, and solvent-based interactions. To this end, we perform incomplete cation exchange with Ag+ (Cu+) on CdSe-seeded CdS nanorods and tetrapods to exclusively convert their tips into small Ag2S (Cu2S) domains. Selective removal of the ligands from these inorganic domains results in spontaneous, site-specific bridging of the nanoparticles. Using this method, we demonstrate the fabrication of polymer-like linear and branched nanoparticles with enhanced electrical properties, as well as the stoichiometric formation of nanoparticle homo- and heterodimers and tetramers. We show that linked structures can then be completely cation exchanged with Pb2+ to generate PbSe/PbS-based nanostructured photodetector media with enhanced properties.
RESUMEN
Although multiphoton-pumped lasing from a solution of chromophores is important in the emerging fields of nonlinear optofluidics and bio-photonics, conventionally used organic dyes are often rendered unsuitable because of relatively small multiphoton absorption cross-sections and low photostability. Here, we demonstrate highly photostable, ultralow-threshold multiphoton-pumped biexcitonic lasing from a solution of colloidal CdSe/CdS nanoplatelets within a cuvette-based Fabry-Pérot optical resonator. We find that colloidal nanoplatelets surprisingly exhibit an optimal lateral size that minimizes lasing threshold. These nanoplatelets possess very large gain cross-sections of 7.3 × 10(-14) cm(2) and ultralow lasing thresholds of 1.2 and 4.3 mJ cm(-2) under two-photon (λexc=800 nm) and three-photon (λexc=1.3 µm) excitation, respectively. The highly polarized emission from the nanoplatelet laser shows no significant photodegradation over 10(7) laser shots. These findings constitute a more comprehensive understanding of the utility of colloidal semiconductor nanoparticles as the gain medium in high-performance frequency-upconversion liquid lasers.
RESUMEN
Two unique heterometallic {Ln4Co} coordination polymers with infinite Ln4(OH)4]n(8n+) chains have been successfully assembled, which represent the first example of heterometallic Ln-Co coordination polymers containing infinite lanthanide hydroxide chains.
RESUMEN
We synthesized colloidal InP/ZnS seeded CdS tetrapods by harnessing the structural stability of the InP/ZnS seed nanocrystals at the high reaction temperatures needed to grow the CdS arms. Because of an unexpected Type II band alignment at the interface of the InP/ZnS core and CdS arms that enhanced the occurrence of radiative excitonic recombination in CdS, these tetrapods were found to be capable of exhibiting highly efficient multiexcitonic dual wavelength emission of equal intensity at spectrally distinct wavelengths of â¼485 and â¼675 nm. Additionally, the Type II InP/ZnS seeded CdS tetrapods displayed a wider range of pump-dependent emission color-tunability (from red to white to blue) within the context of a CIE 1931 chromaticity diagram and possessed higher photostability due to suppressed multiexcitonic Auger recombination when compared to conventional Type I CdSe seeded CdS tetrapods. By employing time-resolved spectroscopy measurements, we were able to attribute the wide emission color-tunability to the large valence band offset between InP and CdS. This work highlights the importance of band alignment in the synthetic design of semiconductor nanoheterostructures, which can exhibit color-tunable multiwavelength emission with high efficiency and photostability.
RESUMEN
The rhizome of Alpinia officinarum is a widely used Chinese herbal medicine. The essential oil in A. officinarum rhizome is mainly composed of 1, 8-cineole and other monoterpenes, as the major bioactive ingredients. In plants, monoterpenes are synthesized through the methylerythritol phosphate (MEP) pathway in the plastids, and 1-deoxy-D-xylulose 5-phosphate reductoisomerase (DXR) is an enzyme catalyzing a committed step of the MEP pathway. In the present study, the full-length cDNA encoding DXR was cloned from the rhizome of A. officinarum, using homology-based RT-PCR and rapid amplification of cDNA ends (RACE) techniques. The new cDNA was designated as AoDXR and submitted to GenBank to be assigned with an accession number HQ874658. The full-length cDNA of AoDXR was 1 670 bp containing a 1 419 bp open reading frame encoding a polypeptide of 472 amino acids with a calculated molecular mass of 51.48 kDa and an isoelectric point of 6.15. Bioinformatic analyses revealed that AoDXR showed extensive homology with DXRs from other plant species and contained a conserved plastids transit peptide, a Pro-rich region and two highly conserved NADPH-binding motifs in its N-terminal region characterized by all plant DXRs. The phylogenetic analysis revealed that AoDXR belonged to angiosperm DXRs. The structural modeling of AoDXR showed that AoDXR had the typical V-shaped structure of DXR proteins. The tissue expression pattern analysis indicated that AoDXR expressed strongly in leaves, weak in rhizomes of A. officinarum. Exogenous methyl jasmonate (MeJA) could enhance the expression of AoDXR and the production of 1, 8-cineole in A. officinarum rhizomes. The cloning and characterization of AoDXR will be helpful to reveal the molecular regulation mechanism of monoterpene biosynthesis in A. officinarum and provides a candidate gene for metabolic engineering in improving the medicinal quality of A. officinarum rhizome.
Asunto(s)
Isomerasas Aldosa-Cetosa/genética , Alpinia/enzimología , ADN Complementario/genética , Alpinia/química , Alpinia/genética , Secuencia de Aminoácidos , Regulación Enzimológica de la Expresión Génica , Regulación de la Expresión Génica de las Plantas , Datos de Secuencia Molecular , Monoterpenos/metabolismo , FilogeniaRESUMEN
A sensitive colorimetric detection for biomolecules based on aptamer was described. Poly(dimethylsiloxane) (PDMS)-gold nanoparticles (AuNPs) composite film was used as a platform for immobilizing anti-target aptamer. PDMS-AuNPs composite film only covered with aptamer showed high inhibiting ability towards silver reduction, after target molecules were conjugated on the modified surface, the catalytic efficiency of AuNPs for silver reduction was increased. In this system, the darkness density of silver enhancement was applied for target quantitative measurement. Lysozyme and adenosine 5'-triphosphate (ATP) were tested as the models, quantitative measurements with imaging software or semiquantitative measurements with naked eyes were carried out in the range of 1×10(-2)-1 µg/mL and 1×10(-4)-1×10(3) µg/mL, the volume of reagent using in each assay is 15 µL or less. We speculated that aptamer-target conjugates' inhibition ability for AuNPs' catalytic efficiency toward silver reduction might come from charge and spatial effects. This study can offer a completely novel and relatively general approach for colorimetrical aptamer sensors with good analytical properties and potential applications. The sensor could be coupled with digital transmission of images for remote monitoring system in diagnosis, food control, and environmental analysis.
Asunto(s)
Adenosina Trifosfato/análisis , Aptámeros de Nucleótidos/química , Técnicas Biosensibles/instrumentación , Dimetilpolisiloxanos/química , Muramidasa/análisis , Nanopartículas/química , Plata/química , Animales , Técnicas Biosensibles/métodos , Sensibilidad y EspecificidadRESUMEN
This paper described a convenient semiquantitative method for colorimetric detection of protein with self-calibration integrated on the test strip. Hydrophilic paper was employed as microfluidic device for running colorimetric assay, tree-shaped design was developed to ensure uniform microfluidic flow for multiple branches. The approach was validated with bovine serum albumin (BSA) colorimetric detection, and colorimetric results observed by naked eyes were consistent with that from apparatus. The device could be coupled with digital transmission of images for remote monitoring system for diagnosis, food control, and environmental analysis.