Interpretation of the effects of rumen acidosis on the gut microbiota and serum metabolites in calves based on 16S rDNA sequencing and non-target metabolomics.

Introduction: Rumen acidosis is one of the most common diseases in beef cattle. It severely affects the normal development of calves and poses a significant threat to the farming industry. However, the influence of rumen acidosis on the gut microbiota and serum metabolites of calves is currently unclear. Objective: The aim of this study is to investigate the changes in the gut microbiota and serum metabolites in calves after rumen acidosis and analyse the correlation. Methods: Eight calves were selected as the rumen acidosis group, and eight health calves were selected as the healthy group. The faecal gut microbiota and serum metabolites of calves were detected respectively using 16S rDNA high-throughput sequencing and non-target metabolomics. The correlation between gut microbiota and serum metabolites was analyzed by Spearman correlation analysis. Results: Differential analysis of the diversity and composition of gut microbiota between eight male healthy (Health) and eight male rumen acidosis (Disease) calves revealed that rumen acidosis increased the abundance of the gut microbiota in calves. At the phylum level, compared to the Healthy group, the relative abundance of Proteobacteria in the Disease group significantly decreased (P<0.05), while the relative abundance of Desulfobacterota significantly increased in the Disease group (P<0.05). At the genus level, compared to the Disease group, the relative abundance of Alloprevotella, Muribaculaceae, Succinivibrio, Prevotella, Agathobacter and Parabacteroides significantly increased in the Healthy group (P<0.05), while the relative abundance of Christensenellaceae_R-7 and Monoglobus significantly decreased in the Healthy group (P<0.05). Differential analysis results showed the Healthy group had 23 genera with higher abundance, while the Disease group had 47 genera with higher abundance. Serum metabolomics results revealed the differential metabolites associated with rumen acidosis, including nicotinamide, niacin, L-glutamic acid and carnosine, were mainly enriched in the nicotinate and nicotinamide pathway and the histidine pathway. Conclusion: The occurrence of rumen acidosis can induce changes in the gut microbiota of calves, with a significant increase of the Christensenellaceae_R-7 genus and a significant decrease of Prevotella and Succinivibrio genera. In addition, the occurrence of rumen acidosis can also induce changes in serum metabolites including niacin, niacinamide, L-glutamine, and carnosine, which may serve as the diagnostic biomarkers of rumen acidosis of calves.

Prediction of Potential Risk for Flupyradifurone and Its Transformation Products to Hydrobionts.

Flupyradifurone (FPF) is considered the latest generation of neonicotinoid insecticides. Here, we investigated the toxicity and ecological risk of FPF and its aerobic transformation products (TPs) to aquatic species using the method of prediction. We found that FPF exhibited moderate or high toxicity to some aquatic species. The 5% hazardous concentration of FPF was 3.84 µg/L for aquatic organisms. We obtained 91 aerobic TPs for FPF, and almost half of FPF TPs exhibited toxicity to fish or Daphnia. Eleven of the TPs of FPF exhibited a high or moderate risk to aquatic ecosystems. All FPF TPs with high and moderate risks contained a 6-chloropyridine ring structure, indicating that the derivant of a pyridine ring exhibits potential risks to aquatic ecosystems. Our results provide insight into the potential risk of FPF to aquatic ecosystems and could be used to help set criteria to control pollution caused by FPF.

Analysis of Different Early Strength Agents on the Performance of Prefabricated UHPC.

Precast ultra-high-performance concrete (UHPC) has emerged as indispensable in the engineering sector due to its cost-effectiveness and superior performance. Currently, precast UHPC grapples with challenges pertaining to slow setting times and insufficient early strength, largely attributed to its high water-reducing agent content. Effective utilization of early strength agents to augment UHPC's early strength is pivotal in addressing this issue. This study investigates the efficacy of two distinct concrete early strength agents, namely calcium formate (Ca(HCO2)2) and aluminum sulfate (Al2(SO4)3). A UHPC system with a water/cement ratio of 0.17 was used; both single and compound doping experiments were conducted using varied dosages of the aforementioned early strength agents. Our results show that both early strength agents significantly reduce setting time and enhance early strength at appropriate dosages. Specifically, the addition of 0.3% Ca(HCO2)2 led to a 33.07% decrease in setting time for UHPC. Moreover, the incorporation of 0.3% Ca(HCO2)2 and 0.5% Al2(SO4)3 resulted in a strength of 81.9 MPa at 1.5 days, representing a remarkable increase of 118.4%. It is noteworthy that excessive use of Ca(HCO2)2 inhibits the hydration process, whereas an abundance of Al2(SO4)3 diminishes the early strength effect. Simultaneously, this article provides recommendations regarding the dosage of two distinct early strength agents, offering a novel solution for expediting the production of prefabricated UHPC with a low water/cement ratio and high water-reducing agent content.

MXene Sediment-Based Poly(vinyl alcohol)/Sodium Alginate Aerogel Evaporator with Vertically Aligned Channels for Highly Efficient Solar Steam Generation.

Solar-driven interfacial evaporation from seawater is considered an effective way to alleviate the emerging freshwater crisis because of its green and environmentally friendly characteristics. However, developing an evaporator with high efficiency, stability, and salt resistance remains a key challenge. MXene, with an internal photothermal conversion efficiency of 100%, has received tremendous research interest as a photothermal material. However, the process to prepare the MXene with monolayer is inefficient and generates a large amount of "waste" MXene sediments (MS). Here, MXene sediments is selected as the photothermal material, and a three-dimensional MXene sediments/poly(vinyl alcohol)/sodium alginate aerogel evaporator with vertically aligned pores by directional freezing method is innovatively designed. The vertical porous structure enables the evaporator to improve water transport, light capture, and high evaporation rate. Cotton swabs and polypropylene are used as the water channel and support, respectively, thus fabricating a self-floating evaporator. The evaporator exhibits an evaporation rate of 3.6 kg m-2 h-1 under one-sun illumination, and 18.37 kg m-2 of freshwater is collected in the condensation collection device after 7 h of outdoor sun irradiation. The evaporator also displays excellent oil and salt resistance. This research fully utilizes "waste" MS, enabling a self-floating evaporation device for freshwater collection.

A multi-dimensional photodetector based on an α-MoO3 grating and graphene.

Integration of multi-dimensional optical information enhances the recognition and anti-interference capabilities of the detection system, allowing for better adaptation to complex environments. Therefore, this technology represents a crucial developmental pathway for the future of infrared optical detectors. In this study, a dual-band polarization photodetector based on a two-dimensional α-MoO3 grating structure is proposed. The structure utilizes the special dispersion property of the α-MoO3 material to excite the localized plasmon resonance, which generates narrowband high absorption peaks with Q-factors as high as 110.24 and 92.65, with peaks close to 1 under TM and TE polarized waves, respectively. The direct measurement of multi-dimensional optical information including intensity, spectrum and polarization states is realized. By adjusting the structural parameters, polarization-dependent dual-band detection can be achieved. Meanwhile, the introduction of graphene material realizes the electronically tunable function of the device. This study provides unexplored strategies for realizing more efficient, flexible and versatile dual-band polarization wave detection.

Uptake and Biotransformation of Guvermectin in Three Crops after In Vivo and In Vitro Exposure.

Guvermectin, as a novel nucleoside-like biopesticide, could increase the rice yield excellently, but the potential environmental behaviors remain unclear, which pose potential health risks. Therefore, the uptake and biotransformation of guvermectin in three types of crops (rice, lettuce, and carrot) were first evaluated with a hydroponic system. Guvermectin could be rapidly absorbed and reached equilibrium in roots (12-36 h) and shoots (24-60 h) in three plants, and guvermectin was also vulnerable to dissipation in roots (t1/2 1.02-3.65 h) and shoots (t1/2 9.30-17.91 h). In addition, 8 phase I and 2 phase II metabolites, transformed from guvermectin degradation in vivo and in vitro exposure, were identified, and one was confirmed as psicofuranine, which had antibacterial and antitumor properties; other metabolites were nucleoside-like chemicals. Molecular simulation and quantitative polymerase chain reaction further demonstrated that guvermectin was metabolized by the catabolism pathway of an endogenous nucleotide. Guvermectin had similar metabolites in three plants, but the biotransformation ability had a strong species dependence. In addition, all the metabolites exhibit neglectable toxicities (bioconcentration factor <2000 L/kg b.w., LC50,rat > 5000 mg/kg b.w.) by prediction. The study provided valuable evidence for the application of guvermectin and a better understanding of the biological behavior of nucleoside-like pesticides.

Residue changes, degradation, processing factors and their relation between physicochemical properties of pesticides in peanuts during multiproduct processing.

This study systematically investigates the residue changes, processing factors (PFs), and relation between the physicochemical properties of pesticides during peanut processing. Results revealed that peeling, washing, and boiling treatments removed partial or substantial pesticide residues from peanuts with PFs of 0.29-1.10 (most <1). By contrast, pesticides appeared to be partially concentrated during roasting, stir-frying, and deep-frying peanuts with PFs of 0.16-1.25. During oil pressing, 13 of the 28 pesticides were concentrated in the peanut oil (PF range: 1.06-2.01) and 25 of the pesticides were concentrated in the peanut meal (1.07-1.46). Physicochemical parameters such as octanol-water partition coefficient, degradation point, molecular weight, and melting point showed significant correlations with PFs during processing. Notably, log Kow exhibited strong positive correlations with the PFs of boiling, roasting, and oil pressing. Overall, this study describes the fate of pesticides during multiproduct processing, providing guidance to promote the healthy consumption of peanuts for human health.

Residue levels, processing factors and risk assessment of pesticides in ginger from market to table.

Ginger is consumed as a spice and medicine globally. However, pesticide residues in ginger and their residue changes during processing remain poorly understood. Our results demonstrate that clothianidin, carbendazim and imidacloprid were the top detected pesticides in 152 ginger samples with detection rates of 17.11-27.63%, and these pesticides had higher average residues of 44.07-97.63 µg/kg. Although most samples contained low levels of pesticides, 66.45% of the samples were detected with pesticides, and 38.82% were contaminated with 2-5 pesticides. Peeling, washing, boiling and pickling removed different amounts of pesticides from ginger (processing factor range: 0.06-1.56, most <1). By contrast, pesticide residues were concentrated by stir-frying and drying (0.50-6.45, most >1). Pesticide residues were influenced by pesticide physico-chemical parameters involving molecular weight, melting point, degradation point and octanol-water partition coefficient by different ginger processing methods. Chronic and acute dietary risk assessments suggest that dietary exposure to pesticides from ginger consumption was within acceptable levels for the general population. This study sheds light on pesticide residues in ginger from market to processing and is of theoretical and practical value for ensuring ginger quality and safety.

A sensitive fluoroimmunoassay for quantitative detection of imidacloprid based on quantum dot-streptavidin conjugate.

Imidacloprid (IMI), the most commonly used neonicotinoid, is widely present in both the environment and agro-products due to extensive and prolonged application, posing potential risks to ecological security and human health. This study introduced a sensitive and rapid fluorescence-linked immunosorbent assay, employing Quantum Dot-Streptavidin conjugate (QDs-SA-FLISA), for efficient monitoring of IMI residues in agro-products. Under optimized conditions, the QDs-SA-FLISA exhibited a half-maximal inhibition concentration (IC50) of 1.70 ng/mL and a limit of detection (LOD, IC20) of 0.5 ng/mL. Investigation into the sensitivity enhancement effect of the QDs-SA revealed that the sensitivity (IC50) of the QDs-SA-FLISA was 7.3 times higher than that of ELISA. The recoveries and relative standard deviation (RSD) ranged from 81.7 to 118.1 % and 0.5-9.4 %, respectively, for IMI in brown rice, tomato and pear. There was no significant difference in IMI residues obtained between QDs-SA-FLISA and UHPLC-MS/MS. Thus, the QDs-SA-FLISA represents a reliable approach for the quantitative determination of IMI in agro-products.

A tungsten-based metamaterial emitter for solar thermophotovoltaic systems.

Solar thermophotovoltaic systems are capable of showing efficient photoelectric conversion and are expected to surpass the Shockley-Queisser limit, owing to the spectrum-selective functionality of metamaterial selective emitters. Generally, metamaterial emitters are manufactured from multifarious materials, which also makes their manufacturing process complicated. Here, we propose a tungsten-only emitter composed of two rectangular bars with different widths and heights arranged in a cruciform structure, featuring a rectangular cavity at the top. Results from the simulations reveal that the emissivity of the metamaterial emitter exceeds 90% at the wavelength of 950-1590 nm and drops below 20% for wavelengths exceeding 2025 nm, which can effectively match GaSb photovoltaic cells. The outstanding emission performance is attributed to the coupling effect of surface plasmon resonance, cavity resonance and guided mode resonance, as evidenced by the analysis of electric and magnetic fields. We also explored the radiation spectrum in the 500-2500 K temperature range and found that it performed best at 1400 K. It is concluded that the emission performance is slightly affected by structural parameters and angles. This study presents a meaningful exploration of efficient solar utilization.

Remodeling Microenvironment for Implant-Associated Osteomyelitis by Dual Metal Peroxide.

Implant-associated osteomyelitis (IAOM) is characterized by bone infection and destruction; current therapy of antibiotic treatment and surgical debridement often results in drug resistance and bone defect. It is challenging to develop an antibiotic-free bactericidal and osteogenic-enhanced strategy for IAOM. Herein, an IAOM-tailored antibacterial and osteoinductive composite of copper (Cu)-strontium (Sr) peroxide nanoparticles (CSp NPs), encapsulated in polyethylene glycol diacrylate (PEGDA) (CSp@PEGDA), is designed. The dual functional CSp NPs display hydrogen peroxide (H2O2) self-supplying and Fenton catalytic Cu2+ ions' release, generating plenty of hydroxyl radical (•OH) in a pH-responsive manner for bacterial killing, while the released Sr2+ promotes the in vitro osteogenicity regarding cell proliferation, alkaline phosphatase activity, extracellular matrix calcification, and osteo-associated genes expression. The integration of Cu2+ and Sr2+ in CSp NPs together with the coated PEGDA hydrogel ensures the stable and sustainable ion release during short- and long-term periods. Benefitted from the injectablity and photo-crosslink ability, CSp@PEGDA is able to thoroughly fill the infectious site and gelate in situ for bacterial elimination and bone regeneration, which is verified through in vivo evaluation using a clinical-simulating IAOM mouse model. These favorable abilities of CSp@PEGDA precisely meet the multiple therapeutic needs and pave a promising way for implant-associated osteomyelitis treatment.

Young human plasma-derived extracellular vesicles rescue and reactivate IL-1ß and TNF-α treated chondrocytes.

Osteoarthritis (OA) is a degenerative disease that affects millions of individuals worldwide. Despite its prevalence, the exact causes and mechanisms behind OA are still not fully understood, resulting in a lack of effective treatments to slow down or halt disease progression. Recent research has discovered that extracellular vesicles (EVs) present in the circulation of young mice have a remarkable ability to activate musculoskeletal stem cells in elderly mice. Conversely, EVs derived from elderly mice do not exhibit the same potential, indicating that EVs obtained from young individuals may hold promise to activate aging cells in degenerative tissue. However, it remains unknown whether EVs derived from young individuals can also address cartilage degeneration caused by aging. In this study, we first evaluated EVs derived from young human plasma (YEVs) and EVs derived from old human plasma (OEVs) in an in vitro experiment using chondrocytes. The results revealed that YEVs effectively stimulated chondrocyte proliferation and migration, while OEVs from old plasma did not exhibit a similar effect. Given that OA represents a more complex inflammatory microenvironment, we further determine whether the benefits of YEVs on chondrocytes can be maintained in this context. Our findings indicate that YEVs have the ability to positively regulate chondrocyte function and protect them against apoptosis induced by IL-1ß and TNF-α in an in vitro OA model. Furthermore, we discovered that lyophilized EVs could be stored under mild conditions without any alterations in their physical characteristics. Considering the exceptional therapeutic effects and the wide availability of EVs from young plasma, they hold significant promise as a potential approach to activate chondrocytes and promote cartilage regeneration in early-stage OA.

Greenhouse cultivation enhances pesticide bioaccumulation in cowpeas following repeated spraying.

Understanding pesticide residue patterns in crops is important for ensuring human health. However, data on residue accumulation and distribution in cowpeas grown in the greenhouse and open field are lacking. Our results suggest that acetamiprid, chlorantraniliprole, cyromazine, and thiamethoxam residues in greenhouse cowpeas were 1.03-15.32 times higher than those in open field cowpeas. Moreover, repeated spraying contributed to the accumulation of pesticide residues in cowpeas. Clothianidin, a thiamethoxam metabolite, was detected at 1.04-86.00 µg/kg in cowpeas. Pesticide residues in old cowpeas were higher than those in tender cowpeas, and the lower half of the plants had higher pesticide residues than did the upper half. Moreover, pesticide residues differed between the upper and lower halves of the same cowpea pod. Chronic and acute dietary risk assessments indicated that the human health risk was within acceptable levels of cowpea consumption. Given their high residue levels and potential accumulation, pesticides in cowpeas should be continuously assessed.

Coupling polaritons in near-field radiative heat transfer between multilayer graphene/vacuum/α-MoO3/vacuum heterostructures.

Both materials and structures can significantly affect radiative heat transfer, which is more pronounced in the near-field regime of two-dimensional and hyperbolic materials, and has promising prospects in thermophotovoltaics, radiative cooling, and nanoscale metrology. Hence, it is important to investigate the near-field radiative heat transfer (NFRHT) in complicated heterostructures consisting of two-dimensional and hyperbolic materials. Recent studies have reported that adding vacuum layers to multilayer structures can effectively enhance the NFRHT. Take the case of multilayer graphene/α-MoO3 heterostructures: the effect of vacuum layers on these heterostructures has not been studied, and hence investigations on adding vacuum layers between graphene and α-MoO3 layers should be emphasized. In this work, we conduct an investigation of the NFRHT between multilayer graphene/vacuum/α-MoO3/vacuum heterostructures. Compared to unit graphene/α-MoO3 heterostructures without vacuum layers, it is found that NFRHT between the heterostructures with vacuum layers can be suppressed to 49.1% when the gap distance is 10 nm, and can be enhanced to 16.3% when the gap distance is 100 nm. These phenomena are thoroughly explained by the coupling of surface plasmon polaritons and hyperbolic phonon polaritons. Energy transmission coefficients and spectral heat flux are analysed during the calculations changing chemical potentials of graphene, thicknesses of vacuum layers, and α-MoO3 layers. This study is expected to provide guidance in implementing the thermal management of reasonable NFRHT devices based on graphene/α-MoO3 heterostructures.

Simultaneous determination of 27 pesticides in corn and cow matrices by ultra-performance liquid chromatography-tandem mass spectrometry.

In this paper, we developed a sensitive UPLC-MS/MS method to determine pesticide residues in plant matrices (corn, fresh corn, fresh corn stover, old corn stover, and corn silage) and animal matrices (beef, fat, milk, milk fat, kidney, liver, and cow stomach) quantitatively. Twenty-seven pesticides were extracted with acetonitrile from all plant and animal matrices separately and purified with a mixture of primary secondary amine (PSA) and graphitized carbon black (GCB) or octadecylsilane (C18). The average recoveries of these compounds ranged from 60.7% to 118.2%, and the relative standard deviations were less than 20.0%. The limit of quantitation for all compounds was 0.01 mg kg-1 (for cyhalothrin and beta cypermethrin the LOQ was 0.02 mg kg-1). The establishment of multi-residue analysis methods for a variety of matrices can be used as a database for future method research. The results of this study are essential for calculating the transfer of pesticide residues from feed to animal products and for monitoring food safety, which will protect people's health and safety.

The fate of mycotoxins in oranges during storage and processing.

To evaluate the safety of orange consumption induced by mycotoxins, 'Newhall' navel oranges were artificially inoculated with P. expansum and A. tenuissima, followed by an evaluation of the distribution and migration patterns of corresponding mycotoxins (patulin [PAT], tentoxin [Ten], altenuene [ALT], alternariol monomethyl ether [AME], alternariol [AOH] and tenuazonic acid [TeA]) during orange storage and processing. The concentration of mycotoxins decreased as the increase of distance from the lesion, and mycotoxins could be detected throughout the orange when the lesion extended to 8 mm in diameter. AOH and AME pose the primary source of dietary risk with high concentrations and low thresholds of toxicological concern. Orange juice and pectin processing could remove 43.4-98.7% of mycotoxins, while tangerine peelprocessing might lead to significant enrichment of mycotoxins with the processing factors (PFs) of 2.8-3.5. The findings may offer scientific insights into mitigating the dietary risk of mycotoxin exposure from oranges and their derivatives.

Comparative analysis of two models for phonon polaritons in van der Waals materials: 2D and 3D.

Phonon polaritons with ultralow losses and high confinement in extremely anisotropic media have opened up new avenues for manipulating the flow of light at the nanoscale. Recent advances in var der Waals (vdW) materials reveal unprecedented dispersion characteristics of polaritons using a two-dimensional (2D) model, treating the slab as a surface without thickness. However, the difference between the 2D and three-dimensional (3D) models of hyperbolic polaritons remains largely unexplored. Herein, we compare the polaritonic difference between these two models for biaxial vdW slabs. In addition, we demonstrate that the fundamental mode in slab configuration corresponds to the polaritonic mode in surface sheet and higher-order modes vanish in the latter configuration. In particular, we reveal that the difference in in-plane polaritons along the [100] and [001] crystal directions between the two models is associated with the inverse of the dielectric function along these two directions. For example, we compare the near-field radiative heat transfer (NFRHT) between two vdW slabs based on these two models. It is found that when the attenuation length of the higher-order hyperbolic mode is less than the gap distance, the enhancement achieved using the 3D model comes from only the fundamental mode, resulting in a negligible difference between these two models. Therefore, our findings may help to understand in-plane anisotropic polaritons and provide guidance for the application of the 2D model in the analysis of vdW materials.

Rational understanding of chiral fungicide penthiopyrad stereoselectivity: Bioactivity, aquatic toxicity and cytotoxicity.

Penthiopyrad is a novel chiral succinate dehydrogenase inhibitor (SDHI) fungicide with two enantiomers. However, enantioselective information on the biological activity, nontarget organisms and human health risk of penthiopyrad is not comprehensive, which may cause inaccurate risk assessment. In this study, the enantioselective bioactivity to three kinds of phytopathogens (Rhizoctonia solani, Botrytis cinerea and Sclerotinia sclerotiorum) was first disclosed, and the antifungal activity of S-(+)-penthiopyrad was higher than that of R-(-)-penthiopyrad by 12-37 times. Moreover, its enantioselective toxicity to Raphidocelis subcapitata and Daphnia magna was also clarified, and the order of toxicity was S-(+)-penthiopyrad > rac-penthiopyrad >R-(-)-penthiopyrad, with 1.8- and 5.3-fold differences between the two enantiomers. Furthermore, the enantioselectivity of penthiopyrad on HepG2 cytotoxicity was studied. The data showed that the cytotoxicity of S-(+)-penthiopyrad was 1.8 times higher than that of R-(-)-penthiopyrad, and S-(+)-penthiopyrad had a stronger impact on cell proliferation, oxidative stress and lipid peroxidation. In summary, due to the enantioselectivity of the activity and toxicity of the chiral pesticide, the efficacy and risk evaluation of penthiopyrad should be considered at the enantiomer level.

A polarization-dependent perfect absorber with high Q-factors enabled by Tamm phonon polaritons in hyperbolic materials.

As a natural biaxial hyperbolic material, α-phase molybdenum trioxide (α-MoO3) is highly anisotropic, making it an ideal candidate for polarization-dependent devices. Herein, using a Tamm configuration where one-dimensional photonic crystal is coated on an α-MoO3 substrate separated by a dielectric interlayer, we demonstrate the perfect absorption effect in the mid-infrared band governed by Tamm phonon polaritons. The resultant absorption peak exhibits an ultra-narrow bandwidth due to the polaritonic resonance with a high quality factor of up to 181. By varying the thickness of the interlayer, we demonstrate that near-unity absorption resonances can be tuned to a wider range of wavelengths. In addition, due to the in-plane anisotropy of α-MoO3, the device exhibits an outstanding polarization-dependent absorption performance, rendering it highly useful for various applications. Also, we show that the electronic tunability of the device is through addition of a graphene monolayer. These excellent results suggest that the designed structure could be promising in applications such as infrared absorbers, polarization detectors, sensors and energy harvesting devices.

Enhanced chirality induced in a composite structure consisting of α-MoO3 film and a silver metasurface.

Chiral structures have been widely used in many fields, such as biosensing and analytical chemistry. In this paper, the chiral response of a composite structure consisting of α-M o O 3 film and a silver (Ag) metasurface is studied. First, the effect of the thickness of α-M o O 3 film on the circular dichroism (CD) is discussed, and it is found that CD can reach 0.93 at a wavelength of 9.6 µm when the thickness of α-M o O 3 film is 6.075 µm. To better understand the physical mechanism, we analyze the transverse electric and transverse magnetic wave components in the transmitted wave for the whole structure and each layer. One can see that the strong chirality of the structure is attributed to the polarization conversion of α-M o O 3 film and the selective transmissivity of Ag ribbons. In addition, the influence of the filling factor of the Ag ribbons on chirality is also studied. This work combines hyperbolic material α-M o O 3 with Ag ribbons to enhance CD. Also, it provides greater freedom in the tuning of chirality. We believe that this work not only deepens the understanding of the chiral response of anisotropic materials, but also gives promise for its applications in the fields of polarization optics and biosensing.