RESUMEN
An oxidant-controlled divergent synthesis of a pyrrolidone fused pyrimido[1,2-b]indazole skeleton was developed through selective cyclization of an in situ generated enone intermediate and 1H-indazol-3-amine. The one-pot, metal-free process formed three C-N bonds, one C-C bond, and a tetrasubstituted carbon stereocenter containing a hydroxyl group. This method not only allowed for the synthesis of over 60 new pyrrolidone fused pyrimido[1,2-b]indazole derivatives, but was also compatible with the transformation of complex active molecules and the derivation of target products. Significantly, product 4q exhibited aggregation-induced emission (AIE) characteristics without any further modification.
RESUMEN
Electrocatalytic oxidation of alcohols using heterogeneous catalysts is a promising aqueous, energy-efficient and environmentally friendly approach, especially for coupling different alcohols to prolong the carbon chain via co-oxidation. Precisely regulating critical steps to tailor electrode materials and electrolyte composition is key to selectively coupling alcohols for targeted synthesis. However, selectively coupling different alcohols remains challenging due to the lack of effective catalyst and electrolyte design promoting specific pathways. Herein, we demonstrate a paired electrolysis strategy for combining anodic oxidative coupling of ethanol (EtOH) and benzyl alcohol (PhCH2OH) to synthesize cinnamaldehyde (CAL) and cathodic ammonia production. The strategies involve: (i) utilizing the salt-out effect to balance selective oxidation and coupling rates; (ii) developing platinum-loaded nickel hydroxide electrocatalysts to accelerate intermediate coupling kinetics; (iii) introducing thermodynamically favorable nitrate reduction at the cathode to improve coupling selectivity by avoiding hydrogenation of products while generating valuable ammonia instead of hydrogen. We achieved 85% coupling selectivity and 278 µmol/h NH3 productive rate at 100 mA/cm2 with a low energy input (â¼1.63 V). The membrane-free, low energy, scalable approach with a wide substrate scope highlights promising applications of this methodology. This work advances heterogeneous electrocatalytic synthesis through rational design principles that integrate anodic oxidative coupling with cathodic nitrate reduction reactions, having synergistic effects on efficiency and selectivity.
RESUMEN
An unconventional [1 + 1 + 1 + 1 + 1 + 1] annulation process was developed for the construction of ß,ß-dithioketones by merging C-C and C-S bond cleavage. In this reaction, rongalite concurrently served as triple C1 units, dual sulfur(II) synthons, and a reductant for the first time. Mechanism investigation indicated that the reaction involved the self-mediated valence state change of rongalite. By performing this step-economical method, the challenging construction of C5-substituted 1,3-dithiane can be achieved under mild and simple conditions.
RESUMEN
The 3-dimensional (3D) modeling of crop canopies is fundamental for studying functional-structural plant models. Existing studies often fail to capture the structural characteristics of crop canopies, such as organ overlapping and resource competition. To address this issue, we propose a 3D maize modeling method based on computational intelligence. An initial 3D maize canopy is created using the t-distribution method to reflect characteristics of the plant architecture. The subsequent model considers the 3D phytomers of maize as intelligent agents. The aim is to maximize the ratio of sunlit leaf area, and by iteratively modifying the azimuth angle of the 3D phytomers, a 3D maize canopy model that maximizes light resource interception can be constructed. Additionally, the method incorporates a reflective approach to optimize the canopy and utilizes a mesh deformation technique for detecting and responding to leaf collisions within the canopy. Six canopy models of 2 varieties plus 3 planting densities was constructed for validation. The average R2 of the difference in azimuth angle between adjacent leaves is 0.71, with a canopy coverage error range of 7% to 17%. Another 3D maize canopy model constructed using 12 distinct density gradients demonstrates the proportion of leaves perpendicular to the row direction increases along with the density. The proportion of these leaves steadily increased after 9 × 104 plants ha-1. This study presents a 3D modeling method for the maize canopy. It is a beneficial exploration of swarm intelligence on crops and generates a new way for exploring efficient resources utilization of crop canopies.
RESUMEN
An efficient synthetic method for constructing 2,3- and 2,4-disubstituted pyrimidio[1,2-b]indazole skeletons through I2-DMSO-mediated and substrate-controlled regioselective [4 + 2] cyclization is reported. The reaction conditions are mild, its operation is simple, and the substrate scope is wide. More than 60 pyrimidio[1,2-b]indazole derivatives have been synthesized, providing a new methodology for constructing related molecules and potentially enriching bioactive-molecule libraries.
RESUMEN
Aqueous electrochemical coupling reactions, which enable the green synthesis of complex organic compounds, will be a crucial tool in synthetic chemistry. However, a lack of informed approaches for screening suitable catalysts is a major obstacle to its development. Here, we propose a pioneering electrochemical reductive coupling reaction toward direct electrosynthesis of oxime from NOx and aldehyde. Through integrating experimental and theoretical methods, we screen out the optimal catalyst, i.e., metal Fe catalyst, that facilitates the enrichment and C-N coupling of key reaction intermediates, all leading to high yields (e.g., â¼99% yield of benzaldoxime) for the direct electrosynthesis of oxime over Fe. With a divided flow reactor, we achieve a high benzaldoxime production of 22.8 g h-1 gcat-1 in â¼94% isolated yield. This work not only paves the way to the industrial mass production of oxime via electrosynthesis but also offers references for the catalyst selection of other electrochemical coupling reactions.
RESUMEN
5-Hydroxymethylfurfural (HMF), one of the essential C6 biomass derivatives, has been deeply investigated in electrocatalytic reduction upgrading. Nevertheless, the high product selectivity and rational design strategy of electrocatalysts for electrocatalytic HMF reduction is still a challenge. Here, a high selective electro-reduction of HMF to dimethylfuran (DMF) on palladium (Pd) single atom loaded on titanium dioxide (Pd SA/TiO2 ) via hydrogen spillover and adsorption configuration adjustment in neutral electrolytes is achieved. Combining density functional theory calculations and in situ characterization, it is revealed that Pd single atom could weaken the interaction between Pd atoms and adsorbed hydrogen (*H) to promote the *H spillover for increasing *H coverage on the surface and maintain the tilted adsorption configuration to activate CâO bond; thus the selectivity of DMF on Pd SA/TiO2 increases to 90.33%. Besides, it is elaborated that low *H coverage on TiO2 favors the formation of bis(hydroxymethyl)hydro-furoin (BHH), and the flat adsorption configuration of HMF on Pd nanoparticles benefits to form 2,5-dihydroxymethylfuran (DHMF). This work provides a promising approach for modifying electrocatalysts to realize the selective electroreduction of HMF to value-added products.
RESUMEN
Owing to outstanding performances, nickel-based electrocatalysts are commonly used in electrochemical alcohol oxidation reactions (AORs), and the active phase is usually vacancy-rich nickel oxide/hydroxide (NiOx Hy ) species. However, researchers are not aware of the catalytic role of atom vacancy in AORs. Here, we study vacancy-induced catalytic mechanisms for AORs on NiOx Hy species. As to AORs on oxygen-vacancy-poor ß-Ni(OH)2 , the only redox mediator is electrooxidation-induced electrophilic lattice oxygen species, which can only catalyze the dehydrogenation process (e.g., the electrooxidation of primary alcohol to carboxylic acid) instead of the C-C bond cleavage. Hence, vicinal diol electrooxidation reaction involving the C-C bond cleavage is not feasible with oxygen-vacancy-poor ß-Ni(OH)2 . Only through oxygen vacancy-induced adsorbed oxygen-mediated mechanism, can oxygen-vacancy-rich NiOx Hy species catalyze the electrooxidation of vicinal diol to carboxylic acid and formic acid accompanied with the C-C bond cleavage. Crucially, we examine how vacancies and vacancy-induced catalytic mechanisms work during AORs on NiOx Hy species.
RESUMEN
Methanol steam reforming (MSR) provides an alternative way for efficient production and safe transportation of hydrogen but requires harsh conditions and complicated purification processes. In this work, an efficient electrochemical-assisted MSR reaction for pure H2 production at lower temperature (~140 °C) is developed by coupling the electrocatalysis reaction into the MSR in a polymer electrolyte membrane electrolysis reactor. By electrochemically assisted, the two critical steps including the methanol dehydrogenation and water-gas shift reaction are accelerated, which is attributed to decreasing the methanol dehydrogenation energy and promoting the dissociation of H2 O to OH* by the applied potential. Furthermore, the reduced H2 partial pressure by the hydrogen oxidation and reduction process further promotes MSR. The combination of these advantages not only efficiently decreases the MSR temperature but also achieves the high rate of hydrogen production of 505â mmol H2 g Pt -1 h-1 with exceptionally high H2 selectivity (99 %) at 180 °C and a low voltage (0.4â V), and the productivity is about 30-fold than that of traditional MSR. This study opens up a new avenue to design novel electrolysis cells for hydrogen production.
RESUMEN
An I2-DMSO-mediated multicomponent [3+1+2] cascade annulation reaction using aryl methyl ketones, enaminones, and benzo[d]isoxazol-3-amine as substrates has been developed. This metal-free reaction involved the transannulation of benzo[d]isoxazol-3-amines with the formation of two C-N bonds and a C-C bond in one pot. Notably, a pyrimidine ring with a 1,4-dicarbonyl scaffold could efficiently transform into a pyrimido[4,5-d]pyridazine skeleton. The phenolic hydroxyl group of the target product could undergo further modification with pharmaceuticals, demonstrating the utility of this method.
RESUMEN
A novel multicomponent cascade cyclization reaction in one pot for the preparation of pyrido[3,2-a]phenoxazin-5-ones from simple o-aminophenols, paraformaldehyde, and enaminones has been established. It is noteworthy that o-aminophenol plays multiple roles serving as both a bis-nucleophile and an iminoquinone precursor, which can in situ generate aminophenoxazinones to undergo the Povarov reaction for the first time to yield pyrido[3,2-a]phenoxazin-5-ones with a high efficiency. Moreover, the photoluminescence of pyrido[3,2-a]phenoxazin-5-ones has polarity sensitivity and features aggregation-induced emission (AIE) characteristics, which is promising for bioimaging and theranostic applications.
RESUMEN
2-Hydroxy-4-morpholin-2,5-diarylfuran-3(2H)-one derivatives were constructed sequentially using iodine and zinc dust from simple and readily available methyl ketone and morpholine as the starting materials. Under mild conditions, C-C, C-N, and C-O bonds formed in a one-pot synthesis. A quaternary carbon center was successfully constructed, and the active drug fragment morpholine was introduced into the molecule.
Asunto(s)
Carbono , Yodo , Reacción de Cicloadición , Acetona , Yodo/química , Morfolinas , Cetonas/químicaRESUMEN
The low-potential furfural oxidation reaction (FFOR) on a Cu-based electrocatalyst can produce H2 at the anode, thereby providing a bipolar H2 production system with an ultralow cell voltage. However, the intrinsic activity and stability of the Cu-based electrocatalyst for the FFOR remain unsatisfactory for practical applications. This study investigates the correlation between the valence state and the adsorption behavior of the Cu-based electrocatalyst in furfural oxidation. Cu0 is the adsorption site with low intrinsic activity. Cu+ , which exists in the form of Cu(OH)ads in alkaline electrolytes, has no adsorption ability but can improve the performance of Cu0 by promoting the adsorption of FF. Moreover, a mixed-valence Cu-based electrocatalyst (MV Cu) with high intrinsic activity and stability is prepared electrochemically. With the MV Cu catalyst, the assembled dual-side H2 production electrolyzer has a low electricity requirement of only 0.24 kWh mH2 -3 at an ultralow cell voltage of 0.3 V, and it exhibits sufficient stability. This study not only correlates the valence state with the adsorption behavior of the Cu-based electrocatalyst for the low-potential FFOR with anodic H2 production but also reveals the mechanism of deactivation to provide design principles for Cu-based electrocatalysts with satisfactory stability.
RESUMEN
Aqueous organic electrosynthesis such as nucleophile oxidation reaction (NOR) is an economical and green approach. However, its development has been hindered by the inadequate understanding of the synergy between the electrochemical and non-electrochemical steps. In this study, we unravel the NOR mechanism for the primary alcohol/vicinal diol electrooxidation on NiO. Thereinto, the electrochemical step is the generation of Ni3+-(OH)ads, and the spontaneous reaction between Ni3+-(OH)ads and nucleophiles is an electrocatalyst-induced non-electrochemical step. We identify that two electrophilic oxygen-mediated mechanisms (EOMs), EOM involving hydrogen atom transfer (HAT) and EOM involving C-C bond cleavage, play pivotal roles in the electrooxidation of primary alcohol to carboxylic acid and the electrooxidation of vicinal diol to carboxylic acid and formic acid, respectively. Based on these findings, we establish a unified NOR mechanism for alcohol electrooxidation and deepen the understanding of the synergy between the electrochemical and non-electrochemical steps during NOR, which can guide the sustainable electrochemical synthesis of organic chemicals.
RESUMEN
Synthesis of cyclohexanone oxime via the cyclohexanone-hydroxylamine process is widespread in the caprolactam industry, which is an upstream industry for nylon-6 production. However, there are two shortcomings in this process, harsh reaction conditions and the potential danger posed by explosive hydroxylamine. In this study, we presented a direct electrosynthesis of cyclohexanone oxime using nitrogen oxides and cyclohexanone, which eliminated the usage of hydroxylamine and demonstrated a green production of caprolactam. With the Fe electrocatalysts, a production rate of 55.9â g h-1 gcat -1 can be achieved in a flow cell with almost 100 % yield of cyclohexanone oxime. The high efficiency was attributed to their ability of accumulating adsorbed hydroxylamine and cyclohexanone. This study provides a theoretical basis for electrocatalyst design for C-N coupling reactions and illuminates the tantalizing possibility to upgrade the caprolactam industry towards safety and sustainability.
RESUMEN
A [3 + 1 + 2] cyclization-rearrangement reaction scheme was developed to synthesize pyrimido[1,2-b]indazoles from aryl methyl ketones, 3-aminoindazoles, and gem-diarylethenes. This metal-free process proceeds via a sequential aza-Diels-Alder reaction and Wagner-Meerwein rearrangement, and a possible reaction mechanism was demonstrated based on control experiments. This method exhibits good substrate compatibility and allows simple reaction conditions. Moreover, the products display significant aggregation-induced emission characteristics after simple modifications.
RESUMEN
A concise and efficient hydrodefluorination process was developed for the synthesis of gem-difluoroalkenes. This reaction employs rongalite as a masked proton source and does not require any additional catalysts or reductants. Notably, trifluoromethyl alkenes having both terminal and internal double bonds are compatible with this process, allowing for a wider range of substrates. The successful late-stage functionalizations of pharmaceuticals and gram-scale syntheses were used to demonstrate the viability of this method.
RESUMEN
We herein report an efficient synthesis of 2-aroyl-3-arylquinolines from phenylalanines and anilines. The mechanism involves I2-mediated Strecker degradation enabled catabolism and reconstruction of amino acids and a cascade aniline-assisted annulation. Both DMSO and water act as oxygen sources in this convenient protocol.
RESUMEN
Synthesis of the C19-truncated maltepolide E has been accomplished via a diene-ene ring-closing metathesis (RCM) strategy without damage to the C11-C14 alkenyl epoxy unit. Upon release of the C17-OH group, it attacked at the C14 position with double bond migration and epoxide ring opening to furnish the C19-truncated maltepolides A and B as proposed for the biosynthesis of maltepolides.
RESUMEN
Concise synthesis of functionalized quinolines has received continuous research attention owing to the biological importance and synthetic potential of bicyclic N-heterocycles. However, synthetic routes to the 2,4-unsubstituted alkyl quinoline-3-carboxylate scaffold, which is an important motif in drug design, remain surprisingly limited, with modular protocols that proceed from readily available materials being even more so. We herein report an acidic I2-DMSO system that converts readily available aspartates and anilines into alkyl quinoline-3-carboxylate. This method can be extended to a straightforward synthesis of 3-arylquinolines by simply replacing the aspartates with phenylalanines. Mechanistic studies revealed that DMSO was activated by HI via a Pummerer reaction to provide the C1 synthon, while the amino acid catabolized to the C2 synthon through I2-mediated Strecker degradation. A formal [3 + 2 + 1] annulation of these two concurrently generated synthons with aniline was responsible for the selective formation of the quinoline core. The synthetic utility of this protocol was illustrated by the efficient synthesis of human 5-HT4 receptor ligand. Moreover, an unprecedented chemoselective synthesis of 2-deuterated, 3-substituted quinoline, featuring this reaction, has been established.