RESUMEN
Two-dimensional (2D) van der Waals heterostructures based on various 2D transition metal dichalcogenides are widely used in photodetection applications. However, their response time and photoresponsivity are limited, posing a challenge for their applications in high-sensitivity photodetection. Surface charge transfer doping (SCTD) has emerged as a novel doping approach for low-dimensional materials with high specific surface area and attracted considerable attention, as it is simple and effective, does not damage the lattice, and considers various types of dopants. Herein, we prepare p-i-n junction-based photodetectors via the SCTD of WSe2/ReS2 heterojunctions using p-type dopant F4-TCNQ molecules, where doped WSe2 serves as a p-type semiconductor, undoped WSe2 acts as an intrinsic layer, and ReS2 functions as an n-type semiconductor. The surface-charge-transfer-doped WSe2/ReS2 heterojunction leads to a reduction in the Schottky barrier and an increase in the built-in electric field compared with the as-fabricated heterojunction. In the photovoltaic mode and under 785 nm laser illumination, the photodiode exhibits an increase in responsivity from 0.08 to 0.29 A/W, specific detectivity from 1.89 × 1012 to 8.02 × 1012 Jones, and the external quantum efficiency from 12.67 to 46.29%. Additionally, the p-i-n structure expands the depletion region width, resulting in a photovoltaic response time of 7.56/6.48 µs and a -3 dB cutoff frequency of over 85 kHz, an order of magnitude faster than the pristine response time. Herein, we derive an effective and simple scheme for designing high-performance, low-power optoelectronic devices based on 2D van der Waals heterostructures.
RESUMEN
van der Waals heterostructures (vdWHs) overcoming the lattice and processing limitations of conventional heterostructures provide an opportunity to develop high-performance 2D vdWH solar cells and photodiodes. However, it is challenging to improve the sensitivity and response speed of 2D vdWH photovoltaic devices due to the low light absorption efficiency and electron/hole traps in heterointerfaces. Here, we design a PbS/MoS2/WSe2 heterostructure photodiode in which a light-sensitive PbS quantum dot (QD) layer combined with a MoS2/WSe2 heterostructure significantly enhances the photovoltaic response. The electron current in the heterostructure is increased by the effective collection of photogenerated electrons induced by PbS QDs. The device exhibits a broadband photovoltaic response from 405 to 1064 nm with a maximum responsivity of 0.76 A/W and a specific detectivity of 5.15 × 1011 Jones. In particular, the response speed is not limited by multiple electron traps in the PbS QDs/2D material heterointerface, and a fast rising/decaying time of 43/48 µs and a -3 dB cutoff frequency of over 10 kHz are achieved. The negative differential capacitance and frequency dependence of capacitance demonstrate the presence of interface states in the MoS2/WSe2 heterointerface that hamper the improvement of the response speed. The scheme to enhance photovoltaic performance without sacrificing response speed provides opportunities for the development of high-performance 2D vdWH optoelectronic devices.
RESUMEN
ZnO, a promising material for optoelectronic applications, has attracted considerable attention due to its wide and direct band gap and large exciton binding energy. To understand the applications of this material, fabrication of high quality p-type ZnO is a key step. However, a reliable p-type doping of this material remains a major challenge. In this study, we report p-type nitrogen-doped ZnO nanoparticle, grown in a nitrogen doped graphene layer matrix by a plasma heating process using a natural protein and zinc nitrate as the precursors. The structural characterizations are developed by several microscopic techniques including the field emission electron microscopy, high resolution transmission electron microscopy, x-ray photoelectron spectroscopy, and micro-Raman analysis. In addition, the ultraviolet (UV)-visible absorption characteristics and photoluminescence properties of the samples are studied. Its p-type conduction behaviour is confirmed by the Hall effect measurement, which was ascribed to the high nitrogen dopant concentration in the Zn-poor ZnO, and the related mechanism for the p-type behaviour is also discussed. Moreover, the results of the glucose detection based on the strong green luminescence of glucose indicate that the nitrogen-doped ZnO nanodots/nitrogen-doped graphene layer nanohybrid is also a competitive candidate in the biosensing field.
Asunto(s)
Grafito , Nanoestructuras , Óxido de Zinc , Glucosa , Grafito/química , Nanoestructuras/química , Nitrógeno/química , Óxido de Zinc/químicaRESUMEN
With their excellent optoelectronic properties, halide perovskite (HP) semiconductors have witnessed successful applications in many fields, such as solar cells, LEDs, photodetectors, transistors, and memristors. Exploiting their fascinating physical nature for the development of single nanodevices with multifunctionalities is significant yet remains challenging. We report a multifunctional device based on the n-perovskite/p-spiro-MeOTAD p-n heterojunction diode that enables the integration of photovoltaic, photodetection, and photosynaptic functions in a single device. The device exhibits a high photoelectronic conversion efficiency (PCE) of 17.64% under AM 1.5G illumination and excellent photodetection characteristics including a low drive voltage of 0.01 V, a short response time of 0.17 s, high switching repeatability, and stability. Coupled with the superior photomemristive effect of the device that can be used for the emulation of short- and long-term memory formation of visual synapses, these results suggest that the HP-based p-n heterojunction devices hold great potential in multifunctional integrated device applications.
RESUMEN
Two-dimensional van der Waals heterostructures can combine properties of individual materials to enable high-performance photodetection. Here, a novel ReS2/graphene/WSe2heterostructure, prepared by dry transfer, demonstrates air-stable, high-performance, polarization-sensitive, and broadband photodetection. Dark current can be strongly suppressed by the built-in electric field of the heterostructure. The specific detectivities are up to 1010Jones and 109Jones under zero and reverse bias, respectively. Response time is on the order of a millisecond. The polarization-sensitive photodetection has been observed in the heterostructure due to the low lattice symmetry of ReS2. Broadband photoresponse from visible to infrared range has been demonstrated. A high photoresponsivity of 1.02 A W-1is achieved for illumination at the wavelength of 785 nm. This work provides a viable approach toward future high-performance, air-stable, and polarization-sensitive broadband photodetectors.
RESUMEN
Excitons in two-dimensional (2D) materials are tightly bound and exhibit rich physics. So far, the optical excitations in 2D semiconductors are dominated by Wannier-Mott excitons, but molecular systems can host Frenkel excitons (FE) with unique properties. Here, we report a strong optical response in a class of monolayer molecular J-aggregates. The exciton exhibits giant oscillator strength and absorption (over 30% for monolayer) at resonance, as well as photoluminescence quantum yield in the range of 60-100%. We observe evidence of superradiance (including increased oscillator strength, bathochromic shift, reduced linewidth and lifetime) at room-temperature and more progressively towards low temperature. These unique properties only exist in monolayer owing to the large unscreened dipole interactions and suppression of charge-transfer processes. Finally, we demonstrate light-emitting devices with the monolayer J-aggregate. The intrinsic device speed could be beyond 30 GHz, which is promising for next-generation ultrafast on-chip optical communications.
RESUMEN
Atomically thin hexagonal boron nitride (h-BN) is often regarded as an elastic film that is impermeable to gases. The high stabilities in thermal and chemical properties allow h-BN to serve as a gas barrier under extreme conditions. Here, we demonstrate the isolation of hydrogen in bubbles of h-BN via plasma treatment. Detailed characterizations reveal that the substrates do not show chemical change after treatment. The bubbles are found to withstand thermal treatment in air, even at 800 °C. Scanning transmission electron microscopy investigation shows that the h-BN multilayer has a unique aligned porous stacking nature, which is essential for the character of being transparent to atomic hydrogen but impermeable to hydrogen molecules. In addition, we successfully demonstrated the extraction of hydrogen gases from gaseous compounds or mixtures containing hydrogen element. The successful production of hydrogen bubbles on h-BN flakes has potential for further application in nano/micro-electromechanical systems and hydrogen storage.
RESUMEN
Two-dimensional (2D) transition metal dichalcogenides (TMDCs) have been considered as promising candidates for next generation nanoelectronics. Because of their atomically-thin structure and high surface to volume ratio, the interfaces involved in TMDC-based devices play a predominant role in determining the device performance, such as charge injection/collection at the metal/TMDC interface, and charge carrier trapping at the dielectric/TMDC interface. On the other hand, the crystalline structures of TMDCs are enriched by a variety of intrinsic defects, including vacancies, adatoms, grain boundaries, and substitutional impurities. Customized design and engineering of the interfaces and defects provides an effective way to modulate the properties of TMDCs and finally enhance the device performance. Herein, we summarize and highlight recent advances and state-of-the-art investigations on the interface and defect engineering of TMDCs and their corresponding applications in electronic and optoelectronic devices. Various interface engineering approaches for TMDCs are overviewed, including surface charge transfer doping, TMDC/metal contact engineering, and TMDC/dielectric interface engineering. Subsequently, different types of structural defects in TMDCs are introduced. Defect engineering strategies utilized to modulate the optical and electronic properties of TMDCs, as well as the developed high-performance and functional devices are summarized. Finally, we highlight the challenges and opportunities for interface and defect engineering in TMDC materials for electronics and optoelectronics.
RESUMEN
The ultrafast growth of high-quality uniform monolayer WSe2 is reported with a growth rate of ≈26 µm s-1 by chemical vapor deposition on reusable Au substrate, which is ≈2-3 orders of magnitude faster than those of most 2D transition metal dichalcogenides grown on nonmetal substrates. Such ultrafast growth allows for the fabrication of millimeter-size single-crystal WSe2 domains in ≈30 s and large-area continuous films in ≈60 s. Importantly, the ultrafast grown WSe2 shows excellent crystal quality and extraordinary electrical performance comparable to those of the mechanically exfoliated samples, with a high mobility up to ≈143 cm2 V-1 s-1 and ON/OFF ratio up to 9 × 106 at room temperature. Density functional theory calculations reveal that the ultrafast growth of WSe2 is due to the small energy barriers and exothermic characteristic for the diffusion and attachment of W and Se on the edges of WSe2 on Au substrate.
RESUMEN
A low-temperature hydrothermal route has been developed, and pure phase Ba2Ni3F10 nanowires have been successfully prepared under optimized conditions. Under the 325 nm excitation, the Ba2Ni3F10 nanowires exhibit three emission bands with peak positions locating at 360, 530, and 700 nm, respectively. Combined with the first-principles calculations, the photoluminescence property can be explained by the electron transitions between the t2g and eg orbitals. Clear hysteresis loops observed below the temperature of 60 K demonstrates the weak ferromagnetism in Ba2Ni3F10 nanowires, which has been attributed to the surface strain of nanowires. Exchange bias with blocking temperature of 55 K has been observed, which originates from the magnetization pinning under the cooling field due to antiferromagnetic core/weak ferromagnetic shell structure of Ba2Ni3F10 nanowires.
RESUMEN
BaMnF4 microsheets have been prepared using a hydrothermal method. Strong room-temperature blue-violet photoluminescence has been observed (an absolute luminescence quantum yield of 67%) with two peaks located at 385 nm and 410 nm. More interestingly, photon self-absorption phenomenon has been observed, leading to an unusual abrupt decrease in the luminescence intensity at a wavelength of 400 nm. To understand the underlying mechanism of such emission, the electronic structure of BaMnF4 has been studied using first principles calculations. The observed two peaks are attributed to electron transitions between the upper-Hubbard bands of the Mn's t2g orbitals and the lower-Hubbard bands of the Mn's eg orbitals. The Mott gap mediated d-d orbital transitions may provide additional degrees of freedom to tune the photon generation and absorption in ferroelectrics.
RESUMEN
Low-dimensional materials such as graphene provide an ideal platform to probe the correlation between thermal transport and lattice defects, which could be engineered at the molecular level. In this work, we perform molecular dynamics simulations and non-contact optothermal Raman measurements to study this correlation. We find that oxygen plasma treatment could reduce the thermal conductivity of graphene significantly even at extremely low defect concentration (â¼ 83% reduction for â¼ 0.1% defects), which could be attributed mainly to the creation of carbonyl pair defects. Other types of defects such as hydroxyl, epoxy groups and nano-holes demonstrate much weaker effects on the reduction where the sp(2) nature of graphene is better preserved. With the capability of selectively functionalizing graphene, we propose an asymmetric junction between graphene and defective graphene with a high thermal rectification ratio of â¼ 46%, as demonstrated by our molecular dynamics simulation results. Our findings provide fundamental insights into the physics of thermal transport in defective graphene, and two-dimensional materials in general, which could help on the future design of functional applications such as optothermal and electrothermal devices.
RESUMEN
Bilayer graphene as a prototype of two-dimensional stacked material has recently attracted great attention. The twist angle between graphene layers adds another dimension to control its properties. In this study, we used Raman mapping to investigate the twist angle dependence of properties of twisted bilayer graphene (TBG) with irregular grains that was fabricated by chemical vapor deposition (CVD). Different Raman parameters including intensity, width, and position of G and 2D peaks were used to distinguish TBG with different twist angles. The statistical results from Raman imaging on the distribution of twist angle are consistent with the results from selected area election diffraction (SAED). Finally, the Raman peak at approximately 1347 cm(-1) for TBG with a large twist angle was assigned to the D-like peak, although it has similar excitation energy dependence of frequency as the defect-induced D peak. Theoretical calculation further confirmed that vacancy-like defect is not favored in the formation energy for TBG with a large twist angle as compared to monolayer graphene or TBG with other twist angles. These results will help to advance the understanding of TBG properties, especially for CVD samples with irregular grains.