RESUMEN
Anthracycline drugs mainly include doxorubicin, epirubicin, pirarubicin, and aclamycin, which are widely used to treat a variety of malignant tumors, such as breast cancer, gastrointestinal tumors, lymphoma, etc. With the accumulation of anthracycline drugs in the body, they can induce serious heart damage, limiting their clinical application. The mechanism by which anthracycline drugs cause cardiotoxicity is not yet clear. This review provides an overview of the different types of cardiac damage induced by anthracycline-class drugs and delves into the molecular mechanisms behind these injuries. Cardiac damage primarily involves alterations in myocardial cell function and pathological cell death, encompassing mitochondrial dysfunction, topoisomerase inhibition, disruptions in iron ion metabolism, myofibril degradation, and oxidative stress. Mechanisms of uptake and transport in anthracycline-induced cardiotoxicity are emphasized, as well as the role and breakthroughs of iPSC in cardiotoxicity studies. Selected novel cardioprotective therapies and mechanisms are updated. Mechanisms and protective strategies associated with anthracycline cardiotoxicity in animal experiments are examined, and the definition of drug damage in humans and animal models is discussed. Understanding these molecular mechanisms is of paramount importance in mitigating anthracycline-induced cardiac toxicity and guiding the development of safer approaches in cancer treatment.
RESUMEN
Cardiovascular diseases (CVDs) are a leading cause of death worldwide. For early diagnosis, intervention and management of CVDs, it is highly desirable to frequently monitor blood pressure (BP), a vital sign closely related to CVDs, during people's daily life, including sleep time. Towards this end, wearable and cuffless BP extraction methods have been extensively researched in recent years as part of the mobile healthcare initiative. This review focuses on the enabling technologies for wearable and cuffless BP monitoring platforms, covering both the emerging flexible sensor designs and BP extraction algorithms. Based on the signal type, the sensing devices are classified into electrical, optical, and mechanical sensors, and the state-of-the-art material choices, fabrication methods, and performances of each type of sensor are briefly reviewed. In the model part of the review, contemporary algorithmic BP estimation methods for beat-to-beat BP measurements and continuous BP waveform extraction are introduced. Mainstream approaches, such as pulse transit time-based analytical models and machine learning methods, are compared in terms of their input modalities, features, implementation algorithms, and performances. The review sheds light on the interdisciplinary research opportunities to combine the latest innovations in the sensor and signal processing research fields to achieve a new generation of cuffless BP measurement devices with improved wearability, reliability, and accuracy.
RESUMEN
Herein, we report a systematic solvent selection for eco-friendly processed binary all-polymer solar cells (APSCs) with decent power conversion efficiencies (PCEs). Three typical solvents, toluene, o-xylene, and 1,2,4-trimethylbezene, are chosen and compared. The device enabled by o-xylene exhibits the most outstanding PCE of 16.22%, thanks to its favorable morphology, which is to say a well-formed face-on orientation packing motif and a suitable crystallinity and size of phase segregation. Consequently, the solar cell affords sufficient charge generation, as well as efficient and balanced charge transport, which are all positive to pursuing high efficiency. This work offers an understanding of using complete solvent selection as the strategy to realize high-performance devices by sophisticatedly controlling the morphology.
RESUMEN
Many studies have explored differentially expressed genes (DEGs) between some pathogens and hosts, but no study has focused on the interaction of DEGs between Edwardsiella anguillarum (Ea) and Anguilla anguilla (Aa). In this study, we examined the interactions of DEGs during Ea infection and Aa anti-infection processes by dual RNA sequencing. Total RNA from in vitro and in vivo (Aa liver) Ea culture was extracted. Using high-throughput transcriptomics, significant DEGs that were expressed between Ea cultured in vitro versus in vivo and those in the liver of the infected group versus control group were identified. Protein-protein interactions between the pathogen and host were explored using Cytoscape according to the HPIDB 3.0 interaction transcription database. The results showed that the liver in the infection group presented with severe bleeding and a large number of thrombi in the hepatic vessels. We found 490 upregulated and 398 downregulated DEGs of Ea in vivo versus Ea cultured in vitro, and 2177 upregulated and 970 downregulated genes in the liver of the infected eels. Gene ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) analysis of the pathogen DEGs revealed that the upregulated genes were mainly enriched in migration, colonization, biofilm formation, and significantly enriched in ABC transport and quorum sensing; the downregulated genes were mainly involved in metabolism, information transduction, organelle formation, enzyme catalysis, molecular transport, and binding. GO of the host DEGs showed that metabolic process, catalytic activity, single organism metabolic process, small molecule binding, nucleotide binding, nucleotide phosphate binding, and anion binding were markedly enriched. Finally, we found that 79 Ea and 148 Aa proteins encoded by these DEGs were involved in an interaction network, and some pathogen (DegP, gcvP, infC, carB, rpoC, trpD, sthA, and FhuB) and host proteins (MANBA, STAT1, ETS2, ZEP1, TKT1, NMI and RBPMS) appear to play crucial roles in infection. Thus, determining the interaction networks revealed crucial molecular mechanisms underlying the process of pathogenic infection and host anti-infection.
Asunto(s)
Anguilla , Infecciones por Enterobacteriaceae/veterinaria , Enfermedades de los Peces/genética , Interacciones Huésped-Patógeno , Transcriptoma , Anguilla/genética , Animales , Edwardsiella , Infecciones por Enterobacteriaceae/genética , Enfermedades de los Peces/microbiología , Perfilación de la Expresión Génica , Análisis de Secuencia de ARNRESUMEN
The bulk morphology of the active layer of organic solar cells (OSCs) is known to be crucial to the device performance. The thin film device structure breaks the symmetry into the in-plane direction and out-of-plane direction with respect to the substrate, leading to an intrinsic anisotropy in the bulk morphology. However, the characterization of out-of-plane nanomorphology within the active layer remains a grand challenge. Here, we utilized an X-ray scattering technique, Grazing-incident Transmission Small-angle X-ray Scattering (GTSAXS), to uncover this new morphology dimension. This technique was implemented on the model systems based on fullerene derivative (P3HT:PC71BM) and non-fullerene systems (PBDBT:ITIC, PM6:Y6), which demonstrated the successful extraction of the quantitative out-of-plane acceptor domain size of OSC systems. The detected in-plane and out-of-plane domain sizes show strong correlations with the device performance, particularly in terms of exciton dissociation and charge transfer. With the help of GTSAXS, one could obtain a more fundamental perception about the three-dimensional nanomorphology and new angles for morphology control strategies towards highly efficient photovoltaic devices.
RESUMEN
Macromolecular films are crucial functional materials widely used in the fields of mechanics, electronics, optoelectronics, and biology, due to their superior properties of chemical stability, small density, high flexibility, and solution-processing ability. Their electronic and mechanical properties, however, are typically much lower than those of crystalline materials, as the macromolecular films have no long-range structural ordering. The state-of-the-art for producing highly ordered macromolecular films is still facing a great challenge due to the complex interactions between adjacent macromolecules. Here, the growth of textured macromolecular films on a designed graphene/high-index copper (Cu) surface is demonstrated. This successful growth is driven by a patterned potential that originates from the different amounts of charge transfer between the graphene and Cu surfaces with, alternately, terraces and step edges. The textured films exhibit a remarkable improvement in remnant ferroelectric polarization and fracture strength. It is also demonstrated that this growth mechanism is universal for different macromolecules. As meter-scale graphene/high-index Cu substrates have recently become available, the results open a new regime for the production and applications of highly ordered macromolecular films with obvious merits of high production and low cost.
RESUMEN
Despite the remarkable progress achieved in recent years, organic photovoltaics (OPVs) still need work to approach the delicate balance between efficiency, stability, and cost. Herein, two fully non-fused electron acceptors, PTB4F and PTB4Cl, are developed via a two-step synthesis from single aromatic units. The introduction of a two-dimensional chain and halogenated terminals for these non-fused acceptors plays a synergistic role in optimizing their solid stacking and orientation, thus promoting an elongated exciton lifetime and fast charge-transfer rate in bulk heterojunction blends. As a result, PTB4Cl, upon blending with PBDB-TF polymer, has enabled single-junction OPVs with power conversion efficiencies of 12.76 %, representing the highest values among the reported fully unfused electron acceptors so far.
RESUMEN
Edwardsiella anguillarum is one of the common bacterial pathogens for the cultivated eels in China. The aim of this study was to reveal the cause of E. anguillarum pathogenic to European eel (Anguilla anguilla) from the perspective of the transcriptome. In this study, we first prepared E. anguillarum cultured in vitro and analysed the whole transcriptome after extracting the total RNA. Then, eels were i.p injected with E. anguillarum, and total RNA were extracted from the liver of European eels 48 h after the infection. After sequencing the transcriptome, we obtained average 1.97 × 108 clean reads cultured in vitro and 1.36 × 105 clean reads located in vivo after annotating all reads into the genome of E. anguillarum. The whole transcriptome showed, compared to the E. anguillarum cultured in vitro, 503 significantly up and 657 significantly down-regulated different expressed genes (DEGs) were observed. KEGG analysis showed that 38 DEGs of Two-Component System, 41 DEGs of ABC transporter, and 10 DEGs flagellar assembly pathways were highly upregulated in E. anguillarum located in vivo. Then, we designed primers to analyse the up-regulated DEGs through qRT-PCR and confirmed some up-regulated DEGs. The results of this study provide important reference for the further study of pathogen-host interaction between E. anguillarum and European eel.
Asunto(s)
Anguilla , Enfermedades de los Peces , Transportadoras de Casetes de Unión a ATP , Anguilla/genética , Animales , China , Edwardsiella , TranscriptomaRESUMEN
Flammulina velutipes is one of the most popular edible mushrooms worldwide. A selenium-biofortification method for its fruiting body was developed using selenite. This study investigated the selenium content, distribution, speciation and the effect of selenium on mushroom growth, nutritive value, and mineral accumulation. Results showed that F. velutipes accumulated nearly 108 µg/g of organic selenium under treatment with 20 µg/g selenite, which accounts for over 97% of total selenium. Most (60-74%) of selenium combined with the protein fraction, whereas 15-21% combined with the polysaccharide fraction. Selenomethionine (56.8%), selenocysteine (22.8%), and methylselenocysteine (17.3%) were the main organic selenium compounds in the fruiting body. Selenium biofortification increased the biomass yield of fruiting body and elevated the content of polysaccharides, proteins, total amino acids, essential amino acids, and several minerals, including iron, calcium, and copper. F. velutipes might become a suitable selenium supplement.
Asunto(s)
Flammulina/metabolismo , Valor Nutritivo , Selenio/metabolismo , Antioxidantes/metabolismo , Biofortificación/métodos , Flammulina/crecimiento & desarrolloRESUMEN
Recent advances in the development of polymerized A-D-A-type small-molecule acceptors (SMAs) have promoted the power conversion efficiency (PCE) of all-polymer solar cells (all-PSCs) over 13%. However, the monomer of an SMA typically consists of a mixture of three isomers due to the regio-isomeric brominated end groups (IC-Br(in) and IC-Br(out)). In this work, the two isomeric end groups are successfully separated, the regioisomeric issue is solved, and three polymer acceptors, named PY-IT, PY-OT, and PY-IOT, are developed, where PY-IOT is a random terpolymer with the same ratio of the two acceptors. Interestingly, from PY-OT, PY-IOT to PY-IT, the absorption edge gradually redshifts and electron mobility progressively increases. Theory calculation indicates that the LUMOs are distributed on the entire molecular backbone of PY-IT, contributing to the enhanced electron transport. Consequently, the PM6:PY-IT system achieves an excellent PCE of 15.05%, significantly higher than those for PY-OT (10.04%) and PY-IOT (12.12%). Morphological and device characterization reveals that the highest PCE for the PY-IT-based device is the fruit of enhanced absorption, more balanced charge transport, and favorable morphology. This work demonstrates that the site of polymerization on SMAs strongly affects device performance, offering insights into the development of efficient polymer acceptors for all-PSCs.
RESUMEN
Although promising progress has been made in near-infrared (NIR) electron acceptors for broadening photoresponse of optoelectronics, there are still strong needs for efficient NIR materials with low synthetic complexities. In this work, three simple NIR acceptors are developed with absorption up to 1000 nm and possessing the same dithiophene cores with varied heteroatom linkages to carbon (C) atom for W1, to silicon (Si) for W2, and to nitrogen (N) for W3. It is found that the tuning of only one atom for simple acceptors can surprisingly lead to a large difference in photoelectric properties and solid stacking, as well as the performance in optoelectronics. Although quite simple, these electron acceptors, especially W1 (C), can also perform quite efficiently as organic photovoltaics (OPVs) as well as sensitive organic photodetectors (OPDs) when blended with PTB7-Th polymer. It is worthy to note that, among the representative NIR acceptors with over 950 nm absorption, W1 possesses one of the best figure-of-merit when considering the photoelectric performance versus synthetic complexity of materials. As a result, the PTB7-Th:W1-based OPDs reach a fast temporal response, ultralow-light intensity detection of 1.70 × 10-11 W·cm-2, and a high specific detectivity of 4.28 × 1012 cm·Hz1/2·W-1 at 830 nm, representing a highly sensitive self-powered OPD approach the commercial broadband silicon detectors. These simple structure materials provide a potential example for further application of NIR electron acceptor.
RESUMEN
Understanding the conformation effect on molecular packing, miscibility, and photovoltaic performance is important to open a new avenue for small-molecule acceptor (SMA) design. Herein, two novel acceptor-(donor-acceptor1-donor)-acceptor (A-DA1D-A)-type asymmetric SMAs are developed, namely C-shaped BDTP-4F and S-shaped BTDTP-4F. The BDTP-4F-based polymer solar cells (PSCs) with PM6 as donor, yields a power conversion efficiency (PCE) of 15.24%, significantly higher than that of the BTDTP-4F-based device (13.12%). The better PCE for BDTP-4F-based device is mainly attributed to more balanced charge transport, weaker bimolecular recombination, and more favorable morphology. Additionally, two traditional A-D-A-type SMAs (IDTP-4F and IDTTP-4F) are also synthesized to investigate the conformation effect on morphology and device performance. Different from the device result above, here, IDTP-4F with S-shape conformation outperforms than IDTTP-4F with C-shape conformation. Importantly, it is found that for these two different types of SMA, the better performing binary blend has similar morphological characteristics. Specifically, both PM6:BDTP-4F and PM6:IDTP-4F blend exhibit perfect nanofibril network structure with proper domain size, obvious face-on orientation and enhance donor-acceptor interactions, thereby better device performance. This work indicates tuning molecular conformation plays pivotal role in morphology and device effciciency, shining a light on the molecular design of the SMAs.
RESUMEN
To take advantages of the intense absorption and fluorescence, high charge mobility, and high dielectric constant of CsPbI3 perovskite quantum dots (PQDs), PQD hybrid nonfullerene organic solar cells (OSCs) are fabricated. Addition of PQDs leads to simultaneous enhancement of open-circuit voltage (VOC ), short-circuit current density (JSC ), and fill factor (FF); power conversion efficiencies are boosted from 11.6% to 13.2% for PTB7-Th:FOIC blend and from 15.4% to 16.6% for PM6:Y6 blend. Incorporation of PQDs dramatically increases the energy of the charge transfer state, resulting in near-zero driving force and improved VOC . Interestingly, at near-zero driving force, the PQD hybrid OSCs show more efficient charge generation than the control device without PQDs, contributing to enhanced JSC , due to the formation of cascade band structure and increased molecular ordering. The strong fluorescence of the PQDs enhances the external quantum efficiency of the electroluminescence of the active layer, which can reduce nonradiative recombination voltage loss. The high dielectric constant of the PQDs screens the Coulombic interactions and reduces charge recombination, which is beneficial for increased FF. This work may open up wide applicability of perovskite quantum dots and an avenue toward high-performance nonfullerene solar cells.
RESUMEN
Energy loss (E loss) consisting of radiative recombination loss (ΔE 1 and ΔE 2) and nonradiative recombination loss (ΔE 3) is considered as an important factor for organic solar cells (OSCs). Herein, two N-functionalized asymmetrical small molecule acceptors (SMAs), namely N7IT and N8IT are designed and synthesized, to explore the effect of N on reducing E loss with sulfur (S) as a comparison. N7IT-based OSCs achieve not only a higher PCE (13.8%), but also a much lower E loss (0.57 eV) than those of the analogue (a-IT)-based OSCs (PCE of 11.5% and E loss of 0.72 eV), which are mainly attributed to N7IT's significantly enhanced charge carrier density (promoting J SC) and largely suppressed nonradiative E loss by over 0.1 eV (enhancing V OC). In comparison, N8IT, with an extended π-conjugated length, shows relatively lower photovoltaic performance than N7IT (but higher than a-IT) due to the less favorable morphology caused by the excessively large dipole moment of the asymmetrical molecule. Finally, this work sheds light on the structure-property relationship of the N-functionalization, particularly on its effects on reducing the E loss, which could inspire the community to design and synthesize more N-functionalized SMAs.
RESUMEN
In cultivated European eels, Aeromonas hydrophila, Edwardsiella anguillarum and Vibrio vulnificus are three important bacterial pathogens. In this study, an expressed recombinant Outer membrane proteinâ ¡ (rOmpâ ¡) from A. hydrophila was intraperitoneally injected into European eels (Angullia angullia). All examined eels were equally divided into three groups. One group was injected with PBS only (PBS group), one group was injected with 1:1 mixture of PBS and Freund's incomplete adjuvant (PBS + F, adjuvant group), and the third group was injected with 1:1 mixture of 1 mg mL-1 rOmpâ ¡ and Freund's incomplete adjuvant (rOmpâ ¡+F, Ompâ ¡ group). The immunogenicity of Ompâ ¡ was studied by detecting the expression of 4 immune-related genes, stimulation index (SI) of the whole blood cell, serum antibody titer, lysozyme and Superoxide Dismutase (SOD) activity, and relative percent of survival (RPS) rate. The results showed that gene expression of MHC-â ¡, LysC, SOD and IgM in the Ompâ ¡ group significantly increased in liver, spleen, kidney and intestine. At 28 days post the immunization (dpi), the SI of whole blood cells in the Ompâ ¡ group increased significantly; at 14, 21, 28 and 42 dpi, the serum antibody titers against A. hydrophila and E. anguillarum in the Ompâ ¡ group were significantly higher than that of the PBS and the adjuvant group; the SOD in the Ompâ ¡ group was found increased significantly in liver, kidney, mucus and serum. On the 28 dpi, eels were challenged by A. hydrophila, E. anguillarum and V. vulnificus for cross protection study. The results showed that the RPS of the Ompâ ¡ group were 83.33%, 55.56% and 33.33% respectively. These results showed that the expressed Ompâ ¡ from A. hydrophila significantly improve the immune function of Europena eels and their resistance to the infection of A. hydrophila and E. anguillarum simultaneously.
Asunto(s)
Anguilla , Proteínas de la Membrana Bacteriana Externa/inmunología , Resistencia a la Enfermedad , Enfermedades de los Peces/prevención & control , Inmunidad Celular/efectos de los fármacos , Inmunidad Humoral/efectos de los fármacos , Inmunización/veterinaria , Aeromonas hydrophila/inmunología , Animales , Proteínas de la Membrana Bacteriana Externa/administración & dosificación , Edwardsiella/inmunología , Infecciones por Enterobacteriaceae/inmunología , Infecciones por Enterobacteriaceae/microbiología , Infecciones por Enterobacteriaceae/prevención & control , Infecciones por Enterobacteriaceae/veterinaria , Enfermedades de los Peces/inmunología , Enfermedades de los Peces/microbiología , Infecciones por Bacterias Gramnegativas/inmunología , Infecciones por Bacterias Gramnegativas/microbiología , Infecciones por Bacterias Gramnegativas/prevención & control , Infecciones por Bacterias Gramnegativas/veterinariaRESUMEN
In cultivated European eels, Aeromonas hydrophila, Edwardsiella anguillarum and Vibrio vulnificus are three important bacterial pathogens. In this study, European eels (Anguilla anguilla) were immunized by the bivalent expression products of the outer membrane protein (Omp) gene from A. hydrophila (Ompâ ¡) and E. anguillarum (OmpA), and the effects of the bivalent protein (rOmpâ ¡-A) on the immune function of the European eel were detected. Three hundred eels were divided average into three groups of PBS, adjuvant and rOmp. Eels of three goups were injected intraperitoneal with 0.2 mL of PBS (0.01 mol/L, pH7.4), PBS + F (PBS mixed equal volume of freund's uncomplete adjuvant) or rOmpâ ¡-A (1 mg mL-1 rOmpâ ¡-A mixed equal volume of freund's uncomplete adjuvant). Four immune-related genes expression, proliferation of whole blood cells, serum and skin mucus antibody titer, superoxide dismutase (SOD) activity and the relative percent of survival (RPS) were studied at different days (or hours) post the immunization. The results showed that the igm, lysC, mhc2 and sod gene in the liver, spleen, kidney and intestine tract were significant increased in the Omp group; On the 28 day post the immunization (dpi), blood cell proliferation was increased in the Omp group, and on the 14, 21, 28 and 42 dpi, antibody titers in serum and mucus of the Omp group were significantly higher than that of the PBS and adjuvant group, regardless of coating with bacteria or Omp antigen. The SOD activity of Omp group increased significantly in liver, kidney, skin mucus and serum from 14 to 42 dpi, especially in serum. Eels chanllenged by A. hydrophila, E. anguillarum and V. vulnificus in the bivalent Omp group showed the RPS were 83.33%, 55.56% and 44.44%, respectively. The results of this study showed that immunization of the bivalent Omp could effectively improve the immune function of European eels, and produced effectively protection to A. hydrophila and E. anguillarum infection. Simultaneously, the bivalent Omp also produced distinct cross-protection to the eels challenged by V. vulnificus.
Asunto(s)
Anguilla/inmunología , Proteínas de la Membrana Bacteriana Externa/inmunología , Infecciones por Enterobacteriaceae/veterinaria , Enfermedades de los Peces/prevención & control , Vibriosis/veterinaria , Aeromonas hydrophila , Anguilla/microbiología , Animales , Antígenos Bacterianos/inmunología , Proteínas de la Membrana Bacteriana Externa/administración & dosificación , Protección Cruzada/inmunología , Edwardsiella , Infecciones por Enterobacteriaceae/prevención & control , Enfermedades de los Peces/microbiología , Inmunización/veterinaria , Inyecciones Intraperitoneales , Alimentos Marinos , Vibriosis/prevención & control , Vibrio vulnificusRESUMEN
In the field of all-polymer solar cells (all-PSCs), all efficient polymer acceptors that exhibit efficiencies beyond 8% are based on either imide or dicyanoethylene. To boost the development of this promising solar cell type, creating novel electron-deficient units to build high-performance polymer acceptors is critical. A novel electron-deficient unit containing BâN bonds, namely, BNIDT, is synthesized. Systematic investigation of BNIDT reveals desirable properties including good coplanarity, favorable single-crystal structure, narrowed bandgap and downshifted energy levels, and extended absorption profiles. By copolymerizing BNIDT with thiophene and 3,4-difluorothiophene, two novel conjugated polymers named BN-T and BN-2fT are developed, respectively. It is shown that these polymers possess wide absorption spectra covering 350-800 nm, low-lying energy levels, and ambipolar film-transistor characteristics. Using PBDB-T as the donor and BN-2fT as the acceptor, all-PSCs afford an encouraging efficiency of 8.78%, which is the highest for all-PSCs excluding the devices based on imide and dicyanoethylene-type acceptors. Considering that the structure of BNIDT is totally different from these classical units, this work opens up a new class of electron-deficient unit for constructing efficient polymer acceptors that can realize efficiencies beyond 8% for the first time.
RESUMEN
A small-molecule nonfullerene acceptor, ITIC-S, bearing a fused heptacyclic benzodi(cyclopentadithiophene) core with a thioether-bond-substituted thiophene, is designed, synthesized, and compared with its alkyl-substituted analog, ITIC2. Compared with ITIC2, ITIC-S with a thioether bond exhibits higher electron mobility, a slightly larger optical band gap, and similar absorption. The active layer incorporating ITIC-S and the wide-bandgap polymeric donor PBDB-T-SF displays a smaller crystalline coherent length of π-π stacking, more balanced mobilities, weaker bimolecular recombination, and more effective charge collection than its PBDB-T-SF:ITIC2 counterpart. Accordingly, polymer solar cells incorporating ITIC-S and PBDB-T-SF demonstrate a fill factor (FF) of 66.8% and a champion power conversion efficiency (PCE) of 11.6%, exceeding those of the PBDB-T-SF:ITIC2 blend (PCE = 10.1%, FF = 59.7%), which shows that the thioether bond substitution strategy is an easy yet viable way for designing high-performance electron acceptors.
RESUMEN
A new fused-chrysene electron-donating core is synthesized, where chrysene is condensed with two thiophenes via two dihydrobenzene rings. Based on this building block coupled with two electron-accepting end groups of 1,1-dicyanomethylene-3-indanone, a new Z-shaped fused-ring electron acceptor, FCIC, is designed and synthesized. FCIC shows intense absorption in the 500-850 nm region, with a maximum molar absorptivity of 1.5 × 105 M-1 cm-1, a bandgap of 1.50 eV, and a charge mobility of 2.5 × 10-4 cm2 V-1 s-1. The ternary organic photovoltaic cells based on PTB7-Th/F8IC/FCIC yield an efficiency of 12.6%, higher than that of the binary cells of PTB7-Th/F8IC (10.7%) and PTB7-Th/FCIC (7.21%). Relative to the PTB7-Th/F8IC binary blend, the addition of FCIC leads to improvement in the open-circuit voltage, short-circuit current, and fill factor.
RESUMEN
Poly(3-hexylthiophene) (P3HT)-based organic solar cells (OSCs) have been extensively studied due to unique advantages of P3HT such as roll-to-roll and large-area printing fabrication, but a poor short-circuit current density greatly limits the enhancement of power conversion efficiency (PCE). Herein, via the thiophene-fused aromatic heterocycle as a "π-bridge", two "A-π-D-π-A"-type acceptors have been designed and synthesized for P3HT-based OSCs. The aromaticity of the fused thiophene ring has effectively stabilized the quinoid population, thus strengthening the intramolecular charge transfer and further improving the current density. Owing to the weaker electron-withdrawing ability of the thiophene-fused benzotriazole unit in JC2 than the thiophene-fused benzothiadiazole unit in JC1, a blue-shifted absorption occurs for JC2 to show a better complementarity with P3HT to improve the light-harvesting efficiency and current density of the derived OSCs, and an uplifted lowest unoccupied molecular orbital energy level is also achieved for JC2 to obtain higher voltages. Thus, the P3HT:JC2-based device exhibits a PCE of 6.24% with a high JSC of 13.96 mA cm-2 and a VOC of 0.71 V, significantly exceeding those of the P3HT:JC1 device with a PCE of 2.80%, a JSC of 10.66 mA cm-2, and a VOC of 0.48 V. This indicates that the fusion of a thiophene ring onto a benzotriazole unit is an effective strategy to balance the VOC and JSC of P3HT-based OSCs to achieve excellent photovoltaic performances.