Unveiling the neuroprotection effects of Volvalerenic acid A: Mitochondrial fusion induction via IDO1-mediated Stat3-Opa1 signaling pathway.

BACKGROUND: Ischemic stroke is a leading cause of death and long-term disability worldwide. Studies have suggested that cerebral ischemia induces massive mitochondrial damage. Valerianic acid A (VaA) is the main active ingredient of valerianic acid with neuroprotective activity. PURPOSE: This study aimed to investigate the neuroprotective effects of VaA with ischemic stroke and explore the underlying mechanisms. METHOD: In this study, we established the oxygen-glucose deprivation and reperfusion (OGD/R) cell model and the middle cerebral artery occlusion and reperfusion (MCAO/R) animal model in vitro and in vivo. Neurological behavior score, 2, 3, 5-triphenyl tetrazolium chloride (TTC) staining and Hematoxylin and Eosin (HE) Staining were used to detect the neuroprotection of VaA in MCAO/R rats. Also, the levels of ROS, mitochondrial membrane potential (MMP), and activities of NAD+ were detected to reflect mitochondrial function. Mechanistically, gene knockout experiments, transfection experiments, immunofluorescence, DARTS, and molecular dynamics simulation experiments showed that VaA bound to IDO1 regulated the kynurenine pathway of tryptophan metabolism and prevented Stat3 dephosphorylation, promoting Stat3 activation and subsequent transcription of the mitochondrial fusion-related gene Opa1. RESULTS: We showed that VaA decreased the infarct volume in a dose-dependent manner and exerted neuroprotective effects against reperfusion injury. Furthermore, VaA promoted Opa1-related mitochondrial fusion and reversed neuronal mitochondrial damage and loss after reperfusion injury. In SH-SY5Y cells, VaA (5, 10, 20 µM) exerted similar protective effects against OGD/R-induced injury. We then examined the expression of significant enzymes regulating the kynurenine (Kyn) pathway of the ipsilateral brain tissue of the ischemic stroke rat model, and these enzymes may play essential roles in ischemic stroke. Furthermore, we found that VaA can bind to the initial rate-limiting enzyme IDO1 in the Kyn pathway and prevent Stat3 phosphorylation, promoting Stat3 activation and subsequent transcription of the mitochondrial fusion-related gene Opa1. Using in vivo IDO1 knockdown and in vitro IDO1 overexpressing models, we demonstrated that the promoted mitochondrial fusion and neuroprotective effects of VaA were IDO1-dependent. CONCLUSION: VaA administration improved neurological function by promoting mitochondrial fusion through the IDO1-mediated Stat3-Opa1 pathway, indicating its potential as a therapeutic drug for ischemic stroke.

A pH/ROS-responsive antioxidative and antimicrobial GelMA hydrogel for on-demand drug delivery and enhanced osteogenic differentiation in vitro.

Long-term inflammation, including those induced by bacterial infections, contributes to the superfluous accumulation of reactive oxygen species (ROS), further aggravating this condition, decreasing the local pH, and adversely affecting bone defect healing. Conventional drug delivery scaffold materials struggle to meet the demands of this complex and dynamic microenvironment. In this work, a smart gelatin methacryloyl (GelMA) hydrogel was synthesized for the dual delivery of proanthocyanidin and amikacin based on the unique pH and ROS responsiveness of boronate complexes. Fourier-transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) demonstrated the co-crosslinking of two boronate complexes with GelMA. The addition of the boronate complexes improved the mechanical properties, swelling ratio, degradation kinetics and antioxidative properties of the hydrogel. The hydrogel exhibited pH and ROS responses and a synergistic control over the drug release. Proanthocyanidin was responsively released to protect mouse osteoblast precursor cells from oxidative stress and promote their osteogenic differentiation. The hydrogel responded to pH changes and released sufficient amikacin in a timely manner, thereby exerting an efficient antimicrobial effect. Overall, the hydrogel delivery system exhibited a promising strategy for solving infectious and inflammatory problems in bone defects and promoting early-stage bone healing.

'Gold' lost in restoration: Evaluation of core morphology of custom metal posts and cores, and analysis of precious metal debris.

1 Objectives: To investigate the deviations between the morphological dimensions of finished cores and desired dimensions made by three available fabricating techniques. To assess the precious metal loss in custom precious metal post and core restorative treatment in the dental clinic. 2 Methods: Titanium posts and cores were fabricated using three different techniques: digital scanning impression technology, digital scanning wax-pattern technology, and the traditional lost-wax casting method. Geomagic Studio was used to fit the scanned model data to the digital design data of the expected preparation and to analyze the 3D deviations between the two. Precious metal debris from the precious metal post and core was collected, processed, weighed and analyzed for precious metal elements by energy-dispersive X-ray spectroscopy layered images. 3 Results: In all 48 pairs of models, there were positive and negative deviations, with the largest mean positive deviation of (0.752 ± 0.037 mm) for models made by the semi-digital scanning wax-pattern technique. A total of 7001.3 mg of metals was recovered from the waste streams collected, which contained precious metals-mainly gold, silver, and platinum. 4 Conclusions: There were discrepancies between the custom core and the expected preparation regardless of the fabrication process used. The digital scanning impression technology showed better dimensional rationality of crown cores. Custom precious metal posts and cores can have an average precious metal loss of 129.7 mg per case in the dental clinic.

Lipidomics profiles of human spermatozoa: insights into capacitation and acrosome reaction using UPLC-MS-based approach.

Introduction: Lipidomics elucidates the roles of lipids in both physiological and pathological processes, intersecting with many diseases and cellular functions. The maintenance of lipid homeostasis, essential for cell health, significantly influences the survival, maturation, and functionality of sperm during fertilization. While capacitation and the acrosome reaction, key processes before fertilization, involve substantial lipidomic alterations, a comprehensive understanding of the changes in human spermatozoa's lipidomic profiles during these processes remains unknown. This study aims to explicate global lipidomic changes during capacitation and the acrosome reaction in human sperm, employing an untargeted lipidomic strategy using ultra-performance liquid chromatography-mass spectrometry (UPLC-MS). Methods: Twelve semen specimens, exceeding the WHO reference values for semen parameters, were collected. After discontinuous density gradient separation, sperm concentration was adjusted to 2 x 106 cells/ml and divided into three groups: uncapacitated, capacitated, and acrosome-reacted. UPLC-MS analysis was performed after lipid extraction from these groups. Spectral peak alignment and statistical analysis, using unsupervised principal component analysis (PCA), bidirectional orthogonal partial least squares discriminant analysis (O2PLS-DA) analysis, and supervised partial least-squares-latent structure discriminate analysis (PLS-DA), were employed to identify the most discriminative lipids. Results: The 1176 lipid peaks overlapped across the twelve individuals in the uncapacitated, capacitated, and acrosome-reacted groups: 1180 peaks between the uncapacitated and capacitated groups, 1184 peaks between the uncapacitated and acrosome-reacted groups, and 1178 peaks between the capacitated and acrosome-reacted groups. The count of overlapping peaks varied among individuals, ranging from 739 to 963 across sperm samples. Moreover, 137 lipids had VIP values > 1.0 and twenty-two lipids had VIP > 1.5, based on the O2PLS-DA model. Furthermore, the identified twelve lipids encompassed increases in PI 44:10, LPS 20:4, LPA 20:5, and LPE 20:4, and decreases in 16-phenyl-tetranor-PGE2, PC 40:6, PS 35:4, PA 29:1, 20-carboxy-LTB4, and 2-oxo-4-methylthio-butanoic acid. Discussion: This study has been the first time to investigate the lipidomics profiles associated with acrosome reaction and capacitation in human sperm, utilizing UPLC-MS in conjunction with multivariate data analysis. These findings corroborate earlier discoveries on lipids during the acrosome reaction and unveil new metabolites. Furthermore, this research highlights the effective utility of UPLC-MS-based lipidomics for exploring diverse physiological states in sperm. This study offers novel insights into lipidomic changes associated with capacitation and the acrosome reaction in human sperm, which are closely related to male reproduction.

A chlorogenic acid-chitosan complex bifunctional coating for improving osteogenesis differentiation and bactericidal properties of zirconia implants.

Poor osteogenesis caused by limited bioactivity and peri-implantitis caused by bacterial colonization are the main challenges affecting the use of zirconia-based materials in dental implants. Accordingly, the development of a surface treatment method with an antibacterial effect and that promotes osteogenesis without damage to cells is crucial for yttrium-stabilized tetragonal zirconia (Y-TZP) implants. Herein, we have developed a functional surface modification strategy whereby a poly (ethylene imine)/hyaluronic acid /chitosan-chlorogenic acid (PEI/HA/CGA-CS) conjugate is deposited on a zirconia surface by the layer-by-layer (LBL) technique, enhancing its osteogenic differentiation and antibacterial activities. The results showed that the PEI/HA/CGA-CS coating improved the wettability of the zirconia surface and maintained stable release of CGA. The PEI/HA/CGA-CS functional coating was found to promote early cell adhesion, proliferation, differentiation, and calcification. The results of bacterial adhesion and activity tests showed that the coating effectively inhibits the proliferation and activity of Porphyromonas gingivalis (P. gingivalis) and Aggregatibacter actinomycetemcomitans (A. actinomycetemcomitans) without impairing the biological activity of osteoblasts. In addition, we found that the PEI/HA/CGA-CS coating enhances the osteogenesis of MC3T3-E1 cells by promoting the protein expression of Nephronectin (NPNT) and activating the Wnt/ß-catenin signaling pathway. The above results are of profound significance for the practical application of zirconia-based implants. DATA AVAILABILITY: Data will be made available on request.

Evaluation of custom posts and cores fabricated by two digital technologies in core and post space dimensions.

PURPOSE: To evaluate the adaptability between posts and post spaces and the rationality of cores fabricated by two digital custom post-and-core processes. MATERIALS AND METHODS: Titanium post-and-cores were fabricated by digital scanning impression technology or digital scanning wax-pattern technology on tooth defect molds of incisors, premolars, and molars, with traditional lost-wax casts of these teeth as the controls. Micro-CT and a laboratory scanner were used to determine intervals between post wall and root canal wall of the root apex, middle, and cervix of each sample in cross-, sagittal, and coronal sections; intervals between the end of post and tooth; diameters of cervical, middle, and incisal part at cross-, sagittal, and coronal sections of each sample, as well as shoulder widths. RESULTS: The three fabrication processes showed significant differences in intervals between post-and-core prostheses and root canal walls, diameters of all parts of cores, and shoulder widths. Scanning impressions showed significant advantages in the main part of post-and-cores in incisors and premolars, while the scanning wax-pattern process showed obvious inferiorities in premolars and molars. As to core spatial size, values of measured sites in the scanning impression process were closer to the standard than those of the traditional process, while differences between the measured value of the scanning wax-pattern process were much more obvious than in the traditional process. CONCLUSIONS: The use of digital custom post-and-core scanning impressions improved the rationality and precision of post-and-core dimensions compared with two other processes.

Nimbolide targeting SIRT1 mitigates intervertebral disc degeneration by reprogramming cholesterol metabolism and inhibiting inflammatory signaling.

Inflammation, abnormal cholesterol metabolism, and macrophage infiltration are involved in the destruction of the extracellular matrix of the nucleus pulposus (NP), culminating in intervertebral disc degeneration (IDD). Whether nimbolide (Nim), a natural extract, can alleviate IDD is unclear. In this study, we demonstrated that Nim promotes cholesterol efflux and inhibits the activation of the nuclear factor kappa B (NF-κB) and mitogen-activated protein kinase (MAPK) signaling pathways by activating sirtuin 1 (SIRT1) in nucleus pulposus cells (NPCs) during inflammation. Thus, Nim balanced matrix anabolism and catabolism of NPCs. However, the inhibition of SIRT1 significantly attenuated the effects of Nim. We also found that Nim promoted the expression of SIRT1 in RAW 264.7, which enhanced the proportion of M2 macrophages by facilitating cholesterol homeostasis reprogramming and impeded M1-like macrophages polarization by blocking the activation of inflammatory signaling. Based on these results, Nim can improve the microenvironment and facilitate matrix metabolism equilibrium in NPCs. Furthermore, in vivo treatment with Nim delayed IDD progression by boosting SIRT1 expression, modulating macrophage polarization and preserving the extracellular matrix. In conclusion, Nim may represent a novel therapeutic strategy for treating IDD.

Mechanical properties of bulk-fill resin composites with single increment up to 4 mm: A novel mechanical strength test.

PURPOSE: To evaluate the mechanical properties of two brands of bulk-fill resin composites placed in a single increment up to 4 mm thickness via a novel mechanical strength test and provide related explanations. METHODS: Light transmission (LT), translucency parameter (TP), color difference (ΔE), Vickers hardness (HV) of two bulk-fill resin composites (Filtek Bulk Fill Posterior, Tetric N-Ceram Bulk Fill) and two conventional resin composites (Z100, Spectrum TPH) were evaluated. A novel flexural strength (FS) test method was applied for bulk-fill resin composite to determine the FS value of the bottom composites at depths of 1, 2, 3, and 4 mm after 24 hours of aging treatment (3 months water storage and 15,000 thermal cycles). The conventional resin composites were also tested for FS and all the FS results were subjected to Weibull analysis. Degree of conversion (DC) in the bulk-fill resin composites, light-cured at depths of 1, 2, 3, and 4 mm and conventional resin composites at depths of 2 and 4 mm, were assessed by FTIR. RESULTS: Both bulk-fill resin composites showed higher light transmission and translucency than that of conventional ones at each of the same thicknesses (1, 2, 3, 4 mm), wherein their flexural strength was not affected by depth. The Weibull analysis suggested both bulk-fill resin composites achieved good reliability and structural integrity under each curing thickness. Vickers hardness was affected by the material type and thickness. Bulk-fill resin composites showed a decrease in degree of conversion between 1 mm and 4 mm, but both were over 55%. CLINICAL SIGNIFICANCE: Filtek Bulk Fill Posterior, Tetric N-Ceram Bulk Fill achieved acceptable mechanical properties when cured at depths of up to 4 mm, which was beneficial from their optical and polymerized properties.

Evaluation of a half-digital technique for fabricating customized post-cores: A pilot study.

Objectives: The current half-digital post-core fabrication technique can replace the conventional methods; however, it does not consider the impact occlusion has on the digital design. This study proposed a half-digital workflow that integrated intracanal impression with dentition scanning, and evaluated the accuracy of the post-cores fabricated by it. Methods: Standard models with three extracted teeth (a central incisor, a premolar, and a molar) were prepared. Eight post-cores were fabricated for each tooth by the half-digital technique and eight by the conventional technique as controls. Scanning was performed with a microcomputed tomography system. The volume of the overall space (VOS) between the post and canal wall, the space areas in three standardized sections (A, B, and C), and the apical gap (AG) were calculated and statistically analyzed using two-way analysis of variance. Statistical significance was set at p < 0.05. Results: The two techniques differed significantly in the VOS (p < 0.05), section B (p < 0.05), and AG (p < 0.05) of all three teeth but not for sections A (p = 0.099) and C (p = 0.636). Conclusions: The half-digital technique investigated in this study could produce better-fitting customized post-cores than the conventional technique.

Thoracolumbar fascia injury in osteoporotic vertebral fracture: the important concomitant damage.

BACKGROUND: Thoracolumbar fascia injury (FI) is rarely discussed in osteoporotic vertebral fracture (OVF) patients in previous literature and it is usually neglected and treated as an unmeaning phenomenon. We aimed to evaluate the characteristics of the thoracolumbar fascia injury and further discuss its clinical significance in the treatment of kyphoplasty for osteoporotic vertebral fracture (OVF) patients. METHODS: Based on the presence or absence of FI, 223 OVF patients were divided into two groups. The demographics of patients with and without FI were compared. The visual analogue scale and Oswestry disability index scores were compared preoperatively and after PKP treatment between these groups. RESULTS: Thoracolumbar fascia injuries were observed in 27.8% of patients. Most FI showed a multi-level distribution pattern which involved a mean of 3.3 levels. Location of fractures, severity of fractures and severity of trauma were significantly different between patients with and without FI. In further comparison, severity of trauma was significantly different between patients with severe and non-severe FI. In patients with FI, VAS and ODI scores of 3 days and 1 month after PKP treatment were significantly worse compared to those without FI. It showed the same trend in VAS and ODI scores in patients with severe FI when compared to those patients with non-severe FI. CONCLUSIONS: FI is not rare in OVF patients and presents multiple levels of involvement. The more serious trauma suffered, the more severe thoracolumbar fascia injury presented. The presence of FI which was related to residual acute back pain significantly affected the effectiveness of PKP in treating OVFs. TRIAL REGISTRATION: retrospectively registered.

Polyphenols Can Improve Resin-Dentin Bond Durability by Promoting Amorphous Calcium Phosphate Nanoparticles to Backfill the Dentin Matrix.

Objective: To investigate the effects of proanthocyanidins (PA), myricetin, resveratrol, and kaempferol on the modification of dentin collagen and the inhibition of matrix metalloproteinase (MMP) activity, and to evaluate their contributions to the biomimetic remineralization and resin-dentin bonding performance. Methods: Attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and in situ zymography were applied to verify the collagen modification and MMP activity inhibition induced by these four polyphenols. Scanning electron microscopy/energy dispersive spectrometer (SEM/EDS) analysis, X-ray diffraction (XRD), ATR-FTIR, Vickers hardness numbers (VHN), and micro-computed tomography (micro-CT) were performed to characterize the remineralized dentin. Microtensile bond strength (µTBS) and nanoleakage were investigated to evaluate the effects of the four polyphenols on resin-dentin bonding durability. Results: ATR-FTIR and in situ zymography confirmed that these four polyphenols could modify dentin collagen and inhibit MMP activity, respectively. Chemoanalytic characterization exhibited the efficacies of the four polyphenols in promoting dentin biomimetic remineralization. The surface hardness of PA-pretreated dentin was the greatest. Micro-CT results demonstrated that the PAs group possessed the highest amount of dentin surface minerals and the lowest amount of deep-layer minerals. The surface and deep-layer mineral contents of the Myr group were higher than Res and Kae groups. Treatment with these four polyphenols significantly increased the initial µTBS compared with the control group without primer conditioning. µTBS decreased significantly during aging, and the decrease was more severe in the PAs and Kae groups than in the Myr and Res groups. With or without aging, the polyphenol groups exhibited relatively less fluorescence. However, the Myr and Res groups showed less serious nanoleakage after aging. Conclusion: PA, myricetin, resveratrol, and kaempferol can modify dentin collagen, inhibit MMP activity, promote biomimetic remineralization, and improve resin-dentin bond durability. Compared with PA and kaempferol, myricetin and resveratrol are more effective in improving resin-dentin bonding.

Isoginkgetin-loaded reactive oxygen species scavenging nanoparticles ameliorate intervertebral disc degeneration via enhancing autophagy in nucleus pulposus cells.

Excessive reactive oxygen species (ROS) in nucleus pulposus cells (NPCs) promote extracellular matrix (ECM) degradation and cellular inflammatory responses by activating a variety of cellular pathways, ultimately inducing cell apoptosis and leading to the development of low back pain. Here, we designed and fabricated an isoginkgetin-loaded ROS-responsive delivery system (IGK@SeNP) based on diselenide block copolymers. Successfully encapsulated IGK was released intelligently and rapidly in a microenvironment with high ROS levels in degenerative disc. Controlled-release IGK not only efficiently scavenged ROS from the intervertebral disc together with diselenide block copolymers but also effectively enhanced autophagy in NPCs to inhibit ECM degradation and cell apoptosis, and showed significant therapeutic effects in the rat intervertebral disc degeneration (IDD) model. Overall, the synergistic effects of IGK@SeNP in ROS scavenging and autophagy enhancement endowed it with an attractive therapeutic strategy for IDD treatment.

Modulation of Bleomycin-induced Oxidative Stress and Pulmonary Fibrosis by Ginkgetin in Mice via AMPK.

BACKGROUND: Ginkgetin, a flavonoid extracted from Ginkgo biloba, has been shown to exhibit broad anti-inflammatory, anticancer, and antioxidative bioactivity. Moreover, the extract of Ginkgo folium has been reported on attenuating bleomycin-induced pulmonary fibrosis, but the anti-fibrotic effects of ginkgetin are still unclear. This study was intended to investigate the protective effects of ginkgetin against experimental pulmonary fibrosis and its underlying mechanism. METHODS: In vivo, bleomycin (5 mg/kg) in 50 µL saline was administrated intratracheally in mice. One week after bleomycin administration, ginkgetin (25 or 50 mg/kg) or nintedanib (40 mg/kg) was administrated intragastrically daily for 14 consecutive days. In vitro, the AMPK-siRNA transfection in primary lung fibroblasts further verified the regulatory effect of ginkgetin on AMPK. RESULTS: Administration of bleomycin caused characteristic histopathology structural changes with elevated lipid peroxidation, pulmonary fibrosis indexes, and inflammatory mediators. The bleomycin- induced alteration was normalized by ginkgetin intervention. Moreover, this protective effect of ginkgetin (20 mg/kg) was equivalent to that of nintedanib (40 mg/kg). AMPK-siRNA transfection in primary lung fibroblasts markedly blocked TGF-ß1-induced myofibroblasts transdifferentiation and abolished oxidative stress. CONCLUSION: All these results suggested that ginkgetin exerted ameliorative effects on bleomycininduced oxidative stress and lung fibrosis mainly through an AMPK-dependent manner.

Neural Network-Based Adaptive Height Tracking Control of Active Air Suspension System with Magnetorheological Fluid Damper Subject to Uncertain Mass and Input Delay.

In this paper, we present a novel robust adaptive neural network-based control framework to address the ride height tracking control problem of active air suspension systems with magnetorheological fluid damper (MRD-AAS) subject to uncertain mass and time-varying input delay. First, a radial basis function neural network (RBFNN) approximator is designed to compensate for unmodeled dynamics of the MRD. Then, a projector-based estimator is developed to estimate uncertain parameter variation (sprung mass). Additionally, to deal with the effect of input delay, a time-delay compensator is integrated in the adaptive control law to enhance the transient response of MRD-AAS system. By introducing a Lyapunov-Krasovskii (LK) functional, both ride height tracking and estimator errors can robustly converge towards the neighborhood of the desired values, achieving uniform ultimate boundness. Finally, comparative simulation results based on a dynamic co-simulator built in AMESim 2021.2 and Matlab/Simulink 2019(b) are given to illustrate the validity of the proposed control framework, showing its effectiveness to operate ride height regulation with MRD-AAS systems accurately and reliably under random road excitations.

In vitro comparison of bonding to zirconia- or glass- based ceramics between flowable resin composites and composite resin cements.

PURPOSE: To evaluate and compare the bonding of flowable resin composites and light-cured resin cements to dental ceramics. METHODS: Grit-blasted zirconia plates were primed with MDP-containing adhesive. Lithium disilicate glasses plates were etched with HF and primed with silane. Two flowable resin composites with high (CM: 75 wt%/62 vol%) and low (BF: 67.3 wt%/47 vol%) filler contents, and two resin cements, again with high (C: 72 wt%/69 vol%) and low (R: 66 wt%/47 vol%) filler contents, were bonded to both types of pretreated ceramics. Shear bond strength (SBS) was measured after 24 hours water storage or 10,000 times thermocycling between 5 and 55°C. The viscosities and film thicknesses of the four resin-based luting agents (RBLAs) were also explored by rotational rheometer and metallurgical microscope severally. RESULTS: Different RBLAs provided statistically different SBS values, with the high-filler specimens exhibiting higher SBS values than the low-filler specimens. The viscosities decreased in the order C > R > BF > CM. The film thicknesses for the BF and C groups were higher than those of the CM and R groups. CLINICAL SIGNIFICANCE: This study provides evidence that flowable resin composites with high filler contents and low viscosities may serve as an alternative to light-cured resin cements for luting zirconia or lithium disilicate glass. This expands the range of light-cured luting agents available for bonding of veneers or other thin restorations, which is of great benefit to clinical practice.

The roles of 10-methacryloyloxydecyl dihydrogen phosphate and its calcium salt in preserving the adhesive-dentin hybrid layer.

OBJECTIVES: 10-Methacryloyloxydecyl dihydrogen phosphate (MDP) has been regarded as the most effective dentin-bonding monomer for more than 20 years. Although the dentin-bonding promoting effect of MDP has been well demonstrated, the mechanisms by which it benefits the stably of collagen within the adhesive-dentin hybrid layer are not currently fully understood. The objective of this study was to investigate the roles of MDP and its calcium salt in preserving the adhesive-dentin hybrid layer. METHODS: MDP-conditioned collagen was investigated by Fourier-transform infrared spectroscopy, Ultraviolet-visible spectroscopy, and molecular docking. The structural changes to the dentin surface upon acid-etching and MDP-conditioning were observed by SEM. X-ray diffraction and nuclear magnetic resonance were used to investigate the chemical interactions between MDP and HAp. The collagen-protecting effects of MDP and its Ca salt were investigated using in-situ zymography, rhMMP-9 colorimetric assay, hydroxyproline assay, and molecular docking. RESULTS: MDP forms a stable collagen-phosphate complex through hydrogen bonding with the collagen in dentin. Furthermore, it generates MDP-Ca salts that are deposited on the dentin collagen scaffold, protecting it from degradation. Moreover, both free MDP and the MDP-Ca salt inhibit matrix metallopeptidase and exogenous proteases, with the inhibitory effect of the calcium salt being significantly stronger than that of the free form. SIGNIFICANCE: MDP-based adhesives preserve the collagen within the hybrid layer by simultaneously improving collagen's resistance to exogenous enzymes and inhibiting MMP activity, both of which contribute to the longevity of dentin-resin bonding.

Interactions of two phosphate ester monomers with hydroxyapatite and collagen fibers and their contributions to dentine bond performance.

OBJECTIVES: To evaluate the interactions of two phosphate ester monomers [10-methacryloyloxydecyl dihydrogen phosphate (10-MDP) and dipentaerythritol penta-acrylate phosphate (PENTA)] with hydroxyapatite and collagen and understand their influence on dentine bonding. METHODS: Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, nuclear magnetic resonance, ultraviolet-visible, and molecular docking were applied for separately evaluating the interactions of two monomers with hydroxyapatite and collagen. Hydrophilicity tests and morphological observation were employed to characterize pretreated dentine. Microtensile bond strength (µTBS) and nanoleakage were investigated to evaluate the bonding performance. Hydroxyproline assay, in situ zymography, and matrix metalloproteinase-9 (MMP-9) activity assay were used to confirm the MMP inhibition. RESULTS: Chemoanalytic characterization confirmed the interactions of 10-MDP and PENTA with hydroxyapatite and collagen. The interactions of PENTA were weaker than 10-MDP. PENTA possessed better dentine tubule sealing after etching than 10-MDP. Dentine treated with PENTA was more hydrophilic than 10-MDP. 10-MDP and PENTA treating significantly increased the initial µTBS than the control group without primer conditioning. µTBS decreased significantly during aging, and the decrease was more severe in the PENTA group than 10-MDP. The 10-MDP and PENTA groups exhibited relatively less fluorescence than the control. The relative inhibition percentages of MMP-9 decreased in the order of 10-MDP-Ca salt, 10-MDP and PENTA. The 10-MDP, PENTA, and 10-MDP-Ca salt groups showed significantly lower hydroxyproline contents than the control. CONCLUSIONS: Although PENTA adsorbed on hydroxyapatite, it did not form a stable calcium salt. The interactions of 10-MDP with hydroxyapatite and collagen are different than those of PENTA. CLINICAL SIGNIFICANCE: The sealing of dentinal tubules by PENTA and the inhibition of MMP by 10-MDP and its calcium salts contribute to improving the dentine bonding durability.

Role of 3-Methacryloxypropyltrimethoxysilane in Dentin Bonding.

In this study, we aimed to examine the effect of 3-methacryloxypropyltrimethoxysilane (MPS) on dentin collagen and the impact of MPS and 10-methacryloyloxydecyl dihydrogen phosphate (MDP) together and separately on resin-dentin bonding. Eight groups of primers were prepared: control group, MDP, MPS5, MPS5 + MDP, MPS10, MPS10 + MDP, MPS15, and MPS15 + MDP. The potential interaction between MPS and collagen was assessed by molecular dynamics, contact angle measurement, zeta potential measurement, and chemoanalytic characterization using X-ray photoelectron spectroscopy, Raman spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, and ultraviolet-visible spectroscopy. Microtensile bond strength (µTBS) and nanoleakage were evaluated after 24 h or 12 months of water storage. In situ zymography was used to evaluate the enzyme activity at the bonded interface. According to chemoanalytic characterization and molecular dynamics, a weak interaction between MPS and collagen was observed. MPS enhanced the hydrophobicity and negative charge of the collagen surface (P < 0.05). Applying an MDP-containing primer increased µTBS (P > 0.05) and reduced fluorescence after 24 h of water storage. Water storage for 12 months decreased µTBS (P < 0.05) and increased nanoleakage for all groups. MPS conditioning did not change µTBS and nanoleakage after 24 h of water storage or aging. The MPS10 + MDP and MPS15 + MDP groups presented more silver nitrate and µTBS decrease than the MDP group (P < 0.05). These results indicated that MPS had a weak interaction with collagen that enhanced its surface negative charge and hydrophobicity without adversely affecting dentin bonding. However, compared to MDP alone, mixing MDP with MPS impaired their effectiveness and made the dentin bonding unstable.

Comparison of stress distribution between zirconia/alloy endocrown and CAD/CAM multi-piece zirconia post-crown: three-dimensional finite element analysis.

OBJECTIVES: This study aimed to evaluate a digital multi-piece zirconia post-crown to restore a mandibular second molar with extensive coronal loss and limited restoration space, and to compare the stress distribution between endocrowns made of zirconia or alloy and CAD/CAM multi-piece zirconia post-crowns. MATERIAL AND METHODS: Four three-dimensional finite element analysis models of a mandibular second molar with extensive coronal loss and limited restoration space were created as follows: (A) intact molar; (B) zirconia endocrown restored molar; (C) multi-piece post-crown restored-molar with tapered nail; (D) multi-piece post-crown restored molar with T-shaped nail. Models C and D were divided into two subgroups according to the material type: C1/D1, zirconia; C2/D2, NiCr alloy. The maximum modified von Mises failure criterion (mvM) stresses were calculated, and the stress distribution was recorded to analyze the effects of the restoration and material types on the biomechanical properties of dentin and prosthesis. RESULTS: The maximum mvM stress of dentin in model B (33.80 MPa) was lower compared with models C (C1, 37.81 MPa; C2, 36.36 MPa) and D (D1, 36.34 MPa; D2, 34.97 MPa) under vertical load, but the opposite was observed under oblique load. The highest mvM stress was concentrated in the nail region located in the root canal, and the T-shaped nail values were greater than the tapered nail, whereas model D with T-shaped nail showed a lower mvM stress level in dentin compared with Model C with tapered nail. CONCLUSIONS: The digital multi-piece zirconia post-crown is a potential approach to restore mandibular second molars with extensive coronal loss and limited restoration space. CLINICAL RELEVANCE: The digital multi-piece zirconia post-crown has potential to restore mandibular second molars with extensive coronal loss and limited restoration space using an innovative approach.

Evaluation of intraoral optical scanning accuracy for fine structure reconstruction and occlusal records of inlay/onlay preparations.

AIM: The present study aimed to determine the impact of different degrees of salivary contamination and variations in occlusal force during intraoral scanning of inlay/onlay cavities on the accuracy of fine structure reconstruction and occlusal records. MATERIALS AND METHODS: Digital data of inlay/onlay models, collected using an intraoral scanner, were divided into 40 groups according to the restoration type (onlay or inlay), salivary contamination level (none, completely dry; mild, moist but not visually completely apparent; moderate, half-filled cavity; severe, filled-up cavity), and simulated occlusal force (0, 2, 4, 6 or 8 kg). The acquired 120 datasets were used to measure the average interocclusal space and cavity buccolingual internal angle. RESULTS: Salivary contamination and occlusal force did affect the occlusal contact (P < 0.001), but restoration type did not (P > 0.05). An interaction was found between inlay type and salivary contamination (P < 0.001), but not between occlusal force and salivary contamination (P > 0.05). Salivary contamination also affected the accuracy of fine structure reconstruction (P < 0.001), but restoration type did not (P > 0.05), and no interaction was found between the two factors (P > 0.05). The difference in the measured internal angle increased with the increase in salivary contamination. CONCLUSIONS: Intraoral optical scanning of inlay/onlay preparations was reliable for recording occlusal contact but showed uncertainty in cavity fine structure reconstruction when moderate or severe salivary contamination was present in the cavity. Nevertheless, a moist cavity surface with no visually apparent salivary contamination is acceptable. (Int J Comput Dent 2022;25(3):257-265; doi: 10.3290/j.ijcd.b2599691).