Production of Jet Fuel Range Aromatics by Alkylation of Benzene with Olefins over Bifunctional Ga/ZSM-5 Catalyst.

Aromatic components of C8-C15 are playing indispensable roles in multi-functional properties of jet fuel. Here, we reported the controllable alkylation of benzene with mixed olefins of ethylene and propylene toward C8-C15 aromatic hydrocarbons for jet fuels over the bifunctional Ga/ZSM-5 catalyst. The resultant 2Ga/ZSM-5 exhibited a superior selectivity of 86.4% (yield of 55.5%) to C8-C15 range aromatics, at benzene conversion of 40.3%, ethylene and propylene conversion of 99.5% and 99.2%, respectively. The incorporation of Ga species could effectively weaken the strong acid sites of ZSM-5 and endow 2Ga/ZSM-5 catalyst with appropriate acidity, therefore facilitating the benzene alkylation process and suppressing the undesired hydrogen transfer or aromatization side reactions as well, thus improving the yield of desired C8-C15aromatics for jet fuels. This work provided insight into the development of promising bifunctional catalyst for the oriented transformation of biomass-derived chemicals to aviation fuels.

Prevalence and assemblage identified of Giardia duodenalis in zoo and farmed Asiatic black bears (Ursus thibetanus) from the Heilongjiang and Fujian Provinces of China.

Captive and free-living wildlife serve as significant hosts for Giardia duodenalis. Asiatic black bears, valued for their economic and medicinal importance, are extensively farmed in China and also prevalent in zoos. However, studies on G. duodenalis in these animals in China are limited. Here, 218 feces samples of Asiatic black bears were collected: 36 from a zoo in Heilongjiang Province, and 182 from a farm in Fujian Province. Nested PCR of the SSU rRNA gene, followed by sequencing, was employed to determine the frequency and assemblage distribution of G. duodenalis. Positive samples underwent further analysis through multilocus genotyping (MLG) by amplifying the genes for glutamate dehydrogenase (gdh), ß-giardin (bg), and triosephosphate isomerase (tpi). Of the 218 samples, G. duodenalis was detected in 22 cases at the SSU rRNA gene locus, including three from Heilongjiang and 19 from Fujian. Three assemblages were identified: A (n = 1), B (n = 16), and E (n = 2) in Fujian; and B (n = 3) in Heilongjiang. Out of the 22 positive samples, 20, 19, and 9 were effectively amplified and sequenced across the tpi, gdh, and bg loci, respectively. Seven samples were genotyped successfully at all three loci, identifying MLG-B1 (n = 1), MLG-B2 (n = 1), and MLG-B3 (n = 1), MLG-B4 (n = 1), MLG-B5 (n = 2), and MLG-B6 (n = 1) as the six assemblage B MLGs. This study marks the first documentation of G. duodenalis in Asiatic black bears in captivity in Fujian and Heilongjiang. The identification of zoonotic assemblages A and B, along with E, underscores potential public health concerns.

Title: Prévalence et assemblages de Giardia duodenalis chez les ours noirs d'Asie (Ursus thibetanus) d'élevage et de zoos dans les provinces chinoises du Heilongjiang et du Fujian. Abstract: Les faunes captive et libre incluent des hôtes importants pour Giardia duodenalis. Les ours noirs d'Asie, appréciés pour leur importance économique et médicinale, sont couramment élevés en Chine et répandus dans les zoos. Cependant, les études sur G. duodenalis chez ces animaux en Chine sont limitées. Ici, 218 échantillons d'excréments d'ours noirs d'Asie ont été collectés, 36 dans un zoo de la province du Heilongjiang et 182 dans une ferme de la province du Fujian. La PCR imbriquée de l'ARNr SSU, suivie d'un séquençage, a été utilisée pour déterminer la fréquence et la distribution des assemblages de G. duodenalis. Les échantillons positifs ont subi une analyse plus approfondie par génotypage multilocus (MLG) en amplifiant les gènes de la glutamate déshydrogénase (gdh), de la ß-giardine (bg) et de la triosephosphate isomérase (tpi). Sur les 218 échantillons, G. duodenalis a été détecté dans 22 cas par le locus du gène de l'ARNr SSU, dont trois du Heilongjiang et 19 du Fujian. Trois assemblages ont été identifiés : A (n = 1), B (n = 16) et E (n = 2) dans le Fujian, et B (n = 3) dans le Heilongjiang. Sur les 22 échantillons positifs, 20, 19 et 9 ont été efficacement amplifiés et séquencés respectivement pour les loci tpi, gdh et bg. Sept échantillons ont été génotypés avec succès sur les trois loci, identifiant MLG-B1 (n = 1), MLG-B2 (n = 1) et MLG-B3 (n = 1), MLG-B4 (n = 1), MLG- B5 (n = 2) et MLG-B6 (n = 1) comme les six assemblages MLG B. Cette étude marque la première investigation de G. duodenalis chez les ours noirs d'Asie en captivité au Fujian et au Heilongjiang. L'identification des assemblages zoonotiques A et B, ainsi que E, souligne des problèmes potentiels de santé publique.

Molecular prevalence, subtype distribution, and zoonotic potential of Blastocystis sp. in wild rodents and shrews inhabiting Zhejiang province of China.

Introduction: Globally, rodents and shrew populations constitute crucial elements of diverse environments and animal communities. It is imperative to study their population dynamics to mitigate any potential negative impact on humans, as they can be involved in the transmission of critical zoonotic agents, such as Blastocystis. Therefore, this study aimed to identify the prevalence and genetic composition of Blastocystis in wild rodents and shrews residing in the Zhejiang provinces of China. Methods: A total of 652 wild rodents and and shrews were captured from three different regions in Zhejiang Province from April 1st to October 31, 2023. The DNA was isolated by collecting fresh feces from the intestines of each rodent or and shrew. Rodent and shrew species were examined by vertebrate cytochrome b (cytb) analysis and PCR amplification. Blastocystis was also found in all fecal samples using PCR analysis and sequencing of the partial small subunit of ribosomal RNA (SSU rRNA) gene. Results: Among all the samples, 6.6% (43/652) showed a positive result for Blastocystis. In the results, 6 species of rodent and shrew were identified with Blastocystis, including Apodemus agrarius (n = 36) (2.8%), Niviventer confucianus (n = 75) (17.3%), Rattus losea (n = 18) (5.6%), R. norvegicus (n = 155) (2.6%), R. tanezumi (n = 86) (3.5%), and Suncus murinus (n = 282) (7.4%). The existence of 6 Blastocystis subtypes, ST4 (n = 33), ST1 (4), ST7 (n = 3), ST2 (n = 1), ST3 (n = 1), and ST5 (n = 1), were confirmed by sequence analysis. Discussion: Based on the molecular data obtained, the wild rodents and shrews under investigation were found to be concurrently infected with zoonotic subtypes of Blastocystis, including ST1 to ST5 and ST7. This suggests that these animals could potentially pose a zoonotic threat to humans and other animals susceptible to Blastocystis infection.

Molecular detection and genetic variability of Cryptosporidium spp. in wild Asian house shrews (Suncus murinus) from southern Zhejiang province, China.

Shrews play a crucial role as repositories for diverse pathogens linked to zoonotic infectious diseases. However, the genetic information regarding Cryptosporidium in Chinese shrews remains unexplored. The objectives of this study were twofold: to determine the occurrence rate of Cryptosporidium spp. in wild shrews residing in the southern part of Zhejiang Province, China, and to investigate their genetic characteristics. A total of 282 wild shrews were captured between April and October of 2023. The detection of Cryptosporidium in fecal samples, collected from each animal's rectum, was performed using PCR and sequencing of the partial small subunit of ribosomal RNA (SSU rRNA) gene. The 60-kDa glycoprotein (gp60) gene was utilized to further subtype the positive samples of C. viatorum and C. parvum. All animals were identified as Suncus murinus, and a positive result for Cryptosporidium was obtained in 14.2 % (40/282) of the samples. The following species and genotypes were identified: C. ratti (n = 19), C. parvum (n = 2), C. viatorum (n = 1), Cryptosporidium rat genotype IV (n = 13), and Cryptosporidium skunk genotype (n = 5). Furthermore, the subtypes IIdA15G1 and XVdA3 were detected within C. parvum and C. viatorum, respectively. Molecular evidence indicates that S. murinus is concurrently infected with rodent-adapted and zoonotic species/genotypes, actively contributing to the dissemination of cryptosporidiosis.

[Comparative metabolomics analysis of metabolic pathways in the high-yielding mutant strain of avilamycin].

Avilamycin (AVI) is an oligosaccharide antibiotic that has strong inhibitory effect on Gram-positive bacteria. It is widely used in livestock and poultry farming. However, the use of traditional breeding techniques and immature fermentation process have become the key factors limiting its commercialization. In this study, we used comparative metabolomics techniques to examine the difference in intracellular metabolism between a high-yield AVI mutant strain modified by ribosome engineering technology and the parental strain. GC-MS analysis was conducted on mycelia samples taken on days 4, 6, and 8 of fermentation, resulting in the detection of a total of 112 compounds. After comparison with the NIST library, 29 intracellular metabolites were accurately identified. Two-dimensional principal component analysis (PCA) revealed significant differences in metabolites between the mutant strain and the parental strain at different time points. Orthogonal partial least squares-discriminant analysis (OPLS-DA) identified 11 intracellular metabolites that were closely related to AVI biosynthesis. KEGG metabolic pathway enrichment analysis showed that avilamycin synthesis was closely related to carbohydrate metabolism and amino acid metabolism. Six key differential metabolites were selected: L-valine, L-serine, L-alanine, D-galactose, D-cellobiose, and D-glucose. Upregulation of these metabolites in the mutant strain enhanced its metabolic flow for AVI synthesis. After 8 days of fermentation, the mutant strain produced 76.86% more AVI than the parental strain. The findings of this study serve as reference for the future rational optimization of avilamycin fermentation.

Enterocytozoon bieneusi in Wild Rats and Shrews from Zhejiang Province, China: Occurrence, Genetic Characterization, and Potential for Zoonotic Transmission.

Globally, Enterocytozoon bieneusi has been detected in humans and various animal hosts. Wild rats and shrews have the potential to act as carriers of E. bieneusi, facilitating the parasite's transmission to humans and domestic animals. We aimed to investigate the prevalence of E. bieneusi in 652 wild rats and shrews from Zhejiang Province, China, by amplifying the internal transcribed spacer (ITS) region of rDNA through polymerase chain reaction (PCR). To determine animal species, we amplified the Cytochrome b (Cyt-b) gene in their fecal DNA using PCR. Furthermore, we determined the genotype of E. bieneusi by amplifying the ITS region of rDNA through PCR. Genetic traits and zoonotic potential were evaluated using similarity and phylogenetic analyses. Suncus murinus (n = 282) and five rat species, Rattus losea (n = 18), Apodemus agrarius (n = 36), Rattus tanezumi (n = 86), Rattus norvegicus (n = 155), and Niviventer niviventer (n = 75), were identified. The average infection rate of E. bieneusi was 14.1% (92/652) with 18.1% (51/282) in S. murinus and 11.1% (41/370) in rats (27.8% in R. losea, 22.2% in A. agrarius, 10.5% in R. tanezumi, 8.4% in R. norvegicus, and 8.0% in N. niviventer). Thirty-three genotypes were identified, including 16 known genotypes. The most commonly known genotypes were HNR-VI (n = 47) and Peru11 (n = 6). Type IV, KIN-1, SHW7, and HNPL-II were each found in two samples, while Macaque4, CH5, K, Henan-III, Henan-V, HNP-II, HNPL-I, HNPL-III, HNHZ-II, and HNHZ-III were each found in one sample. Additionally, 17 novel genotypes were discovered: WZR-VIII (n = 5), WZR-I to WZR-VII, WZR-IX to WZR-XII, and WZSH-I to WZSH-V (n = 1 each). Those 33 genotypes were divided into three groups: Group 1 (n = 25), Group 2 (n = 3), and Group 13 (n = 5). The initial report underscores the extensive occurrence and notable genetic diversity of E. bieneusi in wild rats and shrews from Zhejiang province, China. These results suggest that these animals play a pivotal role in the transmission of E. bieneusi. Furthermore, animals carrying the zoonotic genotypes of E. bieneusi pose a serious threat to residents.

A 3D-FEA study on the impact of different preparation forms and materials on posterior occlusal veneers.

OBJECTIVES: To study the stress distribution and bonding performance in posterior occlusal veneers and tooth bodies under different preparation forms and materials. METHODS: An isolated lower right first molar was prepared with non-retention type (type A), cavity-retained type (type B), and encircling-retention type (type C) forms. MicroCT images of the tooth were obtained and digitally converted into three-dimensional solid models. Three-dimensional models of veneers for the three abutment teeth were designed, fabricated, and divided into nine models (AEM, ALU, AVE, BEM, BLU, BVE, CEM, CLU, and CVE) according to the material used (E.max CAD [EM], Lava Ultimate [LU] and Vita Enamic [VE]). Three-dimensional finite element stress analysis was performed by applying vertical and oblique forces (200 N) to simulate chewing loads using ABAQUS. Finally, an adhesive stiffness degradation diagram was obtained using the rotatory dislocation simulation method. RESULTS: The BEM model had the largest equivalent stress extreme value (160.50 MP A) when a vertical load was applied to the veneers, while there was no significant difference when it was applied to dental tissues. The equivalent stress extreme values of each part under an oblique load were significantly greater than those under a vertical load. The AEM model had the largest values when the loads were applied to the veneers (350.60 MP A) and the dental tissues (40.13 MP A). The equivalent stress extreme values of the veneers were ranked as LU < VE < EM for different materials, and LU > VE > EM for dental tissues. Bonding performance results were C > B ≈ A and LU > VE > EM. CONCLUSIONS: The cavity-retained type better protected the veneers and dental tissues than the non-retention and encircling-retention types under lateral forces. E.max CAD material, with a high elastic modulus, reduced the stress transmitted to the remaining dental tissues. Lava Ultimate exhibited the best bonding performance.

High-Performance Adaptive Weak Fault Diagnosis Based on the Global Parameter Optimization Model of a Cascaded Stochastic Resonance System.

Stochastic resonance (SR), as a type of noise-assisted signal processing method, has been widely applied in weak signal detection and mechanical weak fault diagnosis. In order to further improve the weak signal detection performance of SR-based approaches and realize high-performance weak fault diagnosis, a global parameter optimization (GPO) model of a cascaded SR system is proposed in this work. The cascaded SR systems, which involve multiple multi-parameter-adjusting SR systems with both bistable and tri-stable potential functions, are first introduced. The fixed-parameter optimization (FPO) model and the GPO models of the cascaded systems to achieve optimal SR outputs are proposed based on the particle swarm optimization (PSO) algorithm. Simulated results show that the GPO model is capable of achieving a better SR output compared to the FPO model with rather good robustness and stability in detecting low signal-to-noise ratio (SNR) weak signals, and the tri-stable cascaded SR system has a better weak signal detection performance compared to the bistable cascaded SR system. Furthermore, the weak fault diagnosis approach based on the GPO model of the tri-stable cascaded system is proposed, and two rolling bearing weak fault diagnosis experiments are performed, thus verifying the effectiveness of the proposed approach in high-performance adaptive weak fault diagnosis.

Research on a Bearing Fault Enhancement Diagnosis Method with Convolutional Neural Network Based on Adaptive Stochastic Resonance.

As a powerful feature extraction tool, a convolutional neural network (CNN) has strong adaptability for big data applications such as bearing fault diagnosis, whereas the classification performance is limited when the quality of raw signals is poor. In this paper, stochastic resonance (SR), which provides an advanced feature enhancement approach for weak signals with strong background noise, is introduced as a data pre-processing method for the CNN to improve its classification performance. First, a multiparameter adjusting bistable Duffing system that can achieve SR under large-parameter weak signals is introduced. A hybrid optimization algorithm (HOA) combining the genetic algorithm (GA) and the simulated annealing (SA) is proposed to adaptively obtain the optimized parameters and output signal-to-noise ratio (SNR) of the Duffing system. Therefore, the data optimization based on the multiparameter-adjusting SR of Duffing system can be realized. An SR-based mapping method is further proposed to convert the outputs of the Duffing system into grey images, which can be further processed by a normal CNN with batch normalization (BN) layers and dropout layers. After verifying the feasibility of the HOA in multiparameter optimization of the Duffing system, the bearing fault data set from the CWRU bearing data center was processed by the proposed fault enhancement classification and identification method. The research showed that the weak features of the bearing signals could be enhanced significantly through the adaptive multiparameter optimization of SR, and classification accuracies for 10 categories of bearing signals could achieve 100% and those for 20 categories could achieve more than 96.9%, which is better than other methods. The influences of the population number on the classification accuracies and calculation time were further studied, and the feature map and network visualization are presented. It was demonstrated that the proposed method can realize high-performance fault enhancement classification and identification.

Factors affecting the outcome of full pulpotomy in permanent posterior teeth diagnosed with reversible or irreversible pulpitis.

This study aimed to investigate the factors affecting the success rate of full pulpotomy in permanent posterior teeth with pulpitis. The study included 105 permanent posterior teeth clinically diagnosed as reversible or irreversible pulpitis in 92 patients aged 18-82 years. All teeth underwent a full pulpotomy using mineral trioxide aggregate as a capping material and were recalled for clinical and radiographic evaluation at 3, 6, 12, and 24 months postoperatively. The overall success rate after the 12-month review was above 90%, and failed cases mainly occurred during the first 12 months after treatment. In this study, the treatment outcome of pulpotomy was not related to sex, or tooth position and the cause of pulpitis. To analyze the influence of age on the treatment outcome, all the teeth were allocated to three groups: group 1 (18-39 years); group 2 (40-59 years); and group 3 (≥ 60 years). A significant difference in success rate was found between groups 1 and 3 (P = 0.014). These results suggest that pulpotomy can be used as an alternative treatment for permanent mature teeth diagnosed with pulpitis and that aging is one factor affecting the treatment outcome.

Effect of Biodentine on Odonto/Osteogenic Differentiation of Human Dental Pulp Stem Cells.

This study aims to compare the biological characteristics of human dental pulp stem cells (hDPSCs) isolated from different-aged populations and examine the effects of Biodentine on proliferation and odonto/osteogenic differentiation of hDPSCs isolated from the elderly in vitro. hDPSCs were isolated from three different-aged populations: group A (≤18 years old), group B (19−59 years old), and group C (≥60 years old). The adhesion, proliferation, odonto/osteogenesis, and senescence were compared. The optimal concentration of aqueous Biodentine extract was determined by CCK-8 assay, alkaline phosphatase (ALP), and alizarin red staining (ARS). The effect of Biodentine on odonto/osteogenic gene and protein expression of hDPSCs in each group was evaluated by quantitative real-time PCR (QRT-PCR) and Western blot. hDPSCs were successfully isolated from three different-aged populations. Flow cytometry revealed that all isolated hDPSCs were positive for CD73 (>90%), CD90 (>90%), CD146 (<30%), and negative for CD45 (<1%). There existed an age-related decline in proliferation, odonto/osteogenic gene expression, and S-phase fraction (p < 0.05), an increase in senescence genes and p21 and p16 expression, and time needed for cell adhesion. Biodentine promoted hDPSC proliferation and mineralization in each group, particularly at a concentration of 0.2 mg/mL. Biodentine markedly enhanced odonto/osteogenesis-related gene and protein expression in each group (p < 0.05). hDPSCs can be obtained from populations of all ages. Though there is an age-related decline in their biological properties, hDPSCs from the elderly still maintain certain proliferation and multidirectional differentiation abilities. Biodentine can significantly promote the proliferation and odonto/osteogenic differentiation of hDPSCs isolated from the elderly over 60 years old, which could be considered a pulp capping material for vital pulp therapy in the elderly. Nevertheless, the efficacy of Biodentine in clinical application has to be further studied.

Strengthening flash light effect with a pond-tubular hybrid photobioreactor to improve microalgal biomass yield.

Poor light utilization efficiency and large occupied area of traditional raceway pond photobioreactors result in low areal microalgal biomass yield in industrial applications. In this study, a pond-tubular hybrid photobioreactor (PTH-PBR) comprising raceway ponds and horizontal tubes was developed to strengthen flash light effect and improve areal microalgal biomass yield. The highest flash cycle frequency (0.63 Hz) of microalgae cells along flow pathway was obtained in the raceway pond of PTH-PBR when shaded area percentage was 20% and ratio of adjacent tube interval to tube diameter was 1, which enhanced microalgal biomass yield by 31.2% than traditional raceway pond. Meanwhile, intracellular chlorophyll content increased by 33.6% and PSII maximum quantum yield (Fv/Fm) increased by 8.1% due to decreased photoinhibition stress. The areal microalgal biomass yield of PTH-PBR was 54.7% higher than that of traditional raceway pond without horizontal tubes.

Enhancing microalgal biomass productivity with an optimized flow field generated by double paddlewheels in a flat plate photoreactor with CO2 aeration based on numerical simulation.

Computational fluid dynamics were used to analyze the flash light effect and CO2 bubble behavior in an optimized flow field generated by double paddlewheels in a flat plate photoreactor to enhance microalgal biomass productivity. The increased D/w ratio significantly enhanced the average turbulent kinetic energy and flash cycle frequency. However, the effects became weak when the D/w ratio was over 0.67. Appliance of double paddlewheels increased flash cycle frequency from 0.035 to 0.121 Hz and increased light time ratio from 8.3% to 31.5%. Meanwhile, the bubble dynamic behavior was characterized using population balance model. The average bubble size reduced by 24.4% and the bubble rising velocity reduced by 10.6%, which facilitated CO2 mixing and mass transfer in microalgal solution. Therefore, biomass accumulation of microalgae Chlorella in the photoreactor with double paddlewheels increased by 62.3% under 15% CO2.

A novel jet-aerated tangential swirling-flow plate photobioreactor generates microbubbles that enhance mass transfer and improve microalgal growth.

To reduce bubble diameter and enhance mass transfer, a novel jet-aerated tangential swirling-flow plate photobioreactor was developed that improves the growth rate of microalgae. In this system, the circulating microalgal solution enters a jet aerator that takes up 15% CO2 by vacuum suction and then injects into a plate photobioreactor through four centrally symmetric nozzles. Each jetflow is tangent to a tangential circle, driving vertical vortex movement of the surrounding microalgal solution, which markedly reduced the bubble diameter and enhanced mass transfer. The mass transfer coefficient was enhanced by decreasing the nozzle number (n) and increasing the ratio of tangential circle diameter to plate photobioreactor equivalent diameter (d/D). The average bubble diameter decreased by 80.2% to 0.37 mm and the mass transfer coefficient increased 4.6 times to 48.9 h-1 when n was 4 and d/D was 0.34. Finally, the optimized system increased the biomass dry weight of microalgae by 49.4%.

Strengthening mass transfer of carbon dioxide microbubbles dissolver in a horizontal tubular photo-bioreactor for improving microalgae growth.

A CO2 microbubbles dissolver (CMD) was developed to facilitate dissolving inorganic carbon and strengthening mass transfer in a horizontal tubular photo-bioreactor system (HTPBRS), which enhanced microalgae biomass productivity with flue gas containing 15% CO2. The influence of pump power on the bubble formation and mixing effect was found to be more obvious than that of gas flow rate. Ceramic shell aerator was more favorable for reducing bubble diameter and enhancing mass transfer than traditional rubber strip aerator. Bubble formation time decreased by 53.4% and mixing time decreased by 68.9% in response to the increased pump power. When the base area ratio of ceramic shell aerator to dissolver in the HTPBRS increased, bubble formation time decreased by 19.6% and mass transfer coefficient increased by 80.9%. The biomass yield of microalgae Chlorella PY-ZU1 with ceramic shell aerator was 30% higher than that with rubber strip aerator in the HTPBRS.

Spermidine enhanced resistance of Chlorella to high levels of CO2 and light intensity for improving photosynthetic growth rate.

In order to promote the photosynthetic growth rate of Chlorella in the presence of flue gas CO2 from coal-fired power plants, spermidine was first used to enhance cellular resistance to a high CO2 concentration (15%) and high light intensity (30 000 lux). It was found that low concentrations (100-300 µM) of spermidine significantly enhanced the photosynthetic growth rate of Chlorella. The accelerated cell division decreased the cell diameter from 3.64 µm to 2.71 µm and the fractal dimension from 1.60 to 1.49, and the activity of total superoxide dismutase (T-SOD) increased from 0.48 U mL-1 to 5.33 U mL-1. Expression levels of key enzymes of photosystems I and II, ATP synthase and transportase markedly increased, thereby enhancing the electron transport and energy supply that reduced oxidative damage. Finally, an enhanced cellular resistance to the high CO2 concentration and high light intensity increased the biomass yield from 0.11 g L-1 to 1.71 g L-1 (300 µM).

Numerical simulation on promoting light/dark cycle frequency to improve microalgae growth in photobioreactor with serial lantern-shaped draft tube.

Computational fluid dynamics were employed to simulate microalgal cells movement with enhanced flash-light effects in a gaslift loop-current column photobioreactor (GLCP) with serial lantern-shaped draft tube (LDT). Clockwise and anticlockwise vortexes were formed in outer down-flow region of GLCP with LDT. The radial velocity, axial velocity, and turbulent kinetic energy of microalgal solution appeared periodical change around the lanterns. The average radial velocity showed a sixfold improvement from 0.003 m/s to 0.021 m/s, and average turbulent kinetic energy was enhanced by 18.2% from 22.5 × 10-4 m2/s2 to 26.6 × 10-4 m2/s2, thus increasing light/dark cycle frequency by 54%. The light/dark cycle frequency increased first and then decreased with an increase of individual lantern height. The increased lantern number promoted the light/dark cycle frequency and light time ratio. Microalgal biomass yield in the GLCP with LDT was improved by 30%, and CO2 fixation peak rate was promoted by 35%.

Generating cycle flow between dark and light zones with double paddlewheels to improve microalgal growth in a flat plate photo-bioreactor.

Double paddlewheels were proposed to generate cycle flow for increasing horizontal fluid velocity between dark and light zones in a flat plate photo-bioreactor, which strengthened the mass transfer and the mixing effect to improve microalgal growth with 15% CO2. Numerical fluid dynamics were used to simulate the cycle flow field with double paddlewheels. The local flow field measured with particle image velocimetry fitted well with the numerical simulation results. The horizontal fluid velocity in the photo-bioreactor was markedly increased from 5.8 × 10-5 m/s to 0.45 m/s with the rotation of double paddlewheels, resulting in a decreased dark/light cycle period. Therefore, bubble formation time and diameter reduced by 24.4% and 27.4%, respectively. Meanwhile, solution mixing time reduced by 31.3% and mass transfer coefficient increased by 41.2%. The biomass yield of microalgae Nannochloropsis Oceanic increased by 127.1% with double paddlewheels under 15% CO2 condition.

Serial lantern-shaped draft tube enhanced flashing light effect for improving CO2 fixation with microalgae in a gas-lift circumflux column photobioreactor.

A novel serial lantern-shaped draft tube (LDT) that generates vortices is proposed to increase radial velocity between dark and light regions for improving CO2 fixation with microalgae in a gas-lift circumflux column (GCC) photobioreactor. Clockwise vortices are generated in the downflow outerloop of the GCC photobioreactor with LDT. Radial velocity was improved from 1.50 to 4.35 × 10-2 m/s, thereby decreased liquid cycle period between dark and light regions by 1.9 times. Mixing time decreased by 21%, and mass transfer coefficient increased by 26% with LDT. Liquid radial velocity in the downflow outerloop and mass transfer coefficient in the GCC photobioreactor both first increased and then decreased when single-lantern height was increased. Peak CO2 fixation rate increased from 0.62 to 0.87 g/L/d, microalgal biomass yield increased by 50%. Removal efficiencies of pollutants (chemical oxygen demand, ammonium, tilmicosin, and ethinylestradiol) in wastewater were 62-90% with microalgae growth in GCC photobioreactor with LDT.