RESUMEN
A large quantity of orange peel waste (OPW) is generated per year, yet effective biorefinery methods are lacking. In this study, Trichosporonoides oedocephalis ATCC 16958 was employed for hydrolyzing OPW to produce soluble sugars. Glycosyl hydrolases from Paenibacillussp.LLZ1 which can hydrolyze cellulose and hemicellulose were mined and characterized, with the highest ß-mannanase activity of 39.1 U/mg at pH 6.0 and 50 â. The enzyme was overexpressed in T. oedocephalis and the sugar production was enhanced by 16 %. The accumulated sugar contains 57 % value-added mannooligosaccharides by the hydrolysis of mannans. The process was intensified by a pretreatment combining H2O2 submergence and steam explosion to remove potential inhibitors. The mannooligosaccharides yield of 6.5 g/L was achieved in flask conversion and increased to 9.7 g/L in a 5-L fermenter. This study improved the effectiveness of orange peel waste processing, and provided a hydrolysis-based methodology for the utilization of fruit wastes.
Asunto(s)
Basidiomycota , Citrus sinensis , beta-Manosidasa , beta-Manosidasa/química , Peróxido de Hidrógeno , Carbohidratos , Azúcares , HidrólisisRESUMEN
PURPOSE: Erythritol is a valuable compound as sweetener and chemical material however cannot be fermented from the abundant substrate xylose. METHODS: The strain Trichosporonoides oedocephalis ATCC 16958 was employed to produce polyols including xylitol and erythritol by metabolic engineering approaches. RESULTS: The introduction of a substrate-specific ribose-5-phosphate isomerase endowed T. oedocephalis with xylose-assimilation activity to produce xylitol, and eliminated glycerol production simultaneously. A more value-added product, erythritol was produced by further introducing a homologous xylulose kinase. The carbon flux was redirected from xylitol to erythritol by adding high osmotic pressure. The production of erythritol was improved to 46.5 g/L in flasks by fermentation adjustment, and the process was scaled up in a 5-L fermentor, with a 40 g/L erythritol production after 120 h, and a time-space yield of 0.56 g/L/h. CONCLUSION: This study demonstrated the potential of T. oedocephalis in the synthesis of multiple useful products from xylose.
Asunto(s)
Eritritol , Xilitol , Xilosa/metabolismo , Fermentación , Redes y Vías MetabólicasRESUMEN
Plant-derived insecticide-neonicotinoid insecticides (NIs) played a crucial role in the development of agriculture and food industry in recent years. Nevertheless, synthesis of these nitrogen-containing heterocyclic compounds with an effective and greener routing remains challenging especially to the notion raise of "green chemistry" and "atom economy". While bio-catalyzed methods mediated by nicotinate dehydrogenase (NDHase) then provide an alternative. The current review mainly focuses on the introduction of sources, components, structure, catalytic mechanism and applications of NDHase. Specifically, NDHase is known as nicotinic acid hydroxylase and the sources principally derived from phylum Proteobacteria. In addition, NDHase requires the participation of the electron respiratory chain system on the cell membrane. And the most important components of the electron respiratory chain are hydrogen carrier, which is mainly composed of iron-sulfur proteins (Fe-S), flavin dehydrogenase (FAD), molybdenum binding protein and cytochromes. Heterologous expression studies were hampered by the plasmid and host with high efficiency and currently only Pseudomonas entomophila L48 as well as Comamonas testosterone was successfully utilized for the expression of NDHase. Furthermore, it is speculated that the conjugate and inductive effects of the substituent group at position 3 of the substrate pyridine ring exerts a critical role in the hydroxylation reactions at position 6 concerning about the substrate molecular recognition mechanism. Finally, applications of NDHase are addressed in terms of pesticide industry and wastewater treatment. On conclusion, this critical review would not only deepen our understanding of the theory about NDHase, but also provides the guideline for future investigation of NDHase.
Asunto(s)
Oxidorreductasas actuantes sobre Donantes de Grupo CH-NH , Oxidorreductasas actuantes sobre Donantes de Grupo CH-NH/química , Oxidorreductasas actuantes sobre Donantes de Grupo CH-NH/genética , Oxidorreductasas actuantes sobre Donantes de Grupo CH-NH/metabolismo , PlásmidosRESUMEN
The production of 5-hydroxymethylfurfural (5-HMF) from cellulose catalyzed by a series of transition metal chlorides (i.e. FeCl3, RuCl3, VCl3, TiCl3, MoCl3 and CrCl3) was studied in biphasic system. RuCl3 was the most efficient catalyst among these transition metal chlorides for 5-HMF production, and resulted in both the highest yield of 83.3% and selectivity of 87.5% in NaCl-aqueous/butanol biphasic system. XRD analysis and FTIR spectroscopy were applied to further characterize the RuCl3 catalyzed cellulose slurries to reveal the catalytic reaction mechanism. Results demonstrated that RuCl3 enhanced the decrystallization and cleavage of COC bonds in cellulose, promoted the subsequent dehydration of glucose into 5-HMF, while suppressed the glucose retro-aldol reaction to byproduct lactic acid. In addition, with the assistance of NaCl-aqueous/butanol biphasic system, 5-HMF further degradation was limited and thusly maintained a desired 5-HMF yield. This proposed approach provides an efficient strategy for one-pot conversion of cellulose into 5-HMF.
Asunto(s)
Celulosa/química , Furaldehído/análogos & derivados , Compuestos de Rutenio/química , Catálisis , Furaldehído/química , Glucosa/químicaRESUMEN
Ionic liquids (ILs) have been applied as an environmentally friendly solvent in the pretreatment of lignocellulosic biomass for more than a decade. The ILs involved pretreatment processes for cellulases mediated saccharification lead to both the breakdown of cellulose crystallinity and the decrease of lignin content, thereby improving the solubility of cellulose and the accessibility of cellulase. However, most cellulases are partially or completely inactivated in the presence of even low amount of ILs. Immobilized cellulases are found to perform improved stability and higher apparent activity in practical application compared with its free counterparts. Enzyme immobilization therefore has become a promising way to relieve the deactivation of cellulase in ILs. Various immobilization carriers and methods have been developed and achieved satisfactory results in improving the stability, activity, and recycling of cellulases in IL pretreatment systems. This review aims to provide detailed introduction of immobilization methods and carrier materials of cellulase, including natural polysaccharides, synthetic polymers, inorganic materials, magnetic materials, and newly developed composite materials, and illustrate key methodologies in improving the performance of cellulase in the presence of ILs. Especially, novel materials and concepts from the recently representative researches are focused and discussed comprehensively, and future trends in immobilization of cellulases in non-natural ILs environments are speculated in the end.
Asunto(s)
Celulasa/metabolismo , Enzimas Inmovilizadas/metabolismo , Líquidos Iónicos/química , Biomasa , Celulosa/metabolismo , Hidrólisis , Lignina/metabolismo , Polisacáridos/química , SolventesRESUMEN
In this study, we attempted to find new and efficient microbial enzymes for producing rare sugars. A ribose-5-phosphate isomerase B (OsRpiB) was cloned, overexpressed, and preliminarily purified successfully from a newly screened Ochrobactrum sp. CSL1, which could catalyze the isomerization reaction of rare sugars. A study of its substrate specificity showed that the cloned isomerase (OsRpiB) could effectively catalyze the conversion of L-rhamnose to L-rhamnulose, which was unconventional for RpiB. The optimal reaction conditions (50°C, pH 8.0, and 1 mM Ca2+) were obtained to maximize the potential of OsRpiB in preparing L-rhamnulose. The catalytic properties of OsRpiB, including Km, kcat, and catalytic efficiency (kcat/Km), were determined as 43.47 mM, 129.4 sec-1, and 2.98 mM/sec. The highest conversion rate of L-rhamnose under the optimized conditions by OsRpiB could reach 26% after 4.5 h. To the best of our knowledge, this is the first successful attempt of the novel biotransformation of L-rhamnose to L-rhamnulose by OsRpiB biocatalysis.
Asunto(s)
Isomerasas Aldosa-Cetosa/química , Isomerasas Aldosa-Cetosa/metabolismo , Ochrobactrum/enzimología , Ramnosa/metabolismo , Isomerasas Aldosa-Cetosa/genética , Secuencia de Aminoácidos , Dominio Catalítico , Clonación Molecular , ADN Bacteriano/genética , Escherichia coli/metabolismo , Regulación Bacteriana de la Expresión Génica , Regulación Enzimológica de la Expresión Génica , Cinética , Ochrobactrum/aislamiento & purificación , Conformación Proteica , Proteínas Recombinantes , Ramnosa/química , Alineación de Secuencia , Análisis de Secuencia de Proteína , Especificidad por SustratoRESUMEN
Erythritol, a well-known natural sweetener, is mainly produced by microbial fermentation. Various metal ions (Al3+, Cu2+, Mn2+, and Ni2+) were added to the culture medium of Trichosporonoides oedocephalis ATCC 16958 at 30 mg/L in shake flask cultures. Compared with controls, Cu2+ increased the erythritol content by 86% and decreased the glycerol by-product by 31%. After 48 hr of shake flask culture, sodium dodecyl sulfate polyacrylamide gel electrophoresis showed that expression levels of erythrose reductase (ER) in the presence of 30 mg/L CuSO4 · 5H2O were higher than those obtained after treatment with other examined metal ions. Furthermore, after 108 hr of batch culture in a 5-L bioreactor, supplementation with 30 mg/L of CuSO4 · 5H2O increased the specific erythritol content by 27%. Further studies demonstrated that ER activity under 30 mg/L CuSO4 · 5H2O supplementation in a fermentor was overtly increased compared with the control after 60 hr, while glycerol-3-phosphate dehydrogenase activity was clearly reduced in most of the fermentation process. Furthermore, the NADPH/NADP ratio was slightly lower in T. oedocephalis cells treated with Cu2+ compared with control cells. These results provide further insights into Cu2+ effects on erythritol biosynthesis in T. oedocephalis and should improve the industrial production of erythritol by biological processes.
Asunto(s)
Basidiomycota/enzimología , Técnicas de Cultivo Celular por Lotes/métodos , Eritritol/metabolismo , Microbiología Industrial/métodos , NADP/metabolismo , Edulcorantes/metabolismo , Aldehído Reductasa/metabolismo , Basidiomycota/metabolismo , Reactores Biológicos/microbiología , Cationes/metabolismo , Fermentación , Glicerol/metabolismo , Glicerolfosfato Deshidrogenasa/metabolismo , Metales/metabolismoRESUMEN
A cellulase producing strain was newly isolated from soil samples and identified as Paenibacillus sp. LLZ1. A novel aqueous-dimethyl sulfoxide (DMSO)/1-ethyl-3-methylimidazolium diethyl phosphate ([Emin]DEP)-cellulase system was designed and optimized. In the pretreatment, DMSO was found to be a low-cost substitute of up to 70% ionic liquid to enhance the cellulose dissolution. In the enzymatic saccharification, the optimum pH and temperature of the Paenibacillus sp. LLZ1 cellulase were identified as 6.0 and 40°C, respectively. Under the optimized reaction condition, the conversion of microcrystalline cellulose and bagasse cellulose increased by 39.3% and 37.6%, compared with unpretreated cellulose. Compared to current methods of saccharification, this new approach has several advantages including lower operating temperature, milder pH, and less usage of ionic liquid, indicating a marked progress in environmental friendly hydrolysis of biomass-based materials.
Asunto(s)
Celulasa/química , Celulosa/química , Dimetilsulfóxido/química , Paenibacillus/enzimología , Hidrólisis , Imidazoles/química , Líquidos Iónicos/química , Organofosfatos/química , Paenibacillus/aislamiento & purificación , TemperaturaRESUMEN
BACKGROUND: Flowthrough pretreatment of biomass is a critical step in lignin valorization via conversion of lignin derivatives to high-value products, a function vital to the economic efficiency of biorefinery plants. Comprehensive understanding of lignin behaviors and solubilization chemistry in aqueous pretreatment such as water-only and dilute acid flowthrough pretreatment is of fundamental importance to achieve the goal of providing flexible platform for lignin utilization. RESULTS: In this study, the effects of flowthrough pretreatment conditions on lignin separation from poplar wood were reported as well as the characteristics of three sub-sets of lignin produced from the pretreatment, including residual lignin in pretreated solid residues (ReL), recovered insoluble lignin in pretreated liquid (RISL), and recovered soluble lignin in pretreatment liquid (RSL). Both the water-only and 0.05 % (w/w) sulfuric acid pretreatments were performed at temperatures from 160 to 270 °C on poplar wood in a flowthrough reactor system for 2-10 min. Results showed that water-only flowthrough pretreatment primarily removed syringyl (S units). Increased temperature and/or the addition of sulfuric acid enhanced the removal of guaiacyl (G units) compared to water-only pretreatments at lower temperatures, resulting in nearly complete removal of lignin from the biomass. Results also suggested that more RISL was recovered than ReL and RSL in both dilute acid and water-only flowthrough pretreatments at elevated temperatures. NMR spectra of the RISL revealed significant ß-O-4 cleavage, α-ß deoxygenation to form cinnamyl-like end groups, and slight ß-5 repolymerization in both water-only and dilute acid flowthrough pretreatments. CONCLUSIONS: Elevated temperature and/or dilute acid greatly enhanced lignin removal to almost 100 % by improving G unit removal besides S unit removal in flowthrough system. Only mild lignin structural modification was caused by flowthrough pretreatment. A lignin transformation pathway was proposed to explain the complexity of the lignin structural changes during hot water and dilute acid flowthrough pretreatment.Graphical abstractLignin transformations in water-only and dilute acid flowthrough pretreatment at elevated temperatures.
RESUMEN
BACKGROUND: Pretreatment is a vital but expensive step in biomass biofuel production. Overall, most of this past effort has been directed at maximizing sugar yields from hemicellulose and cellulose through trials with different chemicals, operating conditions, and equipment configurations. Flowthrough pretreatment provides a promising platform to dissolution of lignocellulosic biomass to generate high yields of fermentable sugars and lignin for biofuels productions. RESULTS: Dissolution of xylan, lignin, and cellulose from poplar wood were significantly enhanced by water-only and dilute acid (0.05% w/w, H2SO4) flowthrough pretreatment when the temperature was raised from 200°C to 280°C over a range of flow rates 10-62.5 mL/min, resulting in more than 98% solid removal. Up to 40% of original xylan was converted to xylose in the hydrolyzate and the rest xylan was solubilized into xylooligomers with negligible furfural formation. Up to 100% cellulose was removed into hydrolyzate with the highest glucose yield of 60% and low 5-hydroxymethylfurfural (5-HMF) formation. The maximal recovered insoluble lignin and soluble lignin were 98% and 15% of original lignin, respectively. In addition, enzymatic hydrolysis of pretreated whole slurries was characterized under various enzyme loadings with or without Bovine serum albumin (BSA) treatment. More than 90% glucose yield and 95% xylose yield were obtained from enzymatic hydrolysis of dilute acid pretreated whole slurries with 10 mg protein Ctec 2 with 2 mg Htec2/g glucan + xylan. CONCLUSIONS: Nearly complete dissolution of whole biomass was realized through water-only and dilute acid flowthrough pretreatment under tested conditions. Temperature was considered as the most significant factor for cellulose degradation. The cellulose removal significantly increased as temperature reached 240°C for water-only and 220°C for dilute acid. Dilute acid pretreatment resulted in higher yields of recovered xylan and cellulose as monomeric sugars in the hydrolyzate than that for water-only pretreatment. Enzymes readily hydrolyzed the degraded cellulose and xylooligomers in pretreatment hydrolysate. Results suggested that kinetics controlled the flowthrough pretreatment of biomass dissolution, which was also affected by flow rate to certain extent.
RESUMEN
Ethanol can be produced from lignocellulosic biomass with the usage of ball milling pretreatment followed by enzymatic hydrolysis and fermentation. The sugar yields from lignocellulosic feed stocks are critical parameters for ethanol production process. The research results from this paper indicated that the yields of glucose and xylose were improved by adding any of the following dilute chemical reagents: H(2)SO(4), HCl, HNO(3), CH(3)COOH, HCOOH, H(3)PO(4), and NaOH, KOH, Ca(OH)(2), NH(3)·H(2)O in the ball milling pretreatment of corn stover. The optimal enzymatic hydrolysis efficiencies were obtained under the conditions of ball milling in the alkali medium that was due to delignification. The data also demonstrated that ball milling pretreatment was a robust process. From the microscope image of ball milling-pretreated corn stover, it could be observed that the particle size of material was decreased and the fiber structure was more loosely organized. Meanwhile, the results indicate that the treatment effect of wet milling is better than that of dry milling. The optimum parameters for the milling process were ball speed of 350 r/min, solid/liquid ratio of 1:10, raw material particle size with 0.5 mm, and number of balls of 20 (steel ball, Φ = 10 mm), grinding for 30 min. In comparison with water milling process, alkaline milling treatment could increase the enzymatic hydrolysis efficiency of corn stover by 110%; and through the digestion process with the combination of xylanase and cellulase mixture, the hydrolysis efficiency could increase by 160%.
Asunto(s)
Biotecnología/métodos , Celulasas/química , Zea mays/química , Glucosa/análisis , Hidrólisis , Tamaño de la Partícula , Xilosa/análisisRESUMEN
A cycle spray flow-through reactor was designed and used to pretreat corn stover in dilute sulfuric acid medium. The dilute sulfuric acid cycle spray flow-through (DCF) process enhanced xylose sugar yields and cellulose digestibility while increasing the removal of lignin. Within the DCF system, the xylose sugar yields of 90-93% could be achieved for corn stover pretreated with 2% (w/v) dilute sulfuric acid at 95 degrees C during the optimal reaction time (90 min). The remaining solid residue exhibited enzymatic digestibility of 90-95% with cellulase loading of 60 FPU/g glucan that was due to the effective lignin removal (70-75%) in this process. Compared with flow-through and compress-hot water pretreatment process, the DCF method produces a higher sugar concentration and higher xylose monomer yield. The novel DCF process provides a feasible approach for lignocellulosic material pretreatment.