Synergistic Regulation of Anode and Cathode Interphases via an Alum Electrolyte Additive for High-performance Aqueous Zinc-Vanadium Batteries.

A zinc (Zn) metal anode paired with a vanadium oxide (VOx) cathode is a promising system for aqueous Zn-ion batteries (AZIBs); however, side reactions proliferating on the Zn anode surface and the infinite dissolution of the VOx cathode destabilise the battery system. Here, we introduce a multi-functional additive into the ZnSO4 (ZS) electrolyte, KAl(SO4)2 (KASO), to synchronise the in-situ construction of the protective layer on the surface of the Zn anode and the VOx cathode. Theoretical calculations and synchrotron radiation have verified that the high-valence Al3+ plays multifunctional roles of competing with Zn2+ for solvation and forming a Zn-Al alloy layer with a homogeneous electric field to mitigate the side reactions and dendrite generation. The Al-containing cathode-electrolyte interface considerably alleviates the irreversible dissolution of the VOx cathode and the accumulation of byproducts. Consequently, the Zn || Zn cell with KASO exhibits an ultra-long cycle of 6000 h at 2 mA cm-2. Importantly, the VOx cathodes (VO2, V2O5 and NH4V4O10) in the ZS-KASO electrolyte showed excellent cycling stability, even at a low negative/positive (N/P) ratio of 2.83 and high mass loading (~16 mg cm-2). This study offers a practical reference for concurrently addressing challenges at the anode and cathode of AZIBs.

Microbial carbon metabolism patterns of microplastic biofilm in the vertical profile of urban rivers.

Microplastics (MPs) can provide a unique niche for microbiota in waters, thus regulating the nutrients and carbon cycling. Following the vertical transport of MPs in waters, the compositions of attached biofilm may be dramatically changed. However, few studies have focused on the related ecological function response, including the carbon metabolism. In this study, we investigated the microbial carbon metabolism patterns of attached biofilm on different MPs in the vertical profile of urban rivers. The results showed that the carbon metabolism capacity of biofilm on the degradable polylactic acid (PLA) MPs was higher than that in the non-degradable polyethylene terephthalate (PET) MPs. In the vertical profile, the carbon metabolism rates of biofilm on two MPs both decreased with water depth, being 0.74 and 0.91 folds in bottom waters of that in surface waters. Specifically, the utilization of polymers, carbohydrate, and amine of PLA biofilm was significantly inhibited in the bottom waters, which were not altered on the PET. Compared with surface waters, the microbial metabolism function index of PLA biofilm was inhibited in deep waters, but elevated in the PET biofilm. In addition, the water quality parameters (e.g., nutrients) in the vertical profile largely shaped carbon metabolism patterns. These findings highlight the distinct carbon metabolism patterns in aquatic environments in the vertical profile, providing new insights into the effects of MPs on global carbon cycle.

Toxicokinetics of microplastics in Macrobrachium nipponense and their impact on the bioavailability of loaded pollutants.

Microplastics (MPs) have unique toxicokinetic (TK) processes that differ from those of soluble pollutants. This study investigated the ingestion, migration, accumulation, and clearance of environmental aging MPs in the Japanese swamp shrimp (Macrobrachium nipponense). The concentrations of plastic additives and personal care products adsorbed onto MPs in natural river water were determined, and TK models for MPs and MPs-loaded pollutants were developed. Results showed that the formation of surface biofilms and alterations in the distribution of MPs in waters caused by environmental aging affect MPs bioavailability, which is mainly related to the feeding habits of shrimp. The decrease in MPs particle size caused by biological digestion and the increase in the number of oxygen-containing functional groups caused by environmental aging affect the TK process of MPs. The TK model of MPs-loaded pollutants revealed the cleaning effect of shrimp on pollutants adsorbed onto MPs during swallowing and spitting MPs. This cleaning effect significantly increases the bioavailability of MPs-associated pollutants in aquatic environments. This study provides a new perspective for understanding the interactions between environmental MPs and their associated pollutants in aquatic ecosystems.

Advances in Noble Metal Electrocatalysts for Acidic Oxygen Evolution Reaction: Construction of Under-Coordinated Active Sites.

Renewable energy-driven proton exchange membrane water electrolyzer (PEMWE) attracts widespread attention as a zero-emission and sustainable technology. Oxygen evolution reaction (OER) catalysts with sluggish OER kinetics and rapid deactivation are major obstacles to the widespread commercialization of PEMWE. To date, although various advanced electrocatalysts have been reported to enhance acidic OER performance, Ru/Ir-based nanomaterials remain the most promising catalysts for PEMWE applications. Therefore, there is an urgent need to develop efficient, stable, and cost-effective Ru/Ir catalysts. Since the structure-performance relationship is one of the most important tools for studying the reaction mechanism and constructing the optimal catalytic system. In this review, the recent research progress from the construction of unsaturated sites to gain a deeper understanding of the reaction and deactivation mechanism of catalysts is summarized. First, a general understanding of OER reaction mechanism, catalyst dissolution mechanism, and active site structure is provided. Then, advances in the design and synthesis of advanced acidic OER catalysts are reviewed in terms of the classification of unsaturated active site design, i.e., alloy, core-shell, single-atom, and framework structures. Finally, challenges and perspectives are presented for the future development of OER catalysts and renewable energy technologies for hydrogen production.

HMGA1 promotes the progression of esophageal squamous cell carcinoma by elevating TKT-mediated upregulation of pentose phosphate pathway.

Esophageal squamous cell carcinoma (ESCC) possesses a poor prognosis and treatment outcome. Dysregulated metabolism contributes to unrestricted growth of multiple cancers. However, abnormal metabolism, such as highly activated pentose phosphate pathway (PPP) in the progression of ESCC remains largely unknown. Herein, we report that high-mobility group AT-hook 1 (HMGA1), a structural transcriptional factor involved in chromatin remodeling, promoted the development of ESCC by upregulating the PPP. We found that HMGA1 was highly expressed in ESCC. Elevated HMGA1 promoted the malignant phenotype of ESCC cells. Conditional knockout of HMGA1 markedly reduced 4-nitroquinoline-1-oxide (4NQO)-induced esophageal tumorigenesis in mice. Through the metabolomic analysis and the validation assay, we found that HMGA1 upregulated the non-oxidative PPP. With the transcriptome sequencing, we identified that HMGA1 upregulated the expression of transketolase (TKT), which catalyzes the reversible reaction in non-oxidative PPP to exchange metabolites with glycolytic pathway. HMGA1 knockdown suppressed the PPP by downregulating TKT, resulting in the reduction of nucleotides in ESCC cells. Overexpression of HMGA1 upregulated PPP and promoted the survival of ESCC cells by activating TKT. We further characterized that HMGA1 promoted the transcription of TKT by interacting with and enhancing the binding of transcription factor SP1 to the promoter of TKT. Therapeutics targeting TKT with an inhibitor, oxythiamine, reduced HMGA1-induced ESCC cell proliferation and tumor growth. Together, in this study, we identified a new role of HMGA1 in ESCCs by upregulating TKT-mediated activation of PPP. Our results provided a new insight into the role of HMGA1/TKT/PPP in ESCC tumorigenesis and targeted therapy.

The Dependence of Solid Electrolyte Interphase on the Crystal Facet of Current Collector in Li Metal Battery.

The continuous electrolyte decomposition and uncontrolled dendrite growth caused by the unstable solid electrolyte interphase (SEI) have largely hindered the development of Li metal batteries. Here, we demonstrate that tuning the facet of current collector can regulate the composition of SEI and the subsequent Li deposition behavior using single-crystal Cu foils as an ideal platform. The theoretical and experimental studies reveal that the (100) facet of Cu possesses strong adsorption to anions, guiding more anions to participate preferentially in the inner Helmholtz plane and further promoting the formation of the stable inorganic-rich SEI. Consequently, the single-crystal Cu foils with a single [100] orientation (s-Cu(100)) achieve the dendrite-free Li deposition with enhanced Li plating/stripping reversibility. Moreover, the Li anode deposited on s-Cu(100) can stabilize the operation of an Ah-level pouch cell (350 Wh kg-1) with a low negative/positive capacity ratio (~2) and lean electrolyte (2.4 g Ah-1) for 150 cycles. Impressively, this strategy demonstrates universality in a series of electrolytes employed different anions. This work provides new insights into the correlation between the SEI and current collector, opening a universal avenue towards high-performance Li metal batteries.

High-capacity dilithium hydroquinone cathode material for lithium-ion batteries.

Lithiated organic cathode materials show great promise for practical applications in lithium-ion batteries owing to their Li-reservoir characteristics. However, the reported lithiated organic cathode materials still suffer from strict synthesis conditions and low capacity. Here we report a thermal intermolecular rearrangement method without organic solvents to prepare dilithium hydroquinone (Li2Q), which delivers a high capacity of 323 mAh g-1 with an average discharge voltage of 2.8 V. The reversible conversion between orthorhombic Li2Q and monoclinic benzoquinone during charge/discharge processes is revealed by in situ X-ray diffraction. Theoretical calculations show that the unique Li-O channels in Li2Q are beneficial for Li+ ion diffusion. In situ ultraviolet-visible spectra demonstrate that the dissolution issue of Li2Q electrodes during charge/discharge processes can be handled by separator modification, resulting in enhanced cycling stability. This work sheds light on the synthesis and battery application of high-capacity lithiated organic cathode materials.

PVDF-HFP@Nafion-based quasisolid polymer electrolyte for high migration number in working rechargeable Na-O2 batteries.

Rechargeable sodium-oxygen (Na-O2) battery is deemed as a promising high-energy storage device due to the abundant sodium resources and high theoretical energy density (1,108 Wh kg-1). A series of quasisolid electrolytes are constantly being designed to restrain the dendrites growth, the volatile and leaking risks of liquid electrolytes due to the open system of Na-O2 batteries. However, the ticklish problem about low operating current density for quasisolid electrolytes still hasn't been conquered. Herein, we report a rechargeable Na-O2 battery with polyvinylidene fluoride-hexafluoropropylene recombination Nafion (PVDF-HFP@Nafion) based quasisolid polymer electrolyte (QPE) and MXene-based Na anode with gradient sodiophilic structure (M-GSS/Na). QPE displays good flame resistance, locking liquid and hydrophobic properties. The introduction of Nafion can lead to a high Na+ migration number (tNa+ = 0.68) by blocking the motion of anion and promote the formation of NaF-rich solid electrolyte interphase, resulting in excellent cycling stability at relatively high current density under quasisolid environment. In the meantime, the M-GSS/Na anode exhibits excellent dendrite inhibition ability and cycling stability. Therefore, with the synergistic effect of QPE and M-GSS/Na, constructed Na-O2 batteries run more stably and exhibit a low potential gap (0.166 V) after an initial 80 cycles at 1,000 mA g-1 and 1,000 mAh g-1. This work provides the reference basis for building quasisolid state Na-O2 batteries with long-term cycling stability.

Energy big data abnormal cluster detection method based on redundant convolution codec.

Due to the scattered distribution and poor clustering of abnormal clusters in energy big data, the ability to detect anomalies is poor. Therefore, a high-energy data anomaly clustering detection method based on redundant convolutional encoding is proposed. Quantitative analysis of the coupling characteristics of electrical thermal gas optical time series for multi energy users based on Copula function, and incorporating quantitative values into multi energy feature indicators to extract the energy consumption behavior characteristics of multi energy users. Utilize redundant convolutional codecs to recombine and structurally encode abnormal features of energy big data, and capture multi energy coupling time features using coupling time capsule layers. Then, coupling time features are synthesized through fully connected linear regression layers to generate anomalous clustering feature components, and the energy time series data is then transformed into feature values of the time series in three-dimensional space. Based on this, a comprehensive energy system and massive multi energy user energy big data anomaly clustering analysis are carried out to determine the optimal number of multi energy users. Then, based on linear layers, the electricity heat gas light load characteristic map of multi energy users is transformed into one-dimensional form, and an energy big data anomaly clustering detection model is constructed to complete anomaly detection. The simulation results show that the proposed method has excellent feature clustering performance, detection accuracy above 98.7%, fast convergence speed, and an error rate below 0.1, which has reliable application value.

Cotransport of nanoplastics and plastic additive bisphenol AF (BPAF) in unsaturated hyporheic zone: Coupling effects of surface functionalization and protein corona.

The ecological risk of combined pollution from microplastics (MPs) and associated contaminants usually depends on their interactions and environmental behavior, which was also disturbed by varying surface modifications of MPs. In this study, the significance of surface functionalization and protein-corona on the cotransport of nanoplastics (NPs; 100 nm) and the related additive bisphenol AF (BPAF) was examined in simulated unsaturated hyporheic zone (quartz sand; 250-425 µm). The electronegative bovine serum albumin (BSA) and electropositive trypsin were chosen as representative proteins, while pristine (PNPs), amino-modified (ANPs), and carboxyl-modified NPs (CNPs) were representative NPs with different charges. The presence of BPAF inhibited the mobility of PNPs/CNPs, but enhanced the release of ANPs in hyporheic zone, which was mainly related to their hydrophobicity changes and electrostatic interactions. Meanwhile, the NPs with high mobility and strong affinity to BPAF became effective carriers, promoting the cotransport of BPAF by 16.4 %-26.4 %. The formation of protein-coronas altered the mobility of NPs alone and their cotransport with BPAF, exhibiting a coupling effect with functional groups. BSA-corona promoted the transport of PNPs/CNPs, but this promoting effect was weakened by the presence of BPAF via increasing particle aggregation and hydrophobicity. Inversely, trypsin-corona aggravated the deposition of PNPs/CNPs, but competition deposition sites and increased energy barrier caused by coexisting BPAF reversed this effect, facilitating the cotransport of trypsin-PNPs/CNPs in hyporheic zone. However, BPAF and protein-coronas synergistically promoted the mobility of ANPs, owing to competition deposition sites and decreased electrostatic attraction. Although all of the NPs with two protein-coronas reduced dissolved BPAF in the effluents via providing deposition sites, the cotransport of total BPAF was improved by the NPs with high mobility (BSA-PNPs/CNPs) or high affinity to BPAF (BSA/trypsin-ANPs). However, the trypsin-PNPs/CNPs inhibited the transport of BPAF due to their weak mobility and adsorption with BPAF. The results provide new insights into the role of varying surface modifications on NPs in the vertical cotransport of NPs and associated contaminants in unsaturated hyporheic zone.

Polystyrene microplastics alter the trophic transfer and biotoxicity of fluoxetine in an aquatic food chain.

Microplastics (MPs) and fluoxetine are ubiquitous emerging pollutants in aquatic environments that may interact with each other due to the carrier effects of MPs, posing unpredictable risks to non-target organisms. However, limited studies have focused on the carrier effects of MPs in the aquatic food chain. This study evaluated the influences of polystyrene MPs on the trophic transfer and biotoxicity of fluoxetine in a simple food chain composed of brine shrimp (Artemia nauplii) and zebrafish (Danio rerio). The finding reveals that carrier effects of MPs enhanced the accumulation of waterborne fluoxetine in brine shrimp, but suppressed that in zebrafish due to the distinct retention times. The accumulated fluoxetine in shrimp was further transferred to fish through the food chain, which was alleviated by MPs due to their cleaning effects. In addition, the specific neurotransmission biotoxicity in fish induced by fluoxetine was mitigated by MPs, whilst the oxidative damage, apoptosis, and immune responses in zebrafish were reversely enhanced by MPs due to the stimulating effect. These findings highlight the alleviating effects of MPs on the trophic transfer and specific biotoxicity of fluoxetine in the food chain, providing new insights into the carrier effects of MPs in aquatic environments in the context of increasing global MP pollution.

Effect of microplastics on oxytetracycline trophic transfer: Immune, gut microbiota and antibiotic resistance gene responses.

Microplastics and antibiotics are prevalent and emerging pollutants in aquatic ecosystems, but their interactions in aquatic food chains remain largely unexplored. This study investigated the impact of polypropylene microplastics (PP-MPs) on oxytetracycline (OTC) trophic transfer from the shrimp (Neocaridina denticulate) to crucian carp (Carassius auratus) by metagenomic sequencing. The carrier effects of PP-MPs promoted OTC bioaccumulation and trophic transfer, which exacerbated enterocyte vacuolation and hepatocyte eosinophilic necrosis. PP-MPs enhanced the inhibitory effect of OTC on intestinal lysozyme activities and complement C3 levels in shrimp and fish, and hepatic immunoglobulin M levels in fish (p < 0.05). Co-exposure of MPs and OTC markedly increased the abundance of Actinobacteria in shrimp and Firmicutes in fish, which caused disturbances in carbohydrate, amino acid, and energy metabolism. Moreover, OTC exacerbated the enrichment of antibiotic resistance genes (ARGs) in aquatic animals, and PP-MPs significantly increased the diversity and abundance of ARGs and facilitated the trophic transfer of teta and tetm. Our findings disclosed the impacts of PP-MPs on the mechanism of antibiotic toxicity in aquatic food chains and emphasized the importance of gut microbiota for ARGs trophic transfer, which contributed to a deeper understanding of potential risks posed by complex pollutants on aquatic ecosystems.

Solid-State Electrolytes by Electrospinning Techniques for Lithium Batteries.

Solid-state lithium batteries (SSLBs) are regarded as next-generation energy storage devices because of their advantages in terms of safety and energy density. However, the poor interfacial compatibility and low ionic conductivity seriously hinder their development. Electrospinning is considered as a promising method for fabricating solid-state electrolytes (SSEs) with controllable nanofiber structures, scalability, and cost-effectiveness. Numerous efforts are dedicated to electrospinning SSEs with high ionic conductivity and strong interfacial compatibility, but a comprehensive summary is lacking. Here, the history of electrospinning SSEs is overeviewed and introduce the electrospinning mechanism, followed by the manipulation of electrospun nanofibers and their utilization in SSEs, as well as various methods to improve the ionic conductivity of SSEs. Finally, new perspectives aimed at enhancing the performance of SSEs membranes and facilitating their industrialization are proposed. This review aims to provide a comprehensive overview and future perspective on electrospinning technology in SSEs, with the goal of guiding the further development of SSLBs.

[Biological Effect of Microplastics with Different Functional Groups on the Bacterial Communities and Metabolic Functions of Zebrafish (Danio rerio) Embryos].

To investigate the influences of functional groups on the biological effects caused by microplastics, the accumulation of three polystyrene microplastics (PS, PS-NH2, and PS-COOH) in zebrafish (Danio rerio) embryos were analyzed, and then the responses of metabolic functions and microbial communities in zebrafish larvae were revealed using the combination of the microbiome and metabolome methods. The results showed that all microplastics could accumulate in zebrafish with concentrations ranging from 143 to 175 µg·g-1, and there were no significant differences in the accumulation potentials among different PS treatments. Exposure to plain PS significantly affected the metabolic capacity of aminoglycosides in zebrafish larvae, whereas the metabolic processes of amino acids were affected by PS-NH2. In the PS-COOH treatment, the metabolic pathways of the tricarboxylic acid cycle, amino acids, and glycolysis in zebrafish were markedly altered. The metabolic functions of zebrafish larvae were changed by all PS microplastics, resulting in toxic effects on zebrafish, and the functional group modification of microplastics may have further enhanced these toxicities. Compared to that in the control, exposure to PS-NH2 significantly reduced the diversity of microbial communities in zebrafish larvae and increased the proportion of Proteobacteria in the composition, leading to an imbalance of the bacterial community in zebrafish and thus disrupting the metabolic functions in the fish. Therefore, the functional modifications of microplastics may significantly alter the related stresses on aquatic organisms, leading to unpredictable ecological risks.

Spin-Magnetic Effect of d-π Conjugation Polymer Enhanced O-H Cleavage in Water Oxidation.

A deep understanding of the mechanism for the spin-magnetic effect on O-H cleavage is crucial for the development of new catalysts for water oxidation. Herein, we designed and synthesized the crystalline Fe-DABDT and Co-DABDT (DABDT = 2,5-diaminobenzene-1,4-dithiol) and optimized an effective magnetic moment to explore the role of the spin-magnetic effect in the regulation of water oxidation activity. It can be found that the OER activity of the catalyst is positively correlated with its effective magnetic moment. Under the external magnetic field, Fe-DABDT with more spin single electrons has a stronger spin-magnetic response to water oxidation than Fe/Co-DABDT and Co-DABDT. The increase in OER current of Fe-DABDT is nearly 2 times higher than that of Co-DABDT. Experimental and density functional theory studies show that magnetized Fe sites could realize nucleophilic reaction, accelerate the polarization of electron spin states, and promote the polar decomposition of O-H and the formation of the O-O bond. This study provides mechanistic insight into the spin-magnetic effect of oxygen evolution reaction and further understanding of the spin origin of catalytic activity, which is expected to improve the energy efficiency of hydrogen production.

Sustainable Aqueous Batteries Based on Bipolar Dissociation of Aluminum Hydroxyacetate Electrolyte.

Rechargeable aqueous batteries are potential systems for large-scale energy storage due to their high safety and low cost. However, developing aqueous batteries with high sustainability, affordability, and reversibility is urgent and challenging. Here we report an amphoteric aluminum hydroxyacetate (AlAc(OH)2) electrolyte with the ability of bipolar ionization of H+ and OH-, which facilitates the redox reactions at both the anthraquinone (AQ) anode and nickel hydroxide (Ni(OH)2) cathode. The bipolar ionization ability of the AlAc(OH)2(H2O)3 solvation structure results from the strong polarization ability of Al3+ and OH-. The H+/OH- dissociation ability with a dissociation constant of 5.0/3.0 is stronger than that of water (14.0), which boosts the simultaneous stable redox reactions of electrodes. Specifically, H+ uptake prevents the AQ anode from the formation of an ionic bond, suppressing the electrode dissolution, whereas OH- provides the local alkaline environment for the stable conversion reaction of the Ni(OH)2 cathode. The AQ anode in the designed AQ||Ni(OH)2 battery delivers a discharge capacity of 243.9 mAh g-1 and a capacity retention of 78.2% after 300 cycles with high reversibility. Moreover, a pouch cell with a discharge capacity of 0.90 Ah was assembled, exhibiting an energy density of 44.7 Wh kg-1 based on the total mass of the battery. This work significantly widens the types of aqueous batteries and represents a design philosophy of bipolar electrolytes and distinct electrochemical reactions with H+ and OH-.

Hierarchical Sea Urchin-like Fe-doped Heazlewoodite for High-Efficient Oxygen Evolution.

Electrochemical water-splitting to produce hydrogen is potential to substitute the traditional industrial coal gasification, but the oxygen evolution kinetics at the anode remains sluggish. In this paper, sea urchin-like Fe doped Ni3S2 catalyst growing on nickel foam (NF) substrate is constructed via a simple two-step strategy, including surface iron activation and post sulfuration process. The NF-Fe-Ni3S2 obtains at temperature of 130 °C (NF-Fe-Ni3S2-130) features nanoneedle-like arrays which are vertically grown on the particles to form sea urchin-like morphology, features high electrochemical surface area. As oxygen evolution catalyst, NF-Fe-Ni3S2-130 exhibits excellent oxygen evolution activities, fast reaction kinetics, and superior reaction stability. The excellent OER performance of sea urchin-like NF-Fe-Ni3S2-130 is mainly ascribed to the high-vertically dispersive of nanoneedles and the existing Fe dopants, which obviously improved the reaction kinetics and the intrinsic catalytic properties. The simple preparation strategy is conducive to establish high-electrochemical-interface catalysts, which shows great potential in renewable energy conversion.

Lattice Strained Induced Spin Regulation in Co-N/S Coordination-Framework Enhanced Oxygen Reduction Reaction.

Oxygen reduction reaction (ORR) is the bottleneck of metal-air batteries and fuel cells. Strain regulation can change the geometry and adjust the surface charge distribution of catalysts, which is a powerful strategy to optimize the ORR activity. The introduction of controlled strain to the material is still difficult to achieve. Herein, we present a temperature-pressure-induced strategy to achieve the controlled lattice strain for metal coordination polymers. Through the systematic study of the strain effect on ORR performance, the relationship between geometric and electronic effects is further understood and confirmed. The strained Co-DABDT (DABDT=2,5-diaminobenzene-1,4-dithiol) with 2 % lattice compression exhibits a superior half-wave potential of 0.81 V. Theoretical analysis reveals that the lattice strain changes spin-charge densities around S atoms for Co-DABDT, and then regulates the hydrogen bond interaction with intermediates to promote the ORR catalytic process. This work helps to understand the catalytic mechanism from the atomic level.

Active Diluent-Anion Synergy Strategy Regulating Nonflammable Electrolytes for High-Efficiency Li Metal Batteries.

High-energy Li metal batteries (LMBs) consisting of Li metal anodes and high-voltage cathodes are promising candidates of the next generation energy-storage systems owing to their ultrahigh energy density. However, it is still challenging to develop high-voltage nonflammable electrolytes with superior anode and cathode compatibility for LMBs. Here, we propose an active diluent-anion synergy strategy to achieve outstanding compatibility with Li metal anodes and high-voltage cathodes by using 1,2-difluorobenzene (DFB) with high activity for yielding LiF as an active diluent to regulate nonflammable dimethylacetamide (DMAC)-based localized high concentration electrolyte (LHCE-DFB). DFB and bis(fluorosulfonyl)imide (FSI- ) anion cooperate to construct robust LiF-rich solid electrolyte interphase (SEI) and cathode electrolyte interphase (CEI), which effectively stabilize DMAC from intrinsic reactions with Li metal anode and enhance the interfacial stability of the Li metal anodes and LiNi0.8 Co0.1 Mn0.1 O2 (NCM811) cathodes. LHCE-DFB enables ultrahigh Coulombic efficiency (98.7 %), dendrite-free, extremely stable and long-term cycling of Li metal anodes in Li || Cu cells and Li || Li cells. The fabricated NCM811 || Li cells with LHCE-DFB display remarkably enhanced long-term cycling stability and excellent rate capability. This work provides a promising active diluent-anion synergy strategy for designing high-voltage electrolytes for high-energy batteries.

Suppressing Bulk Strain and Surface O2 Release in Li-Rich Cathodes by Just Tuning the Li Content.

Layered oxides represent a prominent class of cathodes employed in lithium-ion batteries. The structural degradation of layered cathodes causes capacity decay during cycling, which is generally induced by anisotropic lattice strain in the bulk of cathode particle and oxygen release at the surface. However, particularly in lithium-rich layered oxides (LLOs) that undergo intense oxygen redox reactions, the challenge of simultaneously addressing bulk and surface issues through a singular modification technique remains arduous. Here a thin (1-nm) and coherent spinel-like phase is constructed on the surface of LLOs particle to suppress bulk strain and surface O2 release by just adjusting the amount of lithium source during synthesis. The spinel-like phase hinders the surface O2 release by accommodating O2 inside the surface layer, while the trapped O2 in the bulk impedes strain evolution by ≈70% at high voltages compared with unmodified LLOs. Consequently, the enhanced structural stability leads to an improved capacity retention of 97.6% and a high Coulombic efficiency of ≈99.5% after 100 cycles at 0.1°C. These findings provide profound mechanistic insights into the functioning of surface structure and offer guidance for synthesizing high-capacity cathodes with superior cyclability.