RESUMEN
Air pollution by particulate matter (PM) and airborne pathogens causes severe health problems in the human body. Presently, popular disposable air filters yield huge waste and have a fatal impact on the environment. Postuse cleaning of air filters also leads to secondary air and water pollution. Here, we report a sunlight-driven self-cleaning PM filter by coupling a full-solar-spectrum-active photocatalyst comprising up-conversion nanoparticles (UCNPs) decorated with semiconductor iron(III) oxide (UCNP@α-Fe2O3) shells stabilized upon graphene functionalized borosilicate fibrous membrane (rGO-BF). While rGO-BF ensures high PM adsorption, UCNP@α-Fe2O3 (NP) enables self-photodegradation of adsorbed PM under abundant sunlight and subsequent membrane regeneration, while preventing secondary air or water pollution. Rational surface chemistry and optimal microstructure enable our filters to remove >99% of PM2.5 under deplorable air-quality conditions. Moreover, our filter shows excellent antibacterial activity toward E. coli and S. aureus, demonstrating its potential for practical utilization in face masks, air filtering devices, and protective medical wear. This work successfully suggests an intriguing design platform for self-sustainable zero-waste air filter membranes.
Asunto(s)
Filtros de Aire , Material Particulado , Humanos , Material Particulado/química , Escherichia coli , Compuestos Férricos , Staphylococcus aureusRESUMEN
We present a thermally stable, mechanically compliant, and sensitive polymer-based NO2 gas sensor design. Interconnected nanoscale morphology driven from spinodal decomposition between conjugated polymers tethered with polar side chains and thermally stable matrix polymers offers judicious design of NO2-sensitive and thermally tolerant thin films. The resulting chemiresitive sensors exhibit stable NO2 sensing even at 170 °C over 6 h. Controlling the density of polar side chains along conjugated polymer backbone enables optimal design for coupling high NO2 sensitivity, selectivity, and thermal stability of polymer sensors. Lastly, thermally stable films are used to implement chemiresistive sensors onto flexible and heat-resistant substrates and demonstrate a reliable gas sensing response even after 500 bending cycles at 170 °C. Such unprecedented sensor performance as well as environmental stability are promising for real-time monitoring of gas emission from vehicles and industrial chemical processes.
Asunto(s)
Calor , Dióxido de Nitrógeno , PolímerosRESUMEN
Iono-electronics, that is, transducing devices able to translate ionic injection into electrical output, continue to demand a variety of mixed ionic-electronic conductors (MIECs). Though polar sidechains are widely used in designing novel polymer MIECs, it remains unclear to chemists how much balance is needed between the two antagonistic modes of transport (ion permeability and electronic charge transport) to yield high-performance materials. Here, the impact of molecularly hybridizing ion permeability and charge mobility in semiconducting polymers on their performance in electrochemical and synaptic transistors is investigated. A series of diketopyrrolopyrrole (DPP)-based copolymers are employed to demonstrate the multifunctionality attained by controlling the density of polar sidechains along the backbone. Notably, efficient electrochemical signal transduction and reliable synaptic plasticity are demonstrated via controlled ion insertion and retention. The newly designed DPP-based copolymers further demonstrate unprecedented thermal tolerance among organic mixed ionic-electronic conductors, a key property in the manufacturing of organic electronics.
RESUMEN
Nanoscale shape engineering is an essential requirement for the practical use of 2D materials, aiming at precisely customizing optimal structures and properties. In this work, sub-10-nm-scale block copolymer (BCP) self-assembled nanopatterns finely aligned along the atomic edge of 2D flakes, including graphene, MoS2 , and h-BN, are exploited for reliable nanopatterning of 2D materials. The underlying mechanism for the alignment of the self-assembled nanodomains is elucidated based on the wetting layer alternation of the BCP film in the presence of intermediate 2D flakes. The resultant highly aligned nanocylinder templates with remarkably low levels of line edge roughness (LER) and line-width roughness (LWR) yield a sub-10-nm-wide graphene nanoribbon (GNR) array with noticeable switching characteristics (on-to-off ratio up to ≈6 × 104 ).
RESUMEN
The recent emerging significance of the Internet of Things (IoT) demands sensor devices to be integrated with many different functional structures and devices while conserving their original functionalities. To this end, optical transparency and mechanical flexibility of sensor devices are critical requirements for optimal integration as well as high sensitivity. In this work, a transparent, flexible, and sensitive gas sensor building platform is introduced by using multilevel self-assembly of block copolymers (BCPs) and polystyrene (PS) colloids. For the demonstration of an H2 gas sensor, a hierarchically porous Pd metal mesh structure is obtained by overlaying the two different patterned template structures with synergistic, distinctive characteristic length scales. The hierarchical Pd mesh shows not only high transparency over 90% but also superior sensing performance in terms of response and recovery time owing to enhanced Pd-to-hydride ratio and short H2 diffusion lengths from the enlarged active surface areas. The hierarchical morphology also endows high mechanical flexibility while securing reliable sensing performance even under severe mechanical deformation cycles. Our scalable self-assembly based multiscale nanopatterning offers an intriguing generalized platform for many different multifunctional devices requiring hidden in situ monitoring of environmental signals.
RESUMEN
A novel strategy for robust and ultrathin (<1 µm) multilayered protective structures to address uncontrolled Lithium (Li) dendrite growth at Li-metal battery anodes is reported. Synergetic interaction among Ag nanoparticles (Ag NPs), reduced graphene oxide (rGO) films, and self-assembled block-copolymer (BCP) layers enables effective suppression of dendritic Li growth. While Ag NP layer confines the growth of Li metal underneath the rGO layer, BCP layer facilitates the fast and uniformly distributed flux of Li-ion transport and mechanically supports the rGO layer. Notably, highly aligned nanochannels with ≈15 nm diameter and ≈600 nm length scale interpenetrating within the BCP layer offer reversible well-defined pathways for Li-ion transport. Dramatic stress relaxation with the multilayered structure is confirmed via structural simulation considering the mechanical stress induced by filamentary-growth of Li metal. Li-metal anodes modified with the protective layer well-maintain stable reaction interfaces with limited solid-electrolyte interphase formation, yielding outstanding cycling stability and enhanced rate capability, as demonstrated by the full-cells paired with high-loading of LiFePO4 cathodes. The idealized design of multilayer protective layer provides significant insight for advanced Li-metal anodes.
RESUMEN
Many interesting properties of 2D materials and their assembled structures are strongly dependent on the lateral size and size distribution of 2D materials. Accordingly, effective size separation of polydisperse 2D sheets is critical for desirable applications. Here, we introduce flow field-flow fractionation (FlFFF) for a wide-range size fractionation of graphene oxide (GO) up to 100 µm. Two different separation mechanisms are identified for FlFFF, including normal mode and steric/hyperlayer mode, to size fractionate wide size-distributed GOs while employing a crossflow field for either diffusion or size-controlled migration of GO. Obviously, the 2D GO sheet reveals size separation behavior distinctive from typical spherical particles arising from its innate planar geometry. We also investigate 2D sheet size-dependent mechanical and electrical properties of three different graphene fibers produced from size-fractionated GOs. This FlFFF-based size selection methodology can be used as a generic approach for effective wide-range size separation for 2D materials, including rGO, TMDs, and MXene.
RESUMEN
Graphene fiber is emerging as a new class of carbon-based fiber with distinctive material properties particularly useful for electroconductive components for wearable devices. Presently, stretchable and bendable graphene fibers are principally employing soft dielectric additives, such as polymers, which can significantly deteriorate the genuine electrical properties of pristine graphene-based structures. We report molecular-level lubricating nanodiamonds as an effective physical property modifier to improve the mechanical flexibility of graphene fibers by relieving the tight interlayer stacking among graphene sheets. Nanoscale-sized NDs effectively increase the tensile strain and bending strain of graphene/nanodiamond composite fibers while maintaining the genuine electrical conductivity of pristine graphene-based fibers. The molecular-level lubricating mechanism is elucidated by friction force microscopy on the nanoscale as well as by shear stress measurement on the macroscopic scale. The resultant highly bendable graphene/nanodiamond composite fiber is successfully weaved into all graphene fiber-based textiles and wearable Joule heaters, proposing the potential for reliable wearable applications.
RESUMEN
Block copolymer (BCP) nanopatterning has emerged as a versatile nanoscale fabrication tool for semiconductor devices and other applications, because of its ability to organize well-defined, periodic nanostructures with a critical dimension of 5-100 nm. While the most promising application field of BCP nanopatterning has been semiconductor devices, the versatility of BCPs has also led to enormous interest from a broad spectrum of other application areas. In particular, the intrinsically low cost and straightforward processing of BCP nanopatterning have been widely recognized for their large-area parallel formation of dense nanoscale features, which clearly contrasts that of sophisticated processing steps of the typical photolithographic process, including EUV lithography. In this Review, we highlight the recent progress in the field of BCP nanopatterning for various nonsemiconductor applications. Notable examples relying on BCP nanopatterning, including nanocatalysts, sensors, optics, energy devices, membranes, surface modifications and other emerging applications, are summarized. We further discuss the current limitations of BCP nanopatterning and suggest future research directions to open up new potential application fields.
RESUMEN
The long-range alignment of supramolecular structures must be engineered as a first step toward advanced nanopatterning processes aimed at miniaturizing features to dimensions below 5 nm. This study introduces a facile method of directing the orientation of supramolecular columns over wafer-scale areas using faceted surfaces. Supramolecular columns with features on the sub-5 nm scale were highly aligned in a direction orthogonal to that of the facet patterning on unidirectional and nanoscopic faceted surface patterns. This unidirectional alignment of supramolecular columns is also observed by varying the thickness of the supramolecular film or by altering the dimensions of the facet pattern. The ordering behavior of the supramolecular columns can be attributed to the triangular depth profile of the bottom facet pattern. Furthermore, this directed self-assembly principle allows for the continuous alignment of supramolecular structures across ultralarge distances on flexible patterned substrates.
RESUMEN
An effective pathway to build macroscopic scale functional architectures bearing diverse structural dimensions is one of the critical challenges in the two-dimensional (2D) MXene research area. Unfortunately, assembling MXene without adhesive binder is largely limited due to its innate brittle nature and the relatively weak inter-flake van der Waals contact, in contrast to other mechanically compliant 2D materials such as graphene. Herein, an electrochemical self-assembly of pure Ti3C2Tx MXenes is presented for functional multidimensional MXene structures, effectively driven by layer-by-layer spontaneous interfacial reduction at metal template surfaces and subsequent defunctionalization. A three-dimensional open porous aerogel as well as 2D highly stacked thin film structures could be readily obtained in this approach, along with largely enhanced electrical properties induced by spontaneous removal of charge-trapping oxygen functional groups. Accordingly, supercapacitors and electromagnetic interference shielding films based on the multidimensional assembly demonstrate excellent performances.
RESUMEN
Nanoscale engineering of carbon materials is immensely demanded in various scientific areas. We present highly ordered nitrogen-doped carbon nanowire arrays via block copolymer (BCP) self-assembly under an electric field. Large dielectric constant difference between distinct polymer blocks offers rapid alignment of PMMA-b-PAN self-assembled nanodomains under an electric field. Lithographic patterning of the graphene electrode as well as straightforward thermal carbonization of the PAN block creates well-aligned carbon nanowire device structures. Diverse carbon nanopatterns including radial and curved arrays can be readily assembled by the modification of electrode shapes. Our carbon nanopatterns bear a nitrogen content over 26%, highly desirable for NO2 sensing, as the nitrogen element acts as adsorption sites for NO2 molecules. Aligned carbon nanowire arrays exhibits a 6-fold enhancement of NO2 sensitivity from a randomly aligned counterpart. Taking advantage of well-established benefits from device-oriented BCP nanopatterning, our approach proposes a viable route to highly ordered carbon nanostructures compatible to next-generation device architectures.
RESUMEN
Block copolymer (BCP) lithography is an effective nanopatterning methodology exploiting nanoscale self-assembled periodic patterns in BCP thin films. This approach has a critical limitation for nonplanar substrate geometry arising from the reflow and modification of BCP films upon the thermal or solvent annealing process, which is inevitable to induce the mobility of BCP chains for the self-assembly process. Herein, reflow-free, 3D BCP nanopatterning is demonstrated by introducing a conformally grown adlayer by the initiated chemical vapor deposition (iCVD) process. A highly cross-linked poly(divinylbenzene) layer was deposited directly onto the BCP thin film surface by iCVD, which effectively prevented the reflow of BCP thin film during an annealing process. BCP nanopatterns could be stabilized on various substrate geometry, including a nonplanar deformed polymer substrate, a pyramid shape substrate, and a graphene fiber surface. A fiber-type hydrogen evolution reaction (HER) catalyst is suggested by stabilizing lamellar Pt nanopatterns on severely rough graphene fiber surfaces.
RESUMEN
A nanosquare array is an indispensable element for the integrated circuit design of electronic devices. Block copolymer (BCP) lithography, a promising bottom-up approach for sub-10 nm patterning, has revealed a generic difficulty in the production of square symmetry because of the thermodynamically favored hexagonal packing of self-assembled sphere or cylinder arrays in thin-film geometry. Here, we demonstrate a simple route to square arrays via the orthogonal self-assembly of two lamellar layers on topographically patterned substrates. While bottom lamellar layers within a topographic trench are aligned parallel to the sidewalls, top layers above the trench are perpendicularly oriented to relieve the interfacial energy between grain boundaries. The size and period of the square symmetry are readily controllable with the molecular weight of BCPs. Moreover, such an orthogonal self-assembly can be applied to the formation of complex nanopatterns for advanced applications, including metal nanodot square arrays.
RESUMEN
Effective surface enhancement of Raman scattering (SERS) requires strong near-field enhancement as well as effective light collection of plasmonic structures. To this end, plasmonic nanoparticle (NP) arrays with narrow gaps or sharp tips have been suggested as desirable structures. We present a highly dense and uniform Au nanoscale gap array enabled by the customized design of NP shape and arrangement employing block copolymer self-assembly. Block copolymer self-assembly in thin films offers uniform hexagonally packed nanopost template arrays over the entire surface of a 2 in. wafer. Conventional evaporative metal deposition over the nanotemplate surface allows precise geometric control and positional arrangement of metal NPs, constituting tunable, strong plasmonic near-field enhancement particularly at the "hot spots" near interparticular nanoscale gaps. Underlying field distribution has been investigated by a finite-difference time-domain simulation. In the detection of thiophenol, our Au nanogap array shows a remarkable enhancement of Raman intensity greater than â¼104, a standard deviation as small as 12.3% compared to that of the planar Au thin film. In addition, adenine biomolecules can be detected with a detection limit as low as 100 nM. Our approach proposes highly sensitive and reliable SERS on the basis of a scalable, low-cost bottom-up strategy.
RESUMEN
Transparent conducting electrodes (TCEs) are essential components in various optoelectronic devices. Nanostructured metallic thin film is one of the promising candidates to complement current metal oxide films, such as ITO, where high cost rare earth elements have been a longstanding issue. Herein, we present that multiscale porous metal nanomesh thin films prepared by bimodal self-assembly of block copolymer (BCP)/homopolymer blends may offer a new opportunity for TCE. This hierarchical concurrent self-assembly consists of macrophase separation between BCP and homopolymer as well as microphase separation of BCP, and thus provides a straightforward spontaneous production of a highly porous multiscale pattern over an arbitrary large area. Employing a conventional pattern transfer process, we successfully demonstrated a multiscale highly porous metallic thin film with reasonable optical transparency, electro-conductance, and large-area uniformity, taking advantage of low loss light penetration through microscale pores and significant suppression of light reflection at the nanoporous structures. This well-defined controllable bimodal self-assembly can offer valuable opportunities for many different applications, including optoelectronics, energy harvesting, and membranes.