Determination of glucose oxidase activity by tyrosine fluorescence spectrophotometry.

A novel Fe2+/Tyr/H2O2 fluorescence reaction system has been established for the purpose of analyzing glucose oxidase activity. This system involves the catalysis of glucose oxidase on glucose to produce H2O2, which in turn oxidizes tyrosine to a highly fluorescent substance under the catalysis of Fe2+. The fluorescence intensity is subsequently employed to ascertain the enzymatic activity of glucose oxidase. The enzymatic oxidation reaction and tyrosine fluorescence reaction conditions were optimized based on the H2O2 standard curve equation. Direct fluorescence spectrophotometry was used to determine the activity range and detection limit of glucose oxidase, which were found to be 7.00 × 10-5-7.00 × 10-2 U/mL and 3.36 × 10-5 U/mL (Enzyme-like activity is 6.72 × 10-4 U/mL, The enzyme reaction time is 5 min), respectively, with a relative standard deviation of less than 3.2 %. This method has been successfully applied to determine the activity of glucose oxidase in food additives, with a recovery rate ranging from 96.00 % to 102.0 %.

Influence of Etchants on Etched Surfaces of High-Strength and High-Conductivity Cu Alloy of Different Processing States.

With the continuous integration of semiconductor devices, the requirements of the size accuracy and surface quality of etched lead frames are stricter. The etchant is a key factor in the etching process and etched surface quality, while the effects of the difference in etchants on the etched surface morphology of Cu alloy have not been directly studied. In this study, aqua regia, acidic FeCl3 and two CuCl2 solutions were used as etchants, and different CuCrSn specimens were etched and characterized. The results show that the etching rate in aqua regia is high, and the grain orientation, grain boundary (GB) and dislocations have significant influences on the local etching rate. The preferential etching of some atomic planes forms steps between the grains with different orientations, and preferential etching around the GB and dislocation group forms grooves, resulting in high surface roughness. For the surfaces etched by the FeCl3 and CuCl2 etchants, the steps and grooves are blurred; thus, they are less rough. The CuCrSn alloy surface etched by the aqua regia is clean, with little Cr-rich particles, while high-density Cr-rich particles remain on the surfaces etched by the FeCl3 and CuCl2 etchants. For the same kind of etchant, the ion concentration can affect the etching mechanism, rate and the etched surface morphology.

Effect of Extrusion on Mechanical Property, Corrosion Behavior, and In Vitro Biocompatibility of the As-Cast Mg-Zn-Y-Sr Alloy.

The effect of extrusion on the microstructure, mechanical property, corrosion behavior, and in vitro biocompatibility of as-cast Mg-1.5Zn-1.2Y-0.1Sr (wt.%) alloy was investigated via tensile tests, electrochemical methods, immersion tests, methylthiazolyl diphenyltetrazolium bromide (MTT), and analytical techniques. Results showed that the as-cast and as-extruded Mg-1.5Zn-1.2Y-0.1Sr alloys comprised an α-Mg matrix and Mg3Y2Zn3 phase (W-phase). In the as-cast alloy, the W-phase was mainly distributed at the grain boundaries, with a small amount of W-phase in the grains. After hot extrusion, the W-phase was broken down into small particles that were dispersed in the alloy, and the grains were refined considerably. The as-extruded alloy exhibited appropriate mechanical properties that were attributed to refinement strengthening, dispersion strengthening, dislocation strengthening, and precipitation strengthening. The as-cast and as-extruded alloys exhibited galvanic corrosion between the W-phase and α-Mg matrix as the main corrosion mechanism. The coarse W-phase directly caused the poor corrosion resistance of the as-cast alloy. The as-extruded alloy obtained via hydrogen evolution and mass loss had corrosion rates of less than 0.5 mm/year. MTT, high-content screening (HCS) analysis, and cell adhesion tests revealed that the as-extruded alloy can improve L929 cell viability and has great potential in the field of biomedical biodegradable implant materials.

Tissue-location-specific transcription programs drive tumor dependencies in colon cancer.

Cancers of the same tissue-type but in anatomically distinct locations exhibit different molecular dependencies for tumorigenesis. Proximal and distal colon cancers exemplify such characteristics, with BRAFV600E predominantly occurring in proximal colon cancers along with increased DNA methylation phenotype. Using mouse colon organoids, here we show that proximal and distal colon stem cells have distinct transcriptional programs that regulate stemness and differentiation. We identify that the homeobox transcription factor, CDX2, which is silenced by DNA methylation in proximal colon cancers, is a key mediator of the differential transcriptional programs. Cdx2-mediated proximal colon-specific transcriptional program concurrently is tumor suppressive, and Cdx2 loss sufficiently creates permissive state for BRAFV600E-driven transformation. Human proximal colon cancers with CDX2 downregulation showed similar transcriptional program as in mouse proximal organoids with Cdx2 loss. Developmental transcription factors, such as CDX2, are thus critical in maintaining tissue-location specific transcriptional programs that create tissue-type origin specific dependencies for tumor development.

Low platinum loading electrocatalyst supported on a carrier derived from carbon dots doped ZIF-67 for the ORR and zinc-air batteries.

The development of economical and efficient platinum-based catalysts for the oxygen reduction reaction (ORR) is considered the most promising strategy for the widespread application of clean energy conversion devices. Herein, Co nanoparticles encapsulated in N-doped carbon carriers, CoCN(CDs-X), were constructed by pyrolyzing carbon dots (CDs) doped ZIF-67 and further used to anchor Pt to prepare low Pt loading catalysts, PtCoCN(CDs-X). The introduction of CDs not only improves the conductivity for efficient electron transfer, but also regulates the interaction between Pt and the CoCN(CDs-X) support and alleviates the oxidation of Pt. The optimized PtCoCN(CDs-0.10) displays decent ORR behavior with onset and half-wave potentials of 0.95 V and 0.83 V, respectively, in alkaline media and superior catalytic stability and methanol tolerance. While employing PtCoCN(CDs-0.10) as a cathode catalyst for an as-assembled zinc-air battery (ZAB), it delivers an excellent power density of 194.2 mW cm-2 and exceptional operation stability, which is indicated by a voltage efficiency loss of only 7.7% after a long cycle life of 100 h, demonstrating its great potential applications.

Risk assessment of broflanilide for human and non-target terrestrial organisms in cauliflower production.

Broflanilide is a newly-developed meta-diamide insecticide, proposed for the control of a wide variety of chewing pests on many crops. In view of the proposed use of broflanilide and its environmental fate, it may be exposed to consumers and non-target organisms, which adversely affect human and the environment. In this paper, a rapid, sensitive and valid UPLC-MS/MS method was established for simultaneous analysis of broflanilide and its two major metabolites, DM-8007 and S (PFP-OH)-8007, in cauliflower. Then, the dissipation behaviors and final residues of broflanilide and its two major metabolites in cauliflower from eight sites with different climatic conditions in China were studied via the described analytical method. In addition, the acute toxicity test of 9.5 % suspension concentrate of broflanilide, broflanilide standard, DM-8007 and S (PFP-OH)-8007 were conducted to non-target terrestrial organisms. Risk assessment for human and non-target terrestrial organisms in cauliflower production was evaluated based on the maximum annual application rates and intervals. The results showed that the highest residue of broflanilide detected in cauliflower samples was all lower than the corresponding MRLs (2 mg/kg) in Japan. Chronic food dietary risk estimates for broflanilide do not exceed 50 % for all the Chinese population groups. Moreover, broflanilide is of low acute toxicity to birds and earthworm, while broflanilide and its metabolites is classified as highly toxic to adult honeybees. Acute risks of broflanilide to birds and earthworms were deemed to be acceptable in a realistic worst-case scenario, while its risk to adult honeybees and ladybug was unacceptable. A protection statement for honeybees and ladybug is required to recognize the high toxicity of broflanilide on related product labels. The study will be conducive to provide guidance for the rational application of broflanilide in cauliflower production.

The molecular mechanism underlying dermatomyositis related interstitial lung disease: evidence from bioinformatic analysis and in vivo validation.

Background: Dermatomyositis (DM) is an autoimmune and inflammatory disease that can affect the lungs, causing interstitial lung diseases (ILD). However, the exact pathophysiological mechanisms underlying DM-ILD are unknown. Idiopathic pulmonary fibrosis (IPF) belongs to the broader spectrum of ILD and evidence shows that common pathologic pathways might lie between IPF and DM-ILD. Methods: We retrieved gene expression profiles of DM and IPF from the Gene Expression Omnibus (GEO) and utilized weighted gene co-expression network analysis (WGCNA) to reveal their co-expression modules. We then performed a differentially expressed gene (DEG) analysis to identify common DEGs. Enrichment analyses were employed to uncover the hidden biological pathways. Additionally, we conducted protein-protein interaction (PPI) networks analysis, cluster analysis, and successfully found the hub genes, whose levels were further validated in DM-ILD patients. We also examined the relationship between hub genes and immune cell abundance in DM and IPF. Finally, we conducted a common transcription factors (TFs)-genes network by NetworkAnalyst. Results: WGCNA revealed 258 intersecting genes, while DEG analysis identified 66 shared genes in DM and IPF. All of these genes were closely related to extracellular matrix and structure, cell-substrate adhesion, and collagen metabolism. Four hub genes (POSTN, THBS2, COL6A1, and LOXL1) were derived through intersecting the top 30 genes of the WGCNA and DEG sets. They were validated as active transcripts and showed diagnostic values for DM and IPF. However, ssGSEA revealed distinct infiltration patterns in DM and IPF. These four genes all showed a positive correlation with immune cells abundance in DM, but not in IPF. Finally, we identified one possible key transcription factor, MYC, that interact with all four hub genes. Conclusion: Through bioinformatics analysis, we identified common hub genes and shared molecular pathways underlying DM and IPF, which provides valuable insights into the intricate mechanisms of these diseases and offers potential targets for diagnostic and therapeutic interventions.

Primary or metastatic branchial cleft carcinoma?: a case report.

The brachial cleft carcinoma is an extremely rare head and neck facial malignancy, and there is some disagreement about its differential diagnosis. In this paper, we report a 63-year-old male patient who had a mass on the left side of the neck and diagnosed as the brachial cleft carcinoma by intraoperative biopsy pathology. However, this patient was diagnosed with the carcinoma of the left soft palate more than 20 days after surgery and esophageal cancer 2 years later, and was treated accordingly. Therefore, it is hard to confirm whether the branchial cleft carcinoma is primary or metastatic. In fact, the diagnostic criteria for primary squamous cell carcinoma of branchial cleft cysts are very rigorous. Confirmation of the diagnosis is based on pathological examination of the branchial cleft cyst epithelium lined with squamous cells, meanwhile, a thorough examination should also be performed to exclude the presence of other primary cancers.

Postoperative elevated cardiac troponin levels predict all-cause mortality and major adverse cardiovascular events following noncardiac surgery: A dose-response meta-analysis of prospective studies.

STUDY OBJECTIVE: To perform a dose-response meta-analysis for the association between postoperative myocardial injury (PMI) in noncardiac surgery and the risk of all-cause mortality or major adverse cardiovascular event (MACE). DESIGN: Dose-response meta-analysis of prospective studies with weighted (WL) or generalized (GL) linear and restricted cubic spline (RCS) regression. SETTING: Teaching hospitals. PATIENTS: Adult patients undergoing noncardiac surgery. INTERVENTIONS: No. MEASUREMENTS: The primary outcome was all-cause mortality. The secondary outcome was MACE. MAIN RESULTS: 29 studies (53,518 patients) were included. The overall incidence of PMI was 26.0% (95% CI 21.0% to 32.0%). Compared to those without PMI, patients with PMI had an increased risk of all-cause mortality at short- (<12 months) (cardiac troponin[cTn]I: unadj OR 1.71,95%CI 1.22 to 2.41, P < 0.001; cTnT: unadj OR 2.33,95%CI 2.07 to 2.63, P < 0.001), and long-term (≥ 12 months) (cTnI: unadj OR 1.80, 95%CI 1.63 to 1.99; cTnT: unadj OR 1.47,95%CI 1.33 to 1.62) (All P < 0.001) follow-up. For MACE, the group with elevated values was associated with an increased risk (cTnI: unadj OR 1.98, 95% CI 1.13 to 3.47, P = 0.018; cTnT: unadj OR 2.29, 95% CI 1.88 to 2.79, P < 0.001). Dose-response analysis showed positive associations between PMI (per 1× upper reference limit[URL] increment) and all-cause mortality both at short- (unadj OR) (WL, OR 1.09, 95% CI 1.09 to 1.10; GL, OR 1.06, 95% CI 1.06 to 1.07; RCS in the range of 1-2× URL, OR = 2.43, 95%CI 2.25 to 2.62) and long-term follow-up (unadj HR) (WL, OR 1.16, 95% CI 1.14 to 1.17; GL, OR 1.15, 95% CI 1.13 to 1.16; RCS in the range of 1-2.75× URL, OR = 1.23, 95%CI 1.13 to 1.33), and MACE at longest follow-up (unadj OR) (WL: OR 1.53, 95% CI 1.49 to 1.57; GL: OR 1.46, 95% CI 1.42 to 1.50; RCS in the range of 1-2 x URL, OR = 3.10, 95%CI 2.51 to 3.81) (All P < 0.001). For mild cTn increase below URL, the risk of mortality increased with every increment of 0.25xURL (WL, OR 1.03, 95% CI 1.02 to 1.03; GL, OR 1.05, 95% CI 1.03 to 1.07; RCS in the range of 0-0.5 URL, OR = 9.41, 95% CI 7.41 to 11.95) (All P < 0.001). CONCLUSIONS: This study shows positive WL or GL and RCS dose-response relationships between PMI and all-cause mortality at short (< 12 mons)- and long-term (≥ 12 mons) follow-up, and MACE at longest follow-up. For mild cTn increase below URL, the risk of mortality also increases even with every increment of 0.25× URL.

Strengthening Mechanism of Rotary-Forged Deformable Biodegradable Zn-0.45Li Alloys.

The use of zinc (Zn) alloys as a biodegradable metal for medical purposes has been a popular research topic. This study investigated the strengthening mechanism of Zn alloys to enhance their mechanical properties. Three Zn-0.45Li (wt.%) alloys with different deformation amounts were prepared by rotary forging deformation. Their mechanical properties and microstructures were tested. A simultaneous increase in strength and ductility was observed in the Zn-0.45Li alloys. Grain refinement occurred when the rotary forging deformation reached 75.7%. The surface average grain size reached 1.19 ± 0.31 µm, and the grain size was uniformly distributed. Meanwhile, the maximum elongation of the deformed Zn-0.45Li was 139.2 ± 18.6%, and the ultimate tensile strength reached 426.1 ± 4.7 MPa. In situ tensile tests showed that the reinforced alloys still broke from the grain boundary. Continuous and discontinuous dynamic recrystallization during severe plastic deformation produced many recrystallized grains. During deformation, the dislocation density of the alloy first increased and then decreased, and the texture strength of the (0001) direction increased with deformation. Analysis of the mechanism of alloy strengthening showed that the strength and plasticity enhancement of Zn-Li alloys after macro deformation was a combination of dislocation strengthening, weave strengthening, and grain refinement rather than only fine-grain strengthening as observed in conventional macro-deformed Zn alloys.

Transcription factor Nkx2-3 maintains the self-renewal of hematopoietic stem cells by regulating mitophagy.

Hematopoietic stem cells (HSCs) reside at the top of the hematopoietic hierarchy, exhibiting a unique capacity to self-renew and differentiate into all blood cells throughout the lifetime. However, how to prevent HSC exhaustion during long-term hematopoietic output is not fully understood. Here, we show that the homeobox transcription factor Nkx2-3 is required for HSC self-renewal by preserving metabolic fitness. We found that Nkx2-3 is preferentially expressed in HSCs with excessive regenerative potential. Mice with conditional deletion of Nkx2-3 displayed a reduced HSC pool and long-term repopulating capacity as well as increased sensitivity to irradiation and 5-flurouracil treatment due to impaired HSC quiescence. In contrast, overexpression of Nkx2-3 improved HSC function both in vitro and in vivo. Furthermore, mechanistic studies revealed that Nkx2-3 can directly control the transcription of the critical mitophagy regulator ULK1, which is essential for sustaining metabolic homeostasis in HSCs by clearing activated mitochondria. More importantly, a similar regulatory role of NKX2-3 was observed in human cord blood-derived HSCs. In conclusion, our data demonstrate an important role of the Nkx2-3/ULK1/mitophagy axis in regulating the self-renewal of HSCs, therefore providing a promising strategy to improve the function of HSCs in the clinic.

Oxymatrine boosts hematopoietic regeneration by modulating MAPK/ERK phosphorylation after irradiation-induced hematopoietic injury.

Hematopoietic toxicity due to ionizing radiation (IR) is a leading cause of death in nuclear incidents, occupational hazards, and cancer therapy. Oxymatrine (OM), an extract originating from the root of Sophora flavescens (Kushen), possesses extensive pharmacological properties. In this study, we demonstrate that OM treatment accelerates hematological recovery and increases the survival rate of mice subjected to irradiation. This outcome is accompanied by an increase in functional hematopoietic stem cells (HSCs), resulting in enhanced hematopoietic reconstitution abilities. Mechanistically, we observed significant activation of the MAPK signaling pathway, accelerated cellular proliferation, and decreased cell apoptosis. Notably, we identified marked increases in the cell cycle transcriptional regulator Cyclin D1 (Ccnd1) and the anti-apoptotic protein BCL2 in HSCs after OM treatment. Further investigation revealed that the expression of Ccnd1 transcript and BCL2 levels were reversed upon specific inhibition of ERK1/2 phosphorylation, effectively negating the rescuing effect of OM. Moreover, we determined that targeted inhibition of ERK1/2 activation significantly counteracted the regenerative effect of OM on human HSCs. Taken together, our results suggest a crucial role for OM in hematopoietic reconstitution following IR via MAPK signaling pathway-mediated mechanisms, providing theoretical support for innovative therapeutic applications of OM in addressing IR-induced injuries in humans.

Effect of Mg Contents on the Microstructure, Mechanical Properties and Cytocompatibility of Degradable Zn-0.5Mn-xMg Alloy.

The effect of magnesium (Mg) content on the microstructure, mechanical properties, and cytocompatibility of degradable Zn-0.5Mn-xMg (x = 0.05 wt%, 0.2 wt%, 0.5 wt%) alloys was investigated. The microstructure, corrosion products, mechanical properties, and corrosion properties of the three alloys were then thoroughly characterized by scanning electron microscopy (SEM), electron back-scattered diffraction (EBSD), and other methods. According to the findings, the grain size of matrix was refined by the addition of Mg, while the size and quantity of Mg2Zn11 phase was increased. The Mg content could significantly improve the ultimate tensile strength (UTS) of the alloy. Compared with the Zn-0.5Mn alloy, the UTS of Zn-0.5Mn-xMg alloy was increased significantly. Zn-0.5Mn-0.5Mg exhibited the highest UTS (369.6 MPa). The strength of the alloy was influenced by the average grain size, the solid solubility of Mg, and the quantity of Mg2Zn11 phase. The increase in the quantity and size of Mg2Zn11 phase was the main reason for the transition from ductile fracture to cleavage fracture. Moreover, Zn-0.5Mn-0.2Mg alloy showed the best cytocompatibility to L-929 cells.

Tespa1 facilitates hematopoietic and leukemic stem cell maintenance by restricting c-Myc degradation.

Hematopoietic stem cells (HSCs) and leukemia stem cells (LSCs) have robust self-renewal potential, which is responsible for sustaining normal and malignant hematopoiesis, respectively. Although considerable efforts have been made to explore the regulation of HSC and LSC maintenance, the underlying molecular mechanism remains obscure. Here, we observe that the expression of thymocyte-expressed, positive selection-associated 1 (Tespa1) is markedly increased in HSCs after stresses exposure. Of note, deletion of Tespa1 results in short-term expansion but long-term exhaustion of HSCs in mice under stress conditions due to impaired quiescence. Mechanistically, Tespa1 can interact with CSN subunit 6 (CSN6), a subunit of COP9 signalosome, to prevent ubiquitination-mediated degradation of c-Myc protein in HSCs. As a consequence, forcing c-Myc expression improves the functional defect of Tespa1-null HSCs. On the other hand, Tespa1 is identified to be highly enriched in human acute myeloid leukemia (AML) cells and is essential for AML cell growth. Furthermore, using MLL-AF9-induced AML model, we find that Tespa1 deficiency suppresses leukemogenesis and LSC maintenance. In summary, our findings reveal the important role of Tespa1 in promoting HSC and LSC maintenance and therefore provide new insights on the feasibility of hematopoietic regeneration and AML treatment.

Melanocortin/MC5R axis regulates the proliferation of hematopoietic stem cells in mice after ionizing radiation injury.

Hematopoietic stem cells (HSCs) possess great self-renewal and multidirectional differentiation abilities, which contribute to the continuous generation of various blood cells. Although many intrinsic and extrinsic factors have been found to maintain HSC homeostasis, the precise regulation of hematopoiesis under stress conditions is poorly understood. In this study, we show that melanocortin receptor 5 (MC5R) is abundantly expressed in hematopoietic stem progenitor cells (HSPCs). Using an MC5R knockout mouse model, we observed that it is not essential for steady-state hematopoiesis. Interestingly, the levels of α-melanocyte stimulating hormone (α-MSH), an important subtype of melanocortin, were elevated in the serum and bone marrow, and the expression of MC5R was upregulated in HSPCs from mice after irradiation. MC5R deficiency aggravates irradiation-induced myelosuppression because of impaired proliferation and reconstitution of HSCs. Further investigation revealed that the melanocortin/MC5R axis regulates the proliferation of HSCs by activating the PI3K/AKT and MAPK pathways. More importantly, α-MSH treatment can significantly accelerate hematopoietic recovery in irradiated mice. In conclusion, our data demonstrate that the melanocortin/MC5R axis plays a crucial role in regulating HSC proliferation under stress, thus providing a promising strategy to promote hematopoietic regeneration when suffering from injury.

Influence of Enzymes on the In Vitro Degradation Behavior of Pure Zn in Simulated Gastric and Intestinal Fluids.

Zinc (Zn) alloys are being developed as the degradable biomaterial. However, the corrosion mechanism of Zn in the gastrointestinal environment is seldom investigated and needs to be addressed. In this study, the impacts of enzymes on the degradation of pure Zn via electrochemical measurements and immersion were investigated. Pepsin and pancreatin affected the degradation of pure Zn. In contrast with the solutions without enzymes, the degradation rates declined with the addition of enzymes in solutions. However, localized corrosion was observed because the adsorption of pepsin was not a perfect barrier to prevent corrosion. The adsorbed pancreatin protected the samples from corrosion mainly at the initial stage of immersion. With immersion in the simulated intestinal fluid, adsorption and desorption of pancreatin occurred simultaneously on the sample surface. These findings allow the development of Zn alloy-implanted devices for the digestive tract as well as the understanding of the Zn corrosion mechanism in the gastrointestinal environment.

A Review of Smart Superwetting Surfaces Based on Shape-Memory Micro/Nanostructures.

Bioinspired smart superwetting surfaces with special wettability have aroused great attention from fundamental research to technological applications including self-cleaning, oil-water separation, anti-icing/corrosion/fogging, drag reduction, cell engineering, liquid manipulation, and so on. However, most of the reported smart superwetting surfaces switch their wettability by reversibly changing surface chemistry rather than surface microstructure. Compared with surface chemistry, the regulation of surface microstructure is more difficult and can bring novel functions to the surfaces. As a kind of stimulus-responsive material, shape-memory polymer (SMP) has become an excellent candidate for preparing smart superwetting surfaces owing to its unique shape transformation property. This review systematically summarizes the recent progress of smart superwetting SMP surfaces including fabrication methods, smart superwetting phenomena, and related application fields. The smart superwettabilities, such as superhydrophobicity/superomniphobicity with tunable adhesion, reversible switching between superhydrophobicity and superhydrophilicity, switchable isotropic/anisotropic wetting, slippery surface with tunable wettability, and underwater superaerophobicity/superoleophobicity with tunable adhesion, can be obtained on SMP micro/nanostructures by regulating the surface morphology. Finally, the challenges and future prospects of smart superwetting SMP surfaces are discussed.

Well-dispersed Ni3Fe nanoparticles with a N-doped porous carbon shell for highly efficient rechargeable Zn-air batteries.

NiFe-based nanoparticles attached to heteroatom-doped carbon are found to act as tremendously efficient oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) electrocatalysts. Nevertheless, it is extremely challenging to control the particle size and avoid aggregation. Herein, nitrogen-doped carbon encapsulated Ni3Fe nanoparticles (Ni3Fe@NC) are prepared by two-stage pyrolysis with a low rate based on the in situ structural evolution of FeNi-PBAs. The strategy results in uniform Ni3Fe nanoparticles anchoring within the carbon shell and thus facilitating interfacial interaction. Benefiting from the enhanced synergism between Ni3Fe particles and NC layers, Ni3Fe@NC-600 demonstrates the best catalytic activity and durability, not only with almost the same onset potential (1.01 V) as commercial Pt/C for the ORR but also satisfactory OER performance with a low overpotential of 0.29 V at 10 mA cm-2 in 0.1 M KOH. Moreover, the Zn-air battery assembled using the Ni3Fe@NC-600 cathode exhibits superior performance to commercial Pt/C + RuO2. The simple and scalable method of this work provides insight into the fabrication of high-performance and cost-effective bifunctional oxygen electrocatalysts.

Non-Invasive Blood Pressure Tracking of Spontaneous Hypertension Rats Using an Electronic Nose.

Traditional noninvasive blood pressure measurement methods in experimental animals are time consuming and difficult to operate, particularly for large numbers of animals. In this study, the possibility of sensing fecal odor to estimate the blood pressure status of spontaneous hypertension rats (SHRs) was explored with the aim of establishing a new method for non-invasive monitoring of blood pressure. The body weight and blood pressure of SHRs kept increasing with growth, and the odor information monitored using an E-nose varied with the blood pressure status, particularly for sensors S6 and S7. The fecal information was analyzed using principal component analysis, canonical discriminant analysis and multilayer perception neural networks (MLP) to discriminate SHRs from normal ones, with a 100% correct classification rate. For better prediction of blood pressure, the model built using multiple linear regression analysis, partial least squares regression analysis and multilayer perceptron neural network analysis were used, with coefficients of determination (R2) ranging from 0.8036 to 0.9926. Moreover, the best prediction model for blood pressure was established using MLP analysis with an R2¬ higher than 0.91. Thus, changes in blood pressure levels can be tracked non-invasively, and normotension can be distinguished from hypertension or even at different hypertension levels based on the odor information of rat feces, providing a foundation for non-invasive health monitoring. This work might provide potential instructions for functional food research aimed at lowering blood pressure.

Terahertz vortex beam generator carrying orbital angular momentum in both transmission and reflection spaces.

Vortex beam generators carrying orbital angular momentum (OAM) with both transmission and reflection modes has broad application prospects in full-space high data capacity communication and orbital angular momentum multiplexing systems. In this work, we proposed a vanadium dioxide (VO2) assisted metasurface to independently produce and manipulate focused vortex transmission-reflection modes with different number of beams and focal lengths under right-handed circular polarized (RCP) wave incidence. The proposed metasurface generates the diagonal vortex beams, four vortex beams, and focused vortex beam for transmission mode at 1.26THz and reflection mode at 1.06THz by changing phase state of the VO2. Our work may find many potential applications in future high data capacity information multiplexing communication systems.