RESUMEN
Realizing the full potential of stretchable bioelectronics in wearables, biomedical implants and soft robotics necessitates conductive elastic composites that are intrinsically soft, highly conductive and strain resilient. However, existing composites usually compromise electrical durability and performance due to disrupted conductive paths under strain and rely heavily on a high content of conductive filler. Here we present an in situ phase-separation method that facilitates microscale silver nanowire assembly and creates self-organized percolation networks on pore surfaces. The resultant nanocomposites are highly conductive, strain insensitive and fatigue tolerant, while minimizing filler usage. Their resilience is rooted in multiscale porous polymer matrices that dissipate stress and rigid conductive fillers adapting to strain-induced geometry changes. Notably, the presence of porous microstructures reduces the percolation threshold (Vc = 0.00062) by 48-fold and suppresses electrical degradation even under strains exceeding 600%. Theoretical calculations yield results that are quantitatively consistent with experimental findings. By pairing these nanocomposites with near-field communication technologies, we have demonstrated stretchable wireless power and data transmission solutions that are ideal for both skin-interfaced and implanted bioelectronics. The systems enable battery-free wireless powering and sensing of a range of sweat biomarkers-with less than 10% performance variation even at 50% strain. Ultimately, our strategy offers expansive material options for diverse applications.
Asunto(s)
Conductividad Eléctrica , Nanocompuestos , Plata , Dispositivos Electrónicos Vestibles , Tecnología Inalámbrica , Nanocompuestos/química , Porosidad , Plata/química , Humanos , Nanocables/química , Técnicas Biosensibles/instrumentación , Técnicas Biosensibles/métodos , Polímeros/química , Sudor/químicaRESUMEN
Chronic wounds have emerged as a significant healthcare burden, affecting millions of patients worldwide and presenting a substantial challenge to healthcare systems. The diagnosis and management of chronic wounds are notably intricate, with inappropriate management contributing significantly to the amputation of limbs. In this work, we propose a compact, wireless, battery-free, and multimodal wound monitoring system to facilitate timely and effective wound treatment. The design of this monitoring system draws on the principles of higher-order parity-time symmetry, which incorporates spatially balanced gain, neutral, and loss, embodied by an active -RLC reader, an LC intermediator, and a passive RLC sensor, respectively. Our experimental results demonstrate that this wireless wound sensor can detect temperature (T), relative humidity (RH), pressure (P), and pH with exceptional sensitivity and robustness, which are critical biomarkers for assessing wound healing status. Our in vitro experiments further validate the reliable sensing performance of the wound sensor on human skin and fish. This multifunctional monitoring system may provide a promising solution for the development of futuristic wearable sensors and integrated biomedical microsystems.
RESUMEN
The aim of the work was to systematically evaluate the efficacy and safety of Vandetanib in the treatment of advanced medullary thyroid carcinoma (MTC). MeSH entries to search for randomized controlled trials and clinical research literature on the application of Vandetanib in the treatment of medullary thyroid cancer from PubMed, Chinese national knowledge infrastructure (CNKI), and Web of Science databases since their establishment until March 2023 were used. In terms of efficacy, the analysis results showed that Vandetanib had a significantly higher objective response rate compared to the control group using placebo (OR=2.13, 95% CI: 1.38, 3.29). In terms of side effects, Vandetanib significantly increases the incidence of hypertension, rash, and diarrhea, and has statistical significance (p+<+0.05). Vandetanib has a better therapeutic effect on MTC, but it also increases the incidence of hypertension, rash, and diarrhea. Attention should be paid to the relief of side effects when using it.
RESUMEN
Physically unclonable functions (PUFs) are a class of hardware-specific security primitives based on secret keys extracted from integrated circuits, which can protect important information against cyberattacks and reverse engineering. Here, we put forward an emerging type of PUF in the electromagnetic domain by virtue of the self-dual absorber-emitter singularity that uniquely exists in the non-Hermitian parity-time (PT)-symmetric structures. At this self-dual singular point, the reconfigurable emissive and absorptive properties with order-of-magnitude differences in scattered power can respond sensitively to admittance or phase perturbations caused by, for example, manufacturing imperfectness. Consequently, the entropy sourced from inevitable manufacturing variations can be amplified, yielding excellent PUF security metrics in terms of randomness and uniqueness. We show that this electromagnetic PUF can be robust against machine learning-assisted attacks based on the Fourier regression and generative adversarial network. Moreover, the proposed PUF concept is wavelength-scalable in radio frequency, terahertz, infrared, and optical systems, paving a promising avenue toward applications of cryptography and encryption.
RESUMEN
Radio frequency identification (RFID) has gained significant attention because it provides a highly versatile platform for identifying, tracking, and monitoring objects. An emerging trend in this technology is the use of nonlinear RFID, such as passive harmonic tags, which have been demonstrated to be effective against clutters, echoes, crosstalk, and other electromagnetic interferences. This article presents a comprehensive review of recent advances and applications of passive harmonic RFIDs and integrated systems. A passive harmonic RFID exploits the frequency orthogonality of the transmitted (fundamental tone) and received (harmonics) radio-frequency (RF) signals to enable robust interrogation in noisy and cluttered environments, not possible with traditional passive linear RFIDs. This review article evaluates passive harmonic RFID systems in comparison to traditional systems and highlights their pros and cons. Several state-of-the-art chipless and chip-based harmonic RFIDs are presented, and their novel applications in identification, tracking, sensing, and biotelemetry are discussed. The review summarizes the key successes and challenges of passive harmonic RFID systems and provides insights into their future development, implementation, and optimization.
RESUMEN
In recent decades, thriving Internet of Things (IoT) technology has had a profound impact on people's lifestyles through extensive information interaction between humans and intelligent devices. One promising application of IoT is the continuous, real-time monitoring and analysis of body or environmental information by devices worn on or implanted inside the body. This research area, commonly referred to as wearable electronics or wearables, represents a new and rapidly expanding interdisciplinary field. Wearable electronics are devices with specific electronic functions that must be flexible and stretchable. Various novel materials have been proposed in recent years to meet the technical challenges posed by this field, which exhibit significant potential for use in different wearable applications. This article reviews recent progress in the development of emerging nanomaterial-based wearable electronics, with a specific focus on their flexible substrates, conductors, and transducers. Additionally, we discuss the current state-of-the-art applications of nanomaterial-based wearable electronics and provide an outlook on future research directions in this field.
RESUMEN
The spectral sensitivity near exceptional points (EPs) has been recently explored as an avenue for building sensors with enhanced sensitivity. However, to date, it is not clear whether this class of sensors does indeed outperform traditional sensors in terms of signal-to-noise ratio. In this work, we investigate the spectral sensitivity associated with EPs under a different lens and propose to utilize it as a resource for hardware security. In particular, we introduce a physically unclonable function (PUF) based on analogue electronic circuits that benefit from the drastic eigenvalues bifurcation near a divergent exceptional point to enhance the stochastic entropy caused by inherent parameter fluctuations in electronic components. This in turn results in a perfect entropy source for the generation of encryption keys encoded in analog electrical signals. This lightweight and robust analog-PUF structure may lead to a variety of unforeseen securities and anti-counterfeiting applications in radio-frequency fingerprinting and wireless communications.
RESUMEN
The intersection of biomedicine and radio frequency (RF) engineering has fundamentally transformed self-health monitoring by leveraging soft and wearable electronic devices. This paradigm shift presents a critical challenge, requiring these devices and systems to possess exceptional flexibility, biocompatibility, and functionality. To meet these requirements, traditional electronic systems, such as sensors and antennas made from rigid and bulky materials, must be adapted through material science and schematic design. Notably, in recent years, extensive research efforts have focused on this field, and this review article will concentrate on recent advancements. We will explore the traditional/emerging materials for highly flexible and electrically efficient wearable electronics, followed by systematic designs for improved functionality and performance. Additionally, we will briefly overview several remarkable applications of wearable electronics in biomedical sensing. Finally, we provide an outlook on potential future directions in this developing area.
RESUMEN
Vital signal monitoring, such as pulse, respiration rate, intra-organ and intra-vascular pressure, can provide important information for determination of clinic diagnosis, treatments, and surgical protocols. Nowadays, micromachined bioimplants, equipped with antennas for converting bio-signals to modulated radio transmissions, may allow remote continuous monitoring of patients' vital signs. Yet, current passive biotelemetry techniques usually suffer from poor signal reproducibility and robustness in light of inevitable misalignment between transmitting and receiving antennas. Here, we seek to address this long-existing challenge and to robustly acquire information from a passive wireless intracranial pressure (or brain pressure) sensor by introducing a novel, high-performance biotelemetry system. In spite of variable inductive links, this biotelemetry system may have absolute accuracy by leveraging the uniqueness of loci of exceptional points (EPs) in non-Hermitian radio-frequency (RF) electronic systems with parity-time (PT) symmetry. Our in-vitro experimental demonstration shows that the proposed intracranial (ICP) monitoring system can provide a sub-mmHg resolution in the ICP range of 0-20 mmHg and ultra-robust wireless data acquisition against the misalignment-induced weakening of inductive link. Our results could provide a practical pathway toward reliable, real-time wireless monitoring of ICP, and other vital signals generated by bio-implants and wearables.
Asunto(s)
Presión Intracraneal , Prótesis e Implantes , Humanos , Monitoreo Fisiológico/métodos , Reproducibilidad de los Resultados , Signos Vitales , Tecnología InalámbricaRESUMEN
We herein introduce a lightweight and zero-power smart face mask, capable of wirelessly monitoring coughs in real time and identifying proper mask wearing in public places during a pandemic. The smart face mask relies on the compact, battery-free radio frequency (RF) harmonic transponder, which is attached to the inner layer of the mask for detecting its separation from the face. Specifically, the RF transponder composed of miniature antennas and passive frequency multiplier is made of spray-printed silver nanowires (AgNWs) coated with a poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) passivation layer and the recently discovered multiscale porous polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene (SEBS) substrate. Unlike conventional on-chip or on-board wireless sensors, the SEBS-AgNWs/PEDOT:PSS-based RF transponder is lightweight, stretchable, breathable, and comfortable. In addition, this wireless device has excellent resilience and robustness in long-term and repeated usages (i.e., repeated placement and removal of the soft transponder on the mask). We foresee that this wireless smart face mask, providing simultaneous cough and mask-wearing monitoring, may mitigate virus-transmissive events by tracking the potential contagious person and identifying mask-wearing conditions. Moreover, the ability to wirelessly assess cough frequencies may improve diagnosis accuracy for dealing with several diseases, such as chronic obstructive pulmonary disease.
Asunto(s)
Máscaras , Nanocables , Humanos , Tecnología Inalámbrica , Poliestirenos , Tos , PlataRESUMEN
In this paper, we introduce an ultra-sensitive optical sensing platform based on the parity-time-reciprocal scaling (PTX)-symmetric non-Hermitian metasurfaces, which leverage exotic singularities, such as the exceptional point (EP) and the coherent perfect absorber-laser (CPAL) point, to significantly enhance the sensitivity and detectability of photonic sensors. We theoretically studied scattering properties and physical limitations of the PTX-symmetric metasurface sensing systems with an asymmetric, unbalanced gain-loss profile. The PTX-symmetric metasurfaces can exhibit similar scattering properties as their PT-symmetric counterparts at singular points, while achieving a higher sensitivity and a larger modulation depth, possible with the reciprocal-scaling factor (i.e., X transformation). Specifically, with the optimal reciprocal-scaling factor or near-zero phase offset, the proposed PTX-symmetric metasurface sensors operating around the EP or CPAL point may achieve an over 100 dB modulation depth, thus paving a promising route toward the detection of small-scale perturbations caused by, for example, molecular, gaseous, and biochemical surface adsorbates.
RESUMEN
Methods for detecting mycotoxins are very important because of the great health hazards of mycotoxins. However, there is a high background and low signal-to-noise ratio in real-time sensing, and therefore it is difficult to meet the fast, accurate, and convenient requirements for control of food quality. Here we constructed a quantitative fluorescence image analysis based on multicolor upconversion nanocrystal (UCN)-encoded microspheres for detection of ochratoxin A and zearalenone. The background-free encoding image signal of UCN-doped microspheres was captured by fluorescence microscopy under near-infrared excitation, whereas the detection image signal of phycoerythrin-labeled secondary antibodies conjugated to the microspheres was captured under blue light excitation. We custom-wrote an algorithm to analyze the two images for the same sample in 10 s, and only the gray value in the red channel of the secondary probe confirmed the quantity. The results showed that this novel detection platform performed feasible and reliable fluorescence image measurements by this method. Additionally, the limit of detection of was 0.34721 ng/mL for ochratoxin A and 0.41162 ng/mL for zearalenone. We envision that this UCN encoding strategy will be usefully applied for fast, accurate, and convenient testing of multiple food contaminants to ensure the safety of the food.
Asunto(s)
Microesferas , Ocratoxinas/análisis , Zearalenona/análisis , Contaminación de Alimentos/análisis , Inmunoensayo/métodos , Límite de Detección , Nanopartículas/química , Relación Señal-RuidoRESUMEN
In vivo noninvasively manipulating biological functions by the mediation of biosafe near infrared (NIR) light is becoming increasingly popular. For these applications, upconversion rare-earth nanomaterial holds great promise as a novel photonic element, and has been widely adopted in optogenetics. In this article, an upconversion optogenetic nanosystem that was promised to achieve autophagy up-regulation with spatiotemporal precision was designed. The implantable, wireless, recyclable, less-invasive and biocompatible system worked via two separated parts: blue light-receptor optogenetics-autophagy upregulation plasmids, for protein import; upconversion rods-encapsulated flexible capsule (UCRs-capsule), for converting tissue-penetrative NIR light into local visible blue light. Results validated that this system could achieve up-regulation of autophagy in vitro (in both HeLa and 293T cell lines) and remotely penetrate tissue (â¼3.5â¯mm) in vivo. Since autophagy serves at a central position in intracellular signalling pathways, which is correlative with diverse pathologies, we expect that this method could establish an upconversion material-based autophagy up-regulation strategy for fundamental and clinical applications.
Asunto(s)
Autofagia/efectos de la radiación , Rayos Infrarrojos , Nanopartículas/química , Optogenética , Regulación hacia Arriba/efectos de la radiación , Animales , Humanos , Mapeo de Interacción de ProteínasRESUMEN
The detection of mycotoxins in food is urgently needed because they pose a significant threat to public health. In this study, we developed a quantitative detection platform for mycotoxins by integrating multicolor upconversion nanoparticle barcode technology with fluorescence image processing using a smartphone-based portable device. The multi-colored upconversion nanoparticle encoded microspheres (UCNMs) were used as encoded signals for detecting different mycotoxins simultaneously. After indirect competitive immunoassays using UCNMs, images could be captured by the portable device and the camera of a smartphone. Then, a self-written Android application, which is an HSV-based image recognition program installed on a smartphone, analyzed images and offered a reliable and accurate result in less than 1 min. The quantitative detection platform of mycotoxins proved to be feasible and reliable, and the limit of detection (LOD) was 1 ng, which was lower than that obtained from standard assays. This study demonstrates a method for detecting mycotoxins in food and other point of care analysis.