In situ Electrical Impedance Tomography for Visualizing Water Transportation in Hygroscopic Aerogels.

The global water crisis demands immediate attention, and atmospheric water harvesting (AWH) provides a viable alternative. However, studying the real-time subtle relationship between water absorption, diffusion, and internal structure for hygroscopic materials is challenging. Herein, a dynamic visualization technique is proposed that utilizes an in situ electrical impedance tomography (EIT) system and a precise reconstruction algorithm to achieve real-time monitoring of the water sorption process within aerogels from an internal microstructural perspective. These results can be inferred that composites' pore sizes affecting the kinetics of their moisture absorption. In addition, the diffusion path of moisture absorption and the distribution of stored moisture inside aerogels exhibit intrinsic self-selective behavior, where the fiber skeleton of the aerogel plays a crucial role. In summary, this work proposes a generic EIT-based technique for the in situ and dynamic monitoring of the hygroscopic process, pointing to an entirely new approach regarding research on AWH materials.

Multifunctional laser-induced graphene circuits and laser-printed nanomaterials toward non-invasive human kidney function monitoring.

Faced with the increasing prevalence of chronic kidney disease (CKD), portable monitoring of CKD-related biomarkers such as potassium ion (K+), creatinine (Cre), and lactic acid (Lac) levels in sweat has shown tremendous potential for early diagnosis. However, a rapidly manufacturable portable device integrating multiple CKD-related biomarker sensors for ease of sweat testing use has yet to be reported. Here, a portable electrochemical sensor integrated with multifunctional laser-induced graphene (LIG) circuits and laser-printed nanomaterials based working electrodes fabricated by fully automatic laser manufacturing is proposed for non-invasive human kidney function monitoring. The sensor comprises a two-electrode LIG circuit for K+ sensing, a three-electrode LIG circuit with a Kelvin compensating connection for Cre and Lac sensing, and a printed circuit board based portable electrochemical workstation. The working electrodes containing Cu and Cu2O nanoparticles fabricated by two-step laser printing show good sensitivity and selectivity toward Cre and Lac sensing. The sensor circuits are fabricated by generating a hydrophilic-hydrophobic interface on a patterned LIG through laser. This sensor recruited rapid laser manufacturing and integrated with multifunctional LIG circuits and laser-printed nanomaterials based working electrodes, which is a potential kidney function monitoring solution for healthy people and kidney disease patients.

Stretchable, Transparent, and Ultra-Broadband Terahertz Shielding Thin Films Based on Wrinkled MXene Architectures.

With the increasing demand for terahertz (THz) technology in security inspection, medical imaging, and flexible electronics, there is a significant need for stretchable and transparent THz electromagnetic interference (EMI) shielding materials. Existing EMI shielding materials, like opaque metals and carbon-based films, face challenges in achieving both high transparency and high shielding efficiency (SE). Here, a wrinkled structure strategy was proposed to construct ultra-thin, stretchable, and transparent terahertz shielding MXene films, which possesses both isotropous wrinkles (height about 50 nm) and periodic wrinkles (height about 500 nm). Compared to flat film, the wrinkled MXene film (8 nm) demonstrates a remarkable 36.5% increase in SE within the THz band. The wrinkled MXene film exhibits an EMI SE of 21.1 dB at the thickness of 100 nm, and an average EMI SE/t of 700 dB µm-1 over the 0.1-10 THz. Theoretical calculations suggest that the wrinkled structure enhances the film's conductivity and surface plasmon resonances, resulting in an improved THz wave absorption. Additionally, the wrinkled structure enhances the MXene films' stretchability and stability. After bending and stretching (at 30% strain) cycles, the average THz transmittance of the wrinkled film is only 0.5% and 2.4%, respectively. The outstanding performances of the wrinkled MXene film make it a promising THz electromagnetic shielding materials for future smart windows and wearable electronics.

Roll-to-Roll Manufacturing of Breathable Superhydrophobic Membranes.

Self-cleaning and anti-biofouling are both advantages for lotus-leaf-like superhydrophobic surfaces. Methods for creating superhydrophobicity, including chemical bonding low surface energy molecular fragments and constructing surface morphology with protrusions, micropores, and trapped micro airbags by traditional physical strategies, unfortunately, have encountered challenges. They often involve complex synthesis processes, stubborn chemical accumulation, brutal degradation, or infeasible calculation and imprecise modulation in fabricating hierarchical surface roughness. Here, a scalable method to prepare high-quality, breathable superhydrophobic membranes is proposed by developing a successive roll-to-roll laser manufacturing technique, which offers advantages over conventional fabrication approaches in enabling automatically large-scale production and ensuring cost-effectiveness. Nanosecond laser writing and femtosecond laser drilling produce surface microstructures and micropore arrays, respectively, endowing the membrane with superior antiwater capability with hierarchical microstructures forming a barrier and blocking water infiltration. The membrane's breathability is carefully optimized by tailoring micropore arrays to allow for the adequate passage of water vapor while maintaining superhydrophobicity. These membranes combine the benefits of anti-aqueous corrosive liquid behaviors, photothermal effects, thermoplastic properties, and stretchable performances as promising comprehensive materials in diverse scenes.

High-Throughput Automatic Laser Printing Strategy toward Cost-effective Portable Integrated Urea Tele-Monitoring System.

A portable sweat urea sensing system is a promising solution to satisfy the booming requirement of kidney function tele-monitoring. However, the complicated manufacturing route and the cumbersome electrochemical testing system still need to be improved to develop the urea point-of-care testing (POCT) and tele-monitoring devices. Here, a universal technical route based on a high-throughput automatic laser printing strategy for fabricating the portable integrated urea monitoring system is proposed. This integrated system includes a high-performance laser-printed urea sensing electrode, a planar three-electrode system, and a self-developed wireless mini-electrochemical workstation. A precursor donor layer is activated by laser scribing and in situ transferred into functional nanoparticles for the drop-on-demand printing of the urea sensing electrode. The obtained electrodes show high sensitivity, low detection limit, fast response time, high selectivity, good average recovery, and long-term stability for urea sensing. Additionally, a laser-induced graphene circuit-based miniature planar three-electrode system and a wireless mini-electrochemical workstation are designed for sensing data collection and transmitting, achieving real-time urea POCT and tele-monitoring. This scalable method provides a universal solution for high-throughput and ultra-fast fabrication of urea-sensing electrodes. The portable integrated urea monitoring system is a competitive option to achieve cost-effective POCT and tele-monitoring for kidney function.

Laser-Induced Transfer of Functional Materials.

Patterning is crucial for the large-scale application of functional materials. Laser-induced transfer is an emerging patterning method for additively depositing functional materials to the target acceptor. With the rapid development of laser technologies, this laser printing method emerges as a versatile method to deposit functional materials in either liquid or solid format. The emerging applications such as solar interfacial evaporation, solar cells, light-emitting diodes, sensors, high-output synthesis, and other fields are rising fields benefiting from laser-induced transfer. Following a brief introduction to the principles of laser-induced transfer, this review will comprehensively deliberate this novel additive manufacturing method, including preparing the donor layer and the applications, advantages, and limitations of this technique. Finally, perspectives for handling current and future functional materials using laser-induced transfer will also be discussed. Non-experts in laser technologies can also gain insights into this prevailing laser-induced transfer process, which may inspire their future research.

Ultra-sensitive, Multi-directional Flexible Strain Sensors Based on an MXene Film with Periodic Wrinkles.

The fast-growing motion capturing/monitoring technique has raised a great demand for flexible strain sensors. For capturing complex motions (e.g., facial motion), both the strain amplitude and direction should be accurately detected. Although some reported sensors based on anisotropic conductive networks are proved to show accurate localization of strain directions, it is still a great challenge to achieve both high sensitivity and a high sensing range in these designs. Here, a self-assembled Ti3C2Tx MXene film with parallel and periodic wrinkles is fabricated on a stretchable poly(dimethylsiloxane) substrate for constructing multi-directional strain sensors. During stretching, relative slip and crack will occur between the stacked MXene nanosheets, which contribute to high structural sensitivity in the MXene film. Meanwhile, the wrinkled structure contributes to high stretchability. As a result, the sensor based on the film with one-dimensional periodic wrinkles shows a large sensing range (>50%) and a gauge factor of 45. Furthermore, the sensor can accurately detect both the strain amplitude and direction by using the MXene film with two-dimensional wrinkles. It shows distinguishable electrical responses when detecting different-amplitude human/robot motions such as joint bending and walking. Additionally, the directions in complex human motions (e.g., facial motion) can also be well-tracked. This work provides an effective strategy to detect multi-directional motions.

GSK872 and necrostatin-1 protect retinal ganglion cells against necroptosis through inhibition of RIP1/RIP3/MLKL pathway in glutamate-induced retinal excitotoxic model of glaucoma.

BACKGROUND: Glaucoma, the major cause of irreversible blindness worldwide, is characterized by progressive degeneration of retinal ganglion cells (RGCs). Current treatments for glaucoma only slow or partially prevent the disease progression, failing to prevent RGCs death and visual field defects completely. Glutamate excitotoxicity via N-methyl-D-aspartic acid (NMDA) receptors plays a vital role in RGCs death in glaucoma, which is often accompanied by oxidative stress and NLRP3 inflammasome activation. However, the exact mechanisms remain unclear. METHODS: The glutamate-induced R28 cell excitotoxicity model and NMDA-induced mouse glaucoma model were established in this study. Cell counting kit-8, Hoechst 33342/PI dual staining and lactate dehydrogenase release assay were performed to evaluate cell viability. Annexin V-FITC/PI double staining was used to detect apoptosis and necrosis rate. Reactive oxygen species (ROS) and glutathione (GSH) were used to detect oxidative stress in R28 cells. Levels of proinflammatory cytokines were measured by qRT-PCR. Transmission electron microscopy (TEM) was used to detect necroptotic morphological changes in RGCs. Retinal RGCs numbers were detected by immunofluorescence. Hematoxylin and eosin staining was used to detect retinal morphological changes. The expression levels of RIP1, RIP3, MLKL and NLRP3 inflammasome-related proteins were measured by immunofluorescence and western blotting. RESULTS: We found that glutamate excitotoxicity induced necroptosis in RGCs through activation of the RIP1/RIP3/MLKL pathway in vivo and in vitro. Administration of the RIP3 inhibitor GSK872 and RIP1 inhibitor necrostatin-1 (Nec-1) prevented glutamate-induced RGCs loss, retinal damage, neuroinflammation, overproduction of ROS and a decrease in GSH. Furthermore, after suppression of the RIP1/RIP3/MLKL pathway by GSK872 and Nec-1, glutamate-induced upregulation of key proteins involved in NLRP3 inflammasome activation, including NLRP3, pro-caspase-1, cleaved-caspase-1, and interleukin-1ß (IL-1ß), was markedly inhibited. CONCLUSIONS: Our findings suggest that the RIP1/RIP3/MLKL pathway mediates necroptosis of RGCs and regulates NLRP3 inflammasome activation induced by glutamate excitotoxicity. Moreover, GSK872 and Nec-1 can protect RGCs from necroptosis and suppress NLRP3 inflammasome activation through inhibition of RIP1/RIP3/MLKL pathway, conferring a novel neuroprotective treatment for glaucoma.

Engineering Support and Distribution of Palladium and Tin on MXene with Modulation of the d-Band Center for CO-resilient Methanol Oxidation.

The efficiency of direct methanol fuel cell (DMFC) is largely determined by the activity and durability of methanol oxidation reaction (MOR) catalysts. Herein, we present a CO-resilient MOR catalyst of palladium-tin nano-alloy anchored on Se-doped MXene (PdSn0.5 /Se-Ti3 C2 ) via a progressive one-step electrochemical deposition strategy. MOR mass activity resulting from Pd/Se-Ti3 C2 catalyst (1046.2 mA mg-1 ) is over 2-fold larger than that of Pd/Ti3 C2 , suggesting that the introduction of Se atoms on MXene might accelerate the reaction kinetics. PdSn0.5 /Se-Ti3 C2 with Se-doping progress of MXene and the cooperated Pd-Sn sites has a superior MOR mass activity (4762.8 mA mg-1 ), outperforming many other reported Pd-based catalysts. Both experimental results and theoretical calculation reveal that boosted electron interaction of metal crystals with Se-doped MXene and optimized distribution of Pd-Sn sites can modulate the d band center, reduce adsorption energies of CO* at Pd site and enhance OH* generation at Sn site, resulting in highly efficient removal of CO intermediates by reaction with neighboring OH species on adjacent Sn sites.

Anchoring Oxidized MXene Nanosheets on Porous Carbon Nanotube Sponge for Enhancing Ion Transport and Pseudocapacitive Performance.

Two-dimensional (2D) MXene nanosheets are attractive for electrochemical energy storage applications due to their superior surface-controlled charge storage capacity. However, the slow ion transport in the closely packed electrode limits their electrochemical performances. Meanwhile, the restricted surface-controlled pseudocapacitance of MXene nanosheets requires to be enhanced. Herein, a well-controlled electrophoretic deposition strategy is developed to disperse Ti3C2Tx nanosheets into a freestanding, porous carbon nanotube (CNT) sponge. The constructed Ti3C2Tx@CNT hybrid sponge can provide high-speed ion-transport pathways for the charge-discharge process. Furthermore, by tuning the deposition potential, the inserted MXene nanosheets can be partially oxidized, boosting the pseudocapacitance performance. A large gravimetric capacitance of 468 F g-1 at 10 mV s-1 and a retention of 79.8% at 100 mV s-1 can be achieved in the Ti3C2Tx@CNT electrode. Meanwhile, the highest areal capacitance of 661 mF cm-2 at 1 mA cm-2 was obtained in the sample with high-loading Ti3C2Tx. For the assembled symmetric supercapacitor, 92.8% of the capacitance is retained after 10 000 cycles of the charge-discharge process at 10 mA cm-2. Thus, this study develops a promising electrophoretic deposition strategy for dispersing 2D MXene nanosheets and boosting their pseudocapacitive performance, resulting in a high-capacitive electrochemical energy storage electrode.

Nonsolid TiOx Nanoparticles/PVDF Nanocomposite for Improved Energy Storage Performance.

Nanofiller/polymer nanocomposites are promising dielectrics for energy harvesting to be applied in wearable and flexible electronics. The structural design of the nanofillers plays a vital role to improve the energy storage performance of the related nanocomposites. Here, we fabricate a flexible device based on nonsolid titanium oxide (TiOx) nanoparticles/poly(vinylidene fluoride) (PVDF) to achieve enhanced energy storage performance at low loading. The room-temperature oxidation method is used to oxidize two-dimensional MXene (Ti3C2Tx) flakes to form partially hollow TiOx nanoparticles. Taking advantage of this structure, the flexible TiOx nanoparticles/PVDF nanocomposite with an ultralow loading content of 1 wt % nanofillers shows high energy storage performance, including a dielectric constant of ≈22 at 1 kHz, a breakdown strength of ≈480 MV m-1, and an energy storage density of 7.43 J cm-3. The finite element simulation further reveals that the optimization of the energy storage performance is ascribed to the lower electric potential among the partially hollow TiOx nanoparticles, which enhances the breakdown strength of the nanocomposites. This work opens a new avenue to structurally design and fabricate low-loading polymer-based nanocomposites for energy storage applications in next-generation flexible electronics.

Metal-Organic Framework-Derived Core-Shell Nanospheres Anchored on Fe-Filled Carbon Nanotube Sponge for Strong Wideband Microwave Absorption.

Metal-organic frameworks (MOFs) are booming as a promising precursor for constructing lightweight, high-efficiency microwave absorbing (MA) material. However, it is still a challenge to rationally design three-dimensional (3D), porous MOF-derived MA materials with a stable structure and strong and wideband MA performance. Herein, a 3D hybrid nanostructure (CNT/FeCoNi@C) comprising MOF-derived magnetic nanospheres and Fe-filled carbon nanotube (CNT) sponge has been controllably fabricated to enhance the absorption ability and broaden the effective absorption bandwidth (EAB). The magnetic nanospheres are uniformly anchored on the CNT skeleton, forming hybrid network structures, which enhance interface polarization, electron transportation, and impedance matching. The minimum reflection loss (RL) and EAB of the as-prepared CNT/FeCoNi@C sponges reach -51.7 dB and 6.0 GHz, respectively, outperforming most reported MOF-based wave absorbers. This work provides not only a novel design of MOF-derived 3D nanostructures but also an effective guide for the optimization of electromagnetic properties and absorbing performance in MA material.

The roles of mitochondrial dynamics and NLRP3 inflammasomes in the pathogenesis of retinal light damage.

With the widespread popularity of electronic products and the diversification of lighting equipment, ocular photochemical damage caused by light has attracted research attention. Although such equipment mainly cause damage to the retina, the specific pathogenesis has not been systematically elucidated. Thus, the goal of this study was to explore the relationship between mitochondrial dysfunction and the activation of the NOD-like receptor protein 3 (NLRP3) inflammasome in retinal cell death caused by light damage. We used a white light-emitting diode source to establish a mouse model of retinal light damage and observed significant changes of retinal structure and an impairment of visual function. Further experiments revealed that dynamin-related protein 1 (Drp1)-mediated excessive mitochondrial fission induced overproduction of reactive oxygen species in the retinal cells, leading to apoptosis, activation of microglia, and formation of the NLRP3 inflammasome. This, in turn, triggered a series of inflammatory cascade reactions, leading to pyroptosis. We also carried out red light and Drp1 inhibitor treatment and found that retinal damage and the decline in visual function caused by white light could be partially ameliorated. In conclusion, this study clarified the association between mitochondrial dynamics and the NLRP3 inflammasome in retinal light damage and provides opportunities for therapeutic intervention.

Resistance Switching and Failure Behavior of the MoOx/Mo2C Heterostructure.

With the rapid demand for high-performance and power-efficient memristive and synaptic systems, more 2D heterostructures with improved resistance switching (RS) properties are still urgently in need for next-generation devices. Here, we report the RS behaviors of vertical MoOx/Mo2C heterostructures fabricated by controllable thermal oxidation and uncover the failure behavior for the first time. It is found that the MoOx/Mo2C heterostructure exhibits bipolar RS with a low set/reset voltage of +0.5/-0.3 V, an ultralow power consumption of 5 × 10-8 W, and an on/off ratio of 102, which is ascribed to the transport of the internal oxygen ions of MoOx. Furthermore, the failure behavior of RS behaviors of the MoOx/Mo2C heterostructure under a higher work voltage is revealed. It indicates that the amorphization of the pristine crystalline MoOx layer could block the movement of the internal oxygen ions in the vertical direction. The excellent RS performance induced by the synergy of MoOx and Mo2C and the demonstration of the failure behavior enable the potential applications of the 2D heterostructure in related memory devices and biological neural networks.

Ultrathin, Lightweight, and Flexible CNT Buckypaper Enhanced Using MXenes for Electromagnetic Interference Shielding.

Lightweight, flexibility, and low thickness are urgent requirements for next-generation high-performance electromagnetic interference (EMI) shielding materials for catering to the demand for smart and wearable electronic devices. Although several efforts have focused on constructing porous and flexible conductive films or aerogels, few studies have achieved a balance in terms of density, thickness, flexibility, and EMI shielding effectiveness (SE). Herein, an ultrathin, lightweight, and flexible carbon nanotube (CNT) buckypaper enhanced using MXenes (Ti3C2Tx) for high-performance EMI shielding is synthesized through a facile electrophoretic deposition process. The obtained Ti3C2Tx@CNT hybrid buckypaper exhibits an outstanding EMI SE of 60.5 dB in the X-band at 100 µm. The hybrid buckypaper with an MXene content of 49.4 wt% exhibits an EMI SE of 50.4 dB in the X-band with a thickness of only 15 µm, which is 105% higher than that of pristine CNT buckypaper. Furthermore, an average specific SE value of 5.7 × 104 dB cm2 g-1 is exhibited in the 5-µm hybrid buckypaper. Thus, this assembly process proves promising for the construction of ultrathin, flexible, and high-performance EMI shielding films for application in electronic devices and wireless communications.

CaMK II -induced Drp1 phosphorylation contributes to blue light-induced AIF-mediated necroptosis in retinal R28 cells.

Retinal damage caused by blue light has become an important public health concern. Mitochondria have been found to play a key role in light-induced retinal cell death. In this study, we aimed to clarify the molecular mechanism involved in mitochondrion-related retinal cell damage caused by blue light, the major component of light-emitting diodes (LEDs). Our results show that blue light (450 nm, 300lux)-induced R28 cell death is caspase independent and can be attenuated by necrostatin-1. Apoptosis-inducing factor (AIF) cleavage and translocation to the nucleus are involved in the cell death progress. Blue light exposure causes mitochondrial fragmentation, which is mediated by phosphorylation at dynamin-related protein 1 (Drp1) Ser616 site, but it does not alter the protein levels of fission or fusion machinery. Knocking down Drp1 or treatment with Drp1 inhibitor Mdivi-1 protects R28 cells from blue light. Overproduction of reactive oxygen species (ROS) is induced by blue light. The ROS scavenger Trolox decreases Drp1 Ser616 phosphorylation level and mitochondrial fragmentation upon blue light exposure. Moreover, Calcium/calmodulin-dependent protein kinase II (CaMKII) inhibitor KN93 blocks Drp1 phosphorylation and rescues mitochondrial fragmentation and AIF-mediated cell death caused by blue light. In conclusion, our data suggest that the CaMKII-Drp1 pathway plays a major role in blue light-induced AIF-mediated retinal cell damage.

Fabrication of MoOx/Mo2C-Layered Hybrid Structures by Direct Thermal Oxidation of Mo2C.

Two-dimensional (2D) Mo2C, as a new member of transition metal carbides, has many intriguing properties and potential applications in superconductors and electronic devices. The thermal stability of 2D materials is essential for the performance of the related devices, especially the ones with a vertical heterostructure. However, rare reports have demonstrated the thermal stability of Mo2C and the effects of thermal stability on its performance. Here, we propose a facile and controllable method to directly oxidize Mo2C to MoOx, forming a MoOx/Mo2C heterostructure. During the oxidization process, an in situ technique is employed to uncover the transformation and thermal stability of the Mo2C. The chemical vapor deposition Mo2C shows high structural stability below 550 °C in Ar or below 350 °C in O2, which demonstrates the high thermal stability and antioxidation of the Mo2C film. The metallic Mo2C is gradually oxidized to semiconducting MoOx as the temperature increases above 350 °C. The oxidization rate can be easily controlled by adjusting the oxidation temperature and time. Further, the obtained MoOx/Mo2C vertical hybrid structure shows obvious Schottky junction behaviors, strongly indicating the perfect interfacial contact between the component layers. This work offers a new strategy for the controllable fabrication of high-quality 2D heterostructures.

Direct Patterning of Carbon Nanotube via Stamp Contact Printing Process for Stretchable and Sensitive Sensing Devices.

Flexible and wearable sensing devices have broad application prospects in bio-monitoring such as pulse measurement, motion detection and voice recognition. In recent years, many significant improvements had been made to enhance the sensor's performance including sensitivity, flexibility and repeatability. However, it is still extremely complicated and difficult to prepare a patterned sensor directly on a flexible substrate. Herein, inspired by typography, a low-cost, environmentally friendly stamping method for the mass production of transparent conductive carbon nanotube (CNT) film is proposed. In this dry transfer strategy, a porous CNT block was used as both the seal and the ink; and Ecoflex film was served as an object substrate. Well-designed CNT patterns can be easily fabricated on the polymer substrate by engraving the target pattern on the CNT seal before the stamping process. Moreover, the CNT film can be directly used to fabricate ultrathin (300 µm) strain sensor. This strain sensor possesses high sensitivity with a gauge factor (GF) up to 9960 at 85% strain, high stretchability (> 200%) and repeatability (> 5000 cycles). It has been used to measure pulse signals and detect joint motion, suggesting promising application prospects in flexible and wearable electronic devices.

In situ sulfur loading in graphene-like nano-cell by template-free method for Li-S batteries.

Carbon nanomaterials with 3D structures as sulfur hosts have been widely developed in lithium-sulfur batteries because of their high specific surface area, high conductivity and structural stability. However, sulfur, loaded by melting-diffusion method, is usually attached to the outside surface of carbon host, resulting in weak adsorption to expose polysulfide. Herein, we report a template-free method for synthesizing graphene-like nano-cell (GLC) with high in situ sulfur loading (S@GLC). The GLC is expected to provide physical adsorption by enclosed graphene cell architecture and chemical adsorption by pyridinic N-doping and oxygen functional group. With these merits, the S@GLC cathode owned high sulfur content (72%) and also, it exhibited a reversible specific capacity of 1253 mA h g-1 at 0.2C, excellent rate performance, and long cycling stability (502 mA h g-1 after 400 cycles at 1C).

Highly Sensitive, Flexible MEMS Based Pressure Sensor with Photoresist Insulation Layer.

Pressure sensing is a crucial function for flexible and wearable electronics, such as artificial skin and health monitoring. Recent progress in material and device structure of pressure sensors has brought breakthroughs in flexibility, self-healing, and sensitivity. However, the fabrication process of many pressure sensors is too complicated and difficult to integrate with traditional silicon-based Micro-Electro-Mechanical System(MEMS). Here, this study demonstrates a scalable and integratable contact resistance-based pressure sensor based on a carbon nanotube conductive network and a photoresist insulation layer. The pressure sensors have high sensitivity (95.5 kPa-1 ), low sensing threshold (16 Pa), fast response speed (<16 ms), and zero power consumption when without loading pressure. The sensitivity, sensing threshold, and dynamic range are all tunable by conveniently modifying the hole diameter and thickness of insulation layer.