High Sensitivity and Wide Linear Range Flexible Piezoresistive Pressure Sensor with Microspheres as Spacers for Pronunciation Recognition.

Flexible piezoresistive pressure sensors have received great popularity in flexible electronics due to their simple structure and promising applications in health monitoring and artificial intelligence. However, the contradiction between sensitivity and detection range limits the application of the sensors in the medium-pressure regime. Here, a flexible piezoresistive pressure sensor is fabricated by combining a hierarchical spinous microstructure sensitive layer and a periodic microsphere array spacer. The sensor achieves high sensitivity (39.1 kPa-1) and outstanding linearity (0.99, R2 coefficient) in a medium-pressure regime, as well as a wide range of detection (100 Pa-160.0 kPa), high detection precision (<0.63‰ full scale), and excellent durability (>5000 cycles). The mechanism of the microsphere array spacer in improving sensitivity and detection range was revealed through finite element analysis. Furthermore, the sensors have been utilized to detect muscle and joint movements, spatial pressure distributions, and throat movements during pronouncing words. By means of a full-connect artificial neural network for machine learning, the sensor's output of different pronounced words can be precisely distinguished and classified with an overall accuracy of 96.0%. Overall, the high-performance flexible pressure sensor based on a microsphere array spacer has great potential in health monitoring, human-machine interface, and artificial intelligence of medium-pressure regime.

Stretchable, Transparent, and Ultra-Broadband Terahertz Shielding Thin Films Based on Wrinkled MXene Architectures.

With the increasing demand for terahertz (THz) technology in security inspection, medical imaging, and flexible electronics, there is a significant need for stretchable and transparent THz electromagnetic interference (EMI) shielding materials. Existing EMI shielding materials, like opaque metals and carbon-based films, face challenges in achieving both high transparency and high shielding efficiency (SE). Here, a wrinkled structure strategy was proposed to construct ultra-thin, stretchable, and transparent terahertz shielding MXene films, which possesses both isotropous wrinkles (height about 50 nm) and periodic wrinkles (height about 500 nm). Compared to flat film, the wrinkled MXene film (8 nm) demonstrates a remarkable 36.5% increase in SE within the THz band. The wrinkled MXene film exhibits an EMI SE of 21.1 dB at the thickness of 100 nm, and an average EMI SE/t of 700 dB µm-1 over the 0.1-10 THz. Theoretical calculations suggest that the wrinkled structure enhances the film's conductivity and surface plasmon resonances, resulting in an improved THz wave absorption. Additionally, the wrinkled structure enhances the MXene films' stretchability and stability. After bending and stretching (at 30% strain) cycles, the average THz transmittance of the wrinkled film is only 0.5% and 2.4%, respectively. The outstanding performances of the wrinkled MXene film make it a promising THz electromagnetic shielding materials for future smart windows and wearable electronics.

Flexible, Transparent and Conductive Metal Mesh Films with Ultra-High FoM for Stretchable Heating and Electromagnetic Interference Shielding.

Despite the growing demand for transparent conductive films in smart and wearable electronics for electromagnetic interference (EMI) shielding, achieving a flexible EMI shielding film, while maintaining a high transmittance remains a significant challenge. Herein, a flexible, transparent, and conductive copper (Cu) metal mesh film for EMI shielding is fabricated by self-forming crackle template method and electroplating technique. The Cu mesh film shows an ultra-low sheet resistance (0.18 Ω â–¡-1), high transmittance (85.8%@550 nm), and ultra-high figure of merit (> 13,000). It also has satisfactory stretchability and mechanical stability, with a resistance increases of only 1.3% after 1,000 bending cycles. As a stretchable heater (ε > 30%), the saturation temperature of the film can reach over 110 °C within 60 s at 1.00 V applied voltage. Moreover, the metal mesh film exhibits outstanding average EMI shielding effectiveness of 40.4 dB in the X-band at the thickness of 2.5 µm. As a demonstration, it is used as a transparent window for shielding the wireless communication electromagnetic waves. Therefore, the flexible and transparent conductive Cu mesh film proposed in this work provides a promising candidate for the next-generation EMI shielding applications.

Flexible, Transparent, and Wafer-Scale Artificial Synapse Array Based on TiOx /Ti3 C2 Tx Film for Neuromorphic Computing.

A high-density neuromorphic computing memristor array based on 2D materials paves the way for next-generation information-processing components and in-memory computing systems. However, the traditional 2D-materials-based memristor devices suffer from poor flexibility and opacity, which hinders the application of memristors in flexible electronics. Here, a flexible artificial synapse array based on TiOx /Ti3 C2 Tx film is fabricated by a convenient and energy-efficient solution-processing technique, which realizes high transmittance (≈90%) and oxidation resistance (>30 days). The TiOx /Ti3 C2 Tx memristor shows low device-to-device variability, long memory retention and endurance, a high ON/OFF ratio, and fundamental synaptic behavior. Furthermore, satisfactory flexibility (R = 1.0 mm) and mechanical endurance (104 bending cycles) of the TiOx /Ti3 C2 Tx memristor are achieved, which is superior to other film memristors prepared by chemical vapor deposition. In addition, high-precision (>96.44%) MNIST handwritten digits recognition classification simulation indicates that the TiOx /Ti3 C2 Tx artificial synapse array holds promise for future neuromorphic computing applications, and provides excellent high-density neuron circuits for new flexible intelligent electronic equipment.

Ultra-sensitive, Multi-directional Flexible Strain Sensors Based on an MXene Film with Periodic Wrinkles.

The fast-growing motion capturing/monitoring technique has raised a great demand for flexible strain sensors. For capturing complex motions (e.g., facial motion), both the strain amplitude and direction should be accurately detected. Although some reported sensors based on anisotropic conductive networks are proved to show accurate localization of strain directions, it is still a great challenge to achieve both high sensitivity and a high sensing range in these designs. Here, a self-assembled Ti3C2Tx MXene film with parallel and periodic wrinkles is fabricated on a stretchable poly(dimethylsiloxane) substrate for constructing multi-directional strain sensors. During stretching, relative slip and crack will occur between the stacked MXene nanosheets, which contribute to high structural sensitivity in the MXene film. Meanwhile, the wrinkled structure contributes to high stretchability. As a result, the sensor based on the film with one-dimensional periodic wrinkles shows a large sensing range (>50%) and a gauge factor of 45. Furthermore, the sensor can accurately detect both the strain amplitude and direction by using the MXene film with two-dimensional wrinkles. It shows distinguishable electrical responses when detecting different-amplitude human/robot motions such as joint bending and walking. Additionally, the directions in complex human motions (e.g., facial motion) can also be well-tracked. This work provides an effective strategy to detect multi-directional motions.

Anchoring Oxidized MXene Nanosheets on Porous Carbon Nanotube Sponge for Enhancing Ion Transport and Pseudocapacitive Performance.

Two-dimensional (2D) MXene nanosheets are attractive for electrochemical energy storage applications due to their superior surface-controlled charge storage capacity. However, the slow ion transport in the closely packed electrode limits their electrochemical performances. Meanwhile, the restricted surface-controlled pseudocapacitance of MXene nanosheets requires to be enhanced. Herein, a well-controlled electrophoretic deposition strategy is developed to disperse Ti3C2Tx nanosheets into a freestanding, porous carbon nanotube (CNT) sponge. The constructed Ti3C2Tx@CNT hybrid sponge can provide high-speed ion-transport pathways for the charge-discharge process. Furthermore, by tuning the deposition potential, the inserted MXene nanosheets can be partially oxidized, boosting the pseudocapacitance performance. A large gravimetric capacitance of 468 F g-1 at 10 mV s-1 and a retention of 79.8% at 100 mV s-1 can be achieved in the Ti3C2Tx@CNT electrode. Meanwhile, the highest areal capacitance of 661 mF cm-2 at 1 mA cm-2 was obtained in the sample with high-loading Ti3C2Tx. For the assembled symmetric supercapacitor, 92.8% of the capacitance is retained after 10 000 cycles of the charge-discharge process at 10 mA cm-2. Thus, this study develops a promising electrophoretic deposition strategy for dispersing 2D MXene nanosheets and boosting their pseudocapacitive performance, resulting in a high-capacitive electrochemical energy storage electrode.

Nonsolid TiOx Nanoparticles/PVDF Nanocomposite for Improved Energy Storage Performance.

Nanofiller/polymer nanocomposites are promising dielectrics for energy harvesting to be applied in wearable and flexible electronics. The structural design of the nanofillers plays a vital role to improve the energy storage performance of the related nanocomposites. Here, we fabricate a flexible device based on nonsolid titanium oxide (TiOx) nanoparticles/poly(vinylidene fluoride) (PVDF) to achieve enhanced energy storage performance at low loading. The room-temperature oxidation method is used to oxidize two-dimensional MXene (Ti3C2Tx) flakes to form partially hollow TiOx nanoparticles. Taking advantage of this structure, the flexible TiOx nanoparticles/PVDF nanocomposite with an ultralow loading content of 1 wt % nanofillers shows high energy storage performance, including a dielectric constant of ≈22 at 1 kHz, a breakdown strength of ≈480 MV m-1, and an energy storage density of 7.43 J cm-3. The finite element simulation further reveals that the optimization of the energy storage performance is ascribed to the lower electric potential among the partially hollow TiOx nanoparticles, which enhances the breakdown strength of the nanocomposites. This work opens a new avenue to structurally design and fabricate low-loading polymer-based nanocomposites for energy storage applications in next-generation flexible electronics.

Metal-Organic Framework-Derived Core-Shell Nanospheres Anchored on Fe-Filled Carbon Nanotube Sponge for Strong Wideband Microwave Absorption.

Metal-organic frameworks (MOFs) are booming as a promising precursor for constructing lightweight, high-efficiency microwave absorbing (MA) material. However, it is still a challenge to rationally design three-dimensional (3D), porous MOF-derived MA materials with a stable structure and strong and wideband MA performance. Herein, a 3D hybrid nanostructure (CNT/FeCoNi@C) comprising MOF-derived magnetic nanospheres and Fe-filled carbon nanotube (CNT) sponge has been controllably fabricated to enhance the absorption ability and broaden the effective absorption bandwidth (EAB). The magnetic nanospheres are uniformly anchored on the CNT skeleton, forming hybrid network structures, which enhance interface polarization, electron transportation, and impedance matching. The minimum reflection loss (RL) and EAB of the as-prepared CNT/FeCoNi@C sponges reach -51.7 dB and 6.0 GHz, respectively, outperforming most reported MOF-based wave absorbers. This work provides not only a novel design of MOF-derived 3D nanostructures but also an effective guide for the optimization of electromagnetic properties and absorbing performance in MA material.

Superior Stability Secured by a Four-Phase Cathode Electrolyte Interface on a Ni-Rich Cathode for Lithium Ion Batteries.

A multifunctional coating with high ionic and electronic conductivity is constructed on the surface of LiNi0.8Co0.1Mn0.1O2 (NCM) to boost the battery stability upon cycling and during storage as well. Phosphoric acid reacts with residual lithium species on the pristine NCM to form a Li3PO4 coating with extra carbon nanotubes (CNTs) penetrating through, which shows high ionic and electronic conductivity. NCM, Li3PO4, CNTs, and the electrolyte jointly form a four-phase cathode electrolyte interface, which plays a key role in the great enhancement of capacity retention, from 50.3% for pristine NCM to 84.8% for the modified one after 500 cycles at 0.5C at room temperature. The modified NCM also delivers superior electrochemical performances at a high cut-off voltage (4.5 V), high temperature (55 °C), and high rate (10C). Furthermore, it can deliver 154.2 mA h g-1 at the 500th cycle after exposed to air with high humidity for 2 weeks. These results demonstrate that the well-constructed multifunctional coating can remarkably enhance the chemical and electrochemical performances of NCM. The improved cycling, storage, and rate performance are attributed to the four-phase cathode electrolyte interface delivering high electron and ionic conductivity and securing the cathode against attack. This work broadens the horizon for constructing effective electrode/electrolyte interfaces for electrochemical energy storage and conversion.