Preparation and characterization of vitamin E microcapsules stabilized by Zein with different polysaccharides.

Vitamin E (VE) microencapsulation using a green surfactant emulsifier not only protects the active substance and is also environmentally friendly. In this study, we used alcohol ether glycoside as an emulsifier to prepare VE microcapsules using the biological macromolecule Zein and various polysaccharides. The resulting nano microcapsules exhibited a spherical structure, stable morphology, uniform size, and a >90% encapsulation efficiency. They also had good thermal stability and slow-release properties. Of these, xanthan gum/Zein-VE microcapsules were superior, with antioxidant properties up to 3.05-fold higher than untreated VE. We successfully developed VE nano microcapsules that meet eco-friendly and sustainable requirements, which may have applications in the food and pharmaceutical industries.

Composite System of Lauryl Glucoside and Lauryl Glycoside Sulfosuccinate: Properties and Applications in Vitamin E Nanoemulsions.

The synergistic effect of surfactant compounding on performance can be leveraged to enhance product application performance. An investigation of the surface tension and emulsification properties revealed the complex synergistic effect of the composite system comprising lauryl glucoside (LG) and lauryl glycoside sulfosuccinate (LG-SS). The composite system was used as an emulsifier for vitamin E (VE) emulsification. VE nanoemulsions with high VE content were successfully prepared. The nanoemulsion appears homogeneous and transparent and has an average size of approximately 200 nm. It has better temperature and centrifugal stability, an antioxidant capacity 2.89 times that of untreated VE, and is not easily oxidized and deactivated. In this study, we successfully constructed a complex system of LG and its derivatives and applied it to VE emulsification - this is a step toward expanding the effective application of glycosides and their derivative composite systems in food, pharmaceutics, and other industries.

Self-assembly mechanism, physicochemical analyses and application performance investigations of branched alkyl glycosides with alcohol ether carboxylic acids of varied epoxide numbers.

Green surfactants, specifically alkyl glycosides and fatty alcohol ether carboxylic acids, are known for their biocompatibility, multiresponsiveness, and versatile applications, garnering significant attention in the realms of green and colloid chemistry. This study systematically investigated the mechanism underlying micelle formation within aqueous solutions comprising alcohol ether carboxylic acids featuring diverse EO group chain quantities (AEC-nH, where n equals 5, 7, and 9) and branched alkyl glycosides (IG). The elucidation of these mechanisms sheds light on their prospective application properties. It was observed that the self-assembly of micelles in these hybrid systems is predominantly influenced by hydrogen bonding, electrostatic interactions, and hydrophobic forces. The spherical-rod morphology of the micelles responds to the varying numbers of EO group chains, with an increased number of EO leading to the formation of rod-like micelles, which exhibit relative instability, while a decreased number of EO results in the formation of spherical micelles with relative stability. Additionally, by means of kinetic analysis, it was determined that the micelle formation process of the three hybrid systems is driven by enthalpy, and a mixed diffusion-kinetics adsorption mechanism is involved in the adsorption process. These findings significantly impact their application properties. This report stands as the first exploration of the synergistic mechanisms and application performance of two types of green surfactants in aqueous solutions, considering the influence of different numbers of EO group chains. Not only does it provide fundamental insights into their properties, but it also offers novel perspectives on the applications of green surface activation.

Validation of Three Tools for Estimating the Risk of Primary Osteoporosis in an Elderly Male Population in Beijing.

Purpose: This cross-sectional study estimated three clinical tools including the Osteoporosis Self-Assessment Tool for Asians (OSTA), Body Mass Index (BMI), and Beijing Friendship Hospital Osteoporosis Self-assessment Tool for Elderly Male (BFH-OSTM) for identifying primary osteoporosis and found optimal cut-off values in an elderly Han Beijing male population. Materials and Methods: We conducted a cross-sectional study, enrolling 400 community-dwelling elderly Han Beijing males aged ≥50 from 8 medical institutions. Osteoporosis was diagnosed as a T-score of -2.5 standard deviations or lower than that of the average young adult in different diagnostic criteria [lumbar spine (L1-L4), femoral neck, total hip, WHO]. BFH-OSTM, OSTA, and BMI were assessed for predicting OP by receiver operating characteristic (ROC) curves. Sensitivity, specificity, and areas under the ROC curves (AUC) were determined. Ideal thresholds for the omission of screening BMD were proposed. Results: The prevalence of osteoporosis ranged from 9.25% to 19.0% according to different diagnostic criteria. The present study indicated the highest discriminating ability was BFH-OSTM in different criteria. The AUCs of OSTA and BMI were 0.748 and 0.770 in WHO criteria, which suggested limiting predictive value for identifying OP in elderly Beijing males. The AUC of BFH-OSTM to predict OP based on WHO criteria was 0.827, yielding a sensitivity of 65.8% and specificity of 82.7%, respectively. With a cost of missing 6.5% of osteoporosis patients, BFH-OSTM could reduce 73.5% of participants in screening BMD tests. Conclusion: BFH-OSTM may be a simple and effective tool for identifying OP in the elderly male population in Beijing to omit BMD screening reasonably.

Study on the Properties of the Sodium Lauroyl Glycinate and Sodium Lauroyl Lactylate Composite System.

The scientific community has shown a great deal of interest in sodium lauroyl glycine (SLG) and sodium lauroyl lactylate (SLL), two sustainable and eco-friendly substances that are considered as potential bio-friendly alternatives for petrochemical-based amphiphiles. In the present work, the formation of mixed micelle for SLG and SLL surfactant in water was investigated. Meanwhile, the surface interaction and thermodynamic parameters were calculated according to the surface tension curves. The results indicated that at certain ratios, SLG/SLL surfactant mixtures had synergistic effects that could yield higher surface activity and improve application performance. When the mole fraction of SLL (αSLL) was 0.4, γcmc achieved a minimum of 22.6 mN m-1 and displayed the best foaming properties. The mixed solution exhibited the best wetting ability when αSLL was 0.6. While αSLL was 0.8, the mixed solution showed the optimum dynamic adsorption properties. And it was found that the antibacterial property of SLG and SLL could be partially preserved after compounding. These results demonstrated for the first time that the mixed environmentally friendly surfactant SLG and SLL has a promising prospect for use in the personal care, detergent, and cosmetic industries.

Comparison of three tools for predicting primary osteoporosis in an elderly male population in Beijing: a cross-sectional study.

PURPOSE: In this cross-sectional study, three clinical tools, the Osteoporosis Self-Assessment Tool for Asians (OSTA), Fracture Risk Assessment Tool (FRAX) without bone mineral density (BMD), and body mass index (BMI), for predicting primary osteoporosis (OP) were compared and ideal thresholds for omission of screening BMD were proposed in a community-dwelling elderly Han Beijing male population. PATIENTS AND METHODS: A total of 1,349 community-dwelling elderly Han Beijing males aged ≥50 years were enrolled in this study. All subjects completed a questionnaire and measured BMD by dual-energy X-ray absorptiometry (DXA). Osteoporosis was defined as a T-score of -2.5 SD or lower than that of the average young adult in different diagnostic criteria (lumbar spine [L1-L4], femoral neck, total hip, worst hip, and World Health Organization [WHO]). FRAX without BMD, OSTA, and BMI were assessed for predicting OP by receiver operating characteristic (ROC) curves. Sensitivity, specificity, and areas under the ROC curves (AUCs) were determined. Ideal thresholds for omission of screening BMD were proposed. RESULTS: The prevalence of OP ranged from 1.8% to 12.8% according to different diagnostic criteria. This study showed that the BMI has highest discriminating ability. The AUC of FRAX without BMD ranged from 0.536 to 0.630, which suggested limiting predictive value for identifying OP in elderly Beijing male. The AUCs of BMI (0.801-0.880) were slightly better than OSTA (0.722-0.874) in predicting OP at all sites. The AUC of BMI to identify OP in worst hip was 0.824, yielding a sensitivity of 84.8% and a specificity of 64.4%. 40% of participants on BMD measurements saved only 0.1%-2.7% missed OP. Compared to OSTA and FRAX without BMD, the BMI got the best predictive value for OP. CONCLUSION: BMI may be a simple and effective tool for identifying OP in the elderly male population in Beijing to omit BMD screening reasonably.

BFH-OSTM, a new predictive screening tool for identifying osteoporosis in elderly Han Chinese males.

PURPOSE: To develop and validate a new clinical screening tool to identify primary osteoporosis by dual-energy X-ray absorptiometry (DXA) in two elderly Han Chinese male populations. METHODS: A cross-sectional study was conducted, enrolling 1,870 community-dwelling and 574 hospital-checkup elderly Han Chinese males aged ≥50 years. All subjects completed a structured questionnaire and had their bone mineral density (BMD) measured using DXA. Using logistic regression analysis in the 1,870 community-dwelling males, we assessed the ability of numerous potential clinical risk factors to identify male with osteoporosis. Multiple variable regression analysis and item reduction yielded a final tool named the Beijing Friendship Hospital Osteoporosis Self-assessment Tool for Elderly Male (BFH-OSTM). Receiver operating characteristic (ROC) curve was generated to compare the validation of the BFH-OSTM and Osteoporosis Self-assessment Tool for Asians (OSTA) for identifying elderly male at increased the risk of primary osteoporosis in the 574 hospital-checkup males. RESULTS: In screening the 1,870 community-dwelling subjects with DXA, 14.2% (266/1,870) had osteoporosis, and a further 51.8% (969/1,870) had osteopenia. Of the items screened in the questionnaire, weight, height and previous history of fragility fracture were predictive of osteoporosis. A final tool (BFH-OSTM) was based on body weight and fragility fracture history only. The BFH-OSTM index (cutoff =70) had a sensitivity of 85% and specificity of 53% for identifying osteoporosis according to the WHO criteria, with an area under the ROC curve of 0.763. The predictive value of BFH-OSTM was validated in the 574 hospital-checkup population, which performed better than OSTA. CONCLUSION: The BFH-OSTM may perform well for identifying elderly male at increased risk for osteoporosis and applying it would result in more prudent use of BMD measurement by DXA, especially for Han Chinese male.

[Investigation of osteoporosis prevalence and osteoporosis-related clinical risk factors among healthy elderly male].

OBJECTIVE: To investigate the osteoporosis prevalence and osteoporosis-related clinical risk factors among healthy elderly male. METHODS: A cross-sectional study was conducted from January 2014 to October 2014. Healthy elderly male aged 50 and above from Beijing WangZuo Community who had completed the questionnaire we made were enrolled in this study and accepted bone mineral density (BMD) testing by dual energy X-ray absorptiometry. Subjects were classified as the osteoporosis group (OP group) and the non-osteoporosis group (Non-OP group) according to the WHO criteria, of which osteoporosis was defined arbitrarily when any T-score was -2.5 standard deviations or less at femoral neck, total hip or lumbar spine (L1-4). The clinical risk factors of each subject including age, body weight, Body Mass Index (BMI), previous fragility fracture history, smoking, alcohol abuse, glucocorticoid therapy and other capable clinical risk factors were collected and compared in OP group and Non-OP group. RESULTS: In the 346 cases of elderly healthy men, 18.5% had osteoporosis, 55.5% had osteopenia and 26.0% were normal. Femoral neck's and total hip's BMD level decreased with increasing age. However, the trend was not found at lumbar spine site. There appeared to be a significant difference in BMD standard between lumbar vertebral and total hip when compared with age-matched cohorts (P<0.05). Weight, BMI, previous fragility fracture history and smoking were found significant differences between OP group and Non-OP group (P<0.05). CONCLUSIONS: The prevalence of osteoporosis in healthy older men should not be ignored. Low BMI and weight, previous fragility fracture history and smoking history were clinical risk factors of OP in this population.