Interface Dipole Management of D-A-Type Molecules for Efficient Perovskite Solar Cells.

Interfacial engineering of perovskite films has been the main strategies in improving the efficiency and stability of perovskite solar cells (PSCs). In this study, three new donor-acceptor (D-A)-type interfacial dipole (DAID) molecules with hole-transporting and different anchoring units are designed and employed in PSCs. The formation of interface dipoles by the DAID molecules on the perovskite film can efficiently modulate the energy level alignment, improve charge extraction, and reduce non-radiative recombination. Among the three DAID molecules, TPA-BAM with amide group exhibits the best chemical and optoelectrical properties, achieving a champion PCE of 25.29% with the enhanced open-circuit voltage of 1.174 V and fill factor of 84.34%, due to the reduced defect density and improved interfacial hole extraction. Meanwhile, the operational stability of the unencapsulated device has been significantly improved. Our study provides a prospect for rationalized screening of interfacial dipole materials for efficient and stable PSCs.

Dualistic insulator states in 1T-TaS2 crystals.

While the monolayer sheet is well-established as a Mott-insulator with a finite energy gap, the insulating nature of bulk 1T-TaS2 crystals remains ambiguous due to their varying dimensionalities and alterable interlayer coupling. In this study, we present a unique approach to unlock the intertwined two-dimensional Mott-insulator and three-dimensional band-insulator states in bulk 1T-TaS2 crystals by structuring a laddering stack along the out-of-plane direction. Through modulating the interlayer coupling, the insulating nature can be switched between band-insulator and Mott-insulator mechanisms. Our findings demonstrate the duality of insulating nature in 1T-TaS2 crystals. By manipulating the translational degree of freedom in layered crystals, our discovery presents a promising strategy for exploring fascinating physics, independent of their dimensionality, thereby offering a "three-dimensional" control for the era of slidetronics.

Efficient Homojunction Tin Perovskite Solar Cells Enabled by Gradient Germanium Doping.

P-type self-doping is known to hamper tin-based perovskites for developing high-performance solar cells by increasing the background current density and carrier recombination processes. In this work, we propose a gradient homojunction structure with germanium doping that generates an internal electric field across the perovskite film to deplete the charge carriers. This structure reduces the dark current density of perovskite by over 2 orders of magnitude and trap density by an order of magnitude. The resultant tin-based perovskite solar cells exhibit a higher power conversion efficiency of 13.3% and excellent stability, maintaining 95% and 85% of their initial efficiencies after 250 min of continuous illumination and 3800 h of storage, respectively. We reveal the homojunction formation mechanism using density functional theory calculations and molecular level characterizations. Our work provides a reliable strategy for controlling the spatial energy levels in tin perovskite films and offers insights into designing intriguing lead-free perovskite optoelectronics.

A Catalyst-Like System Enables Efficient Perovskite Solar Cells.

High-quality perovskite films are essential for achieving high performance of optoelectronic devices; However, solution-processed perovskite films are known to suffer from compositional and structural inhomogeneity due to lack of systematic control over the kinetics during the formation. Here, the microscopic homogeneity of perovskite films is successfully enhanced by modulating the conversion reaction kinetics using a catalyst-like system generated by a foaming agent. The chemical and structural evolution during this catalytic conversion is revealed by a multimodal synchrotron toolkit with spatial resolutions spanning many length scales. Combining these insights with computational investigations, a cyclic conversion pathway model is developed that yields exceptional perovskite homogeneity due to enhanced conversion, having a power conversion efficiency of 24.51% for photovoltaic devices. This work establishes a systematic link between processing of precursor and homogeneity of the perovskite films.

Self-Polymerized Spiro-Type Interfacial Molecule toward Efficient and Stable Perovskite Solar Cells.

In the pursuit of highly efficient perovskite solar cells, spiro-OMeTAD has demonstrated recorded power conversion efficiencies (PCEs), however, the stability issue remains one of the bottlenecks constraining its commercial development. In this study, we successfully synthesize a novel self-polymerized spiro-type interfacial molecule, termed v-spiro. The linearly arranged molecule exhibits stronger intermolecular interactions and higher intrinsic hole mobility compared to spiro-OMeTAD. Importantly, the vinyl groups in v-spiro enable in situ polymerization, forming a polymeric protective layer on the perovskite film surface, which proves highly effective in suppressing moisture degradation and ion migration. Utilizing these advantages, poly-v-spiro-based device achieves an outstanding efficiency of 24.54 %, with an enhanced open-circuit voltage of 1.173 V and a fill factor of 81.11 %, owing to the reduced defect density, energy level alignment and efficient interfacial hole extraction. Furthermore, the operational stability of unencapsulated devices is significantly enhanced, maintaining initial efficiencies above 90 % even after 2000 hours under approximately 60 % humidity or 1250 hours under continuous AM 1.5G sunlight exposure. This work presents a comprehensive approach to achieving both high efficiency and long-term stability in PSCs through innovative interfacial design.

High-Performance Blue Perovskite Light-Emitting Diodes Enabled by Synergistic Effect of Additives.

While quasi-two-dimensional (quasi-2D) perovskites have good properties of cascade energy transfer, high exciton binding energy, and high quantum efficiency, which will benefit high-efficiency blue PeLEDs, inefficient domain distribution management and unbalanced carrier transport impede device performance improvement. Herein, (2-(9H-carbazol-9-yl)ethyl)phosphonic acid (2PACz) and methyl 2-aminopyridine-4-carboxylate (MAC) were simultaneously introduced to a blue quasi-2D perovskite film. Relying on the synergistic effect of 2PACz and MAC, it not only modulates the phase distribution inhibiting the n = 2 phase but also greatly improves the electrical property of the quasi-2D perovskite film. As a result, the as-modified blue quasi-2D PeLED demonstrated an external quantum efficiency (EQE) of 17.08% and a luminance of 10142 cd m-2. This study exemplifies the synergistic effect among dual additives and offers a new effective additive strategy modulating phase distribution and building balanced carrier transport, which paves the way for the fabrication of highly efficient blue PeLEDs.

Polydentate Ligand Reinforced Chelating to Stabilize Buried Interface toward High-Performance Perovskite Solar Cells.

The instability of the buried interface poses a serious challenge for commercializing perovskite photovoltaic technology. Herein, we report a polydentate ligand reinforced chelating strategy to strengthen the stability of buried interface by managing interfacial defects and stress. The bis(2,2,2-trifluoroethyl) (methoxycarbonylmethyl)phosphonate (BTP) is employed to manipulate the buried interface. The C=O, P=O and two -CF3 functional groups in BTP synergistically passivate the defects from the surface of SnO2 and the bottom surface of the perovskite layer. Moreover, The BTP modification contributes to mitigated interfacial residual tensile stress, promoted perovskite crystallization, and reduced interfacial energy barrier. The multidentate ligand modulation strategy is appropriate for different perovskite compositions. Due to much reduced nonradiative recombination and heightened interface contact, the device with BTP yields a promising power conversion efficiency (PCE) of 24.63 %, which is one of the highest efficiencies ever reported for devices fabricated in the air environment. The unencapsulated BTP-modified devices degrade to 98.6 % and 84.2 % of their initial PCE values after over 3000 h of aging in the ambient environment and after 1728 h of thermal stress, respectively. This work provides insights into strengthening the stability of the buried interface by engineering multidentate chelating ligand molecules.

Optimizing the Buried Interface in Flexible Perovskite Solar Cells to Achieve Over 24% Efficiency and Long-Term Stability.

The buried interface of the perovskite layer has a profound influence on its film morphology, defect formation, and aging resistance from the outset, therefore, significantly affects the film quality and device performance of derived perovskite solar cells. Especially for FAPbI3 , although it has excellent optoelectronic properties, the spontaneous transition from the black perovskite phase to nonperovskite phase tends to start from the buried interface at the early stage of film formation then further propagate to degrade the whole perovskite. In this work, by introducing ─NH3 + rich proline hydrochloride (PF) with a conjugated rigid structure as a versatile medium for buried interface, it not only provides a solid α-phase FAPbI3 template, but also prevents the phase transition induced degradation. PF also acts as an effective interfacial stress reliever to enhance both efficiency and stability of flexible solar cells. Consequently, a champion efficiency of 24.61% (certified 23.51%) can be achieved, which is the highest efficiency among all reported values for flexible perovskite solar cells. Besides, devices demonstrate excellent shelf-life/light soaking stability (advanced level of ISOS stability protocols) and mechanical stability.

Crystallization Control Based on the Regulation of Solvent-Perovskite Coordination for High-Performance Ambient Printable FAPbI3 Perovskite Solar Cells.

The critical requirement for ambient-printed formamidinium lead iodide (FAPbI3 ) lies in the control of nucleation-growth kinetics and defect formation behavior, which are extensively influenced by interactions between the solvent and perovskite. Here, a strategy is developed that combines a cosolvent and an additive to efficiently tailor the coordination between the solvent and perovskite. Through in situ characterizations, the direct crystallization from the sol-gel phase to α-FAPbI3 is illustrated. When the solvent exhibits strong interactions with the perovskite, the sol-gel phases cannot effectively transform into α-FAPbI3 , resulting in a lower nucleation rate and confined crystal growth directions. Consequently, it becomes challenging to fabricate high-quality void-free perovskite films. Conversely, weaker solvent-perovskite coordination promotes direct crystallization from sol-gel phases to α-FAPbI3 . This process exhibits more balanced nucleation-growth kinetics and restrains the formation of defects and microstrains in situ. This strategy leads to improved structural and optoelectronic properties within the FAPbI3 films, characterized by more compact grain stacking, smoother surface morphology, released lattice strain, and fewer defects. The ambient-printed FAPbI3 perovskite solar cells fabricated using this strategy exhibit a remarkable power conversion efficiency of 24%, with significantly reduced efficiency deviation and negligible decreases in the stabilized output.

Manipulation of Shallow-Trap States in Halide Double Perovskite Enables Real-Time Radiation Dosimetry.

Storage phosphors displaying defect emissions are indispensable in technologically advanced radiation dosimeters. The current dosimeter is limited to the passive detection mode, where ionizing radiation-induced deep-trap defects must be activated by external stimulation such as light or heat. Herein, we designed a new type of shallow-trap storage phosphor by controlling the dopant amounts of Ag+ and Bi3+ in the host lattice of Cs2NaInCl6. A distinct phenomenon of X-ray-induced emission (XIE) is observed for the first time in an intrinsically nonemissive perovskite. The intensity of XIE exhibits a quantitative relationship with the accumulated dose, enabling a real-time radiation dosimeter. Thermoluminescence and in situ X-ray photoelectron spectroscopy verify that the emission originates from the radiative recombination of electrons and holes associated with X-ray-induced traps. Theoretical calculations reveal the evolution process of Cl-Cl dimers serving as hole trap states. Analysis of temperature-dependent radioluminescence spectra provides evidence that the intrinsic electron-phonon interaction in 0.005 Ag+@ Cs2NaInCl6 is significantly reduced under X-ray irradiation. Moreover, 0.025 Bi3+@ Cs2NaInCl6 shows an elevated sensitivity to the accumulated dose with a broad response range from 0.08 to 45.05 Gy. This work discloses defect manipulation in halide double perovskites, giving rise to distinct shallow-trap storage phosphors that bridge traditional deep-trap storage phosphors and scintillators and enabling a brand-new type of material for real-time radiation dosimetry.

Intermediate Phase Free α-FAPbI3 Perovskite via Green Solvent Assisted Perovskite Single Crystal Redissolution Strategy.

Perovskite single-crystal redissolution (PSCR) strategy is highly desired for efficient formamidinium lead triiodide (FAPbI3 ) perovskite photovoltaics with enhanced phase purity, improved film quality, low trap-state density, and good stability. However, the phase transition and crystallization dynamics of FAPbI3 remain unclear in the PSCR process compared to the conventional fabrication from the mixing of precursor materials. In this work, a green-solvent-assisted (GSA) method is employed to synthesize centimeter-sized α-FAPbI3 single crystals, which serve as the high-purity precursor to fabricate perovskite films. The α-FAPbI3 PSCR strategy facilitates direct α-phase formation and inhibits the complex intermediate phases monitored by in situ grazing-incidence wide-angle X-ray scattering. Moreover, the α-phase stability is prolonged due to the relaxation of the residual lattice strain through the isotropic orientation phase growth. Consequently, the GSA-assisted PSCR strategy effectively promotes crystallization and suppresses non-radiative recombination in perovskite solar cells, which boosts the device efficiency from 22.08% to 23.92% with significantly enhanced open circuit voltage. These findings provide deeper insight into the PSCR process in terms of its efficacy in phase formation and lattice strain release. The green low-cost solvent may also offer a new and ideal solvent candidate for large-scale production of perovskite photovoltaics.

Tautomeric mixture coordination enables efficient lead-free perovskite LEDs.

Lead halide perovskite light-emitting diodes (PeLEDs) have demonstrated remarkable optoelectronic performance1-3. However, there are potential toxicity issues with lead4,5 and removing lead from the best-performing PeLEDs-without compromising their high external quantum efficiencies-remains a challenge. Here we report a tautomeric-mixture-coordination-induced electron localization strategy to stabilize the lead-free tin perovskite TEA2SnI4 (TEAI is 2-thiopheneethylammonium iodide) by incorporating cyanuric acid. We demonstrate that a crucial function of the coordination is to amplify the electronic effects, even for those Sn atoms that aren't strongly bonded with cyanuric acid owing to the formation of hydrogen-bonded tautomeric dimer and trimer superstructures on the perovskite surface. This electron localization weakens adverse effects from Anderson localization and improves ordering in the crystal structure of TEA2SnI4. These factors result in a two-orders-of-magnitude reduction in the non-radiative recombination capture coefficient and an approximately twofold enhancement in the exciton binding energy. Our lead-free PeLED has an external quantum efficiency of up to 20.29%, representing a performance comparable to that of state-of-the-art lead-containing PeLEDs6-12. We anticipate that these findings will provide insights into the stabilization of Sn(II) perovskites and further the development of lead-free perovskite applications.

In Situ Self-Elimination of Defects via Controlled Perovskite Crystallization Dynamics for High-Performance Solar Cells.

Understanding and controlling crystallization is crucial for high-quality perovskite films and efficient solar cells. Herein, the issue of defects in formamidinium lead iodide (FAPbI3 ) formation is addressed, focusing on the role of intermediates. A comprehensive picture of structural and carrier evolution during crystallization is demonstrated using in situ grazing-incidence wide-angle X-ray scattering, ultraviolet-visible spectroscopy and photoluminescence spectroscopy. Three crystallization stages are identified: precursors to the δ-FAPbI3 intermediate, then to α-FAPbI3 , where defects spontaneously emerge. A hydrogen-sulfate-based ionic liquid additive is found to enable the phase-conversion pathway of precursors → solvated intermediates → α-FAPbI3 , during which the spontaneous generation of δ-FAPbI3 can be effectively circumvented. This additive extends the initial growth kinetics and facilitates solvent-FA+ ion exchange, which results in the self-elimination of defects during crystallization. Therefore, the improved crystallization dynamics lead to larger grain sizes and fewer defects within thin films. Ultimately, the improved perovskite crystallization dynamics enable high-performance solar cells, achieving impressive efficiencies of 25.14% at 300 K and 26.12% at 240 K. This breakthrough might open up a new era of application for the emerging perovskite photovoltaic technology to low-temperature environments such as near-space and polar regions.

Crystallization Control for Ambient Printed FA-Based Lead Triiodide Perovskite Solar Cells.

Upscalable printing of high-performance and stable perovskite solar cells (PSCs) is highly desired for commercialization. However, the efficiencies of printed PSCs lag behind those of their lab-scale spin-coated counterparts owing to the lack of systematic understanding and control over perovskite crystallization dynamics. Here, the controlled crystallization dynamics achieved using an additive 1-butylpyridine tetrafluoroborate (BPyBF4 ) for high-quality ambient printed α-formamidinium lead triiodide (FAPbI3 ) perovskite films are reported. Using in situ grazing-incidence wide-angle X-ray scattering and optical diagnostics, the spontaneous formation of α-FAPbI3 from precursors during printing without the involvement of  Î´-FAPbI3 is demonstrated. The addition of BPyBF4 delays the crystallization onset of α-FAPbI3 , enhances the conversion from sol-gel to perovskite, and reduces stacking defects during printing. Therefore, the altered crystallization results in fewer voids, larger grains, and less trap-induced recombination loss within printed films. The printed PSCs yield high power conversion efficiencies of 23.50% and 21.60% for a 0.09 cm-2 area device and a 5 cm × 5 cm-area module, respectively. Improved device stability is further demonstrated, i.e., approximately 94% of the initial efficiency is retained for over 2400 h under ambient conditions without encapsulation. This study provides an effective crystallization control method for the ambient printing manufacture of large-area high-performance PSCs.

Green Solvent Polishing Enables Highly Efficient Quasi-2D Perovskite Solar Cells.

Preferred crystalline orientation at the surface of quasi-2D organic-inorganic halide perovskites is crucial to promote vertical carrier transport and interface carrier extraction, which further contribute to device efficiency and stability in photovoltaic applications. However, loose unoriented and defective surfaces are inevitably formed in the crystallization process, especially with the introduction of bulky organic cations into the quasi-2D perovskites. Here, a facile and effective surface polishing method using a natural-friendly green solvent, 2,2,2-trifluoroethanol, is proposed to reconstruct the surface. After solvent polishing, the randomly oriented phases containing trap sites on the surface are successfully removed, and the compact vertical-oriented phases underneath are revealed with less defectiveness and better smoothness, which greatly facilitates carrier transport and interfacial charge extraction. Consequently, the green solvent polished devices show a boosting efficiency of 18.38% with a high open-circuit voltage of 1.21 V. The devices also show improved storage and operational stability.

Crystallization and Orientation Modulation Enable Highly Efficient Doctor-Bladed Perovskite Solar Cells.

With the rapid rise in perovskite solar cells (PSCs) performance, it is imperative to develop scalable fabrication techniques to accelerate potential commercialization. However, the power conversion efficiencies (PCEs) of PSCs fabricated via scalable two-step sequential deposition lag far behind the state-of-the-art spin-coated ones. Herein, the additive methylammonium chloride (MACl) is introduced to modulate the crystallization and orientation of a two-step sequential doctor-bladed perovskite film in ambient conditions. MACl can significantly improve perovskite film quality and increase grain size and crystallinity, thus decreasing trap density and suppressing nonradiative recombination. Meanwhile, MACl also promotes the preferred face-up orientation of the (100) plane of perovskite film, which is more conducive to the transport and collection of carriers, thereby significantly improving the fill factor. As a result, a champion PCE of 23.14% and excellent long-term stability are achieved for PSCs based on the structure of ITO/SnO2/FA1-xMAxPb(I1-yBry)3/Spiro-OMeTAD/Ag. The superior PCEs of 21.20% and 17.54% are achieved for 1.03 cm2 PSC and 10.93 cm2 mini-module, respectively. These results represent substantial progress in large-scale two-step sequential deposition of high-performance PSCs for practical applications.

Lifetime over 10000 hours for organic solar cells with Ir/IrOx electron-transporting layer.

The stability of organic solar cells is a key issue to promote practical applications. Herein, we demonstrate that the device performance of organic solar cells is enhanced by an Ir/IrOx electron-transporting layer, benefiting from its suitable work function and heterogeneous distribution of surface energy in nanoscale. Notably, the champion Ir/IrOx-based devices exhibit superior stabilities under shelf storing (T80 = 56696 h), thermal aging (T70 = 13920 h), and maximum power point tracking (T80 = 1058 h), compared to the ZnO-based devices. It can be attributed to the stable morphology of photoactive layer resulting from the optimized molecular distribution of the donor and acceptor and the absence of photocatalysis in the Ir/IrOx-based devices, which helps to maintain the improved charge extraction and inhibited charge recombination in the aged devices. This work provides a reliable and efficient electron-transporting material toward stable organic solar cells.

One-stone-for-two-birds strategy to attain beyond 25% perovskite solar cells.

Even though the perovskite solar cell has been so popular for its skyrocketing power conversion efficiency, its further development is still roadblocked by its overall performance, in particular long-term stability, large-area fabrication and stable module efficiency. In essence, the soft component and ionic-electronic nature of metal halide perovskites usually chaperonage large number of anion vacancy defects that act as recombination centers to decrease both the photovoltaic efficiency and operational stability. Herein, we report a one-stone-for-two-birds strategy in which both anion-fixation and associated undercoordinated-Pb passivation are in situ achieved during crystallization by using a single amidino-based ligand, namely 3-amidinopyridine, for metal-halide perovskite to overcome above challenges. The resultant devices attain a power conversion efficiency as high as 25.3% (certified at 24.8%) with substantially improved stability. Moreover, the device without encapsulation retained 92% of its initial efficiency after 5000 h exposure in ambient and the device with encapsulation retained 95% of its initial efficiency after >500 h working at the maximum power point under continuous light irradiation in ambient. It is expected this one-stone-for-two-birds strategy will benefit large-area fabrication that desires for simplicity.

Symmetry-Broken 2D Lead-Tin Mixed Chiral Perovskite for High Asymmetry Factor Circularly Polarized Light Detection.

Symmetry-broken-induced spin splitting plays a key role for selective circularly polarized light absorption and spin carrier transport. Asymmetrical chiral perovskite is rising as the most promising material for direct semiconductor-based circularly polarized light detection. However, the increase of asymmetry factor and extension of response region remain to be a challenge. Herein, we fabricated a two-dimensional tin-lead mixed chiral perovskite with tunable absorption in the visible region. Theoretical simulation indicates that the mixing of the tin and lead in chiral perovskite breaks the symmetry of the pure ones, resulting in pure spin splitting. We then fabricated a chiral circularly polarized light detector based on this tin-lead mixed perovskite. A high asymmetry factor for the photocurrent of 0.44 is achieved, which is 144% higher than pure lead 2D perovskite, and it is the highest value reported for the pure chiral 2D perovskite-based circularly polarized light detector using a simple device structure.

Orientated crystallization of FA-based perovskite via hydrogen-bonded polymer network for efficient and stable solar cells.

Incorporating mixed ion is a frequently used strategy to stabilize black-phase formamidinum lead iodide perovskite for high-efficiency solar cells. However, these devices commonly suffer from photoinduced phase segregation and humidity instability. Herein, we find that the underlying reason is that the mixed halide perovskites generally fail to grow into homogenous and high-crystalline film, due to the multiple pathways of crystal nucleation originating from various intermediate phases in the film-forming process. Therefore, we design a multifunctional fluorinated additive, which restrains the complicated intermediate phases and promotes orientated crystallization of α-phase of perovskite. Furthermore, the additives in-situ polymerize during the perovskite film formation and form a hydrogen-bonded network to stabilize α-phase. Remarkably, the polymerized additives endow a strongly hydrophobic effect to the bare perovskite film against liquid water for 5 min. The unencapsulated devices achieve 24.10% efficiency and maintain >95% of the initial efficiency for 1000 h under continuous sunlight soaking and for 2000 h at air ambient of ~50% humid, respectively.