The cultivable gut bacteria Enterococcus mundtii promotes early-instar larval growth of Conogethes punctiferalis via enhancing digestive enzyme activity.

BACKGROUND: Gut bacteria are crucial in influencing insect development and even phenotypic plasticity. The yellow peach moth Conogethes punctiferalis, as a significant borer pest, has been the subject of limited reports regarding the structural and diversification changes in its gut microbiota during feeding, and their potential impacts on the growth and development of the host insects. RESULTS: This study, employing 16S rRNA sequencing, demonstrates distinct shifts in the larvae gut microbiome of C. punctiferalis between different feeding stages, highlighting a pronounced diversity in the early-instar with Enterococcus as a predominant genus in laboratory populations. Through in vitro cultivation and sequencing, three bacterial strains - Micrococcus sp., Brevibacterium sp. and Enterococcus mundtii - were isolated and characterized. Bioassays revealed that E. mundtii-infused corn significantly boosts early-instar larval growth, enhancing both body length and weight. Quantitative PCR and spectrophotometry confirmed a higher abundance of E. mundtii in younger larvae, correlating with increased digestive enzyme activity and total protein levels. CONCLUSION: This study reveals the heightened gut microbiota diversity in early instars of C. punctiferalis larvae, highlighting that Enterococcus represent a predominant bacteria in laboratory populations. In vitro cultivation and bioassays unequivocally demonstrate the significant role of the cultivable gut bacteria E. mundtii in promoting the growth of early-instar larva. These findings provide a solid theoretical foundation for advancing the comprehension of the intricate interactions between gut microbiota and insect hosts, as well as for the development of eco-friendly pest control technologies based on targeted manipulation of insect gut microbial communities. © 2024 Society of Chemical Industry.

Effects of different polysaccharide colloids on the structure and physicochemical properties of peanut protein and wheat gluten composite system under extrusion.

The structure and physicochemical properties of the complex system of peanut protein and gluten with different concentrations (0 %, 0.5 %, 1 %, and 2 %) of carboxymethyl cellulose (CMC) or sodium alginate (SA) under high-moisture extrusion were studied. The water absorption index and low-field nuclear magnetic resonance showed that adding 0.5 % SA could significantly improve the water uniformity of peanut protein extrudates, while the increase in water absorption was not significant. The texture properties showed that adding CMC or SA increased the hardness, vertical shearing force, and parallel shearing force of the system. Furthermore, adding 0.5 % SA increased approximately 33 % and 75.2 % of the tensile distance and strength of the system, respectively. The secondary structure showed that CMC or SA decreased the proportion of α-helix, ß-turn, and random coil, while increased ß-sheet proportion. The results of hydrophobicity, unextractable protein, and endogenous fluorescence revealed that CMC and SA reduced the surface hydrophobicity of the system and caused fluorescence quenching in the system. Additionally, it was found that CMC generally increased the free sulfhydryl group content, while SA exhibited the opposite effect.

Protein function annotation and virulence factor identification of Klebsiella pneumoniae genome by multiple machine learning models.

Klebsiella pneumoniae is a type of Gram-negative bacterium which can cause a range of infections in human. In recent years, an increasing number of strains of K. pneumoniae resistant to multiple antibiotics have emerged, posing a significant threat to public health. The protein function of this bacterium is not well known, thus a systematic investigation of K. pneumoniae proteome is in urgent need. In this study, the protein functions of this bacteria were re-annotated, and their function groups were analyzed. Moreover, three machine learning models were built to identify novel virulence factors. Results showed that the functions of 16 uncharacterized proteins were first annotated by sequence alignment. In addition, K. pneumoniae proteins share a high proportion of homology with Haemophilus influenzae and a low homology proportion with Chlamydia pneumoniae. By sequence analysis, 10 proteins were identified as potential drug targets for this bacterium. Our model achieved a high accuracy of 0.901 in the benchmark dataset. By applying our models to K. pneumoniae, we identified 39 virulence factors in this pathogen. Our findings could provide novel clues for the treatment of K. pneumoniae infection.

Versatile Design of NO-Generating Proteolipid Nanovesicles for Alleviating Vascular Injury.

Vascular injury is central to the pathogenesis and progression of cardiovascular diseases, however, fostering alternative strategies to alleviate vascular injury remains a persisting challenge. Given the central role of cell-derived nitric oxide (NO) in modulating the endogenous repair of vascular injury, NO-generating proteolipid nanovesicles (PLV-NO) are designed that recapitulate the cell-mimicking functions for vascular repair and replacement. Specifically, the proteolipid nanovesicles (PLV) are versatilely fabricated using membrane proteins derived from different types of cells, followed by the incorporation of NO-generating nanozymes capable of catalyzing endogenous donors to produce NO. Taking two vascular injury models, two types of PLV-NO are tailored to meet the individual requirements of targeted diseases using platelet membrane proteins and endothelial membrane proteins, respectively. The platelet-based PLV-NO (pPLV-NO) demonstrates its efficacy in targeted repair of a vascular endothelium injury model through systemic delivery. On the other hand, the endothelial cell (EC)-based PLV-NO (ePLV-NO) exhibits suppression of thrombosis when modified onto a locally transplanted small-diameter vascular graft (SDVG). The versatile design of PLV-NO may enable a promising therapeutic option for various vascular injury-evoked cardiovascular diseases.

Pea protein/carboxymethyl cellulose complexes prepared using a pH cycle strategy as stabilizers of high internal phase emulsions for 3D printing.

The development of food-grade high internal phase emulsions (HIPEs) for 3D printing and the replacement of animal fats have attracted considerable attention. In this study, in order to improve the rheological properties and stability of pea protein to prepare HIPE, pea protein/carboxymethyl cellulose (pH-PP/CMC) was prepared and subjected to pH cycle treatment to produce HIPEs. The results showed that pH cycle treatment and CMC significantly reduced the droplet size of HIPEs (from 143.33 to 12.10 µm). At higher CMC concentrations, the interfacial tension of the PP solution decreased from 12.84 to 11.71 mN/m without pH cycle treatment and to 10.79 mN/m with pH cycle treatment. The HIPEs with higher CMC concentrations subjected to pH cycle treatment showed shear thinning behavior and higher viscoelasticity and recovered their solid-like properties after being subjected to 50 % strain, indicating that they could be used for 3D printing. The 3D printing results showed that the pH-PP/CMC HIPE with 0.3 % CMC had the finest structure. Our work provides new insights into developing food-grade HIPEs and facilitating their use in 3D printing inks as nutrient delivery systems and animal fat substitutes.

A case report of sepsis associated coagulopathy after percutaneous nephrostomy.

BACKGROUND: Hemorrhage is a common complication of nephrostomy and percutaneous nephrolithotripsy, and it is caused by surgical factors. Here we report a rare case of hemorrhage caused by sepsis-related coagulation dysfunction. CASE PRESENTATION: A 72-years-old male patient with bilateral ureteral calculi accompanied by hydronephrosis and renal insufficiency developed sepsis and hemorrhage on the third day after bilateral nephrostomy. After vascular injury was excluded by DSA, the hemorrhage was considered to be sepsis-associated coagulopathy(SAC/SIC), finally the patient recovered well after active symptomatic treatment. CONCLUSIONS: In patients with sepsis and hemorrhage, SAC/SIC cannot be excluded even if coagulation function is slightly abnormal after surgical factors are excluded. For urologists who may encounter similar cases in their general urology practice, it is important to be aware of these unusual causes of hemorrhage.

Effect of different molecular weight ß-glucan hydrated with highland barley protein on the quality and in vitro starch digestibility of whole wheat bread.

Whole wheat bread has high nutritional value, but it has inferior baking quality and high glycemic index, which needs to be improved by methods such as adding protein and ß-glucan. This study investigated the effects of ß-glucan and highland barley protein of different molecular weights (2 × 104, 1 × 105, and 3 × 105 Da) and different hydrate methods (pre-hydrate and not pre-hydrate) on the characteristics of whole wheat dough and bread. The mixing properties and rheological properties demonstrated that ß-glucan pre-hydrated with highland barley protein were able to reduce the dough tan δ, reduce the dough viscoelasticity, while enhance the gluten network structure and dough deformation resistance. Compared to the control sample, the medium molecular weight pre-hydrate bread had a better specific volume of 3.21 mL/g, lower hardness of 527.28 g. In vitro starch digestion characteristics and ATR-FTIR showed that low and high molecular weight pre-hydrate increased the short-range ordered structure of starch and reduced the starch digestibility, while not pre-hydrated medium molecular weight hydrate had the lowest level of starch digestibility.

Effect of electroacupuncture on neuronal programmed necrosis by regulating RIP1/RIP3/MLKL pathway in rats with cerebral ischemia reperfusion injury. / 电针调节RIP1/RIP3/MLKLé€šè·¯å¯¹è„‘ç¼ºè¡€å†çŒæ³¨æŸä¼¤å¤§é¼ ç¥žç»å ƒç¨‹åºæ€§åæ­»çš„å½±å“.

OBJECTIVES: To investigate the neuroprotective effect of electroacupuncture (EA) at "Quchi"(LI11) and "Zusanli"(ST36) in the rats with cerebral ischemia reperfusion injury and its influence on programmed necrosis of cerebral cortical neurons. METHODS: Sixty male SD rats were randomly divided into sham-operation group, model group, EA group and inhibitor group, with 15 rats in each group. Left middle cerebral artery occlusion model was established using the modified thread embolism method. In the sham-operation group, the carotid artery was exposed and dissociated in each rat. EA was applied to "Quchi"(LI11) and "Zusanli"(ST36) on the right side for 30 min each time, once daily for 7 days in the rats of the EA group. The rats in the inhibitor group were intraperitoneally injected with norstatin-1 (0.6 mg/kg) for consecutive 7 days. The neurological deficit score of rats in each group was observed. HE staining was adopted to detect the degree of pathological damage of the cerebral cortex in the infarction area. Using TUNEL staining, the apoptosis of cortical neurons in the infarction area was determined；the contents of tumor necrosis factor α (TNF-α), interleukin (IL)-1ß and IL-6 were detected by ELISA；the mRNA and protein expression of the receptor interacting protein-1 (RIP1), the receptor interacting protein-3 (RIP3) and the substrate mixed lineage kinase like protein (MLKL) were detected by fluorescence quantitative PCR and Western blot, respectively. RESULTS: In comparison with the sham-operation group, the neurological deficit score in the model group was higher(P<0.01)；HE staining showed that there was the pathological damage in the infarction area；the neuron apoptosis rate, the contents of TNF-α, IL-1ß and IL-6, and the mRNA and protein expressions of RIP1, RIP3 and MLKL increased(P<0.01) in the model group. In the EA group, the neurological deficit score was reduced(P<0.01)；HE staining showed that the pathological damage was ameliorated in the infarction area；the neuron apoptosis rate, the contents of TNF-α, IL-1ß and IL-6, and the mRNA and protein expressions of RIP1, RIP3, MLKL decreased(P<0.05, P<0.01) when compared with those in the model group. CONCLUSIONS: EA can attenuate cerebral ischemia reperfusion injury and display its neuroprotective effect probably through inhibiting programmed necrosis of cerebral cortical neurons in the rats.

Activating astrocytic α2A adrenoceptors in hippocampus reduces glutamate toxicity to attenuate sepsis-associated encephalopathy in mice.

BACKGROUND: Glutamate metabolism disorder is an important mechanism of sepsis-associated encephalopathy (SAE). Astrocytes regulate glutamate metabolism. In septic mice, α2A adrenoceptor (α2A-AR) activation in the central nervous system provides neuroprotection. α2A-ARs are expressed abundantly in hippocampal astrocytes. This study was performed to determine whether hippocampal astrocytic α2A-AR activation confers neuroprotection against SAE and whether this protective effect is astrocyte specific and achieved by the modulation of glutamate metabolism. METHODS: Male C57BL/6 mice with and without α2A-AR knockdown were subjected to cecal ligation and puncture (CLP). They were treated with intrahippocampal guanfacine (an α2A-AR agonist) or intraperitoneal dexmedetomidine in the presence or absence of dihydrokainic acid [DHK; a glutamate transporter 1 (GLT-1) antagonist] and/or UCPH-101 [a glutamate/aspartate transporter (GLAST) antagonist]. Hippocampal tissue was collected for the measurement of astrocyte reactivity, GLT-1 and GLAST expression, and glutamate receptor subunit 2B (GluN2B) phosphorylation. In vivo real-time extracellular glutamate concentrations in the hippocampus were measured by ultra-performance liquid chromatography tandem mass spectrometry combined with microdialysis, and in vivo real-time hippocampal glutamatergic neuron excitability was assessed by calcium imaging. The mice were subjected to the Barnes maze and fear conditioning tests to assess their learning and memory. Golgi staining was performed to assess changes in the hippocampal synaptic structure. In vitro, primary astrocytes with and without α2A-AR knockdown were stimulated with lipopolysaccharide (LPS) and treated with guanfacine or dexmedetomidine in the presence or absence of 8-bromo- cyclic adenosine monophosphate (8-Br-cAMP, a cAMP analog). LPS-treated primary and BV2 microglia were also treated with guanfacine or dexmedetomidine. Astrocyte reactivity, PKA catalytic subunit, GLT-1 an GLAST expression were determined in primary astrocytes. Interleukin-1ß, interleukin-6 and tumor necrosis factor-alpha in the medium of microglia culture were measured. RESULTS: CLP induced synaptic injury, impaired neurocognitive function, increased astrocyte reactivity and reduced GLT-1 and GLAST expression in the hippocampus of mice. The extracellular glutamate concentration, phosphorylation of GluN2B at Tyr-1472 and glutamatergic neuron excitability in the hippocampus were increased in the hippocampus of septic mice. Intraperitoneal dexmedetomidine or intrahippocampal guanfacine administration attenuated these effects. Hippocampal astrocytes expressed abundant α2A-ARs; expression was also detected in neurons but not microglia. Specific knockdown of α2A-ARs in hippocampal astrocytes and simultaneous intrahippocampal DHK and UCPH-101 administration blocked the neuroprotective effects of dexmedetomidine and guanfacine. Intrahippocampal administration of DHK or UCPH-101 alone had no such effect. In vitro, guanfacine or dexmedetomidine inhibited astrocyte reactivity, reduced PKA catalytic subunit expression, and increased GLT-1 and GLAST expression in primary astrocytes but not in primary astrocytes that received α2A-AR knockdown or were treated with 8-Br-cAMP. Guanfacine or dexmedetomidine inhibited microglial reactivity in BV2 but not primary microglia. CONCLUSIONS: Our results suggest that neurocognitive protection against SAE after hippocampal α2A-AR activation is astrocyte specific. This protection may involve the inhibition of astrocyte reactivity and alleviation of glutamate neurotoxicity, thereby reducing synaptic injury. The cAMP/protein kinase A (PKA) signaling pathway is a potential cellular mechanism by which activating α2A-AR modulates astrocytic function.

The impact of different soluble endogenous proteins and their combinations with ß-glucan on the in vitro digestibility, microstructure, and physicochemical properties of highland barley starch.

The impacts of protein types and its interaction with ß-glucan on the in vitro digestibility of highland barley starch were investigated through analyzing physicochemical and microstructural properties of highland barley flour (HBF) after sequentially removing water- (WP), salt- (SP), alcohol- (AP) and alkali-soluble (AlkP) proteins. Resistant starch (RS) increased significantly in HBF after removing WP and SP, and RS of HBF was lower than that of without ß-glucan. After removing WP, SP and AP, swelling powers of HBF without ß-glucan (9.33-9.77) were higher than those of HBF (12.09-15.95). Trends of peak viscosity and peak temperature (thermal degradation temperature) were similar as swelling power, and HBF without AP showed the highest peak temperature (310.33 °C). Removals of different proteins improved the crystalline structure and short-range order of starch. There was a blue shift in T2 values and an opposite change in free water proportion. The matrix on starch surface was mainly formed by AP and AlkP, which could be aggregated by ß-glucan. But, the inhibitory effect of AP or AlkP was stronger than that of proteins combined with ß-glucan. These results help in the development of starch-based foods with different digestive properties by combining different protein types with ß-glucan.

Understanding the mechanisms of ß-glucan regulating the in vitro starch digestibility of highland barley starch under spray drying: Structure and physicochemical properties.

This study investigated the effects of ß-glucan (0-6%) on the physicochemical properties, structure, and in vitro digestibility of highland barley starch (HBS) under spray drying (SD). SD significantly enhanced the inhibitory effect of 6% ß-glucan on the in vitro digestibility and glucose diffusion of HBS. After SD, the addition of ß-glucan at 4% and 6% concentration significantly increased the pasting temperatures of starch while decreased the rheological properties. Thermal properties demonstrated that ß-glucan improved the thermal stability and residue content of HBS at 600°C, lowered its maximum loss rate, and maintained its thermal stability after SD. Structural properties showed that ß-glucan affected greatly on amorphous regions of HBS after SD. Additionally, ß-glucan dispersed more evenly in the starch system and experienced hydrogen bonding with starch after SD. This study presents a novel approach to enhancing the inhibitory effect of ß-glucan on starch digestion.

Regulation of baking quality and starch digestibility in whole wheat bread based on ß-glucans and protein addition strategy: Significance of protein-starch-water interaction in dough.

Whole wheat bread has high nutritional value but is characterized by inferior quality and a high glycemic index. Studies have shown that adding ß-glucans and protein can improve bread quality. This study investigated the effects of added oat ß-glucan, barley ß-glucan, or yeast ß-glucan on protein synergy and whole wheat dough and bread quality. The mixing properties, rheological properties, and scanning electron microscopy observations showed that the addition of ß-glucan promoted the formation of gluten networks, while the synergy between the wheat proteins and ß-glucan resulted in a more robust and stable gluten network and a stronger physical starch envelope. Rapid visco-analysis and thermal property evaluations showed that ß-glucan addition inhibited the thermal degradation, gelatinization, and retrogradation of starch. Based on the bread quality results, it was found the ß-glucan could cause some damage to the bread baking quality. For example, the hardness of samples with oats, barley, and yeast increased to 881.69 g, 952.97 g, and 631.75 g, respectively, compared to samples without ß-glucan (317.49 g), whereas the inclusion of yeast ß-glucan proved to be less detrimental. Protein and ß-glucan both reduced starch digestion to some degree, and showed better synergistic effects, with the lowest estimated glycemic index of 70.08 observed in bread containing added yeast ß-glucan and protein. Therefore, yeast ß-glucan and protein mixtures could be selected as viable formulations for enhancing the quality of whole wheat bread.

Evaluating personalized circulating tumor DNA detection for early-stage lung cancer.

Circulating tumor DNA (ctDNA) has been widely used as a minimally invasive biomarker in clinical routine. However, a number of factors such as panel design, sample quality, patients' disease stages are known to influence ctDNA detection sensitivity. In this study, we systematically evaluated common factors associated with the variability of ctDNA detection in plasma and investigated ctDNA abundance in bronchoalveolar lavage (BAL). Whole exome profiling was conducted on 61 tumor tissue samples to identify tumor-specific variants, which were then used to design personalized assay MarRyDa® for ctDNA detection. DNA extracted from BAL fluid and plasma were genotyped using MarRyDa® platform. Our analysis showed that histological subtypes and disease stages had significant differences in ctDNA detection rate. Furthermore, we found that DNA purified from BAL supernatants contains the highest levels of ctDNA compared with BAL precipitates and plasma; therefore, utilizing BAL supernatants for tumor detection might provide additional benefits. Finally, we demonstrated that tumor cellularity played significant roles in the design of personalized ctDNA panel which eventually impacts ctDNA detection sensitivity. We suggest setting a flexible criteria for sample quality control and utilization of BAL might benefit more patients in clinics.

Rheology and stability mechanism of pH-responsive high internal phase emulsion constructed gel by pea protein and hydroxypropyl starch.

There is an increasing demand for stable, highly viscoelastic, and printable emulsion gels based on pea protein (PeaP) as a substitute for animal fat. In this article, a simple pH modulation strategy was applied to regulate high internal phase (HIPE) gels prepared from PeaP and hydroxypropyl starch (HPS). The results showed that the interfacial tension of PeaP decreased from 11.9 to 7.1 mN/m at 5% PeaP and from 9.9 to 6.3 mN/m at 10% PeaP with increasing pH from 7 to 11. The incorporation of HPS improved the strength and physical stability of the HIPE gel. HIPE gels showed the best three-dimensional printing ability at pH 11. The main mechanism of HIPE gels at pH 3 was hydrophobic interaction, while electrostatic interaction dominated at pH 7, 9, and 11. This study may provide insights into the development of PeaP-based HIPE gels as a printable fat alternative.

Mechanisms of rice protein hydrolysate regulating the in vitro digestibility of rice starch under extrusion treatment in terms of structure, physicochemical properties and interactions.

The effect of protein hydrolysates on starch digestibility has been observed in other heat treatments but has yet to be extensively researched under extrusion. This study aimed to analyze the physicochemical properties, structure, and starch digestibility of extruded rice starch-protein hydrolysate (ERS-RPH) complexes prepared by extrusion treatment. The resistant starch contents of ERS-RPH (12.30 %-19.36 %) were higher than those of extruded starch alone (6.33 %). The interaction forces, physical barrier effects, and enzyme inhibition indicated that RPHs at varying hydrolysis degrees hindered starch digestibility by reducing its contact with enzyme and via adhesion and hydrogen bonding with starch. RPHs with higher hydrolysis exhibited greater inhibition of starch digestibility, limiting the swelling power of starch and the leaching of amylose, thereby improving the thermal stability of starch. Fourier transform infrared spectroscopy results revealed the presence of hydrogen bonding interactions between RPHs and starch in complexes, intensifying the ordered structure of starch. Extrusion caused an increase of 6.8 %-10.8 % in the relative crystallinity of ERS-RPH compared to extruded starch alone. Moreover, the strength of V-type structure was reinforced after extrusion. These results enhanced comprehension of how PRHs regulate starch digestibility under extrusion, and offer direction for producing slow-digesting foods.

Micro-nanofiber composite biomimetic conduits promote long-gap peripheral nerve regeneration in canine models.

Peripheral nerve injuries may result in severe long-gap interruptions that are challenging to repair. Autografting is the gold standard surgical approach for repairing long-gap nerve injuries but can result in prominent donor-site complications. Instead, imitating the native neural microarchitecture using synthetic conduits is expected to offer an alternative strategy for improving nerve regeneration. Here, we designed nerve conduits composed of high-resolution anisotropic microfiber grid-cordes with randomly organized nanofiber sheaths to interrogate the positive effects of these biomimetic structures on peripheral nerve regeneration. Anisotropic microfiber-grids demonstrated the capacity to directionally guide Schwann cells and neurites. Nanofiber sheaths conveyed adequate elasticity and permeability, whilst exhibiting a barrier function against the infiltration of fibroblasts. We then used the composite nerve conduits bridge 30-mm long sciatic nerve defects in canine models. At 12 months post-implant, the morphometric and histological recovery, gait recovery, electrophysiological function, and degree of muscle atrophy were assessed. The newly regenerated nerve tissue that formed within the composite nerve conduits showed restored neurological functions that were superior compared to sheaths-only scaffolds and Neurolac nerve conduit controls. Our findings demonstrate the feasibility of using synthetic biophysical cues to effectively bridge long-gap peripheral nerve injuries and indicates the promising clinical application prospects of biomimetic composite nerve conduits.

Impact of pH on pea protein-hydroxypropyl starch hydrogel based on interpenetrating network and its application in 3D-printing.

Improving the mechanical and 3D printing performance of pea protein (PeaP) hydrogels contributes to the development of innovative plant-based gel products. Herein, we proposed a strategy for constructing PeaP-hydroxypropyl starch (HPS) interpenetrating network hydrogels, in which the structure, strength, and 3D printing properties of the hydrogels were regulated by changing pH. Results showed that pH significantly affected the gelation process of PeaP/HPS hydrogels. The hydrogels formed a lamellar structure at pH 3, a granule aggregation network structure at pH 5, porous structures at pH 7 and 9, and a honeycomb structure at pH 11. The strength of hydrogels formed at different pH values had the following order: pH 3 ＞pH 11 ＞ pH 7 ＞pH 9 ＞pH 5. The storage modulus (G') of the hydrogel at pH 3 was up to 4149 Pa, but only 695 Pa at pH 5. Moreover, hydrogel at pH 3 had the best self-recovery of 55%. 3D printed objects from gel inks at pH 3 exhibited high structural integrity and fidelity at 60 °C. Gelling force analysis indicated hydrogen bonds were the dominant interaction within all hydrogels. Overall, this study suggested that PeaP/HPS hydrogel formed at pH 3 possessed the most excellent mechanical properties and 3D printing capabilities, which may provide insights into the development of novel PeaP-based gel food ingredients and promote the application of PeaP in the food industry.

Effect of Wheat Gluten and Peanut Protein Ratio on the Moisture Distribution and Textural Quality of High-Moisture Extruded Meat Analogs from an Extruder Response Perspective.

Wheat gluten (WG) and peanut protein powder (PPP) mixtures were extruded at high moisture to investigate the potential application of this mixture in meat analog production. Multiple factors, including the water absorption index (WAI), water solubility index (WSI), rheological properties of the mixed raw materials, die pressure, torque and specific mechanical energy (SME) during high moisture extrusion, texture properties, color, water distribution, and water activity of extrudates were analyzed to determine the relationships among the raw material characteristics, extruder response parameters, and extrudate quality. At a WG ratio of 50%, the extrudates have the lowest hardness (2.76 kg), the highest springiness (0.95), and a fibrous degree of up to 1.75. The addition of WG caused a significant rightward shift in the relaxation time of hydrogen protons in the extrudates, representing increased water mobility and water activity. A ratio of 50:50 gave the smallest total color difference (ΔE) (about 18.12). When the added amount of WG was 50% or less, it improved the lightness and reduced the ΔE compared to >50% WG. Therefore, clarifying the relationship among raw material characteristics, extruder response parameters, and extruded product quality is helpful in the systematic understanding and regulation of the fiber textural process of binary protein meat analogs.

A hydroxypropyl methylcellulose/hydroxypropyl starch nanocomposite film reinforced with chitosan nanoparticles encapsulating cinnamon essential oil: Preparation and characterization.

Active packaging derived from polysaccharides plays an important role in prolonging the shelf life of food. In this study, cinnamon essential oil (CEO)-loaded chitosan nanoparticles (CNs) were prepared and embedded in hydroxypropyl methylcellulose (HPMC)/hydroxypropyl starch (HPS) blends to enhance the physicochemical and biofunctional properties of the formed films. Different concentrations (5, 10, 15, and 20 µL/mL) of CEOs were encapsulated with CNs to form CEO-CNs, as confirmed by Fourier Transform Infrared Spectrometer (FTIR), X-Ray Diffraction (XRD), and scanning electron microscope (SEM) images. The prepared CEO-CNs were incorporated into the HPMC/HPS film-forming matrix to prepare reinforced nanocomposite films. SEM images showed that the CEO-CNs were dispersed in the HPMC/HPS matrix, thus filling the void space in the composite matrix and significantly improving the mechanical and barrier properties of the bio-nanocomposite films. The elongation at break of the reinforced films improved from 8.54 ± 0.53 MPa to 24.81 ± 0.47 MPa, and the water vapor permeability was reduced by nearly 30 %. FTIR and XRD analyses indicated the formation of hydrogen bonds between CEO-CNs and HPMC/HPS polymer molecules. Release studies showed that the nanocomposite film was capable of sustained release of CEO, which imparted antioxidant (radical scavenging activity of 27.66-42.19 %) and antimicrobial properties (inhibition of Escherichia coli and Aspergillus flavus growth). Therefore, these HPMC/HPS nanocomposite films with enhanced properties may have great potential for food preservation.

Effect of fermentation methods on properties of dough and whole wheat bread.

BACKGROUND: Whole wheat bread is high in nutritional value but poor in technological quality; therefore, research on how to improve its technological quality has attracted extensive attention. The effects of fermentation methods, including straight dough(STD), sourdough (SOD), sponge dough (SPD), and refrigerated SPD (RSD) methods, on the dough and bread quality of whole wheat bread were investigated, focusing on pasting properties, rheological properties, thermal properties, microstructure, basic quality, and starch digestibility. RESULTS: The rapid viscosity analysis and rheological results demonstrated that SOD had the highest pasting temperature and the lowest viscosity, indicating an inhibition of starch pasting and partial protein hydrolysis, whereas the opposite trend presented by SPD and RSD indicated a greater starch hydration and a stronger gluten network. Thermal gravimetric analysis and differential scanning calorimetry results indicated reduced starch thermal degradation and increased starch pasting enthalpy in SOD and RSD. Scanning electron microscopy images revealed that the starch granules of SOD and RSD were tightly wrapped by a gluten network. SOD and RSD breads had the largest specific volume, the softest texture, and the lowest glycemic index. CONCLUSION: The effects of different fermentation methods on dough and bread structure can provide instructive information for future studies on their applications in whole wheat bread production. © 2023 Society of Chemical Industry.